Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹27,500
Closing Date
3 Nov 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GM, KTPS
Administrative Building, KTPS PO Mecheda Dist Purba Medinipur Pin 721137
Procurement of Excen Crusher Assembly and its spares and different spares for Bottom Ash Hopper for unit 5 OH under AHP MM
2026_WBPDC_1045853_1
WBPDCL/KTPS/NIT/E4090/26-27
Open Tender
Miscellaneous Goods
Buy
90 days
KTPS
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹27,500
Yes
15 Oct 2026
15 Oct 2026
6 Nov 2026
15 Oct 2026
3 Nov 2026
22 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | EXCEN CRUSHER,33X30,GLAND FOLLOWER FOR BOTTOM ASH HOPPER ( MOC:-BRASS/BRONZE ) | 2 | NO | - | - |
| 2 | JET PULSION PUMP, COMPLETE ASSY, 8 INCH FOR BOTTOM ASH SLURRY SYSTEM ( 01 NO OF COMPLETE ASSEMBLY CONSISTS OF:- 1)BODY (INLET)-1NO,MOC-DURITE/ALLOY CAST IRON IS:4771-1985 HCr 27/400 400BHN MIN 2)ALIGNING RING-01NO,MOC-STEEL GR-20 IS-1030 3)FLANGE CLAMP HALF (312OD x252ID)-02NOS ,MOC-STEEL GR-20 IS-1030 4)GASKET- 01NO,6mmTHK,MOCRUBBERRISED ASBESTOS 5)8 INCH COMBINING TUBE WITH 5 INCH THROAT (THROAT CUM OUTLET PIECE)-01NO,MOC-High Chrome Class-III,HARDNESS-550BHN MIN 6)NOZZLE TIP-01NO MOC-SS410 WITH CERAMIC LINER 7)NOZZLE INLET-01NO,MOC-CI FG 200 TO IS 210 8)GASKET-01NO,1.5mm THK,MOC-RUBBERRISED ASBESTOS THICKNESS OF CERAMIC LINER:-10(approx),HARDNESS-8-9 AS PER MOH'S SCALE THICKNESS OF NOZZLE TIP-6(approx) INLET WATER FLOW-200M3/HR(approx) at 175MWC (approx) ) | 2 | NO | - | - |
| 3 | HOPPER JETTING NOZZLE TIPS,CERAMIC LINER FOR BOTTOM ASH HOPPER SYSTEM,STG.-2FOR BOTTOM ASH HOPPER SYSTEM,STG.-2 ( D1:27mm,D2:24mm THICKNESS OF CERAMIC LAYER:3.5mm HARDNESS OF CERAMIC LAYER:8-9 ON MOH'S SCALE MOC: BODY:SS 410 ) | 10 | NO | - | - |
| 4 | BA HOPPER,INSPECTION WINDOW GLASS FOR BOTTOM ASH HOPPER ( HEAT RESISTANT TOUGHENED GLASS OD:225mm,THK:12mm ) | 10 | NO | - | - |
| 5 | FEED GATE,ROLLER FOR BOTTOM ASH HOPPER ( MOC:STEEL IS:1030,GR:20-40 OVERALL DIA WITH COLLAR:177.8mm/7INCH ) | 4 | NO | - | - |
| 6 | DRAIN PIT JET PUMP,EJECTOR TYPE # COMPLETE ASSEMBLY WITH WATER INLET ELBOW,PIPE WITH FLANGE,BOLTS AND NUTS AND FOUNDATION BOLTS & COMBINING TUBE,MATERIAL-DURITE 450 BHN,WATER# FOR BA HOPPER PIT,STG.-1 ( COMBINING TUBE:-DURITE/ALLOY CAST IRON IS:4771-1985 HCr 27/400,HARDNESS-450BHN 80NB ELBOW:-MS IS:1239 WATER MANIFOLD:-MS IS:226 BASE PLATE STRUCTURE:-MS IS:226,12mm THK COUNTER FLANGE:-OD#190,ID#92,THK-12mm,MS IS:226 WITH 06NOS HOLES FOR M12 BOLTS EQUISPACED ON 150BCD COUNTER FLANGE:-OD#200,ID#92,190,THK- 12mm,MS IS:226 WITH 06NOS HOLES FOR M12 BOLTS EQUISPACED ON 160BCD PIPE WITH FLANGE:MS (HEAVY GRADE)IS:1239 NOZZLE TIP:SS 416 NOZZLE INSERT:CERAMIC HARDNESS:-9 MOHS DISCHARGE PIPE SIZE:100NB WATER PR AT INLET:-200PSI FLOW:-50CMH CAPACITY:25CMH ) | 1 | NO | - | - |
| 7 | BA HOPPER,SHIELD NET,SIZE-350MMX1630MM FOR BOTTOM ASH HOPPER ( MOC:SS 316 WIRE DIA:4mm MESH SIZE:10x10mm ) | 60 | NO | - | - |
| 8 | SS BOLT M10X50 HEX HEAD,MAT:SS-316 FULL THREAD ( ALONGWITH SS 316 HEX NUT ) | 400 | NO | - | - |
| 9 | SQUARE WASHER, M10, 50X50MM, MAT-S.S 304 ( MOC:SS 316 SIZE:50x50 SQ,THK:2mm ) | 400 | NO | - | - |
| 10 | EXCEN CRUSHER,COMPLE ASSY WITH FEED SUMP FOR BOTTOM ASH HOPPER DRG NO.-8852-2B-582 REV-B
Additional Data:
EXCEN CRUSHER COMPLETE ASSY WITH FEED SUMP CHUTE FOR BOTTOM ASH HOPPER
TYPE:-Single Roll Reversible
Speed:-20RPM,Capacity:-90TPH
Max output Clinker Size:-25mm
Speed Reduction through Gear Box:-30:1
Speed Reduction through Chain &
Sprocket:-2.8:1
MOC
Cam Group Structure-Chrome Alloy
CI,Hardness:-550BHN
Packing Gland Flange-MS IS 2062,
Packing Gland Follower-Brass/Bronze
Packing-Graphited Asbestos
Packing Gland-CI FG 220 IS-210
Slinger/Spacer-MS IS-2062,
Lantern Ring-Bronze
Complete Roll including Shaft, Shaft-EN-24,
Wear Plate(Side)-12mm THK Durite or
Equivalent Material 350BHN
Wear Plate Back-15mmTHK Durite or
Equivalent Material 350BHN
Wear Plate Front-Durite or Equivalent
Material 350BHN
Bearing Support & Bearing Casing-CS IS
1030 GP-200-400W
Bearing:-23220CC/W33,(Make-SKF ) | 1 | NO | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.12 MB
BOQ_2563392.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .