Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-01₹9.5 LAccepted-AOC | L-01 | Accepted-AOC Being lowest | |
| 2 | L-02₹9.5 L+₹1,467.66 (0.15%)Rejected-Finance | L-02 | Rejected-Finance Not being lowest | |
| 3 | L-03₹9.6 L+₹8,407.84 (0.89%)Rejected-AOC | L-03 | Rejected-AOC Not being lowest | |
| 4 | L-04₹9.8 L+₹34,054.52 (3.59%)Rejected-Finance | L-04 | Rejected-Finance Not being lowest | |
| 5 | L-05₹9.9 L+₹38,149.22 (4.02%)Rejected-Finance OPPOSITE GHOOM DRC PO GHOOM DISTT DARJEELING WB PIN 734 102 | DARJEELING | WEST BENGAL | 734102 | L-05 | Rejected-Finance Not being lowest |
Tender Value
₹9.6 L
EMD Value
₹19,120
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Darjeeling
P.O. Jalapahar Dist- Darjeeling (WB) Pin- 734103
PROVN OF CERTAIN MINOR WORKS AT LEBONG UNDER AGE I DARJEELING
2022_MES_533638_1
8978/E8
Open Tender
Civil Works
Item Rate
182 days
AGE (I) Darjeeling
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
AGE (I) Darjeeling
₹19,120
Yes
19 Aug 2022
25 Jun 2022
29 Jul 2022
25 Jun 2022
27 Jul 2022
11 Jul 2022
25 Jun 2022 - 2 Jul 2022
60 days
Amount
M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and as directed.
M&L for Excavation in Trenches, not exc. 1.50 Metre wide and not exc 1.50 Metre in depth for any type of foundation/cable trench and getting out in Soft/Loose Soil, complete all as specified and as directed.
M&L for Excavating in Post Holes (or similar holes) in Soft/Loose Soil, each not exc. 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 Cm, watering, and removing surplus soil to a distance not exc 50.00 Metre and making good surface, complete all as specified and as directed.
M&L for Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.
M&L for Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.
M&L for Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, Foundation of Pole etc. including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed.
M&L for Sand filling under floors or in foundations including watering and consolidation in layers, complete all as specified and as directed.
M&L for Hardcore with broken stones/ boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.
M&L for Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.
S&F of Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified, complete all as specified and as directed.
M&L for Brick Work with Fly Ash Bricks, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in Cement Mortar 1:4, complete all as specified and as directed.
M&L for Rendering (Internally) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Fair, complete all as specified and as directed.
M&L for Rendering (Externally) 15mm thick in Cement Mortar 1:4 in two layers on Brick Walls/Concrete Surfaces, 5mm thick top layer mixed with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE: WPC shall be Measured and Paid as ‘Supply only’ under relevant Item.
Supply only Integral Water Proofing Compound (WPC), conforming to IS-2465:1975 and as approved, complete all as specified and directed.
M&L for Screed Bed or Bedding Layer 20mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed.
M&L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and as directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed. Note - Screed bed will be measured to paid seperately.
M&L for providing non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match complete all as specified as directed. Note - Screed bed will be measured to paid seperately.
M&L for Glazed Ceramic Tiles 450x350x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.
M&L for Glazed Ceramic Tiles 300x200x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.
M&L for Reinforced Cement Concrete, M-20 (Nominal Mix) 1:1.5:3 (20mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Item.
M&L for Pre-cast Reinforced Cement Concrete (nominal mix) 1:2:4 (20mm graded stone aggregate) in Slab Supported on wall, Cover Slabs for Manholes, Shelves and Similar Articles, etc., Set in Cement Mortar 1:4 including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed. NOTE : Reinforcement will be measured and paid separately under relevant Item.
M&L for TMT Bars 8-10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed.
M&L for preparing newly plastered surfaces of ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
S&F of sinks with drainage board made of stainless steel l.0mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. MAKE- PRAYAG/ SOMANY/ JAQUAR/ JINDAL
S&F of 15mm bore (dia) GI tubing 'medium grade' galvanised with all fittings fixed to wall, ceiling or laid in floors, complete all as specified and as directed. MAKE- JINDAL/ TATA/ BANSAL/ PRAKASH SURYA
S&F of Bib Tap 15mm bore (dia), Cast Copper Alloy with Crutch or Butter-fly Handle, Fancy type, chromium plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed. MAKE- HINDWARE/ PRAYAG/ JAQUAR/ SOMANY/ MARC/ CERA
Supply and fixing of Angular Stop Valve 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated, (Consealed Type), screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed. MAKE- HINDWARE/ PRAYAG/ JAQUAR/ SOMANY/ MARC/ CERA
S&F of fancy type brass chromium plated Health Faucet with 1.0 metre long braided hose, fixed to wall with necessary mounting arrangements, complete all as specified and as directed. MAKE- HINDWARE/ PRAYAG/ JAQUAR/ SOMANY/ MARC/ CERA
S&F of Flexible Waste Pipe 32 mm bore dia (bore) 90 Cm long for Wash Hand Basin, Sink, etc., complete all as specified and as directed. MAKE- PRAYAG/ POLYTUF
M&L for preparing new Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M&L for preparing newly plastered surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.
S&F GI Snap Grid of size 605x605mm framed work for false ceiling including 4.0mm dia GI Supporting Hanger, J-bolt with necessary Washers, Bolts and Nuts for securing Framed Work to Ceilling and to the Snap Grid as per Specification and Drawing of MES Schedule Part-II, complete all as specified and as directed.
S&F of 20mm bore (dia) GI tubing 'medium grade' galvanised with all fittings fixed to wall, ceiling or laid in floors, complete all as specified and as directed. MAKE- JINDAL/ TATA/ BANSAL/ PRAKASH SURYA
S&F 4mm thick non asbestos cement plain building boards, fixed to aluminium/ timber frame work with screws as in ceiling complete all as specified and as directed.
M&L for preparing newly Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of Alkali resistant Primer, complete all as specified and as directed.
M&L for Cement Concrete 1:4:8, type D-2 (40mm graded aggregate), 100mm thick as in sub-base of floor, path etc., laid in alternate bays, finishing Concrete Surfaces Even and Fair, complete all as specified and as directed.
M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) in Surface Channels and Drains, Manholes etc. including use and waste Formwork as ordered, complete all as specified and as directed.
M&L Extra forming Fair Finished to Drains or Channels 30Cm inner girth in Cement Concrete surfaces using Extra Cement including Forms Moulds Mitred/ Stopped Ends, etc., complete all as specified and as directed.
Add to or Deduct from Item No. 41 here-in-before for Every 25mm Girth or Part thereof Over or Under 30 Cm, complete all as specified and as directed. Note:- Quantity of this item shall be changed as per site requirement.
S&F of Pillar Tap 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed. MAKE- HINDWARE/ PRAYAG/ JAQUAR/ SOMANY/ MARC/ CERA
S&F of Solid PVC Door Frame of size 50x47mm made out of 5.0mm plain colour PVC Sheet reinforced with Mild Steel Square Tube, and fixing in Opening as per Specifications and Drawing, complete all as specified and as directed.
S&F of Factory Made Solid Panel PVC Door Shutter 30mm thick (style) consisting of frame made out of Mild Steel Tubes for Top & Bottom Rails having Mild Steel Frame shall be covered with heat moulded plain colour PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and plain colour PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either side and as gap insert for Top Rail & Bottom Rail; Panelling of plain colour PVC Sheet to be fitted in the Mild Steel Frame welded/ sealed to the Stiles and Rails with suitable PVC Sheet Beading and joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawing, complete all as specified and as directed.
S&F of Mild Steel Butt Hinge of size 100mm long (medium weight) and fixed with screws, complete all as specified and as directed.
S&F of Aluminium anodised Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed.
S&F of Aluminium Alloy Handle 125mm long Febricated type, Extruded Section and fixed, complete all as specified and as directed.
S&F Aluminium alloy, anodised, sliding door bolt of 200mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed with screws, complete all as specified and as directed.
S&F Steel Ventilator with Top hung Shutter including Hinges, Steel Peg Stay, complete all as specified and as directed.
S&F Sheet Glass, froasted type, 3.0mm thick, Square or Rectagular, area not exc. 0.50 Square Metre in Each Pane and fixing to wooden/steel Shutters, etc. with oil putty or beading, complete all as specified and as directed.
M&L Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with Trap and Fixing Bolts (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces, complete all as specified and as directed. MAKE- HINDWARE/ PRAYAG/ JAQUAR/ SOMANY/ MARC/ CERA
S&F of PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, making good disturbed surfaces in Cement Mortar 1:3, complete all as specified and as directed. MAKE- HINDWARE/ PRAYAG/ JAQUAR/ SOMANY/ MARC/ CERA
S&F of Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. MAKE- HINDWARE/ PRAYAG/ JAQUAR/ SOMANY/ MARC/ CERA
S&F of PVC Connection Pipe 15mm size with PTMT Nuts of length 600mm, complete all as specified and as directed. MAKE- PRAYAG/ POLYTUF
S&F of 100mm dia sand cast, Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall with and including necessary MS clamps, sand cast pipe, complete all as specified and as directed. MAKE- ELECTRO STEEL/ KALINGA/ KEJRIWAL/ BIC/ ISI
S&F of 100mm dia cast iron bend of any redius with oval access door, complete all as specified and as directed. MAKE- ELECTRO STEEL/ KALINGA/ KEJRIWAL/ BIC/ ISI
S&F PTMT Towel Rail 450mm long (mini-mum weight 170 Gram), fixed with and including Chromium plated Brass Screws and Wooden/Plastic Cleats and fixed-in-repairs, complete all as specified and as directed. MAKE- PRAYAG/ POLYTUF
S&F Gun metal Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe and fixed-in-repairs, complete all as specified and as directed. MAKE- ZOLOTO/ UPADHYA/ KIRLOSKAR/ L&T/ VENUS
M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate), 75mm thick as in Plinth protection, Floor, Path, etc., laid in alternate bays, finishing Concrete Surfaces Even and Fair, complete all as specified and as directed.
M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) Bed to Drain Pipe 150mm bore (dia) including Packing under and Haunching against the Sides of Pipes after they are laid in trenches and tested, complete all as specified and as directed. NOTE : Necessary Earthworks will be measured and paid for separately under appropriate Items.
M&L Salt-Glazed Stoneware Drain Pipe 150mm bore (dia), Grade ‘A’, laid in Trenches jointed with Cement Mortar 1:1 and Testing, complete all as specified and as directed. NOTE : Necessary Earthworks will be measured and paid for separately under appropriate Items.
RAI CONSTRUCTION
KWOK YING CHIU
SANJAY KAUSHIK
Damdoo Bhutia
M/S TSHERING BHUTIA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .