COMPREHNSIVE REPAIRS TO JOINERY FLOORING PLASTERING SANITARY FITTINGS AND CERTAIN LEAKAGE SEEPAGE SUNKEN PORTION DAMAGED CHHAJJA ROOF TREATMENT DAY TO DAY MAINT OF CERTAIN BUILDINGS AND WELCOME MAINT TO OFFICER MD ACCN AT CPE ITARSI UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking down chowkats or frames with shutters (without taking off shutters from frame) n exc 1.50 sqm each including making good of disturbed area complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) exc 1.50 sqm & nxc 4.00 sqm each including making good of disturbed complete all as specified and directed.

Taking down and refixing same opening shutter exc.1 sqm and not exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm and removing from site complete all as specified and directed.

S&F of pressed steel frame for doors with one or more rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

S&F of pressed steel frame for doors with one or more rebates size of frame 105x60 mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in back filling of pressed steel frame etc complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast and similar work etc complete all as specified and directed.

S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, in the frame at site as per specification and drawing complete all as specified and directed.

S&F of 35 mm thick 2 second class hard wood glazed and skeleton shutter for door open rebated prepare to receive glass gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitered bead’s for securing glass gauge etc size of marker of shutters as per SSR Part-I Section-8 clause 8.2 (a), complete all as specified and directed.

S&F of 30 mm thick door flush shutters solid core construction with block board core and plywood face panels complete all as specified and directed.

S&F of 30 mm thick glazed and skelton shutters 2nd class hard for windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b) prepared to receive in SSR part-I class 8 (R) glass gage dividing in squares size of member as per specification complete all as specified and directed.

S&F of aluminium powder coated aluminium window having three track with aluminium section 92 mm X 31.75 mm (weight of bottom section 1.070 kg/m, top section 0.933 kg/m, shutter section 40 mm X 18 mm (weight of handle section 0.417 kg/m) interlock 0.547 kg/rmt mounted on bearing to slide on tracks plain anodized in approved shade including 5mm thick plain glass and wire mesh, PVC track gasket, EPDM rubber gasket on glass of weather tightening along with locks, handle including sealing gap with marble surfaces with silicon sealants making it water proof in all manner etc. complete all as specified and directed. Note:- Minimum thickness of powder coating 50 micron.

S&F of aluminium powder coated ventilator having fixed glass with aluminium section having section 50.80 mm x 25.40 mm (weight 0.489 kg/m) glazing clear section (weight 0.109 kg/m) with plain anodized including 5mm thick frosted glass making frame and glass water tightening and making it good etc complete all as specified and directed. Note:- Minimum thickness of powder coating 50 micron.

M&L for resecuring or easing and adjusting without taking down shutters of any description not exc 1.00 sqm each complete all as specified and directed.

M&L for resecuring or easing and adjusting without taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each complete all as specified and directed.

S&F in repairs 100 mm size, butt hinges, medium weight, cold rolled, mild steel, and fixed complete all as specified and directed.

S&F in repairs butt hinges, 75mm size, medium weight, cold rolled mild steel complete all as specified and directed.

S&F of stainless steel butt hinges,100 mm long and fixed with steel screws complete all as specified and directed.

S&F of 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repairs for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F of 300mm long mild steel, sliding door bolt plate type stove enameled black with bright bolt not less then 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repairs for 300mm long mild steel, sliding door bolt plate type stove enameled black with bright bolt not less then 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F of mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed.

S&F in repairs for mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long complete all as specified and directed.

S&F of 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs for 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs for 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs for 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs 75mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of mild steel barrel tower bolts, stove enameled black, with bright bolt size 200mm complete all as specified and directed.

S&F in repairs for mild steel barrel tower bolts, stove enameled black, with bright bolt size 200mm complete all as specified and directed.

S&F of mild steel barrel tower bolts, stove enameled black, with bright bolt size 150mm complete all as specified and directed.

S&F in repairs for mild steel barrel tower bolts, stove enameled black, with bright bolt size 150mm complete all as specified and directed.

S&F in repairs mild steel barrel tower bolts, stove enameled black, with bright bolt size 100mm complete all as specified and directed.

S&F of 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and directed.

S&F in repairs for 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and directed.

S&F of 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and directed.

S&F in repairs for 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and directed.

S&F of mild steel pressed handles oval type stove enameled black size 150mm complete all as specified and directed.

S&F in repairs for mild steel pressed handles oval type stove enameled black size 150mm complete all as specified and directed.

S&F in repairs for mild steel pressed handles oval type stove enameled black size 100mm complete all as specified and directed.

S&F of 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repairs for 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F of door closer hydraulically regulated, aluminium body, designation No.2, universal type, suitable for door shutters of weight between 36 to 60 kg complete all as specified and directed.

S&F in repairs for door closer hydraulically regulated, aluminium body, designation No.2, universal type, suitable for door shutters of weight between 36 to 60 kg complete all as specified and directed.

S&F of floor door stoppers 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floors complete all as specified and directed.

S&F in repairs for floor door stopper 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floors complete all as specified and directed.

M&L for hacking out old broken glass panes of any thickness description from wooden frame or stone concrete or steel frame or brick surrounds, glazed with putty or fixed with beads and prepared to receive new glass panes complete all as specified and directed.

S&F of 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F of 3mm sheet frosted glass ordinary quality and glazing with oil putting in squares n.exc 0.50 sqm each complete all as specified and directed.

S&F of galvanized mild steel wire cloth of 0.56 mm nominal dia of wire and averaging of width of aperture 1.18mm, fixed with mild steel wire staples complete all as specified and directed.

S&F in repairs for galvanized mild steel wire cloth of 0.56 mm nominal dia of wire and averaging of width of aperture 1.18mm, fixed with mild steel wire staples complete all as specified and directed.

S&F in repairs 1.5mm thick plain colour PVC sheet/acrylic plain sheeting fixed with screw and washer in windows/ventilators etc. including hacking out/ removing old from metal/ wooden frame complete all as specified and directed.

S&F in repairs 20-25 mm dia chromium plated steel drapary curtain rod with bracketes including necessary drilling holes and fixing with rawl plug and suitable screw in wall including designer dom for curtain rod complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of primer to new wooden surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails

S&F of 18/19mm thick prelaminated particle board interior grade, prelaminated on one side with decorative choice lamination fixed with screws to timber frame work including teak wood beading complete all as specified and directed.

S&F of 100mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinges plate and fixed with screws complete all as specified and directed.

S&F in repairs for 100mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinges plate and fixed with screws complete all as specified and directed.

Dismantling of steel rolling shutter of any size, steel work including door, gate etc. complete all as specified and directed.

S&F in repairs 1.25mm thick of laths of steel rolling shutter, without ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull or manual type complete all as specified and directed.

All as per item No 65.00 here-in-before but for gear operated type with bevel gear box and crank handle.

Taking down the existing rolling shutters from the existing opening and refixing the same in position after carrying out necessary repairs including oiling, greasing, easing out etc. complete all as specified and directed.

Dismantling of existing ceiling board of any description fixed in any position with nails and S&F in position suspended false celling system using e-grid suspended celling grid system of M/S Everest Industries Ltd or India Gypsum complete all as specified and directed. Note:- 1. The size of grid shall be 600X600mm with GI frame work, main runner 39X24mm, cross tee 29X24mm and wall angle 22.2X22.2mm using 4mm thick high pressure stream cured non primered classic/designer variant E-Board ISI marked IS No.14862-2000. 2. Fibre cement E Board to be placed in the gird of E Grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the pulins of the roof with butter fly clips.

Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided complete all as specified and directed.

S&F of rolled mild steel Fe-410-w (grade E-250), quality A, framed work such as grills, gratings, angle for ventilators etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work complete all as specified and directed.

M&L for pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars, removal of debris etc. complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as speciified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick wall built in cement mortar 1:4 complete all as specified and directed.

Demolition of reinforced concrete as in columns, slab, floors (other than ground floors), beams, stair cases, landing and similar suspended work (reinforcement cut as required to facilitate demolition) with necessary scaffolding and protection as required complete all as specified and directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brickwork or concrete surfaces, finished the surface even and fair without using extra cement complete all as specified and directed.

M&L for 5 mm rendering in cement mortar 1:3 to ceiling and similar work finished the surface even and fair without using extra cement complete all as specified and directed.

Supply only intregal water proofing compound complete all as specified and directed.

M&L for two coats of cement base paint on newly plastered surfaces of wall including preparation of surfaces over one coat of primer complete all as specified and directed.

M&L for two coats of white wash on newly plastered surfaces as on ceiling including preparation of surfaces complete all as specified and directed.

M&L for two coat of oil bound distemper on newly plastered surfaces of wall including preparation of surfaces over one coat of primer complete all as specified and directed.

M&L for one coats of white wash as on ceiling including preparation of old surfaces complete all as specified and directed.

M&L for one coat of oil bound distemper over one coat putty on wall including preparation of old surfaces complete all as specified and directed.

M&L for one coats of synthetic enamel paint to old wooden surface including preparation of surfaces exceeding 10cm width or girth complete all as specified and directed.

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for ceramic (non-skid) tiles area of each tile exc 0.11 sqm but n exc 0.18 sqmx7 mm thick, as in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles bedded over and including 15mm thick of screed in cement mortar 1:6 complete all as specified and directed.

M&L for non-skid ceramic tiles 7-8mm thick area of each tiles exc 0.18 sqm but n exc 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles bedded over and including 15mm thick of screed in cement mortar 1:6 complete all as specified and directed.

M&L for any coloured glazed, ceramic tiles size of tiles 450x300x7mm thick on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in colour cement to match including 10mm thick cement plaster with cement mortar 1:4 complete all as specified and directed.

M&L for any coloured vetrified tiles size 600 x 600mm x 10 mm thick as in floors set and jointed in neat cement slurry over and including 15 mm thick screed bed in cement mortar 1:6 and pointed in coloured cement to match the colour of tiles complete all as specified and directed.

M&L for any colour vetrified tiles size 600 x 600mm x 10 mm thick as on vertical surfaces, such as skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in sub base of floor finish even and rough to receive further floor finishes (tile/kota stone/ marble), complete all as specified and directed.

M&L for 75 mm thick cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) as in sub base complete all as spcified and directed.

Taking down/removing existing roof teatment including backing coat and cleaning of roof slab surfaces including sweeping clean and washing down with water to remove dust and M&L for providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed. Note:- (a) Applying 5 mm thick plaster in cement mortar (1:3) using water proofing compound to roof and similar work finished the surface even and smooth without using extra cement. (b) Applying evenly a tack coat of industrial bitumen 85/25 @1.20 Kg/sqm. (c) Supplying and laying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including coping on the surfaces with torch application of membrane with 10cm over laps as required. (d) Applying two coats of aluminium paint @ 0.2 kg/sqm. (e) (iv) Ponding test shall be done for 24 hrs.

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n exc 1000 ltr complete all as specified and directed.

S&F of rotational moulded PVC water storage tank, 500 ltr capacity (cylindrical vertical type three layered with closed top) including inlet, outlet and brass valve, high pressure with polythene float valve of 20 mm dia, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, washout holes of approved make hoisted and fixed complete all as specified and directed.

S&F of rotational moulded PVC water storage tank, 1000 ltr capacity (cylindrical vertical type three layered with closed top) including inlet, outlet and brass valve, high pressure with polythene float valve of 20 mm dia, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, washout holes of approved make hoisted and fixed complete all as specified and directed.

S&F in repairs HDPE / plastic water storage tank cover complete all as specified and directed.

Disconnecting of existing tanks, setting aside (or lowering if required) for repair, cleaning, etc. and hoisting if required reconnecting and refixing in position of capacity exc. 250 ltr nexc. 500 ltr complete as specified and directed.

S&F in repairs 100 mm dia PTMT/CP grating with waste hole complete all as specified and directed.

