Tender ID

CPPP

To Be Opened

Works

Civil Works

Repair, maintenance and painting of CRPF Officers institute Vasant Kunj, New Delhi

DG,CRPF,MHA

CRPF Officers Institute, Vasant Kunj New Delhi | New Delhi, Delhi

Amount: Refer DocsCloses: 8 Apr 2026Closed

Timeline

Published30 Mar 2026
Closed8 Apr 2026
Bid Opening9 Apr 2026

Tender Value

Refer Docs

EMD Value

₹5.7 L

Closing Date

8 Apr 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

DIG (Engineer) Dte. CRPF

Address

Works Directorate, CRPF, Level-III, East Block-7, RK Puram, Sector-1, New Delhi-110066.

Work Description

(1) Repair, maintenance and painting including water proofing treatment AND (2) Repairing and Painting of boundary wall and replacement of interlocking paver block in surrounding areas of CRPF Officers institute (Shaurya) at Vasant Kunj, New Delh

Tender Information

Tender ID

2026_CRPF_904041_1

Reference Number

B.V.Shaurya/26-WksDte-CC/NIT90

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Works

Period of Work

120 days

Location

CRPF Officers Institute, Vasant Kunj New Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredAcceptance letter (on firm letter head) (.pdf)

RequiredEarnest Money Deposit (.pdf)

RequiredCopy of GST registration certificate and PAN Card (.pdf)

RequiredRegistration certificate of the firm/contractor (.pdf)

RequiredRegistration certificate of EPFO and ESIC (.pdf)

RequiredCheck list (Appendix-B) (.pdf)

RequiredOther relevant documents as per Tender (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹5.7 L

Important Dates

Last Activity

30 Mar 2026

Published

30 Mar 2026

Bid Opening

9 Apr 2026

Download Starts

30 Mar 2026

Download Ends

8 Apr 2026

Submission Starts

30 Mar 2026

Clarification Period

30 Mar 2026 - 2 Apr 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (16 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within alead of 50 m : Pipes, cables etc. exceeding 80 mm dia. butnot exceeding 300 mm dia
2Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived fromnatural sources : 4 graded stone aggregate 20 mm nominalsize derived from natural sources)
3Providing and fixing at or near ground level precast cement concretein kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete : 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-lIl) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
4	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand)	1	cum	-	-
5	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to 1S: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks	1	cum	-	-
6	Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels : Granite stone slab of colour black, Cherry/Ruby red : Area of slab over 0.50 sqm	1	sqm	-	-
7Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge : Granite work
8Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
9Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
10Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.30 MB

Work Item Documents

BOQ_950241.xls

BOQ • 0.42 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within alead of 50 m : Pipes, cables etc. exceeding 80 mm dia. butnot exceeding 300 mm dia
2Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived fromnatural sources : 4 graded stone aggregate 20 mm nominalsize derived from natural sources)
3Providing and fixing at or near ground level precast cement concretein kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete : 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-lIl) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
4	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand)	1	cum	-	-
5	Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to 1S: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks	1	cum	-	-
6	Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels : Granite stone slab of colour black, Cherry/Ruby red : Area of slab over 0.50 sqm	1	sqm	-	-
7Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge : Granite work
8Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
9Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
10Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within alead of 50 m : Pipes, cables etc. exceeding 80 mm dia. butnot exceeding 300 mm dia

2Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived fromnatural sources : 4 graded stone aggregate 20 mm nominalsize derived from natural sources)

3Providing and fixing at or near ground level precast cement concretein kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete : 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-lIl) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:6 (1 cement : 6 coarse sand)

cum

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to 1S: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks

cum

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels : Granite stone slab of colour black, Cherry/Ruby red : Area of slab over 0.50 sqm

sqm

7Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge : Granite work

8Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.

9Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

10Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws