PROVN OF VARIOUS SANCTIONED WORK AT 25ED AF STN DEVLALI

Amount

Excavation in trenches n . exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. or for shaft, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out any type of soil deep and getting out in any type of soil.

Surface excavation n. exc 30cm deep and getting out in hard dense soil.

Returning filling including spreading, leveling, watering and well ramming in layers n exc. 25 cm complete all as specified and as directed.

Removing excavated material n. exc 50 Mtr and depositing, where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 using 40mm stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:4 complete all as specified and as directed.

S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete.

S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete.

M&L renderig 15mm thick in cement mortar 1:6 over fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement

M&L renderig 15mm thick in cement mortar 1:4 over fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces of walls.

M & L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of 1mm thick putty complete all as specified and as directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:4,etc complete.

M&L for glazed coloured ceramic tiles 300 x 600 x 10 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete.

S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches/WALL.

S&F PVC (SWR) bends 110mm bore of any radious.

S&F PVC (SWR) junction single ,(single T) equal or unequal 110mm bore.

S&F PVC(SWR) vent cowl 110mm.

S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches.

S&F 75mm bore CI floor trap.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as directed and specified by Engineer-in-Charge.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete.

M&L 125mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete.

S&F aluminum handles cast type anodized 150 mm size etc complete.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection /path finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete type B-1 ,1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

S & F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S & F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.

S & F 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F 20 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete.

S&F vitreous china squatting pan 'ORISSA PATTERN ' size 580mm x 440mm 'white with integral foot rest (excluding flushing cistern and flush pipe ) with 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed

S & F in repair vitreous china wash down water closet (Pedestal) including white PVC seat cover closed pattern with flat bottem and cover and mild steel chromium plated hinge device,connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint to socket or stoper etc, white (EWC).

S & F Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand and waste pipe.

S&F 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed

S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete.

S&F 15 mm bore angle stop cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete.

S&F 15 mm bore bib taps long body chromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm bore etc complete.

S & F pillar taps, Cast Copper alloy, with capstan heads, chromium plated, fency type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe.

S&F towel rail 450mm long of PTMT fixed with an dincluding cromium plated brass screws and wooden/plastic cleats (minimum weight 170 gms) complete no specified.

S&F Soap dish any type , fixed to plugs with chromium plated brass screwes.

S&F painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (Including crimp profile) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Roof trusses (framed),tubuler trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (tubes, Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165

S&F for mild steel plates , plain , of any thickness square cur or notched including forming holes as required at site and including welding if required and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal at one end and screwed the other and grouting in PCC block including nut and washers etc complete and as directed.

Supplying, laying, jointing and testing reinforced concrete pipe class NP-2 with one collar per length of pipe of dia 150mm complete all as specified and as directed.

M & L cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for 150mm internal dia of pipe.

M & L PCC 1:3:6 type C-1 using 20 mm graded store aggregate as in coping/surface channel /drains complete all as specified and as directed.

M&L precast re-inforced Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes etc set in cement mortar 1:6 including necessary form work complete all as specified and directed

M&L Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms)

M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete.

S&F Steel windows or ventilators, fixed type, with glazing bars complete.

S&F Anodised aluminium snap grid frame work size 605x605 mm for false ceiling incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long all as specified & directed by Engr -in-charge

M & L Non asbestos fibre cement building boards 4 mm thick (one side embosed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed.

S&F Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F 32mm dia UPVC Low density polyethylene (LDPE) waste pipes of pressure rating 6 kgf/sq. cm

Supply and fix hand shower (health faucet) (ABS Chrome palted) with 8mm dia, 1m long, flexible tube with wall hook complete all as specified and as directed by Engineer-in-Charge .

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

M&L 20mm thick makrana marble tiles machine cut in urinal partion Fixed in wall jointed with grey cement slurry including cutting and polishing complete as directed.

M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L Anti Termite treatment of pre construction the top surface of filled earth at the rate of 5 litres of emulsion per sqm of surface

M&L Anti Termite treatment of pre construction the soil under plinth protection at the rate of 5 litres of emulsion per sqm of surface

M&L Anti Termite treatment of pre construction the soil along with external perimeter of building at rate of 2.25 litre of emulsion per meter of the perimeter wall.

Point wiring with PVC insulated and unsheathed multistranded FRLS copper conductor single core 1.5 sqmm (nominal area) cable using approved colour code as per IS drawing in and incl incl heavy duty PVC concealed conduit wiring cutting chaser on stone masonry/ brick wall, for not less than 25 mm which shall be increased as per site requirement with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes of suitable size complete alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLS) copper conductor cable of size 1.5 mm as continuous earth wire connected to common earth dolly complete all specified and marking good disturbed surfaces of wall, floor or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete and as directed Engr-in-Charge. (a) One light point/Fan point controlled by one switch.

(b) One 3 pin socket outlet 5Amps on the same board with other swithches.

(c) One 3 pin 5 Amp socket out let controlled by one switch on independent board.

Supply and fixing socket outlet modular type, 2 module, 2/3 pin combined, 6 Amps/230 volts complete with steel /PVC box , cover plate for fixing of socket complete all as specified and directed by Engr-in-Charge.

S & F and connecting up LED 20 watt fitting 6500K 4 feet with 120 lumen/watt,aluminum housing extruded in thermal conductive material with powder coated in white colour Extruded serration High Optically efficient plastic FR grade material in milky white,Spring Steel Nickel plated,Inj. Moulded engineering plastic Brown in colour Five year written warranty from manufacturer including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton cat No CCS-100-20-65-HL2-DP-NWH or equivalent in Philips/Havells/Wipro ).

S & F and connecting up LED 10 watt fitting 6500K 2 feet with 100 lumen/watt,aluminum housing extruded in thermal conductive material with powder coated in white colour Extruded serration High Optically efficient plastic FR grade material in milky white,Spring Steel Nickel plated,Inj. Moulded engineering plastic Brown in colour Five year written warranty from manufacturer including 23/00.0076 size 3 core copper flexible wire from connector to ceiling rose/adoptor including all necessary fixing arrangements complete. Crompton cat No CCS-103-10-65-SL-DP-NWH or equivalent in Philips/Havells/Wipro ).

Supply and fixing switch modular type, 1 module, 6 / 10 Amps, 230 volts one way with steel /PVC box , cover plate for fixing switches complete all as specified and directed.

S&F MCB SP 6 to 32 Amps 240 volt. B series 10 KA breaking capacity all as specified. Make Indoasian/L&T/HPL

S&F MCB SPN 32 Amp, 230 volt, 50Hz AC Made from moulded self-extinguishing thermostst plastic and suitable for 'C' curve, 10 KA breaking capacity all as specified directed by Engr-in-Charge. Make Indoasian/L&T/HPL

S & F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 4 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge . Make Indoasian/L&T/HPL

Supply & fixing exhaust fan metal body 300 mm sweep suitable to work on 230 Volts 50 Hz AC supply including breaking/ cutting existing stone masonry or brick wall complete with plaster match as per with existing wall making round/square shape hole as require site on cutting existing window with steel frame, for fixing of exhaust fan with louver complete all as specified and directed by Engr-in-Charge Make Havells/ CG/Bajaj including connecting to ceiling rose all as required or directed.

S&F Ceiling rose surface backelite 65mm x 50mm ISI marked with 3 terminal including connecting and testting complete. Make HPL/Standard/Polycab

Supply and fix laying in LT XLPE insulated PVC heavy duty armoured cable 1100 volts grade multi stranded aluminium conductor electric cable cross sectional area 10 Sqmm 4 Core including necessary connection with provision of lugs & cable gland fixing arrangements for single piece PVC box complete all as specified and directed.

M&L for double wall corrugated (DWC) duct (dure guard) as per IS 14930 part II LT UG cable protection including coupler, elbows, T joiints, Bends etc. and test report Make: Dura line/ Gemini/ Rex of size dia 63 mm outer dia al as per direted by Engr in charge.

M&L for Point wiring complete with two single core, PVC insulated unsheathed, multi stranded bright annealed copper conductor cable 2x4 sqmm FRLSH (unsheathed) for industrial socket outlet controlled by one switch on independent board with and including 4 sqmm green color copper conductor cable FRLSH as PVC casing capping/concled conduit on stone mashnory wall or brick wall as site requirement not less than 25 mm width and accessories surface mounted on walls, celling etc & including PVC box and plate for mounting switches, sockets, regulators etc complete all as specified and directed.Make Polycab/Havells/legrand

M&L for Point wiring with PVC insulated and unsheathed multistranded FRLSH copper conductor single core 2.5 sqmm (nominal area) cable using approved colour code as per IS drawing in and incl incl heavy duty PVC conduit/casing capping wiring on stone masonry wall, floor, wooden plywood or ceiling, for not less than 25 mm which shall be increased as per site requirement with all accessories suitable for modular type fitment including provision for fixing of modular flush boxes of as required or suitable size complete alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 2.5 mm as continuous earth wire connected to common earth dolly complete all specified and marking good disturbed surfaces of wall, floor, wooden plywood or ceiling with plaster and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete and as directed Engr-in-Charge. Make polycab/Havells/legrand

S&F16 Amp Sheet Steel Enclosure DBOXx SRCD plug & play all-in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as protection from overload and short circuit faults and fitting on wall with cutting as require size and shape for fitting of Socket outlet 16 Amp with MCB, switch, Sheet Steel Enclosure complete all as specified and directed by Engr-in-Charge, Havells cat No.DHDMCSN0251016 or Anchor, cromptan, wipro, legrand or equivalent.

M & L for submain wiring fixing on wall floor with two single core PVC insulated flexible copper conductor cable size 2x4 sqmm FRLSH and one single core PVC insulated flexible copper conductor cable green colour of size 4 sqmm FRLSH as earth lead in and including PVC conduit/casing capping fixing with screw/saddle and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in -Charge.MAke polycab/Havells/legrand

S & F sheet metal inclosure MCB SPN 4 way distribution board 240 volt, double door with DIN rail bus bar, neutral link, earth terminal etc IP-43 protecation. Make L&T or equivalent all as specified and directed by Engr-in- charge.Make L&T /Havells/Legrand

S & F sheet metal inclosure MCB SPN 8 way distribution board 240 volt, double door with DIN rail bus bar, neutral link, earth terminal etc IP-43 protecation. Make L&T or equivalent all as specified and directed by Engr-in- charge..Make L&T /Havells/Legrand

S&F MCB SP 6 to 32 Amps 240 volt. B series 10 KA breaking capacity all as specified. .Make L&T /Havells/Legrand

S&F MCB SPN 32 Amp, 230 volt, 50Hz AC Made from moulded self-extinguishing thermostst plastic and suitable for 'C' curve, 10 KA breaking capacity all as specified directed by Engr-in-Charge. .Make L&T /Havells/Legrand

M & L for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 2x 6 sqmm ZHLS and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm ZHLS as earth lead in and including PVC conduit/casing and capping and making good the disturbed wall surfaces to match with existing specification for ACs/ UPS all as required at site or directed by Engr-in- charge. Make of Wire : Polycab/Havells/legrand

S&F sheet metal encloser for industrial socket of single pole and earth enclosure with two pin and earth plug with socket complete with one single ploe MCB of 20 Amp all as per directed by Engineer in charge..Make L&T /Havells/Legrand

Supply and install hi wall split units indoor/outdoor Inverter type of capacity 1.5 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity as shown all as specified and directed by Engr-in-charge. Make Havlles LLOYD, Hitachi Gogerej

Supply and fix digital Timer switch panel on Hanger stone masnory wall with necessary drilling with hold fast and built in outdoor compatible Sheet metal enclosure for hanger security light 40 A to accommodate 3 pole 4 wire system with contactor appropriate size , Make- Indo asian Havells/ L&T,complete all as specified & as directed by Eng-In-Charge.

M&L for shifting of existing hanger flood light which is fitted at 15 meter height (over the shed ) from GL, fixing it below the shed over entrance door using suitable GI bracktet, hook clapms, nut bolts and washer with drilling on stone masonary wall with fixing with rowel plug and require cables of 1.5sqmm 3 core flexible copper cable around 3 to 5 Mtr for light connection, check servicebilty of fitting and repair replacement of driver or 80 watt LED fitting, make completely serviceable complete all as specified and directed by Engr-in-Charge. Note :- T&P & safety equipment will be provided by contractor whiteout any extra cost .

S&F MCB TPN 40 Amp, 230 volt, 50Hz AC Made from moulded self-extinguishing thermostst plastic and suitable for 'C' curve, 10 KA breaking capacity all as specified directed by Engr-in-Charge. Make C&S/Indoasian/L&T/HPL

M & L for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 2x 2.5 sqmm FRLS and one single core PVC insulated flexible copper conductor cable green colour of size 1.5 Sqmm FRLS as earth lead in and including PVC conduit/casing and capping on stone masnory wall hangers of any hight with necessary drilling sadling on stone wall and making good the disturbed wall surfaces to match with existing specification for security light/timer panel all as required at site or directed by Engr-in- charge. Make of Wire : legrand/Havells/Polycab

M & L for submain wiring with two single core PVC insulated flexible copper conductor cable of sze 2x 4 sqmm FRLS and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm FRLS as earth lead in and including PVC conduit/casing and capping on stone masnory wall hangers of any hight with necessary drilling sadling on stone wall and making good the disturbed wall surfaces to match with existing specification for security light/timer panel all as required at site or directed by Engr-in- charge. Make of Wire : legrand/Havells/Polycab

Excavation over area n.exc 1.5 Mtr deep and getting out in soft/loose soil.

Earth work excavation in post holes ( or similar holes) in soft/loose soil ,each not exceeding 0.50 Cum ,getting out ,returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm ,watering and removing surplus soilto a distance n exc50 m and making good surface

Removing excavated materials (soils) exceeding 250Mtr but not exceeding 500Mtr and depositing where directed.

Rolling and consolidating formation surfaces in cutting using power roller of capacity exc 8 tonne and n.exc 12 tonnes to achieve field compaction of at least 98% of modified proctor density of existing soil as directed.

M & L Hard core of guage not exc 63 mm of broken granite stone deposited spreaded and levelled in layers not exc 15 cm thick watered and rammed to a true surface.

M & L for 75 mm thick sub base in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) all as specified.

M&L plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete as sub base of floor complete all as specified and as directed.

M & L for Cement concrete 1: 2:4 type B-1 (20 mm graded stone aggregate) as in edges for Coping.

Supply and fix laying in LT XLPE insulated PVC heavy duty armoured cable 1100 volts grade multi stranded aluminium conductor electric cable cross sectional area 10 Sqmm 4 Core including necessary connection with provision of lugs & cable gland fixing arrangements for single piece PVC box complete all as specified and directed.

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out soft/loose type soil complete all as specified and directed.

Returning Filling in including spreading, leveling, watering & well ramming in layers n. exc 25 Cm complete all as directed..

Removing excavated/Surplus soil n exc 50 Mtr & depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as directed..

S & F single piece moulded PVC box of size 230X185X110mm outer dimensions (Sintex or equivalent of National ) consisting of one porcelain kit kat 16 Amps & one 4 way connector including all necessary fixing arrangements to fix to pole i.e. clamps, nuts, bolts & washers of suitable size after dismantling the existing pole coping and replacement of cable lugs and cable gland all as directed.

Supply & fix decorative Turin LED Bollard 10 watts 230 volts, 50 HZ in IP 66, vertical in sothing opal/ prismatic finish made up of polycarbonate, suitable for 10 watt LED, all accessories prewired Havells to Cat pt TURINBLS10WLED857PSYMTOPC or equivalent of make: Bajaj/Philips complete all as specified and directed.

S & F decorative guarden Gate post top RUBY LED POST TOP New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun landscape luminaire with high power LEDs Clear Cover bright illumination for different applicationscomplete all as specified and directed by Engr-In-Charge make Havells Cat No RUBYPT25WLED757SSYMTOPC or equilent Crompton /Philips /Wipro

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4 mm dia through GI pipe 15 mm dia light grade by means of bolts,nuts, check nuts and washers of galvanised iron or steel,with adequate quantity of charcoal and salt, proper watering arrangements including 20 mm dia medium grade GI tubing.PCC chamber,Chamber Cover all as shown in electrical plate No 3 of SSR part I 2009 connected to earthing test point all as specified or indicated and testing on completion. The end point connection of eatrhing will be carried out with the help of GI bolt grouted and washer and nut.

M&L for pre cast cement concrete ( 1:4:8) type D2 using 40mm graded stone aggregate for foundation filling of poles as mass concrete.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 80 mm dia suitable for 0.4 mpa working pressure.

Supply and fix digital Time digital switch on pole wall with necessary clamping with hold fast and built in outdoor compatible Sheet metal enclosure for guarden light 40 A to accommodate 3 pole 4 wire system with contactor appropriate size , Make- Indo asian Havells/ L&T,complete all as specified & as directed by Eng-In-Charge.

Surface excavation in soft/loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil.

M&L renderig 15mm thick in cement mortar 1:6 over other than fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement

M & L for preparation of new plastered surface and applying two coat of cement base paint over a coat of alkali resistant priming paint on external surface etc complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

S&F MS plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes ,without any attachment, Fe-410W (Gde-E-250) quality -B

M&L 50mm thick sand cushing for placing Interlocking Paver block etc complete.

M & L for machine pressed coloured rubber moulded precast concrete interlocking paver block with pigment any shape and size confirming to IS-15658-2006 of 80 mm thickness, M-35 grade all as specified and directed by Engineer-in-Charge.

Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

S&F MS plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes ,without any attachment, Fe-410W (Gde-E-250) quality -B

M&L for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sq.mm 1100 Volts, FRLS grade drawn through and including heavy duty PVC casing and capping/PVC conduit not less than 25 mm width and accessories surface mounted on walls, ceilings etc. on & including PVC board with earth dolly arrangement with surface plate for mounting switches, sockets, regulators etc and one run of 1.5 Sq.mm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade as earth wire and connected to common earth dully complete for the following :- (a) One light/fan point controlled by one switch.

Supply and fixing switch modular type, 1 module, 6 / 10 Amps, 230 volts one way complete all as specified and directed.

Supply & fixing decorative ultra slim square profile linear LED lighting fixture extrudedpolycarbonate, environmental friendly, energy efficient ready to use pack Triyca Batten 10 W 6500 K, complete all as specified and as directed by Engineer-in-Charge. Make: Havelles phiilips/Bajaj/Wipro.

Supply & fixing decorative ultra slim square profile linear lighting fixture extrudedpolycarbonate, environmental friendly, energy efficient ready to use pack Triyca Batten 20 W 6500 K, complete all as specified and as directed by Engineer-in-Charge. Make: Havells or equivalent in Philips/Bajaj/Wipro.

S&F Ceiling rose surface backelite 65mm x 50mm ISI marked with 3 terminal including connecting and testting complete. Make HPL/Standard/Polycab

M & L Cement concrete 1:2:4 (Using 20 mm graded stone agg) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Materials & labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer complete.

S&F Mild steel, plain, black sheet 1.6mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for point wiring complete with two single core, PVC insulated, unsheathed, multi stranded bright annealed copper conductor cable, 1.5 Sq.mm 1100 Volts, FRLS grade drawn through and including heavy duty PVC casing and capping not less than 25 mm width and accessories surface mounted on walls, ceilings etc. on & including PVC board with earth dolly arrangement with surface plate for mounting switches, sockets, regulators etc and one run of 1.5 Sq.mm PVC insulated, unsheathed, multistranded, copper conductor cable FR grade as earth wire and connected to common earth dully complete for the following :- (a) One 3 pin 5 Amp socket out let controlled by one switch on independent board.

M & L for submain wiring with two single core PVC insulated flexible copper conductor cable size 2.5 sqmm FRLS and one single core PVC insulated flexible copper conductor cable green colour of size 1.5 sqmm FRLS as earth lead in and including PVC conduit/casing capping cutting chaser on stone masonry wall , hard standing and making good the disturbed wall floor surfaces to match with existing specification all as required at site or directed by Engr-in -Charge.

S & F wall Mounting fan sweep 300 mm pull cord oscillating type single piece AS blade 3 speed pull cord control complete as directed by Engr-in-charge Make : Havells/Usha/Bajaj with complete arangement of fixing on wall all as specified as directed.

M&L for fixing of LED acrylic letters Name of (AIR FORCE STATION DEOLALI) in as per direction colour at OMQ area main gate, letter will be fitting on gate of height 6 to 7 Mtr with proper making safety structure for fitting of acrylic letters without any damage existing gate sheet complete all as specified and directed by Engr-in-Charge Note (i) Contractor shall arrange necessary T & P, Transpotation safety equipments like halemet, safety belt etc while working on height, rate shall be deemed to be included in quoted rate (ii) Any casualty or injury to workers during the working hours shall be sole liability of the contractor. No claim on this account shall be entertained by the department

S & F PVC Insulated and weather proof three core multistrand copper conductor cable of size 2.5 sqmm through with 25 mm black condut pipe from MCB DB to Gate MCB DB complete all as directed by Engr-In-Charge. Make Havells, polycab, Gloster and plaza

S & F Sheet Metal enclosure double door for mounting MCBs with 200 A rated bus bar 2 way AC 240 Volt with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge . Make Legrand /L&T/HPL

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in Hard dence soil complete all as specified and directed.

S&F 04 seater FRP with back of cast iron with antique arm rest brown colour for outdoor park (wooden texture back support bench+black with arm rest) as per drg enclosed complete all specified and directed by Engr-in-charge.

M/S Nilesh Enterprises (BID ID -3400550)

Vinod Enterprises (BID ID -3400549)