Bhavan Repair

Amount

Dismantling existing plaster i/c disposal of refuse within a distance of 60 m .

Dismantling of R.B.Work with disposal of refuse within 60 m.

Dismantling door and windows chaukhat with hold fast i/c stacking material within 60 m

Dismantling Brick work or stone work and cement concrete in cement mortar i/c staking of material within a distance of 60m.as per E/C

Cement plaster 12 mm thick on brick work in cement mortar 1cement : 4 coarse sand.

Cement concrete flooring 1:2:4 (1 cement:2coarse sand:4graded stone aggregate) finished with a floating coat of neat cement, including cement slurru etc. complete 40 mm thick with 20 mm nominal size stone aggregate.

Providing and laying Vitrified tiles in floor of 600 x 600mm sizes (thickness 10mm),without lean concrete with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints.

Providing & fixing 1st quality ceramic glazed tiles conforming to is 15622 (thickness to be spesified by manufacturer of approved make in all colour ,shade except burgundi , bottle green black of any size as approved by EIC in skirting riser of steps and dedo over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3 kg/sqm i/c pointing in white cement mixed with pigment of matching shade complete .

Structural steel work in single section, including cutting, hoisting, and applying a priming coat of approved steel primer all complete.

Providing and fixing ISI marked flush doors shutters 30 mm thick conferming of I.S. 2202 part-1 decorative type core of block board construction with frame of 1st class hard wood & well matched teak 3 ply veening with vertical grains or cross bend & face vaneers on both face of shutters i/c isi marked stainless steel butt hinges with nessesary screw & Fittings.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand & manufacturer. (Wood & Steel)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer including cost of all materials, labour, T&P etc required for completion of work.

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete supply of all labour material and T&P required for proper completion of work for all heights.

Finishing walls with Acrylic smooth exterior paint of required shade new work two or more coat applied @ 1.67 litr./10 sqm over and i/c priming coat of exterior primer applied @2.20 Kg/sqm supply of all labour material & T&p required for proper complition of work.

Earth work in foundation in dry ordinary soil (loam clay or sand) including lift upto 1.5m and lead upto 30m including back filling, watering and ramming of excavated earth into the structure and the sides of foundation trenches or into the plinth with removal and disposal of surplus earth as directed by E in C upto a distance of 30m from the foundation trenches.

Providing and laying Cement concrete (1:4:8) in base with cement , coarse sand , and 20mm to 40mm stone ballast including cost of all material, labour and T&P etc.complete.

Brick work in 1:4 cement mortar with cement , coarse sand , and M-150 bricks . including cost of all material, labour and T&P etc.complete.

Providing and laying RCC. (1:1.5:3) including cost of all material, labour and T&P etc.complete.(Excluding cost of Reinforcement)

Supplying of steel bars with bending,binding,cutting and placing of reinforcement including cost of wire including all material, labour and T&P etc.complete.

Centering and shuttering for RCC/RB work including cost of all material labour and T&Petc.complete, centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-centering and de-shuttering at all levels over a height of 5.0M, (plan area to be measured) for suspended floors, roofs, landing, beams and balconies.

Centering and shuttering for RCC/RB work including cost of all material labour and T&Petc.complete, centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-centering and de-shuttering at all levels over a height of 3.0M, (plan area to be measured) for suspended floors, roofs, landing, beams and balconies.

Supply and laying of I shaped zigzag precast interlocking tiles of thickness 80 mm (ordinary gray)compressive strength not less then 30mpa & weight 4.50 kg i/c 25 mm thick local sand base levelling and dressing of surface to required level and slope ,filling joints with local sand all complete work etc.

Providing and Laying kota stone slab flooring over 20mm thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete with base of cement mortar 1:4 (25 mm thick) complete.

Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required:White Vitreous China Wash basin size 550x400 mm with a single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre PVC. automatic flushing cistern

Providing and fixing P.V.C. waste pipe for sink or wash basin including PVC.Flexible pipei) 32 mm dia waste fittings complete.

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (15 mm nominal outer dia pipes) having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per diection of Engineer in Charge. (For Concealed work, including cutting chases and making good the wall etc)

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes(20 mm nominal outer dia pipes) having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipes with clamps at 1.0 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per diection of Engineer in Charge. (For External work exposed on walls)

Providing and fixing C.P. long body brass bib cock of approved quality conforming to IS standard &weighing not less then 690 grm 15 mm nominal bore

Providing and fixing brass angle valve for basin mixture and gyeser points of approved quality confirning to IS:8931. (15 mm nominal bore)

Providing & fixing Aluminium Sliding bolt 16 mm dia 250 mm long . Complete in all respect as per direction of Engineer Incharge.

Providing & fixing Aluminium door handle 125mm long . Complete in all respect as per direction of Engineer Incharge.

Providing & fixing Aluminium Tower bolt 10 mm dia, 250 mm long. Complete in all respect as per direction of Engineer Incharge.

Providing & fixing Single rubber stopper. Complete in all respect as per direction of Engineer Incharge.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with nonwoven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/ sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5 cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :

S/F Mild Steel Sign board complete in all respect as directed by Engineer in cgarge

Rakesh kumar