S&F in repairs grating doom 125 mm dia with waste hole of PTMT (minimum weight 40gms) complete all as specified and directed.

S&F in repairs 20mm ball valves high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screw for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F of 15mm PVC connection of length 450mm with PTMT nuts complete all as specified and directed.

S&F in repairs chromium plated brass, shower roses 125mm size, fixed to steel pipe as union complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm bore complete all as specified and directed.

All as per item No. 109.00 here-in-before but for 20mm bore of pipe

S&F of GI tubing, medium grade, 15mm bore laid in trenches and as wall including cuttings chases in walls and making good, cutting portion complete all as specified and directed.

All as per item No. 111.00 here-in-before but for fixing only 15mm bore old/reused pipe.

S&F of GI tubing, medium grade, 20mm bore laid in trenches and as wall including cuttings chases in walls and making good complete all as specified and directed.

All as per item No. 113.00 here-in-before but for fixing only 20mm bore old / reused pipe.

S&F in repairs 60 cm long sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repairs brass cromium plated, fancy type, bib taps 15 mm bore long nose screwed down for iron pipe or for brass complete all as specified and directed.

S&F in repairs, pillar taps cast copper alloy with capstan head, chromium plated, fancy type, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed (dia of bore 15mm).

S&F in repairs concealed stop cock 15mm dia bore, chromium plated, cast copper alloy with long shank and cup (concealed type) including making good any description and finishing etc. complete all as specified and directed.

S&F in repairs, chromium plated jet spray (health faucet) (ABS body) with 8mm dia 1.2 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and directed.

S&F in repairs 15 mm dia angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed.

S&F in repairs vitreous china squatting pan orissa pattern size 580 x440mm white with integral foot rest, including trap set and conection to trap, flushing pipe etc. including making good to floor complete all as specified and directed.

S&F in repairs vitreous china EWC 'P' or 'S' trap, white including plastic water closet seat, white closed pattern with flat bottom, and cover with mild steel chromium plated or aluminised hinging device suitable for EWC and making good to floor fixing bolt complete all as specified and directed.

S&F in repairs 10 litre capacity, PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 600mm complete all as specified and directed.

S&F in repairs vitreous china, wash hand basin white, flat back of size 630x450 mm with pedestal, 32mm PVC pipe, excluding tap including brackets fixing to wall and two Nos 10mm dia 100mm long nut and bolt over brackets and CP waste coupling complete and all as specified and directed.

S&F in repairs vitreous china, urinal, half stall type including all fittings with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repairs towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 90gms) complete all as specified and directed.

S&F in repairs PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and directed.

S&F in repairs PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints laid in trenches and floor with and including PVC clip complete all as specified and directed.

S&F in repairs PVC(SWR) branch piece, single T, equal or unequal 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bend 110 mm dia without access door complete all as specified and directed.

S&F in repairs PVC (SWR) bend 110 mm dia with access door complete all as specified and directed.

S&F in repairs PVC (SWR) junction single 110 mm bore, (single T), equal or unequal with access door complete all as specified and directed.

S&F in repairs PVC (SWR) 110mm bore, vent cowl complete all as specified and directed.

S&F in repairs PVC (SWR) branch pieces 110mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75 mm dia, single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F in repairs PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints laid in trenches and floor with and including PVC clip complete all as specified and directed.

S&F in repairs PVC(SWR) branch piece, single T, equal or unequal 75 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) junction single 75 mm bore, (single T) equal or unequal with access door complete all as specified and directed.

S&F in repairs PVC (SWR) bend, 75 mm dia with access door complete all as specified and directed.

S&F in repairs PVC (SWR) bend, 75 mm dia without access door complete all as specified and directed.

S&F of 75 mm outlet PVC (SWR), floor trap with chromium plated grating including jointing of waste pipe and fixied in cement concrete B1 (1:2:4 ) using 20 mm graded stone aggregate complete all as spcefied and directed.

S&F in repairs PVC (SWR), gully trap 125/110mm, setting and jointing with solvent cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete complete all as specified and directed.

M&L for water proofing treatment to RCC sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top complete all as specified and directed:- (a) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces. (b) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application. Note: (i) Laying of APP based membranes shall be done by torch method or as per manufacturer's instructions. (ii) A minimum overlap shall not be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturer's instructions. (iii) All CI/PVC traps in sunken slabs to be enclosed with PCC 1:1.5:3(min 15 cm) all round. (iv) Ponding test shall be done for 24 hrs.

Demolition and breaking up or down PVC /AC/CI /Cement rain water pipe fixed in any position and any type complete all as specified and directed.

S&F in repairs 15mm dia PTMT bib taps screwed down for iron pipe fixed in reps complete all as specified and directed.

S&F in repairs pillar taps fancy type 15mm of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-110gms)

S&F in repairs stop valve 15mm of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15mm-110gms)

All as per item No. 149.00 here-in-before but for 20mm dia.

M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete all as specified and directed. Note: (i) Any damage to float valve, pipe etc shall be make good by the contractor. (ii) Date of cleaning to be marked on water tank after cleaning.

All as per item No. 151.00 here-in before but for capacity of tanks exc. 500 ltr and nexc. 1000 ltr

S&F in repairs 15 mm, nipple suitable for HDPE water tanks including necessary driling holes etc fixed complete all as specified and directed.

All as per item No. 153.00 here-in-before but for 20mm dia.

S&F in repairs kitchen sink, made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling/waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F of tubular, towel rail brass, chromium plated, 20mm dia D type 60cm long between flanges complete all as specified and directed.

S&F of stainless steel plate rack of standard pattern of size 900 x 750 x 250 mm, thickness of stainless steel sheet shall be 1.00 mm and grade of sheet shall be grad 304 including fixing to wall with 4 Nos 50mm screws and PVC rawal plugs complete all as specified and directed.

S&F in repairs 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F of shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed.

S&F in repairs 32mm waste coupling of PTMT (half or full threaded) complete all as specified and directed.

S&F in repairs 40mm waste coupling of PTMT (half or full threaded) complete all as specified and directed. (Minimum weight 40mm-60 gms)

S&F in repairs 32mm waste coupling but suitable for urinals complete all as specified and directed. (Minimum weight 32mm-45gms)

S&F in repairs 15mm bore dia, brass, CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs low density polyet?hylene pipes (LDPE), 32mm of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc complete all as specified and directed.

S&F in repairs low density polyethylene pipes (LDPE), 40mm of pressure rating 6 kgf/cm2 fixed to walls, ceilings or in floors etc. complete all as specified and directed.

S&F in repairs unions, 15mm brass to connect iron to polyethylene and fixed complete all as specified and directed.

S&F in repairs unions, 20mm brass to connect iron to polyethylene and fixed complete all as specified and directed.

S&F in repairs elbows, 15mm brass both ends screwed and fixed complete all as specified and directed.

S&F in repairs elbows, 20mm brass both ends screwed and fixed complete all as specified and directed.

M&L in repairs of 32mm dia, waste fittings, brass, chromium plated for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

All as per item No. 171.00 here-in-before but for 40mm dia.

S&F in repairs flushing cistern and flushing pipe (exclusive of brackets) complete all as specified and directed.

S&F in repairs wash basins, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of waste pipe complete all as specified and directed.

S&F in repairs 15mm bore pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight15mm-110gms)

M&L for cement concrete type C2, 1:3:6 (Using 40 mm graded stone aggregate) bed to drain pipes dia 100mm including packing under, and haunching against the sides of pipes after they are laid and tested; in

M&L for tiling to match existing with making good wall or floor complete all as speicified and directed. Note:- Tiles supplied by M.D. or paid at ‘supplied only’ rates.

All as per item No. 177.00 here-in-before but for painting or distempered with matching of existing surface.

Deduct Schedule of credit (calculation will be done off line) Rs. 100270.00

Dashmesh Enterprises

M/s SHIVRATAN CONSTRUCTION

TANUJ CONST. CO.

PK CONSULTANT

pyarelal galar