Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹2.4 L
Closing Date
13 Oct 2026, 11:00 am
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
120 days
Expenditure
General
P15
3 conditions · 3 needing a document upload
i) Bulk order will be placed on the manufacturer or its authorized agent. The manufacturer firm must have satisfactorily executed at least one single purchase order for a minimum 20 percent of total tendered quantity or many small order totaling to 20 percent or more of the tender quantity of Zonal Railways/PU/CORE/PSU OR any other Govt. organisation for the tender item[OR] for the items having same description, but of different sizes/ratings/ capacities during 10 previous financial years and current financial years up to date of tender opening. Purchase officers can consider such firms for bulk order duly keeping in view the overall performance of the firm. (ii) All other offers, who are otherwise not eligible for regular bulk order(s) due to their not meeting with the eligibility conditions mentioned in Para 2.1.(i) above and provided they are able to demonstrate their capacity-Cum Capability to manufacture the tendered item, Can be considered only for developmental order up to 20 percent of the net procurable quantity. For this purpose, they should be submit along with their offer , documented past performance reports of same or similar performance reports of same or similar items of equivalent rating or equivalent performance parameters, details of M&P, testing facility, QAP(if available), technical manpower available with them, registration same/similar item(s) with other Government Agencies or PSUs etc. or any other details as may be warranted as per technical specification and drawing. Such tendersrs are to note that non submission of such documents as per Annexure shall be taken as their not having any such past performance and/ or capacity, and their offer shall be considered further as per extent rules and not back reference in this regard will be made to them. iii) Only Manufacturers/OEMs or their authorized dealers/ distributors need to quote with tender specific authorization from the manufacturers failing which offer will be summarily rejected.While issuing such authorizations the approved vendors/developmental vendors/Manufacturers must ensure that these authorized dealers/distributors are in a position to raise inspection requests on IREPS. iv) In case tenderers participates as an authorized agent, then the performance as required above shall be that of the Principal, authorizing the agent. It may so happen that the agent has credentials of past supply for a different Principal but this will not be considered as performance for placing bulk order in case of change of Principal. v) The onus of submission of requisite documents ( such as copies of Receipt note for stock items, receipt & acceptance for Non-stock items,documents related to performance, Capacity & capability credential, M&P required for manufacturing tendered item, T&P, Technical manpower, in house testing facilities, MSE credentials, financial credential PAN no/ITCC etc.) along with their e-offer lies with the tenderers failing which offer will be summarily rejected.
In keeping with the Public Procurement (Preference to Make in India) Order, 2017 as amended and in terms of clause 2.4.2 of Instructions to tenderers for e-Tender, NR ITT Rev.1.21 of April 2024 and its applicable correction slips, Public Procurement of this item is restricted to Class-I and Class -II local suppliers only. Bidders are required to indicate the Local Content in their offered product in the requisite field in the offer form.
Special attention is also drawn to para 2.4.3 of Instructions to Tenderers for Electronic Tenders, NR ITT Rev.1.21 of April 2024 and its applicable correction slips, regarding Restrictions on procurement from bidders from countries sharing land borders with India. All bidders are required to submit a certificate as per format given in Clause 2.4.3 of the said document.
26 conditions
In terms of clause 3.0 of the Instructions to Tenderers for E.tenders, NR ITT Rev.1.21 of April 2024 and its applicable correction slips, Bidders, not failing in the exempt category for furnishing EMD, are required to Mandatorily furnish the requisite EMD along with their offer, Failing which their offer will be summarily rejected.successful bidders unless failing in the exempt category for submission of S.D. are mandatorily required to submit Security Deposit.
The tenderers in their bids shall indicate the details of their jurisdictional assessing officers (Designation, address & email ID). Also tenders are required to furnish the correct HSN code for the offered item along with their bid.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items , and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Correspondence : Mail ID of the tender publishing section is [email protected] and cc to [email protected]
Bank Account details for the purpose of payment shall be taken as appearing in the profile of the vendor in IREPS. In case, there is any change in the bank account details, vendors are advised to update their bank account details in their IREPS profile. The Details of Bank Account of FA & CAO/NR for the purpose of submission of Bank Guarantee towards Security Deposit are as under: S.No. Particulars Details Name of the Bank : State Bank of India Account No. : 30788224089 Name of the Branch : New Delhi Main Branch (00691) Name of Account holder : Northern Railway (HQ) (Receipt A/c) IFSC Code : SBIN0000691
Corrigendum: Purchaser reserves the right to issue any corrigendum to the tender up to five days prior to the due date of opening of the tender, excluding the date of opening. Tenderers are also advised, in their own interest, to regularly check, till the opening of the tender, the website www.ireps.gov.in to see whether any such corrigendum to the tender has been issued or not and for submitting their e-bids or revising their e-bids.
