Balance work of link road from Harijan Basti Shanand to Sheel Km.0/000 to 3/000

Amount

Excavation in soil in hill area by manual means/mechanical means including cutting and trimming of side slope and disposing of excavated earth with in all leads and lifts as per drawing and technical specification clause 1603.10 as per direction of the Engineer-in-charge.

Earth work in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing removal of stumps and other deleterious material and disposal upto all leads and lifts dressing of sides and bottom backfilling in trenches with excavated suitable materials upto all leads and lifts as per directions of the Engineer-in-Charge.

Providing and laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802,803,1202 and 1203 P.C.C nominal mix 1:6:12(40mm aggregate) including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203) P.C.C nominal mix 1:5:10 (40mm aggregates) including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications clause 802,803,1202 & 1203 P.C.C. grade M 10 nominal mix 1:3:6 (1 cement : 3 sad : 6 graded stone aggregate 25mm nominal size ) and curing complete.including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection work, back filling, concrete and masonry work in head walls and parapets clause 1108, 900mm including entire carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge.

Providing and laying of boulder apron laid in wire crates with 4mm dia GI wire conforming to IS:280 and IS: 4826 in 100mm x100mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg. each as per drawing and technical specification Clause 1301 including entire carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge.

Providing weapholes in brick masonry/stone masonry/plain reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full width of the structures with slop of 1 (v):20(H) towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7 including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Back filling behind abutment, retaining wall/breast wall including entire carriage of materials through all modes of transportation with in all leads and lifts as per direction of the Engineer-in-Charge.

Preparation of sub grade by dressing to camber (Earth work for the cutting involved for sub-grade to be paid for separately depending upon the classification of soil completed as per HP.PWD specifications including entire carriage of materials in all leads and lifts.as per directions of the Engineer-in-Charge.

Consolidation of sub grade with road roller including making good the undulation etc. with earth or quarry soil etc. and re-rolling the sub-grade completed as per HP.PWD specifications including entire carriage of materials in all leads and lifts.as per directions of the Engineer-in-Charge.

Stone soling properly hand packed filling interstices with Kharanja stone and consolidating with power road roller to the required gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification 150mm spread thickness (finished work including materials and labour) including entire carriage of materials in all leads and lifts.as per directions of the Engineer-in-Charge.

VIKAS THAKUR