Face-lifting of Guest rooms (84 Nos) at Taramani Guest House (TGH) in IIT Madras

Amount

Demolishing all type of brick work, RCC work manually/ by mechanical means, tile work in floors, Walls and roofs laid in cement mortar of all thickness, surkhi concrete in sunken portion, Removing Toilet Fittings Such as Wash basins, Urinals, Taps, Mirror, Flush Tank, Doors, concealed and external delivery lines, soil lines including urinal and wash basin lines Etc complete toilet. all including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. Rate quoted shall be lump sum per toilet

Disposal of all building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved corporation dumping ground outside IIT Madras campus or as approved by Engineer-in charge, beyond 50m initial lead, for all leads including all lifts involved. Contractor shall remove all debris generated during construction work

Supplying and laying vermiculate (light weight aggregate) concrete with a ratio of 1:4 (1 cement :4 helite aggregate ) including compacting and laying. The rate inclusive of labour charges for mixing, laying etc complete.

Providing and laying first quality vitrified tiles of matt finish (Johnson/Kajaria/Somany) for floors of size 600mm X 300mm or 600mm X 600mm or higher size of varying thickness of approved shade and pattern in flooring for toilet on bed plaster CM 1:4 (1 cement: 4 coarse M-sand), 20mm thick with sieved M-sand mixed with approved water proofing compound including pointing the joints with white cement and matching pigment etc., complete. Rate quoted shall include providing spacers of 3mm thick for laying tile flooring and grouting the joints with cerafil (Epoxy germ proof joint grout)or equivalent bonding agents instead of ordinary pointing for the tile various size.

Providing and fixing 1st quality vitrified wall tiles of size1200mm x800mm or higher conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved making all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-charge, over 12mm thick bed of cement mortar 1:3 (1 cement:3 coarse M-sand) and jointing with grey cement slurry @ 3.3kg per sqm , including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 1st quality vitrified wall tiles of size 600mm X 300mm or higher conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved making all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-charge, over 12mm thick bed of cement mortar 1:3 (1 cement:3 coarse M-sand) and jointing with grey cement slurry @ 3.3kg per sqm , including pointing in white cement mixed with pigment of matching shade complete.

Supplying and applying ( MIXGUARD HR-5 or equivalent product of SIKA/ FOSROC/ BASF) cold applied elastomeric water proof membrane over the prepared surface as per the manufacturer specification . Total build up DFT of the system will be 1700 microns.

Providing and fixing white vitreous china extended wall mounting water closet of Hindware Mario Extended Wall Mounted Closet (Catalogue No.20084) (Base price - Rs.11,300 per No) or Equivalent material, nuts, bolts and gasket, cutting the walls, making good to the walls, complete as approved by Engineer-in-charge

Providing and fixing of Health Faucet of kohler 12929IN-CP or Equivalent material as (Base Price - Rs.2952 per Nos) including all necessary fittings etc. complete as approved by Engineer-in-charge

Providing and fixing kohler counter top wash basin of model No : kohler 75356IN-1-0 (Base Price - Rs.10,400 per Nos) along with Grid drain of kohler model No: 45432IN-CP (Base Price - Rs. 648 per No), bottle trap (1 No) of kohler model no : 7314IN-CP (Base Price - Rs. 2040 per No), pillar cock (1 No) of kohler Model No: 72288IN-4-CP (Base Price - Rs.3760 per No), Angle cock (1 Nos) of kohler model No : 11568IN-7-CP (Base price - Rs. 696 per No) or Equivalent material, unplasticised PVC connection pipe with brass unions (Kohinoor) 45 cm length 15mm nominal bore (1 Nos) and etc complete as per instruction of Engineer-in-charge

Providing and fixing kohler counter top wash basin of model No : kohler 24985K-1-0 (Base price - Rs. 7200 per No) along with Grid drain of kohler model No: 45432IN-CP(Base Price - Rs. 648 per No), bottle trap (1 No) of kohler model no : 7314IN-CP (Base Price - Rs. 2040 per No), pillar cock (1 No) of kohler Model No: 72288IN-4-CP (Base Price - Rs.3760 per No) , Angle cock (1 Nos) of kohler model No : 11568IN-7-CP (Base price - Rs. 696 per No) or Equivalent material, unplasticised PVC connection pipe with brass unions (Kohinoor) 45 cm length 15mm nominal bore (1 Nos) and complete

Providing and fixing of 8mm thick Modi float/ Saint Gobain make Frameless Mirror with beweled edges/ edge moulded and fixing the same on wall with SS stud of required number etc.,

Providing and fixing 450mm long shower arm of kohler Model No: 16346IN-CP (Base price - Rs.2584 per No), Square rain shower of kohler Model No : 73199IN-CP (Base Price - Rs.5600 per No) with concealed shower diverter of kohler model No: 882IN-CP (Base Price - Rs.3664 per No), shower trim set of kohler model No: 72290IN-4FP-CP (Base price Rs.3298 per No) and bath spout of kohler model No:99061IN-CP (Base Rate - Rs. 2680 per No) or Equivalent material including cutting to the walls making good to the walls etc and complete as per instruction of Engineer incharge

Providing & fixing 2-way CP bip tap of kohler Model No: K-11733IN-4-CP (Base Price - Rs. 3976 per No) or Equivalent material with CP extension nipple of required length, CP flange and making good the walls

Providing and fixing PVC heavy duty nahini trap of dia 150mm

Providing and fixing C.P brass angle valve for basin mixer and geyser points of kohler 11568IN-7-CP (Base price - Rs. 696 per No) or Equivalent material complete as per instruction of Engineer Incharge

Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore complete as oer direction of Engineer-in-charge

Providing and fixing of CP Liquid soap dispenser of kohler 10712D-CP (Base price - Rs. 2616 per No) or Equivalent material with necessary Screws and etc. complete as per direction of Engineer-in-charge

Providing and fixing of Soap dish of kohler 5634IN-CP (Base price - Rs.584 per No) or Equivalent material with necessary Screws and etc. complete as per direction of Engineer-in-charge.

Providing and fixing glass shelf of Jaquar Model No. 1173 (Base price - Rs. 840 per No) or Equivalent material with necessary Screws and etc. complete as per direction of Engineer-in-charge.

Providing and fixing Towel Ring of kohler 5631IN-CP (Base price - Rs. 1024 per No) or Equivalent material with Necessary Screws and etc. complete as per direction of Engineer-in-charge

Supplying and fixing towel rack of kohler 25066IN-CP (Base price - Rs. 5456 per No) or Equivalent material with Necessary Screws and etc. complete as per direction of Engineer-in-charge

Supplying and fixing towel rod (600mm long) of kohler 5630IN-CP (Base price - Rs. 1152 per No) or Equivalent material with Necessary Screws and etc. complete as per direction of Engineer-in-charge

Supplying and fixing Tooth Brush holder of kohler 5637IN-CP (Base price - Rs. 792 per No) or Equivalent material with Necessary Screws and etc. complete as per direction of Engineer-in-charge

Supplying and fixing Toilet paper holder of kohler 25071IN-CP (Base price - Rs. 1080 per No) or Equivalent material with Necessary Screws and etc. complete as per direction of Engineer-in-charge

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) - Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked Stainless steel butt hinges with necessary screws excluding panelling which will be paid for separately- Second class teak wood - Second class teak wood 35mm thick shutters

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Second class teak wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing 32mm dia CPVC valve for CPVC pipe line including cutting and fixing and etc complete as per direction of Engineer-in-charge

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes (Internal Work concealed in wall)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 40 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 50 mm nominal outer dia Pipes

Charges for insulating the pipe of 40/50mm dia with rock wool/PUF covered with aluminium cladding

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes / SWR pipe conforming to IS : 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion (Finolex/Prince/Supreme). Single socketed pipe 75mm diameter. Rate quoted shall inclusive of Tee's, Bend, Shoe, Coupler, etc and complete

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes / SWR pipe conforming to IS : 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion (Finolex/Prince/Supreme). Single socketed pipe 110mm diameter. Rate quoted shall inclusive of Tee's, Bend, Shoe, Coupler, etc and complete

Providing and fixing factory made uPVC white colour glazed windows/ventilators for toilets comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.

Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 2nd class teak wood beading 62X19 mm

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand)

Constructing fly ash brick masonry chamber 60 x 60 x 75 cm,-Constructing brick masonry manhole / chamber in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with SFRC over with frame of grade M25 or above, earth work, foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Supplying and fixing GI base clamp of all size (galvanised) for laying/ fixing pipe lines of various diameter on walls, the rate inclusive of necessary U-clamp for fixing pipes, anchor fastener for fixing the clamp etc complete. The measurement will be made based on the actual weight of the clamp and necessary bolt.

Cutting holes up to 15 x 15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and fixing square mouth SW gully trap grade A complete with CI grating brick masonry chamber with water tight SFRC cover with frame of 300x300mm size with weight of 7.20kg/Sqcm - 150x100 mm size P Type or 200 x 100mm

Supplying and filling of quarry dust in layer not exceeding 20cm and watering each layer thoroughly with consolidation and ramming etc., complete for basement and in foundation.

Providing and fixing bright finished brass tower bolts with necessary screws etc. complete - 200mm X 10mm

Providing and fixing bright finished brass tower bolts with necessary screws etc. complete - 150mm X 10mm

Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete

Providing and fixing Electronic digital locking system to all room entrance doors of ARCHIS make (Base Price - Rs. 14,000 per No) or equivalent with TWO Digital programmable Electronic card and also manual operated Keys in duplicate to entrance doors etc all complete and as per the direction of Engineer-in-Charge. Rate quoted shall include making necessary alterations in the existing doors for fixing the lock and finishing it in all aspects

Providing and fixing bright finished brass handles with screws etc. complete: (Godrej / Link) - 125mm

Easing of windows / doors for smooth operation including removal and refixing if required after planning the edges etc, necessary painting of the planned surface with matching paint over a coat of primer, screws etc complete. (rate for one shutter)

Labour charge for repairing the existing wooden door / window frame shutters including repairs to the existing frames / shutters after removing from the original position and refixing the same after repairing. . The rate inclusive of cost of wooden pieces, screws etc but excluding cost of fittings. The rate shall be applicable to area of opening up to 3.00sqm. The Payment will be made for each shutter of door / window.

Renewing glass panes in wooden, steel and aluminium windows/ doors/ ventilators with necessary PVC Neo prine gaskets or wooden fillets / beading or fixing putty for steel windows or matching with existing joineries - Glass panes weighing 10 Kg / Sqm (4.5 mm thick) - Area upto 0.5 Sqm.

Renewing glass panes in wooden, steel and aluminium windows/ doors/ ventilators with necessary PVC Neo prine gaskets or wooden fillets / beading or fixing putty for steel windows or matching with existing joineries - Glass panes weighing 10 Kg / Sqm (4.5 mm thick) - Area 0.5 Sqm to 1.5 Sqm.

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete - Twin Rubber Type

Providing and fixing stainless steel louvers of required size to the existing panelled/ flush doors. The rate shall include cost of wooden pieces, screws and labour charges for removing the existing door, cutting, alteration and refixing it to the same position (Front elevation of the Louver will be measured for payment)

Providing and fixing bright finished Brass Hinges 150 mm with Brass screws etc. complete as per the direction of Engineer in charge.(Godrej)

Providing and fixing pelmet arm door closer of hardwyn make (195mm X 50mm X 38mm ) with necessary accessories and screws etc complete

Reinforced Cement Concrete work in beams, suspended floors, roofs having slope up to 15 degrees, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases up to floor five level excluding the cost of centring and shuttering – M 25 grade concrete. All works above plinth level

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand OR M-Sand: 6 graded stone aggregate 40 mm nominal size)

Brick work with Fly ash concrete blocks of class designation M100 in superstructure upto Floor-V level in Cement mortar 1:4(1cement :4 coarse sand)

Providing and fixing 18mm thick mirror polished, machine cut Granite for kitchen platforms, vanity counters, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1 : 4 (1 cement : 4 coarse sand) Granite black Area of each slab above 0.50 sqm

Extra for providing edge moulding to 18mm thick stone counters, vanities etc., including machine polishing to edge to give high glass finish etc., complete as per design approved by Engineer - in – charge Granite work

Making and Cutting of oval shape / round opening in the granite for fixing wash basin / sink and neatly finishing etc complete as per the directions of Engineer in charge.

Supplying cutting bending and fabricating and placing in position as directed steel (SAIL, TISCO or RINL) reinforcement for RCC works in all floors, using MS or High Strength Deformed bars/RTS and MS binding wire 18 gauge etc complete at all levels. Fe 500D grade

Providing centring shuttering and form work for RCC works for all applicable RCC items in this schedule using best quality of film coated plywood / MS Sheets centring and shuttering materials, for required heights and sizes in all floors and all levels including charges for demoulding agent, removal of form work etc complete at all levels.

Removing the existing wall finishing in interior faces such as white washing/Oil Bound distempering/plastic Emulsion paint etc., by thoroughly scrapping, sand papering, cleaning washing and preparing the surface smooth including necessary repairs to scratches cleaning etc., complete

Providing and applying cement based putty M/s Birla or equivalent of upto 2 mm thickness over plastered surface to prepare the surface even and smooth etc complete

Applying super premium quality 100% Exterior Acrylic (Asian / ICI /Berger) emulsion two or more coat over dry surface after removal of all loose or defective paint or powdery residue by through brushing and scrapping, using a stiff wire or fibre brush followed by water jetting if required. Treat surface affected by mould, lichens algae and moss with 1% solution of surface treatment chemical (STC). The rate inclusive of applying necessary primer. two or more coat

Interior painting: (two or more coats over a primer coat including complete scraping, other surface preparation like removal of loose paint residuals, damaged plastering, repairs to plaster, white cement based (JK / Birla) touch up putty / primer and making good the wall surface etc) Applying interior paint of approved colour, make, brand and product at the approved rate of surface coverage of painting as per Annexure A.1.3. The interior paint shall be applied over dry surface after complete scraping and removal of all loose or defective paint or powdery residue using mechanical methods with Zero dust vacuum technology followed with sealing the surface with a coat of approved interior primer before application of top coat of exterior paint. The contractor shall also carryout necessary surface preparation including removal of loose plastering, patch plastering, crack filling, micro-concreting, application of damp proof coating and making good the wall surface etc wherever required before applying primer coat. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The work shall be executed as per the detailed specifications and special conditions mentioned in the Annexure 1. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.

Enamel painting for doors / windows / wall panels (two or more coats including a coat of primer) on both exterior and interior surface of wooden and steel joineries using approved colour, make and brand of synthetic enamel paint two or more coats over a coat of primer as per Annexure A.1.4. (Top coat enamel coverage not less than 8.83sqm per litre for two coats over a coat of primer as per manufacturers specifications). The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The work shall be executed as per the detailed specifications. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc. (Asian (Premium Gloss Enamel) / Berger Luxol High Gloss Enamel / ICI (AkzoNobel) Gloss Enamel / Nerolac / Nippon Hi Gloss Enamel).

Enamel painting for doors / windows / wall panels (two or more coats excluding primer) on both exterior and interior surface of wooden and steel joineries using approved colour, make and brand of synthetic enamel paint two or more coats as per Annexure A.1.4. The contractor should ensure complete covering of floors using tarpaulin / plastic sheet while taking up the work. The work shall be executed as per the detailed specifications and special conditions. The rate quoted shall be inclusive of charges towards all labour, material, transport, scaffolding, safety arrangements, Personal Protective Equipments (PPE), tools and plants etc.

Melamine polishing with spray (one or more coats including a coat of wood filler and sealant) with finishing neat etc. complete for various types of Furnitures and wood works. (MRF or Equivalent). For furnitures Surface area will be measured for payment

Providing and fixing M.S. grills of required pattern in frames of windows, etc. with M.S. flats, square or round bars etc. all complete Fixed to openings / wooden frames for windows with rawl plugs, screws, etc. or welding to the existing grills.

Supplying and fixing "Daiken" Acoustical ceiling with regular grid system at all levels. Providing and fixing Daiken mineral fibre ceiling tiles, false ceiling with hot dipped galvanized steel grid work. Surface chemicals cleaned capping pre-finished in baked polyester paint main tiles of size 600x600mm as per manufacturer specification.

Providing and fixing the Sunmica/laminated sheet 1mm thick for cupboard shutter & cupboard work including cost of labour charges for fixing including providing teak wood beading of 19x6mm (if needed) all-round etc complete as directed.

Providing and fixing ISI marked flush door shutters decorative type, core of block board construction with frame of First class hard wood and well matched commercial ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30mm thick including ISI marked Stainless steel butt hinges with necessary screws - Non Decorative type

Extra for providing lipping with second class teak wood battens 25mm minimum depth on all edges of shutters ( Overall area of door shutter to be measured)

Providing and Fixing fibreglass mosquito mesh of Saint Gobain or Equivalent make in various sizes to the existing windows and ventilators with required Velcro tapes of required size including arrangements (openings) for handling the window shutters, nails, labour etc complete as per the direction of Engineer-in-charge

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. It shall be provided with decorative veneering on both sides using veneered particle board conforming to IS 3097 Grade I and teak wood lipping of size 25x3 mm

Providing and fixing curtain pipe of 25mm dia Stainless steel pipes including Brass decorative bracket sets at each end including necessary screws etc complete as per the direction of Engineer in charge.

Providing 2mm thick Plaster of paris covering over the plastic sheet on the existing floors of the rooms to prevent the damage to the existing tiles. The flooring shall be maintained till completion of renovation work. Upon completion of the work same shall be removed without any additional cost

Monaarc Corporation Pvt Ltd

M/S. NAVEEN CONSTRUCTIONS

Eee Pee S and Co

ESVEE CONSTRUCTIONS