Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹91.9 LAccepted-AOC AMRUITPUR AMRUITPUR INS CHILKA INS CHILKA KHURDA KHORDHA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L1 | Accepted-AOC being the lowest | |
| 2 | L2₹1.1 Cr+₹12.5 L (13.4%)Rejected-Finance AT BALANTAR POST PATHARA VIA KHALLIKOTE DIST GANJAM ORISSA 761029 | GANJAM | ODISHA | 761029 | L2 | Rejected-Finance not lowest | |
| 3 | L3₹1.1 Cr+₹12.8 L (13.7%)Rejected-Finance | L3 | Rejected-Finance not lowest | |
| 4 | L4₹1.1 Cr+₹13.0 L (13.9%)Rejected-Finance AT BRAJARAJPUR PO INS CHILKA DISTT KHURDHA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L4 | Rejected-Finance not lowest | |
| 5 | L5₹1.1 Cr+₹16.2 L (17.4%)Rejected-Finance PASCHIM BHAGABANPORE DARUA CONTAI PURBA MEDINIPUR 721401 | PURBA MEDINIPUR | PURBA MEDINIPUR | WEST BENGAL | 721401 | L5 | Rejected-Finance not lowest |
Tender Value
₹1.2 Cr
EMD Value
₹1.9 L
Closing Date
23 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE NO2 VISAKHAPATNAM
HQ CE NAVY COMPLEX RAILWAY STATION ROAD VISAKHAPATNAM 530004
ADDITION/ALTERNATION OF TWELVE DUs (TYPE-II) QTRs, EIGHT DUs (TYPE-III) QTRs AND PRINCIPAL ACCN AT KV INS CHILKA
2023_MES_581393_1
82606
Open Tender
Civil Works
Item Rate
270 days
GARRISON ENGINEER CHILKA
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GARRISON ENGINEER CHILKA
₹1.9 L
Yes
31 Mar 2023
16 Feb 2023
25 Mar 2023
16 Feb 2023
23 Mar 2023
9 Mar 2023
16 Feb 2023 - 9 Mar 2023
Amount
Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) and including making good complete all as specified and directed.
All as per Sl. item No1 above but exc. 1.5 Sqm and not exc. 4 Sqm each.
Taking down chowkats or frames exc.1.5 Sqm and not exc. 4 Sqm each complete all as specified and directed
Taking down shutters of any description exc. 1 Sqm but not exc. 2 Sqm each complete all as specified and directed
S&F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed
Taking down, easing, adjusting and refixing in the same opening shutters of any description exc. 1 Sqm but not exc. 2 Sqm each and refixing builders hardware as required and including renewal of unserviceable screws etc. complete all as specified and directed
S&F 2nd class hard wood, 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 2nd class hard wood, 35 mm thick glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc, divided into squares with plain chamfered mitered and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, section 8, clause 8.20 (a); supplied & fitted to chowkats complete all as specified and directed.
S&F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed
S&F MS 300 mm, ordinary rat tail rod pattern springs and including roller and roller plate complete all as specified and directed
S&F bands, straps, supports or stays for rainwater, hold fasts; and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
S&F second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like and including all necessary labour; articles not exc. 200 Cucm each complete all as specified and directed
S&F butt hinges medium weight cold rolled mild steel of 75 mm fixing only complete all as specified and directed.
S&F 18/19 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws in timber frame as in cup boards etc, complete all as specified and directed.
S&F 30 mm continuous (piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (when open) complete all as specified and directed.
S&F 75 mm long brass handles cast type, polished bright complete all as specified and directed.
S & F 100 mm hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed
S&F solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side prelam PVC sheet ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails feathered at edges with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as speciifed and directed.
S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 150 mm aluminium anodiser barrel tower bolts of extruded sections complete all as specified and directed.
All as per Sl. item No. 22 above but 125 mm.
S&F 150 mm aluminium handles, cast type, anodised complete all as specified and directed
All as per Sl. item No. 24 above but 125 mm.
S&F 140 mm length floor door stopper of aluminium alloy body and tougue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
M&L preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of pink pirmer complete all as specified and directed.
M&L preparation of old painted wooden surfaces of any description and including applying one coat of synthetic enamel paint complete all as specified and directed.
M&L roof treatment in order of precedence as given below complete all as specified and as directed:- (i) Taking out of existing water proofing treatment and including padding, cleaning the surface using wire brush, brooming down and washing down with water to remove dust etc, and brushing with neat cement slurry @ 3.00 kg of cement per Sqm. (ii) 15 mm thick screed bed in CM 1:4 on surface mixed with WPC as per manufacturers instructions. (iii) Cleaning of plastered surface and applying one coat of oil based bituminous primer conforming to IS -3384 (latest) @ 0.30 Ltr / Sqm.
(iv) Supply and laying 3 mm (Minimum) thick APP based polymeric membrane of approved manufacturer with weight not less than 3.80 Kg per Sqm, reinforced with non-woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (v) Applying one coat of bituminous aluminium primer @ 0.1. Lit / Sqm. Note :- (a) Primer, APP membrane & bituminous aluminium paint shall be of same manufacturer and executed through applicator authorised by the approved manufacturer only. (b) Membrane shall be laid with side overlap of 100 mm and end overlap of 150 mm as per manufacturers instruction. (c) WPC will be measured and paid seperately.
Supply only water proofing compound complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L 15 mm thick plaster in CM 1:3 on roof slabs etc, using WPC finished even & smooth using extra cement complete all as specified and directed. NOTE: WPC will be measured and paid separately.
Preparation of sunken portion slab surfaces by applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm and including cleaning surfaces complete all as specified and directed
M&L APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms / sqm) land on primed surface by forced application complete all as specified and directed.
M&L applying evenly a tack coat of industrial bitumen 85 / 25 at the rate of 1.2 kg per sqm and including cleaning surfaces over water proofing membrene complete all as specified and directed.
M&L PCC 1:5:10 type E2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed
M&L 40 mm thick PCC type B1 1:2:4 (20 mm grade aggregate) as in sunken floor, finishing cement concrete surface even and fair without using extra cement and including using WPC as per manufacturers instructions complete all as specified and directed. NOTE: WPC will be measured and paid separately.
Demolition of brick work / stone masonry built in cement mortar and removal of rubbish from site complete all as specified and directed
M&L brick work with fly ash bricks, straight or curved on plain exc. 6 m mean radius built in CM 1:6, complete all as specified and directed.
M&L brickwork with fly ash bricks using old size bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed
Taking up or down 20 mm bore steel tubing and connections and including cleaning for refixing or removal to store complete all as specified and directed.
All as per Sl. Item No. 41 above but 15 mm bore.
S&F 20 mm bore galvanized medium grade tubing fixed / laid in trenches to walls and ceilings or laid in floors complete all as specified and directed.
All as per Sl. Item No. 43 above but 15 mm bore.
All as per Sl. Item No. 43 above but fixing only of 20 mm bore. NOTE: Serviceable quantity obtained from Sl. Item No. 41 shall be reused under this item.
All as per Sl. Item No. 44 above but fixing only of 15 mm bore. NOTE: Serviceable quantity obtained from Sl. Item No. 42 shall be reused under this item.
Cutting chases, pinning in, making good to facings in brick walls where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed.
M&L cutting holes in brick walls exc. half brick wall and not exc.one brick wall, built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified and directed.
M&L roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed
M&L vitrified ceramic tiles 9 / 10 mm thick light shade (square / rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors and skirting / dado etc,. set and jointed in cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L non - skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed
M&L glazed coloured ceramic tiles in vertical surface 350 x 250 x 6 to 7 mm / 450 x 350 x 6 to 7 mm thick set and jointed in neat cement slurry and pointed in colour cement to match and including 10 mm thick rendering in CM 1:4 complete all as specified and directed
Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness (below or above ground level) complete all as specified and directed
M&L 40 mm thick PCC type B-1, 1:2:4 using (20 mm graded stone aggregate) as in flooring complete all as specified and directed.
M&L 75 mm thick PCC type C2 1:3:6 (40 mm graded stone aggregate) as in plinth protection complete all as specified and directed
Taking down cement plaster and the like from brick or stone wall and concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed
M&L 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4 in two layers and including using WPC and finishing even and fair without using extra cement complete all as specified and directed. NOTE: WPC will be measured and paid separately.
M&L 10 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 and including finishing even and smooth without using extra cement complete all as specified and directed.
M&L 5 mm thick rendering on ceiling surfaces in CM 1:3 and including finishing even & smooth without using extra cement complete all as specified and directed.
M&L preparation of new plaster wall surfaces and including applying two coats of distemper oil emulsion and including treating with 3 mm thick wall care putty and a coat of primer white or tinted complete all as specified and directed.
M&L preparation of new plastered wall surfaces and including applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) over a coat of primer as per manufacturers instructions complete all as specified and directed.
M&L preparation of new plastered ceiling surfaces and including applying three coats of white wash complete all as specified and directed.
All as per Sl. Item No. 62 above but on walls.
S&F aluminium anodised frame for doors, windows, ventilators, fixed partitions etc, with one or more rebate with powder coating of minimum 50 micron thick and including joining cleat for fixing etc, complete all as specified and directed.
S&F aluminium anodised powder coated of any colour (thickness of powder coating not less than 15 micron) for window / ventilator shutters of sliding type without sash bars, aluminium sections weighting 0.55 kg/m and including necessary jointing cleats, glazing clips, rubber paking, anodised aluminium snap beading screws, rollers, holding and also with locking arrengements complete all as specified and directed.
S&F aluminium anodised window and ventilator shutters of minimum 50 micron thick, fixed type without sash bar, aluminium section weighing 0.55 Kg/ Rm and including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc, complete all as specified and directed.
S&F aluminium anodised powder coating of any colour (thickness of powder coating not less than 15 micron) window / ventilator shutters pin head type of glass, side hung type without sash bars, aluminium sections weighting 0.55 kg / Rm and including all necessary jointing cleats, glazing clips, rubber paking, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long (1 No.) in shelton shutter, stainless steel butt hinges type B-21 75 mm long (02 Nos), friction hinges 300 mm (01 pair) in glazed shutter, suitable handle 1 No and 100 mm powder coated aluminium tower bolt (02 Nos) with aluminium flat and screws complete all as specified and directed. Note for Sl. item nos. 64 to 67: Glass or stainless steel wire cloth shall be measured and paid separately.
S&F aluminium powder coated deco grill with apperture of size 60 x 45 mm securing with suitable aluminium channel to frame complete all as specified and directed.
S&F 4.8 mm thick sheet glass, exc. 0.5 Sqm each pane in ordinary quality in aluminium window and including necessary fixing arrangement complete all as specified and directed.
All as per Sl. Item No. 69 above but frosted glass, on one side.
S&F in repairs CP fancy type health faucet with hose & hook for EWC and including all necessary fitting complete all as specified and directed. MAKE: Prayag cat No 452 or equivalent
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern & pipe) and including connection to trap and flushing pipe complete all as specified and directed.
S&F in repairs PVC (EWC) seat cover white colour with flat bottom and including CP hinges complete all as specified and directed.
S&F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle and including brackets complete all as specified and directed.
S&F in repairs PVC connections 15 mm size with PTMT nuts and washers for 600 mm long pipe complete all as specified and directed.
S&F in repairs 100 mm dia PTMT grating doom (min. weight 25 gms) complete all as specified and directed.
S&F in repairs stop cock fancy type chromium concealed type of 15 mm dia cast copper alloy chorimum plated screwed down high presure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs brass chromium plated shower rose of size 125 mm size with swivel joint fixing to GI pipe of 15 mm bore complete all as specified and directed.
S&F in repairs bib taps, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
S&F in repairs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 litres capacity and including provision of inlet, outlet overflow and wash out connections complete all as specified and directed.
Disconnecting existing tanks of capacity exc. 500 & n. exc. 1000 litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. NOTE: Cleaning, repairs, etc, will be measured and paid separately.
S&F ball valves 20 mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe & fixed complete all as specified and directed. (min. weight 20 mm - 210 gms)
S&F PVC floor trap 75 mm plane wih grating and including jointing with solvent cement complete all as specified and directed
S & F in repairs cast iron floor trap,100 mm dia with grating and including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed
S&F 20 mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes and including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F plate rack of size 24 x 30 x 10 inch complete all as specifed and directed. MAKE: Prayag cat No P-330 or equivalent
S&F in repairs wash hand basin vitreous china white flat back of size 580 X 450 mm with brackets complete all as specified and directed.
S&F in repairs CP pillar tap of 15 mm dia cast copper alloy fancy type screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs 50 mm dia low density polyethylene pipes (LDPE) pressure rating 6 kgf / cm2 as in waste pipe to wash hand basin / Kitchen sink / urinal complete all as specified and directed.
S&F in repairs 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed
All as per Sl. Item No. 92 above but 75 mm bore.
S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
All as per Sl. Item No. 94 above but 75 mm bore.
S&F 110 mm bore PVC (SWR) bends with access door complete all as specified and directed.
All as per Sl. Item No. 96 above but 75 mm bore.
S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F cement concrete tiles 250 x 250 x 22 mm thick machine pressed, jointed and pointed in neat cement slurry in floors and roof cut and polished with grey cement and no pigments and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed
M&L granite (of any type) work (table rubbed and polished) in steps, jams, pillars, window-cills, cooking plateform and like in cement mortor 1:4 and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, grinding and polishing and similar work, 15 mm thick screed bed in CM 1:4 and including demolition of existing slabs complete all as specified and directed.
M&L machine cut kota stone slab of 20 to 25 mm thick in flooring and including 20 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L machine cut kota stone slab of 20 to 25 mm thick in skirting etc, and including 10 mm thick rendering in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar work complete all as specified and directed.
S&F 25 mm dia stainless steel curtain rod in repairs complete all as specified and directed.
S&F decorative brackets for curtain rails complete all as specified and directed.
M&L preparing old decorated plastered wall surfaces and including brooming down or steel wire brushing, scraping down moulds, mass and efflorescent salts and greasy spots and applying two coats of white wash complete all as specified and directed.
All as per Sl item No. 107 above but on ceilings.
M&L complete removal of existing treatment and including applying two coats of oil bound distemper over a coat of primer and 3 mm thick wall care putty complete all as specified and directed.
M&L complete removal of existing treatment on walls, chajjas & cantilever portion and making good the undulated surfaces by filling of putty and including rubbing, scraping & grinding make the wall surface smooth, applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) over a coat of primer complete all as specified and directed.
M&L 100 mm thick PCC, type C2, 1:3:6 using 40 mm graded stone aggregate as in path and including demolition complete all as specified and directed.
M&L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.
S&F in repairs CP tubular towel rail, 20 mm dia 600 mm long, brass chromium plated and fixed complete all as specified and directed
S&F framed work such as grills, gratings etc, with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.
S&F Welded steel wire fabric complete to steel members n. exc. 4 kg / sqm complete all as specified and directed.
M&L preparation of new steel surfaces of any description over 10 cm in width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F 100 mm butt hinges medium weight, cold rolled mild steel complete all as specified and directed.
S&F 100 mm hasp & staple, safety type, mild steel with mild steel hinge pin and including bolt to hinge plate with screws complete all as specified and directed.
M&L PCC type B-2 (1:2:4) in foundations, filling and mass concrete complete all as specified and directed.
M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams sides and soffits (if any) of foundations, sides of columns and plinth beams and cantilever chajjas and simillar works vertical or to batter as specified for fair finished complete all as specified and directed.
Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete along with fittings such as switches, sockets, ceiling rose, lamp holder, tube light fittings and making good distrubed surfaces on walls etc, complete all as specified and directed.
M&L point wiring with 1.5 sqmm PVC insulated unsheathed multistranded copper cable of FRLS grade with one run of 1.5 sqmm PVC insulated copper cable as earth continuity drawn in and including concealed PVC conduit not less than 20 mm dia with pressed steel in concealed MS box duly and including covered with 3 mm thick hylam sheet for mounting switches / Sockets, accessories such as spacers, saddles, junction boxes for one light / fan point / bell point / 5 amp socket controlled by one switch complete all as specified and directed.
All as per Sl. item No 122 above but on the same board.
All as per Sl. item No. 122 above but one light point controlled by two 2-way switches
All as per Sl. item No. 122 above but with 2.5 sqmm cable with one run of 2.5 sqmm cable as earth continuity on independent board.
M&L concealed sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.
All as per item No. 126 above but with 2 runs of 6 sqmm main wire along with 1 run of 6 sqmm earth wire.
S&F switch paino, flush type, single pole, one way, 5/6 Amp complete all as specified and directed.
All as per item No. 128 above but two way switches.
S&F switch socket out let 3 pin 5 Amps flush type, 230 V complete all as specified and directed.
S&F piano type switch socket combination 2 in 1, 3 pin, 5/15 Amps, 230 V complete all as specified and directed.
S&F ceiling rose surface backlite 3 terminals 65 x 50 mm 230 V and including PVC Box of size 3"X3" round type complete all as specified and directed.
S&F five stepped electronic socket type fan regulator complete all as specified and directed.
S&F bell push, 5 Amp, 230 Volt, complete all as specified and directed.
S&F bell electric ding dong type, AC 230 volts complete all as specified and directed.
Supply and replacement of 10 watt LED bulk head fitting environmenatal friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge- lit LED luminaries comprising of high brightness LEDs complete all as specified and directed. Make : (i) BIBWP10WLED (Product code 112334) (ii) Philips Cat No. WT202WLED6SCWPSUSIPC (iii) Havells Cat No. HEXAFT10WLED857SSYMBOPC
S&F 18 W tubelight fitting with lamp, endura linear LED wall mounted LED batten with polycarbonate housing & intergated driver for efficient heat dissipatio with fitting complete all as specified and directed.
All as per Sl. Item No. 137 above but 9 W.
Supply and replacement of LED street light 25 w, made up of pressure die cast aluminium housing with high power LED as lighting source and lens embeded PC cover having top opening separate driver compartment with IP 66 protection and impact resistance of IK07 complete all as specified and directed.
S&F exhaust fans, 300 mm sweep 1400 RPM, heavy duty, AC single phase, 230 volts and including louver connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e. anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and directed.
S&F non metallic ventilating fans, 250 mm sweep 900 RPM, AC single phase, 230 volts and including louver connection with multistranded copper conductor flexible wire of suitable size from ceiling rose, necessary fixing arrangement i.e. anchor nut, bolt, washer and grouting and making good to disturbed surface complete all as specified and directed.
S&F ceiling fan white / Ivory in colour of 1200 mm sweep BLDC 5 star complete all as specified and directed.
M&L painting of ceiling fans and blade with spray paint using synthetic enamel paint after cleaning all dust etc, complete all as specified and directed.
Taking down defective ceiling fan from original position and refixing the same after repairs complete all as specified and directed.
Supply and replacement of ceiling fan capacitor / condensers 2.5 mfd complete all as specified and directed.
Supply and replacement of ball bearing 6201 / 6202 / 6203 as required complete all as specified and directed.
Supply and replacement of fan clamp with nut & bolt and rubber bush suitable for ceiling fan of any sweep complete all as specified and directed.
M&L rewinding of ceiling fan motor of type 1200 mm sweep, with super enameled copper wire of appropriate gauge and including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. complete all as specified and directed.
Taking down carefully old unserviceable MCB DBs with MCBs of any type by unscrewing from wall, ceiling and making good surfaces to match with existing surface complete all as specified and directed.
Supply and replacement of factory made sheet metal enclosure with protected type 2 pin and earth plug and socket and including one MCB SP 240 volt, 20 Amps complete all as specified and directed.
S&F MCB DB 08 way SPN with 200 A rated bus bar, 240 Volts, double door complete all as specified and directed.
All as per Sl. Item No. 151 above but 04 way
S&F MCB DB 4 way TPN with 200 A rated bus bar, 415 Volts, double door complete all as specified and directed.
S&F MCB SP 6 to 32 Amps 240 Volts complete all as specified and directed
S&F MCB SPN 40 Amps AC, 230 Volt 50 HZ complete all as specified and directed.
Supply and replacement of LED retrofit lamp B22 holder base with polycarbonate body and aluminium heat sink of 09 / 10 W complete all as specified and directed.
Supply and replacement of angle holder for LED bulb of any type complete all as specified and directed.
S&F MCB TPN 63 Amps 415 volt 50 Hz complete all as specified and directed.
M&L cutting openings, through brick / stone walls built in cement mortar for fixing exhaust fans of 300 / 250 mm sweep and including making good in cement mortar 1:4 to match with existing surface complete all as specified and directed.
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
ABHIMANYU MAHARANA
M/S JAGANNATH SASMAL
ANTARYAMI PANDA AND COMPANY
RANA ENTERPRISES
HARI PALAI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .