Face lifting of Directorate office Horticulture P and M by way nof painting and other allied works at Narwal jammu

Amount

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer -in-charge:In cement mortar.

Brick work with Common brunt clay (non-modular) bricks of class designation 7.5 in super-structure above plinth upto floor V level including curing in: cement mortar 1:6 ( 1 cement : 6 coarse sand) (Including all carriages and leads).

12 mm cement plaster of mix: 1:6 ( 1 cement : 6 fine sand) (Including all carriages and leads).

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats. Architrave, holdfasts etc. complete and stacking within 50 meters lead: Of area of 3 sqm. And below.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead: Of area of 3 sqm and below

Providing wood work in frames of doors, windows , clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fasteners shall be paid for separately) : Sal wood.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade . Two or more coats on new work.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm).

Removing dry or oil bound distenper . Water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness,of approved brand and manufactureer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper whape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 ( 1 cement : 4 fine sand) (Including all carriages and leads).

Providing and fixing 35mm thick panelled or panelled and glazed shutters for doors, Windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. ( Note:- Butt hinges and necessary screws shall be paid separately) Second class deodar wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows(Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. plain particle board flat pressed. 3 layer or graded wood particle board medium density Grade I, IS:3087 marked.

Providing and fixing 30mm thick glazed shutters for doors , windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Deodar wood.

Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work.(wood work)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work.(Steel work)

Renewing glass panes, with putty and nails wherever necessary including raking out old putty.Float glass panes of thickness 4.0 mm (wight not less than 10kg/sqm)

Providing and fixing of aluminum Handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Providing and fixing of aluminum tower holts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250x16 mm

Providing and fixing of aluminium hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Single rubber.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded , built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e, at top bottom and sides with required EPDM rubber/ neoprene gasket felt etc. Aluminium sections shall be smooth rust free, straight , mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for galzing/ pancelling. C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge(glazing, panelling and dash fasteners to be paid for separately. Polyester Powder coated aluminium ( minium thickness of polyester powder coated 50 microns)

For fixed portion.Polyester powder coated aluminium ( minimum thickness of polyester powder coated 50 microns)

For shutters of doors, windows & ventilators including providing and fixing hings / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Polyester powder coated aluminium ( minimum thickness of polyester powder coated 50 microns)

Providing and fixing glazing in aluminum door, window , ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .)cost of aluminum snap heading shall be paid in basic items) WIth floating glass panes of 4.0 mm thickness (weight not less than 12.50 kg/sqm.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or grade wood particle board (conforming to IS: 12823 Grade-I type II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P.brass/stainless steel screws etc. complete as per architural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing Brass 100mm mortice latch and lock with 6leavers without pair of hancles ( best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete

Providing and fixing white vireous china pedestal type water closer (European type W.C.pan) with seat and lid , 10 liter low level white P.V.C. flushing cistern, including flush piper with manually controlled device (handle lever), conformings to IS:7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C.pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P brass pillar taps , 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White viterous china flat back wash basin size 450x300 mm with single 15mm CP brass pillar tap.

Providing and fixing white vireous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing white Vitreous china flat back or wall corner type lipped front urinal basion of 430x260x350 mm and 340x410x265mm sizes respectively.

Providing and fixign 15 mm nominal bore C.P.brass bib cock of approved quality conforming to IS: 8931

Providing and fixing 15 mm nominal bore C.P.stop cock (concealed ) of standard design and of approved make conforming to IS: 8931.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS:8931

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: 40 mm dia flexible pipe.

Providing and fixing uplasticized PVC connection pipe with brass unions . 45cm length ( 15 mm nominal bore)

Providing and fixiing PTMT towel ring trapezoidal shape 215mm long ,200 mm wide with a distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing of 100 mm dia stainless steel grating of approved quality by Engineer-in-charge.

Engagement of Ist class of Carpenter for Minor repairing of shutters.

Engagement of Mason for raising of height of old gate and other allied works .

Engagement of Electrician for Minor reapirs.

Engagement of Plumber for Minor reapirs.

Wiring for lingh point/ fan point / exhaust fan point/ call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A.

Wiring for light / power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No.4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supply and fixing following modular switch/ socket on the existing modular plate & switch box inclduing connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

JHANGIR AHMED

Sat Paul

M/S MOHD ASHRAF SHAN

Amit Katyal

ABDUL KABIR