MADURAI DISTRICT STRENGTHENING AND BLACK TOPPING OF 3 NOS. OF ROADS IN MELUR BLOCK AT MADURAI DISTRICT UNDER TNRRIS 2020-21 ADNL PACKAGE NO 06

Amount

Clearing the scrub jungle with uprooting and including all cuttings depositing of the products, removing from the site disposal by burying etc., complete including all incidental charges as directed by the departmental officers (SSR 301, 302, MOST 201)

Earth work excavating and deposting on bank with borrow bits in hard stiff clay,stiff black cotton,hard red earth,shales,murrum,gravel stoney earth and earth mixed with small size boulders SS 20 A including laying and spreading in layer of 250mm loose thick each, sectioning,watering and compacting etc, complete as per MOST 301-305

Providing and Laying Gravel to 100mm compacted thick including cost & conveyance of gravel from approved sources to work site including labour for spreading, watering and compacting by Power roller to achieve the required Proctor density at 100% compaction watering and compacting by Power roller to achieve the required proctor density at 100% compaction at optimum moisture content and hire & fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricading and providing danger lights etc., completeSide berms

Providing 75mm consolidated thickness WBM for top layers using 1 cum of grade III metal 2.50% of 63mm, 20% of 53mm, 72.50% of 45mm metal, 2.50% of 22.40mm and 2.50% of 11.20mm IRC size hard broken metal and 0.24 cum of gravel whose PI values is less than "6" for blind age and filler for 10 sqm, area including cost and conveyance of all materials from approved quarries to worksite and stacking of materials to department standard metric gauage for premeasurements including labour for laying, spreading new mwtal hand packing to camber gravel binding, watering with all leads for good water even if the season is worst drought forming edge bunds and consolidation by 8-10 tonne power roller and finishing to the total thickness with lines grades and cross sections as specified as per the departmental specifications including hire charges for all tools and plants and including fuel cost and other running charges for power roller and other tools and plants employed and all other incidental charges etc., complete

Applying tack coat over WBM surface using 4kgs of bitumen emulsion per 10 sqm including cost of bitumen emulsion which will be supplied departmentally at section store and cost of which will be recovered at the words as per special conditions appended inc

Providing and layiing pre-mix carpet 20mm thickness using 0.18cum of 13.2 IRC machine crushed metal 0.09cum of 11.2mm IRC machine crushed metal with 14.60Kg of Bitumen for pre-mixing 10 sqm of pre-mix carpet and laying separately Seal coat type "A" using .09 cum of 6.70mm IRC HBG chips with 9.80 Kg of Bitumen for 10sqm including cost and conveyance of materials to the departmental metric gauge for pre-measurement heating the bitumen boiler heating the aggregate and mixing them with bitumen in mini hot mix plant for pre-mix carpet and rolling by 80-100 KN power roller including labour charges for spreading hire and fuel charges for mini hot mix plant, bitumen boiler, all other tools and plants employed etc., complete

Suppy and fixing of HECTOMETRE STONE (three faces two lines dressed) of size 0.90 x 0.10 x 0.10m from approved sources including cost and conveyance to work site and fixing in position as directed by the Departmental Officers including labour finishing and all other incidental charges etc., complete

Suppy and fixing of KILOMETER STONE (three faces two lines dressed) of size 0.90 x 0.10 x 0.10m from approved sources including cost and conveyance to work site and fixing in position as directed by the Departmental Officers including labour finishing and all other incidental charges etc., complete

Provision for Name board from approved sources including cost and conveyance to work site and fixing in position as directed by the Departmental Officers including labour finishing and all other incidental charges etc., complete

Provision for Sign board from approved sources including cost and conveyance to work site and fixing in position as directed by the Departmental Officers including labour finishing and all other incidental charges etc., complete

Clearing the scrub jungle with uprooting and including all cuttings depositing of the products, removing from the site disposal by burying etc., complete including all incidental charges as directed by the departmental officers (SSR 301, 302, MOST 201)

Earth work excavating and deposting on bank with borrow bits in hard stiff clay,stiff black cotton,hard red earth,shales,murrum,gravel stoney earth and earth mixed with small size boulders SS 20 A including laying and spreading in layer of 250mm loose thick each, sectioning,watering and compacting etc, complete as per MOST 301-305

Picking existing BT surface

Providing and Laying Gravel to 100mm compacted thick including cost & conveyance of gravel from approved sources to work site including labour for spreading, watering and compacting by Power roller to achieve the required Proctor density at 100% compaction watering and compacting by Power roller to achieve the required proctor density at 100% compaction at optimum moisture content and hire & fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricading and providing danger lights etc., completeSide berms

Providing and laying Water Bound Macadam Grading - II ( 75mm to 22.40mm)IRC HBGmetal consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively)and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method)

Providing 75mm consolidated thickness WBM for top layers using 1 cum of grade III metal 2.50% of 63mm, 20% of 53mm, 72.50% of 45mm metal, 2.50% of 22.40mm and 2.50% of 11.20mm IRC size hard broken metal and 0.24 cum of gravel whose PI values is less than "6" for blind age and filler for 10 sqm, area including cost and conveyance of all materials from approved quarries to worksite and stacking of materials to department standard metric gauage for premeasurements including labour for laying, spreading new mwtal hand packing to camber gravel binding, watering with all leads for good water even if the season is worst drought forming edge bunds and consolidation by 8-10 tonne power roller and finishing to the total thickness with lines grades and cross sections as specified as per the departmental specifications including hire charges for all tools and plants and including fuel cost and other running charges for power roller and other tools and plants employed and all other incidental charges etc., complete

Applying tack coat over WBM surface using 4kgs of bitumen emulsion per 10 sqm including cost of bitumen emulsion which will be supplied departmentally at section store and cost of which will be recovered at the words as per special conditions appended inc

Providing and layiing pre-mix carpet 20mm thickness using 0.18cum of 13.2 IRC machine crushed metal 0.09cum of 11.2mm IRC machine crushed metal with 14.60Kg of Bitumen for pre-mixing 10 sqm of pre-mix carpet and laying separately Seal coat type "A" using .09 cum of 6.70mm IRC HBG chips with 9.80 Kg of Bitumen for 10sqm including cost and conveyance of materials to the departmental metric gauge for pre-measurement heating the bitumen boiler heating the aggregate and mixing them with bitumen in mini hot mix plant for pre-mix carpet and rolling by 80-100 KN power roller including labour charges for spreading hire and fuel charges for mini hot mix plant, bitumen boiler, all other tools and plants employed etc., complete

Suppy and fixing of HECTOMETRE STONE (three faces two lines dressed) of size 0.90 x 0.10 x 0.10m from approved sources including cost and conveyance to work site and fixing in position as directed by the Departmental Officers including labour finishing and all other incidental charges etc., complete

Suppy and fixing of KILOMETER STONE (three faces two lines dressed) of size 0.90 x 0.10 x 0.10m from approved sources including cost and conveyance to work site and fixing in position as directed by the Departmental Officers including labour finishing and all other incidental charges etc., complete

Provision for Name board from approved sources including cost and conveyance to work site and fixing in position as directed by the Departmental Officers including labour finishing and all other incidental charges etc., complete

Provision for Sign board from approved sources including cost and conveyance to work site and fixing in position as directed by the Departmental Officers including labour finishing and all other incidental charges etc., complete

Clearing the scrub jungle with uprooting and including all cuttings depositing of the products, removing from the site disposal by burying etc., complete including all incidental charges as directed by the departmental officers (SSR 301, 302, MOST 201)

Earth work excavating and deposting on bank with borrow bits in hard stiff clay,stiff black cotton,hard red earth,shales,murrum,gravel stoney earth and earth mixed with small size boulders SS 20 A including laying and spreading in layer of 250mm loose thick each, sectioning,watering and compacting etc, complete as per MOST 301-305

Picking existing BT surface

Providing and Laying Gravel to 100mm compacted thick including cost & conveyance of gravel from approved sources to work site including labour for spreading, watering and compacting by Power roller to achieve the required Proctor density at 100% compaction watering and compacting by Power roller to achieve the required proctor density at 100% compaction at optimum moisture content and hire & fuel charges for power roller, water sprinkler and all other incidental charges such as traffic barricading and providing danger lights etc., completeSide berms

Providing and laying Water Bound Macadam Grading - II ( 75mm to 22.40mm)IRC HBGmetal consisting of clean, crushed aggregates mechanincally interlocked by rolling and bonding together with screening binding material of 0.24 cum for 10 sqm (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 20 & 6% repectively)and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method)

Providing 75mm consolidated thickness WBM for top layers using 1 cum of grade III metal 2.50% of 63mm, 20% of 53mm, 72.50% of 45mm metal, 2.50% of 22.40mm and 2.50% of 11.20mm IRC size hard broken metal and 0.24 cum of gravel whose PI values is less than "6" for blind age and filler for 10 sqm, area including cost and conveyance of all materials from approved quarries to worksite and stacking of materials to department standard metric gauage for premeasurements including labour for laying, spreading new mwtal hand packing to camber gravel binding, watering with all leads for good water even if the season is worst drought forming edge bunds and consolidation by 8-10 tonne power roller and finishing to the total thickness with lines grades and cross sections as specified as per the departmental specifications including hire charges for all tools and plants and including fuel cost and other running charges for power roller and other tools and plants employed and all other incidental charges etc., complete

Applying tack coat over WBM surface using 4kgs of bitumen emulsion per 10 sqm including cost of bitumen emulsion which will be supplied departmentally at section store and cost of which will be recovered at the words as per special conditions appended inc

Providing and layiing pre-mix carpet 20mm thickness using 0.18cum of 13.2 IRC machine crushed metal 0.09cum of 11.2mm IRC machine crushed metal with 14.60Kg of Bitumen for pre-mixing 10 sqm of pre-mix carpet and laying separately Seal coat type "A" using .09 cum of 6.70mm IRC HBG chips with 9.80 Kg of Bitumen for 10sqm including cost and conveyance of materials to the departmental metric gauge for pre-measurement heating the bitumen boiler heating the aggregate and mixing them with bitumen in mini hot mix plant for pre-mix carpet and rolling by 80-100 KN power roller including labour charges for spreading hire and fuel charges for mini hot mix plant, bitumen boiler, all other tools and plants employed etc., complete

Suppy and fixing of HECTOMETRE STONE (three faces two lines dressed) of size 0.90 x 0.10 x 0.10m from approved sources including cost and conveyance to work site and fixing in position as directed by the Departmental Officers including labour finishing and all other incidental charges etc., complete

Provision for Name board from approved sources including cost and conveyance to work site and fixing in position as directed by the Departmental Officers including labour finishing and all other incidental charges etc., complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

K PANDI AND CO