In order to avail Benefits and preferential treatment entitled to MSE's , the MSE's bidders must be registered with UDYAM (UDYAM Registration Certificate) as per terms of clause 2.4.1 of the Instructions to Tenderers for e-tenders, NR ITT Rev.1.21 of April 2024 and its applicable correction slips.
1 condition
Validity of Offer:- No deviation from the offer validity period stipulated in the tender is permitted.
3 locations across Haryana, Uttar Pradesh, Delhi · 480 Set total
Manufacturing and Supply of complete set of Inspection Gauges
15265093~NR
15265093
Open - Indigenous
Goods
Haryana
₹0
₹2.4 L
8 Sept 2026
8 Sept 2026
9 items · 480 Set total
Manufacturing and Supply of complete set of inspection gauges as per RDSO Drg. No. T-900 3 (Part) (Alteration 03) for 10125 mm Curved Switch with 60E1 A1 Thick Web Tongue Rails for 1 in 12 Turn out B.G (1673 mm) for 60E1 rail on PSC Sleeper to RDSO Drg. No. RT-6155 along with testing and calibratio n by any government approved lab or by any NABL accredited labs and confirming to Specification, Materia l: 3 mm Thick Tool Steel Plate of grade TC-3 (Table-1) of IS: 1570 (part-6) OR Equivalent or Higher Hardness . The gauges are to be supplied in in a wooden case. One set consist of:- (i) Gauge No. 1/A - End Templates at Actual Toe of switch (For Right Side Tongue Rail) (ii) Gauge No. 1/B- End Templates at Actual Toe of swit ch (For Left Side Tongue Rail) (iii) Gauge no. 2/A & 2/B- Head Width Checking Gauge at Point 'H' (2678mm f rom ATS)(22 mm Head Thickness) (iv) Gauge No. 2/1- Head Width Checking combined Gauge at Point 'H' (2 678mm from ATS) (22 mm Head Thickness) (v) Gauge No. 3/A & 3/B - Head Width Checking Gauge at Point 'G' (4958mm from ATS) (55 mm Head Thickness) (vi) Gauge No. 3/1- Head Width Checking combined Gaug e at Point 'G' (4958mm from ATS) (55 mm Head Thickness). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PWI /TD/UMB, NR | Haryana | 16.00 Set |
| Total | 16 Set | |
Manufacturing and Supply of complete set of inspection gauges as per RDSO Drg. No. T-900 2 (Part) (Alteration 02) for 6400 mm Curved Switch with 60E1 A1 Thick Web Tongue Rails for 1 in 8.5 Turno ut B.G (1673 mm) for 60E1 rail on PSC Sleeper to RDSO Drg. No. RT-6280 along with testing and calibration by any government approved lab or by any NABL accredited labs and confirming to Specification, Material: 3 mm Thick Tool Steel Plate of grade TC-3 (Table-1) of IS: 1570 (part-6) OR Equivalent or Higher Hardness. The gauges are to be supplied in in a wooden case. One set consist of:- (i) Gauge No. 1/A & 1/B - End Templ ates at Actual Toe (ii) Gauge no. 2/A & 2/B- Head Width Checking Gauge at Point 'H' (22 mm Head Thicknes s) (iii) Gauge No. 2/1- Head Width Checking Gauge at Point 'H' (22 mm Head Thickness) (iv) Gauge No. 3/A & 3/B - Head Width Checking Gauge at Point 'G' (55 mm Head Thickness) (v) Gauge No. 3/1- Head Width C hecking Gauge at Point 'G' (55 mm Head Thickness). [ Warranty Period: 30 Months after the date of deliv ery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| ASS.EXECUTIVE ENGG.TRACK DEPOT,N.RLY GZB PIN 20100, NR | Uttar Pradesh | 54.00 Set |
| Total | 54 Set | |
Manufacturing and Supply of complete set of inspection gauges as per RDSO Drg. No. T-900 3 (Part) (Alteration 03) for 10125 mm Curved Switch with 60E1 A1 Thick Web Tongue Rails for 1 in 12 Turn out B.G (1673 mm) for 60E1 rail on PSC Sleeper to RDSO Drg. No. RT-6155 along with testing and calibratio n by any government approved lab or by any NABL accredited labs and confirming to Specification, Materia l: 3 mm Thick Tool Steel Plate of grade TC-3 (Table-1) of IS: 1570 (part-6) OR Equivalent or Higher Hardness . The gauges are to be supplied in in a wooden case. One set consist of:- (i) Gauge No. 1/A - End Templates at Actual Toe of switch (For Right Side Tongue Rail) (ii) Gauge No. 1/B- End Templates at Actual Toe of swit ch (For Left Side Tongue Rail) (iii) Gauge no. 2/A & 2/B- Head Width Checking Gauge at Point 'H' (2678mm f rom ATS)(22 mm Head Thickness) (iv) Gauge No. 2/1- Head Width Checking combined Gauge at Point 'H' (2 678mm from ATS) (22 mm Head Thickness) (v) Gauge No. 3/A & 3/B - Head Width Checking Gauge at Point 'G' (4958mm from ATS) (55 mm Head Thickness) (vi) Gauge No. 3/1- Head Width Checking combined Gaug e at Point 'G' (4958mm from ATS) (55 mm Head Thickness). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| ASS.EXECUTIVE ENGG.TRACK DEPOT,N.RLY GZB PIN 20100, NR | Uttar Pradesh | 104.00 Set |
| Total | 104 Set | |
Manufacturing and Supply of complete set of inspection gauges as per RDSO Drg. No. T-621 5 (Part) (Alteration-05) for 10125mm Over Riding Fan Shaped Switch (Curved) B.G for 60 E1 Rail on PSC Sle epers to RDSO Drg. No. T-4219 along with testing and calibration by any government approved lab or by an y NABL accredited labs and confirming to Specification, Material: 3 mm Thick Tool Steel Plate of grade TC-3 (Table-1) of IS: 1570 (part-6) OR Equivalent of Higher Hardness. The gauges are to be supplied in in a wood en case. One set consists of:- (i) Gauge No. 1/A- End Template-Z at point R (ATS) (For Right Side Tongue Ra il) (ii) Gauge No. 1/B- End Template-Z at point R (ATS) (For Left Side Tongue Rail) (ii) Gauge No. 2- Under C utting of Tongue Rail Foot at ATS (iii) Gauge No. 3 - 13 mm Head Thickness (at 1682 mm from ATS) (iv) Ga uge No. 6 -12R Toe Radius at ATS (v) Gauge No. 35- Tongue Rail Head Thickness (at 4244mm from ATS). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| ASS.EXECUTIVE ENGG.TRACK DEPOT,N.RLY GZB PIN 20100, NR | Uttar Pradesh | 104.00 Set |
| Total | 104 Set | |
Manufacturing and Supply of complete set of inspection gauges as per RDSO Drg. No. T-621 3 (Part) (Alt. 03) for 6400 mm Over Riding Fan Shaped Curved Switch B.G for 60E1 rail on PSC Sleeper to R DSO Drg. No. RT-4966 for use indepot along with testing and calibration by any government approved lab o r by any NABL accredited labs and confirming to Specification, Material: 3 mm Thick Tool Steel Plate of grad e TC-3 (Table-1) of IS:1570 (part-6) OR Equivalent of Higher Hardness. The gauges are to be supplied in in a wooden case. One set consist of: (i) Gauge No. 1/A - End Templates Y at point R (ATS) (For Right Side Ton gue Rail) (ii) Gauge no. 1/B - End Templates Y at point R (ATS) (For Left Side Tongue Rail) (iii) Gauge No. 2 - Under cutting of Tongue Rail Foot (iv) Gauge No. 3 - 13 mm Head Thickness (at 476.5 mm from ATS) (v) Ga uge No. 6- 12R Toe Radius at ATS (vi) Gauge No. 33- Tongue Rail Head Thickness (at 2348 mm from ATS). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| ASS.EXECUTIVE ENGG.TRACK DEPOT,N.RLY GZB PIN 20100, NR | Uttar Pradesh | 104.00 Set |
| Total | 104 Set | |
Manufacturing and Supply of complete set of inspection gauges as per RDSO Drg. No. T-621 5 (Part) (Alteration-05) for 10125mm Over Riding Fan Shaped Switch (Curved) B.G for 60 E1 Rail on PSC Sle epers to RDSO Drg. No. T-4219 along with testing and calibration by any government approved lab or by an y NABL accredited labs and confirming to Specification, Material: 3 mm Thick Tool Steel Plate of grade TC-3 (Table-1) of IS: 1570 (part-6) OR Equivalent of Higher Hardness. The gauges are to be supplied in in a wood en case. One set consists of:- (i) Gauge No. 1/A- End Template-Z at point R (ATS) (For Right Side Tongue Ra il) (ii) Gauge No. 1/B- End Template-Z at point R (ATS) (For Left Side Tongue Rail) (ii) Gauge No. 2- Under C utting of Tongue Rail Foot at ATS (iii) Gauge No. 3 - 13 mm Head Thickness (at 1682 mm from ATS) (iv) Ga uge No. 6 -12R Toe Radius at ATS (v) Gauge No. 35- Tongue Rail Head Thickness (at 4244mm from ATS). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PWI /TD/UMB, NR | Haryana | 16.00 Set |
| Total | 16 Set | |
Manufacturing and Supply of complete set of inspection gauges as per RDSO Drg. No. T-621 3 (Part) (Alt. 03) for 6400 mm Over Riding Fan Shaped Curved Switch B.G for 60E1 rail on PSC Sleeper to R DSO Drg. No. RT-4966 for use indepot along with testing and calibration by any government approved lab o r by any NABL accredited labs and confirming to Specification, Material: 3 mm Thick Tool Steel Plate of grad e TC-3 (Table-1) of IS:1570 (part-6) OR Equivalent of Higher Hardness. The gauges are to be supplied in in a wooden case. One set consist of: (i) Gauge No. 1/A - End Templates Y at point R (ATS) (For Right Side Ton gue Rail) (ii) Gauge no. 1/B - End Templates Y at point R (ATS) (For Left Side Tongue Rail) (iii) Gauge No. 2 - Under cutting of Tongue Rail Foot (iv) Gauge No. 3 - 13 mm Head Thickness (at 476.5 mm from ATS) (v) Ga uge No. 6- 12R Toe Radius at ATS (vi) Gauge No. 33- Tongue Rail Head Thickness (at 2348 mm from ATS). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PWI /TD/UMB, NR | Haryana | 16.00 Set |
| Total | 16 Set | |
Manufacturing and Supply of complete set of inspection gauges as per RDSO Drg. No. T-900 2 (Part) (Alteration 02) for 6400 mm Curved Switch with 60E1 A1 Thick Web Tongue Rails for 1 in 8.5 Turno ut B.G (1673 mm) for 60E1 rail on PSC Sleeper to RDSO Drg. No. RT-6280 along with testing and calibration by any government approved lab or by any NABL accredited labs and confirming to Specification, Material: 3 mm Thick Tool Steel Plate of grade TC-3 (Table-1) of IS: 1570 (part-6) OR Equivalent or Higher Hardness. The gauges are to be supplied in in a wooden case. One set consist of:- (i) Gauge No. 1/A & 1/B - End Templ ates at Actual Toe (ii) Gauge no. 2/A & 2/B- Head Width Checking Gauge at Point 'H' (22 mm Head Thicknes s) (iii) Gauge No. 2/1- Head Width Checking Gauge at Point 'H' (22 mm Head Thickness) (iv) Gauge No. 3/A & 3/B - Head Width Checking Gauge at Point 'G' (55 mm Head Thickness) (v) Gauge No. 3/1- Head Width C hecking Gauge at Point 'G' (55 mm Head Thickness). [ Warranty Period: 30 Months after the date of deliv ery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| PWI /TD/UMB, NR | Haryana | 16.00 Set |
| Total | 16 Set | |
Manufacturing and Supply of complete set of inspection gauges as per RDSO Drg. No. T-900 2 (Part) (Alteration 02) for 6400 mm Curved Switch with 60E1 A1 Thick Web Tongue Rails for 1 in 8.5 Turno ut B.G (1673 mm) for 60E1 rail on PSC Sleeper to RDSO Drg. No. RT-6280 along with testing and calibration by any government approved lab or by any NABL accredited labs and confirming to Specification, Material: 3 mm Thick Tool Steel Plate of grade TC-3 (Table-1) of IS: 1570 (part-6) OR Equivalent or Higher Hardness. The gauges are to be supplied in in a wooden case. One set consist of:- (i) Gauge No. 1/A & 1/B - End Templ ates at Actual Toe (ii) Gauge no. 2/A & 2/B- Head Width Checking Gauge at Point 'H' (22 mm Head Thicknes s) (iii) Gauge No. 2/1- Head Width Checking Gauge at Point 'H' (22 mm Head Thickness) (iv) Gauge No. 3/A & 3/B - Head Width Checking Gauge at Point 'G' (55 mm Head Thickness) (v) Gauge No. 3/1- Head Width C hecking Gauge at Point 'G' (55 mm Head Thickness). [ Warranty Period: 30 Months after the date of deliv ery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| DEPOT STORE KEEPER/TD/SHAKURBASTI, NR | Delhi | 50.00 Set |
| Total | 50 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5891627.pdf
ATTACHMENT
5891640.pdf
ATTACHMENT
5891634.pdf
ATTACHMENT
5891633.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .