CERTAIN SPECIAL REPAIR AND REVENUE WORKS AT DAMANA UNDER GE JAMMU

Amount

B/R Portion: - Taking down chowkats or frames with shutter w/o taking off shutter from the frame n.exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and directed.

Taking down chowkats or frames with shutter w/o taking off shutter from the frame exc 1.5 sqm but n.exc 4 sqm each incl cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete & removing from site complete all as specified and directed by Engr-in-Charge

M&L Factory made pressed steel frames of size 105x60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkat to be welded with 02 nos 25x25x3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer & including PCC 1:3:6 type C0 in back filling of chowkats & tarring back of chowkats and holdfasts complete all as specified and directed by Engr-in-Charge

M&L Factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinge, lock strike plate etc. complete including bottom of each chowkat to be welded with 02 nos 25x25x3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer & including PCC 1:3:6 type C0 in back filling of chowkats & tarring back of chowkats and holdfasts complete all as specified and directed by Engr-in-Charge

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet & edges will be painted to match with printed sheet, reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed

S&F 30mm thick Flush shutters, soild core construction, with particle board core and plywood face panels, commercial type on both sides with lipping/frame to match complete all as specified and directed by Engr-in-Charge.

S&F 35mm thick Factory made IInd class hard wood, glazed and skelton shutter open rebated and prepared to receive glass, guage, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2009 Pt-I Section 8.24(b) supplied and fitted to chowkhats, complete all as specified and directed

S&F mild steel butt hings medium weight 100 mm long complete all as specified and directed

S&F mild steel butt hings medium weight 75 mm long complete all as specified and directed

S&F Aluminium handle cast type, anodised size 150mm long, D type complete all as specified and directed

S&F Aluminium handle cast type, anodised size 100mm long, D type complete all as specified and directed

S&F Aluminium anodised barrel tower bolts, with bright bolt and fixed 200mm complete all as specified and directed

S&F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed

S&F in repair MS Helical door spring 150mm including roller and roller plate complete fixed with welding to existing/new steel chowkhats complete all as specified and directed

S&F pre-painted (factory painted) box type mild steel windows/Ventilator (factory made) outer frame made out ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on extrernal side and gauzed shutter fixed with galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm incl necessary GI wire staples etc on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 nos on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler /AC window complete all as specified and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3 Note:- The quoted rate a shall also include (i). Two coat of synthetic enamel paint over one shop coat of zinc chromate primer on all exposed surface complete and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. colour/shade will be approved by Engineer-in-charge (ii) 4 nos MS steel lugs made of 20X5 mm Iron flat 200 mm long iii)10 mm Sq Bar grill/guard bar design as per drawing (iv) PCC block for embedding lugs complete (iv) Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks,or galvanised wire staples complete all as specified and directed

S&F 3mm thick ordinary glass sheet quality and glazing with oil putty in square n. exc 0.5 sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach up to 4 story building complete all as specified and directed

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane of thickness 3mm complete all as specified and directed

S&F Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate as 150mm complete all as specified and directed

M&L for two coat synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and directed

M&L applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including prepartion of new surface over 10cm width or girth complete all as specified and directed

M&L Rendering 20mm thick in CM 1:4 on concrete wall surface including two or more dubbing coat including necessary formwork and scaffolding surface finished even and smooth without using extra cement such as chajjas, upward fascias, and similar items up to four storey bldg including taking down of loose plaster/RCC/bricks surfaces complete all as specified and directed(incl all necessary scaffolding, lifting arrangment for three story building on external surfaces).

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key,scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and directed by Engr-in-Charge. (Note: Rates are deemed to be included for patches work)

M&L Rendering 15mm thick in CM 1:4 on fair faces of brick surface finished even and smooth without using extra cement etc complete all as specified and directed (Including all necessary scaffolding lifiting arrangement ).

M&L Rendering 15 mm thick in CM 1:6 on fair faces of concrete or brick surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Rendering 5 mm thick in CM 1:3 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge.

M&L Preparing plastered or unplastered new surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M&L applying two coats of cement based paint over a coat of primer incl preparation of new plastered surface of wall complete all as specified and directed

M&L for two coats of oil bound distemper to newly plastered surfaces including preparation/priming the surfaces and applying two coats of wall putty complete all as specified and directed by Engr-in-charge.

M&L for two coats of oil bound distemper of wall to old plastered surfaces including preparation of surfaces and applying two coats of wall putty complete all as specified and directed

M&L Preparing plastered or unplastered surfaces of ceiling and applying two coats of white wash including the filling the holes , cracks etc with putty complete all as specified and directed

Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coat of cement based paint on old prepared surfaces of walls complete all as specified and directed

Demolition of brick work built in cement mortar incl all quoins arches pillars etc complete all as specified and directed

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) but except bricks complete all as specified and directed

Dismantling floors hearth or wall tilling including cement mortor bedding (but not backing) removing unserviceable materials outside MOD area and rubbish off the premises complete all as specified and directed

M&L Non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

Description same as per serial item no 39 above but as in skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed

M&L Glazed ceramic coloured tiles 250x350/450x300x7 to 8 mm thick on vertical surface as in skirting,dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including taking down old plaster and 10 mm thick screed in CM 1:4 complete all as specified and directed .

Rougening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed

M&L Granite 20mm thick (Pure black)(tabled rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in colour cement 1;2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screedbed in cm1:4 edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and directed

S&F machine cut kota stone slab flooring 18-20mm thick over 20 mm thick cement screed bed in CM 1:4 laid and jointed with grey cement slury mixed with pigment to match the shade of the slab incluiding rubbing and polishing complete all as specified and directed by Engineer –in-Charge.

S&F machine cut kota stone slab 18-20mm thick over 10 mm thick as in vetical surface over rendering in CM 1:3 laid and jointed with grey cement slury mixed with pigment to match the shade of the slab incluiding rubbing and polishing complete all as specified and directed by Engineer –in-Charge.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves,lintels etc; and cutting chases for concealed water tubing and making good, cutting not exc. 10cm girth complete all as specified and directed

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard of bore 15mm complete all as specified and directed

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard of bore 20mm complete all as specified and directed

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm, complete all as specified and directed

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm, complete all as specified and directed

Refixing only 15mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and directed

Refixing only 20mm dia steel tubing and connections in new or old position including cleaning of old steel tubing complete all as specified and directed

Complete removal of vegetations,roots and shurbs from wall and making good the wall surface filling with PCC 1:2:4 type B0 n exc 0.5 Sqm outer area completer incl all scaffolding up to 9 mtr height of building complete all as specified and directed

S&F in repair PVC low level flushing cistern valve less,syphonic action type of 10 ltrs capacity white with inlet, ball valve, float and handle incl. cast iron brackets, PVC flush pipe 32mm dia ,PVC connection (15x 450 mm) long complete all as specified and directed

S&F in repair Vitreous china squatting pan 'Orissa' pattern ' size 580x440mm white, with integral foot rest 'P' or 'S' trap,front or back inlet including connection to trap and to flushing pipe,anti syphonage pipe, etc. Complete making good to floor as existing complete all as specified and directed by Engr-in-Charge.

Preparation of surface of sunken slab and applying 15mm thick plaster in cement morter 1:4 mixed with water proofing compound both on floor and wall @ 200ml per 50 Kg bag of cement and apply Epoxy Resin coating with modified cementtition coating like Brush Bond of Fosroc/Pedilite/Bostic as per manufacture instruction both on floor and wall complete all as specified and directed

S&Fin repairs stainless steel sink with drainage board,made of 1.00mm thick sheet for kitchen or laboratory with sink coupling, plug,washers, waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets,connecting union to pipe, overall size 915mmx460mm, bowl size (410x330x160mm) complete all as specified and directed

S&F in repairs stainless steel plate rack made out of 1mm thick sheet of size 750 x 600 x 250mm of size having partition and fixed with steel fasteners or steel screwed complete all as specified and as directed.

S&F in repairs Vitreous china wash hand basin white ,flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engr-in-charge.

S&F in repairs 15 mm dia bore brass CP WHB/sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

S&F in repair PVC connection 15mm, 450mm long with nuts and washers complete all as specified and directed.

S&F in repair 15mm bore long body Bib tap cast copper alloy fancy type chromium plated with capstan handle screwed down screwed for iron pipe or for brass ferrule and sample to be kept in AGE B/R Damana office complete all as specified and directed

S&F in repair 15 mm bore Stop valves, (Concealed type) fancy type chorominum plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair PVC Waste pipe 32 mm dia and suitable length straight or flexible type for wash hand basin / sink complete all as specified and directed

S&F in repairs chromium plated bib tap 15mm size with crutch or butterfly handle screwed down screwed fro iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repair angle/stop valve of cast copper alloy screwed down high pressure with crutch or butterfly handle screwed bother ends for iron pipe or for uniorns and fixed 15 mm bore complete all as specified and directed

S&F in repair swivel shower rose CP any colour with arm 15mm size 195mm long complete all as specified and directed

Supply and fixing in repairs Tubular towel rail, 20mm dia, D type 60cm long between flanges of brass chromium plated complete all as specified and directed

S&F in repair 125 mm dia CP steel grating fixed in position complete all as specified and directed

S&F in repair 125 mm dia CP steel grating with hole fixed in position complete all as specified and directed

Dismantling PVC water tank/demolition of RCC water storage tanks of capacity upto 1000 ltrs and removing from site complete all as specified and directed

S&F Rotational moulded polyethylene water storage tank including, plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500ltrs including making connections,20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe anf fixed (min wt210 gram) complete all as specified and directed

S&F in repair 15 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair curtain rod stainless steel with fixing brackets (wall or end), side ball stops, funnel, rollers, etc complete all as specified and directed

M&L for 50mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in floor/plinth protection laid in suitable panels finished even and fair all as spd . 6mm Joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three part of sand ( all by weight) complete all as specified and directed

M&L Second class hard wood Plain, solid, straight cubboard chowkats and frames etc, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in repairs including cutting, drilling, fixing with nails, screws etc complete all as specified and directed

S&F in repairs 18/19 mm thick Prelaminated Particle board,interior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws/nails to timber/steel frame work as in shelves,cup board shutters, book case, writing table stand, shelves etc including fixing of plain fillets square or rectangular of 2nd class hard wood not exc 3 sq.cm in leaping to shutters/shelves compete fixed complete all as specified and directed

S&F in repair continous piano hanges, mild steel,bright finish or electrogalvanised,width of flap 30mm (when open) fixed with welding complete all as specified and directed

S & F in repair Hasp & staple size 100 mm, alumium anodised, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface fininished even and smooth without using extra cement including mixing of integral water proofing compound in the proportion as per manufacturers instructions (Note- liquid water proofing compound shall be measured and paid separately)

Supply only integral liquid water proofing.

Cleaning the roof surfaces and applying bitumen primer @ 0.30 kg/sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.00 kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm, having softening point not less than 800 N /Sq cm, tearing strength of 180N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch, and applying two coat of aluminium paints on top surface complete including Removing existing treatment from roof surfaces such as tiling, tarfelt, fungus,moss,dust etc.,cleaning the surface of all foreign material by wire brushing and dusting and racking out RCC slab complete all as spd and removing the debries outside defence land complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area complete all as specified and directed by Engr-in-Charge.

M&L for Plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregates as in copings, bed block etc. and in similar works including weathering,slightly rounded or chamfered angles and throating and necessary form works,complete all as specified and directed

M& L for Cement concrete type E2, 1:5:10 (using 40mm graded aggrregate) in foundations, filling and mass concrete or in sub base below kota stone flooring complete all as specified and directed

M&L for 60 mm thick Machine pressed precast conctete interlocking colour paver block in coloured glossy finish with any colour cement and pigment , any shape and size confirming to IS 15658-2006 , M-35 Grade complete all as specified and directed

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

Demolition of cement concrete (reinforced) of any discription and in any position not otherwise specifically provided complete all as specified and directed

Pre-cast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slab fixed in position including necessary form work and set in CM 1:6 complete all as specified and directed (Reinforcement will be measured and paid separetly)

M& L for TMT Bars 10 mm dia & over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Description all as per item No 92 here- in- before, but 5 to 10mm dia as in stirrups complete all as specified and directed by Engineer-in-Charge.

S & F in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and directed

S & F in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and directed

S&F in repairs PVC SWR bends of bore 110mm dia complete all as specified and directed

S&F in repairs PVC SWR bends of bore 75 mm dia complete all as specified and directed.

S&F in repair PVC (SWR) junction double (double T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed

S&F in repair PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia complete all as specified and directed

Dismanting asbestos cement (corrugated or semicorrugated etc) sheets in roof covering complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Dismantling timber scantling 40 sq cm and over in section framed work of any description complete all as specified and directed

S&F for structural steel works of Fe 410W (Gde E 250) quality A, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. including painted one shop coat of zinc chromate/red oxide primer paint (including preparation of surface) before fabrication complete all as specified and directed

M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410W (Gde E 250) quality B complete all as specified and directed

M&L for Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15cm long complete all as specified and directed

Dismantling boarding any description fixed in any position with nail complete all as specified and directed

S&F for 4mm thick of size 605X605 mm ,white pre-premiered, self embossed, reinforced Designer board for false ceiling Conforming to IS-14862 and ISO-8336:1993 fixed/laid/ incuding GI framework at ceiling with screws frame work for ceiling with specification as under mentioned:- (i) GI section frame work (Powder coated) suitable for ceiling board, consisting of perimeter wall angle 19mmX19mmX0.45mm, cross 'Tee' 28.6mm (web)X 24mm flange 0.33mm thick powdered coated main tee 38mm (Web) X24mm flange 0.33mm thick. wall angle shall be screwed/ fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm C/C , then suspending GI main 'Tee' in both directions by means of hangers/suspenders including 4 GI wires with alignment @ 1220mm C/C to soffits. To from grid of 610X610mm cross Tee shall be provided @ 610mm C/C in both directions and all suitable provisions shall be made for fixing the recessed/surface mounting light fittings if any, complete all as specified and directed by Engr-in-Charge

M&L for RCC 1:2:4 type B-I (using 20mm graded crushed stone aggregate), as in Beams/RCC Band, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone agg) as in fdn filling and mass cement concrete, sub base of floor complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M&L for RCC desing mix M-25 using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for RCC desing mix M-25 using 20mm graded aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.

M&L for RCC desing mix M-25 using 20mm graded aggregatesas in Beams, cantilevers, bressumm- ers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC desing mix M-25 using 20mm graded aggregates as in column, pillrs, piers posts and struts etc complete all as specified and directed.

M&L for form work to sides of concrete foundation , footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter finished the surface fair complete all as specified and directed by Engineer-in-Charge.

M&L for form work to soffits of suspended slab such as roof slab, floor slab, landing and similar works, not exceeding 200mm thick (Horizontal or sloping) for fair finished complete all as specified and directed by Engineer-in-Charge.

M&L Formwork to Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc for fair finished complete all as specified and directed

M&L for Hard core, broken to gauge n exc 63 mm of broken stone to gauge nexc 63mm including as directed before spreading hard core complete all as specified and directed

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:6 complete all as specified and directed

M&L for 75 mm thick, PCC 1:4:8, type D -2 (using 40 mm graded crushed stone aggregate), as in sub base of floors complete all as specified and directed by Engr-in- Charge.

M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and directed

S & F 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall etc incl fixing with clamps complete all as specified and directed

S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall incl clamps etc complete all as specified and directed

S&F PVC SWR bends of bore 110mm dia complete all as specified and directed

S&F PVC SWR bends of bore 75 mm dia complete all as specified and directed

S&F PVC (SWR) junction double (double T) equal or unequal provided with access door of 110 mm dia complete all as specified and directed

S&F PVC (SWR) junction single (single T) equal or unequal provided with access door of 75 mm dia complete all as specified and directed

S&F PVC (SWR) vent cowl of 75 mm dia complete all as specified and directed

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75 mm dia complete all as specified and directed

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed

S&F PVC connection 15 mm size PTMT nuts of length 450 mm complete all as specified and directed

S&F Grating doom 125mm dia. with waste hole of CP (minimum weight 40 gms), complete all as specified and directed by Engr-in-Charge.

S&F 32mm dia waste coupling of PTMT,half or full threaded (minimum weight 45 gms), complete all as specified and directed.

S&F Bib taps 15mm dia , chromium plated , cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Stop/ angle valves 15mm dia bore of pipe, chromium plated, fancy type, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed by Engr-in-Charge.

S&F Stop/ angle valves twin type 15mm dia bore of pipe, chromium plated, fancy type, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed by Engr-in-Charge.

S&F Stop valves 15mm dia bore of pipe, chromium plated, fancy type, with long shank and cap (concealed type) complete all as specified & directed by Engr-in-Charge.

S&F Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts,flush pipe and joints complete all as specified and directed by Engr-in-Charge.

S&F PVC low level flushing cistern valve less,syphonic action type of 10 ltrs capacity white with inlet, ball valve, float and handle incl. cast iron brackets, PVC flush pipe 32mm dia ,PVC connection (15x 450 mm) long complete all as specified and directed

S&F Vitreous china wash hand basin white ,oval type of min 600mm inner dia including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engr-in-charge.

S&F WHB CP Mixer of bore dia of pipe 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed

Removing excavated material (soil) to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in hard/dense soil, complete all as specified and directed by Engr –in-Charge.

S&F Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including spreader of any colour PTMT complete all as specified and directed

S&F Tubular towel rail, 20mm dia, D type 60cm long between flanges of brass chromium plated complete all as specified and directed

S&F Brass chromium plated shower rose with arm n.less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and directed

S&F PVC waste pipe 32mm bore complete all as specified and directed

S&F Hand Shower (Health Faucet) (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F toilet paper holder box type Chorominum plated complete all as specified and as directed

S&F stainless steel railing exc 40 mm dia including necessary rounding, welding, and fixing screws etc complete all as specified and directed

Preparation of new plastered surfaces and applying two coat of oil bound destemper over a coat of wall care putty as on wall complete all as specified and directed

Cutting into existing manholes for 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed

M&L for 150mm bore/inner dia Double wall corrugated HDPE pipes (SN-4) with intergral socket and necessary fttings, laid in trenches jointed as per manufacturer instruction complete all as specified and directed

M&L Construction of septic tank for 100 users, exc in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole covers having 6mm plate embedded all round/ fibre reinforced cover with angle iron frame Vent Shaft and sludge chamber etc complete all as specified and directed and shown in Drg No CEPZ-C-TD-13/01-05.

M&L Construction of septic tank for 50 users, exc in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole covers having 6mm plate embedded all round/ fibre reinforced cover with angle iron frame Vent Shaft and sludge chamber etc complete all as specified and directed and shown in Drg No CEPZ-C-TD-13/01-05.

M&L Construction of septic tank for 25 users, exc in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole covers having 6mm plate embedded all round/ fibre reinforced cover with angle iron frame Vent Shaft and sludge chamber etc complete all as specified and directed and shown in Drg No CEPZ-C-TD-13/01-05.

M&L for DWCPE (SN8) 160 mm(OD) diameter Pipes with intergral socket and necessary fttings, laid in trenches jointed as per manufacturer instruction complete all as specified and directed

M&L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 (type D2 using 40 mm graded aggregate) for 300mm bore pipe complete all as specified and directed

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortar 1:4 complete all as specified and directed

Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches,sockets, ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into new concealed PVC rigid/steel conduit and into existing CI/pressed steel sunken/ terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and directed Note : (a) wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps complete all as specified and directed by Engr-in-Charge.

Description all as per serial item No 165 here in above but One 5 pin socket outlet 5 amps on the same board complete all as specified and directed

Description all as per serial item No 165 here in above but One 5 pin socket outlet, 5amps, independent complete all as specified and directed

Description all as per serial item No 165 here in above but for one 5 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed

S&F in replacement for switch piano, flush type single pole one way 5Amp, 240 volts complete all as specified and directed

S&F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified and directed

S&F in replacement Switch socket outlet combined 5 pin 5 amp flush type , 240 volts complete all as specified and directed

S&F in replacement Switch socket outlet combined 2 in 1 , 3 pin 5 amp and 15 amp flush type , 240 volts complete all as specified and directed

M& L in replacement for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed

M& L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and directed

S&F Ceiling Rose 3 terminal surface type complete all as specified and directed

S&F in replacement LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and directed

M&L for replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed by Engr-in-Charge.

S&F in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

Supply and fixing in replacement of SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

Dismantling and taking down old unsv street/security lights and Material and labour for new LED street light fittings of 30 watt system wattage and high preesure die cast aluminium housing with sealed toughened glass cover, TIP 66 protection suitable for pole mounting SMD led array with lense, cool white 6500 K, LED efficacy >120 lm/W and system efficacy 110 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -20ºC to 60ºC,built in surge protection more than 10kV with facility of power supply shall be removed without removing light fitting from pole incl make proper connection complete including cutting , welding , drilling holes, nut bolts, washer complete all as specified and directed by Engineer-in-charge.

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 6.0 Sqrmm for earth wire unsheathed , multistranded , copper conductor FRLS, drawn through the new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed Note : Wiring shall be done in proper colour coding.

M&L in repair for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed

Supply and fixing in replacement plug top 15 Amps complete all as specified and directed.

Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Supply and fixing in repair for TPN DB current carrying capacity 125 Amps suitable for accommodationg TPN miniature circuit breaker (MCB) 4 Pole and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed

Supply and fixing in repair for 415V 10KA 'B' curve TPN 40 to100 AMP miniature circuit breaker (MCB) 4 poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed

Disconnecting & taking out defective service cable any size and any type from roof, pole, pipe, floor, wall etc complete all as specified and directed

Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 16 sqmm 4.0 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc complete all as specified and directed Note: (i) Earth work, sand, bricks , removing, returning filling Aluminium thimbles/lugs will be paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.

M&L in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , multistranded , copper conductor FRLS, drawn through the new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. Note : Wiring shall be done in proper colour coding.

Supply and laying, connecting and testing XLPE underground cable insulated, and overall sheathed with aluminium conductor heavy duty 1100 volts grade 10 sqmm 2.0 core laid in trenches/ on poles/ road crossing or passing through existing/new pipe under road crossing, clamping on wall etc complete all as specified and directed Note: (i) Earth work, sand, bricks , removing, returning filling Aluminium thimbles/lugs will be paid separately. (ii) Cost of laying electrical cable through new/existing pipe under road, buildings, railway tracks, highways are incl in the quoted rates. (iii) All equipments , machinery or tools if required for laying electrical cable through new/existing pipes are provided by the contractor without any extra cost.

S&F for switch piano, flush type single pole one way 5Amp, 240 volts complete all as specified and directed

S&F for Switch socket outlet combined 5 pin 5 amp flush type, 240 volts complete all as specified and directed

S&F of Switch socket outlet combined 2 in 1 , 3 pin 5 amp and 15 amp flush type , 240 volts complete all as specified and directed

S&F for Ceiling Rose 3 terminal surface type complete all as specified and directed

S&F for LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and directed

S&F for LED lights fitting 1x 10W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (2' ft long ) with LED rod 10 watt, 230 Volts 50 Hz. complete all as specified and directed

M&L for distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed by Engr-in-Charge. Note:- Distribution board and MCBs should be same make.

S&F in 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

Supply and fixing SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

Supply and fix electric water heater geyser , storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed

M&L for fixing of 4 Nos rawl plug of suitable size (4"-6") nuts & bolts for hanging of geysers on wall complete all as specified and directed

S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed and fixed for 20 mm dia of pipe complete all as specified and directed

M&L for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S ROMESH KUMAR SHAN

STAR CONSTRUCTIONS

M/S VERMA ENTERPRISES

KRISHNA BUILDERS

Bidder Name

STAR CONSTRUCTIONS

Hare krishna engineering const.

M/S VERMA ENTERPRISES

KRISHNA BUILDERS

M/S ROMESH KUMAR SHAN