Execution of civil works for strengthening of existing School Infrastructure under RMSA C/o Govt. Senior Secondary School at Hobar

Amount

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out true to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable diversion pumping or bailing out and excavation shall be kept dry wherever so required by the contractor at his own cost as directed by the engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing in all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and other incidentals to complete the work as per HPPWD specification 1990 Vol.I. Any loss to the public and private property during the course of execution and disposal of unserviceable material shall be absolute responsibility of the contractor which shall have to be compensated by him in all cases.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone agreegate 40 mm (forty millimetre) nominal size) excluding the cost of form work in foundation and plinth within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 40 mm (forty millimetre) nominal size) and curing complete excluding cost of centring and shuttering in foundation and plinth within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Foundation, footings basis of columns etcetra and mass concrete including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Columns, pillars, posts and struts square rectangular or polygonal in plan within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights from floor including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra upto any thickness including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls upto all width and heights including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stair cases with sloping or stepped soffits excluding landing including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 mix design to obtained the minimum crushing strength of 20N / mm2 (Twenty newton per square millimetre) with minimum cement contente of 330 kg (three hundred thirty kilogramme) per cubic metre to give an smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in Foundation footings bases of columns and the like and mass concrete including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 mix design to obtained the minimum crushing strength of 20N /mm2 (Twenty newton per square millimetre) with minimum cement contente of 310 kg (three hundred ten kilogramme) per cubic metre to give an smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in columns Pillar post and struts and the like and mass concrete up to all floor level including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 mix design to obtained the minimum crushing strength of 20N /mm2 (Twenty newton per square millimetre) with minimum cement contente of 310 kg (three hundred ten kilogramme) per cubic metre to give an smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing, shelves and their support balconies, beams, girders, bressumers and cantilever up to all floor level including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 mix design to obtained the minimum crushing strength of 20N /mm2 (Twenty newton per square millimetre) with minimum cement contente of 310 kg (three hundred ten kilogramme) per cubic metre to give an smooth surface mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair cases except Spiral stair case including landings etcetera upto floor all levels including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4 (one cement isto two sand isto four graded stone agreegate 20 mm (twenty millimetre) nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in string courses coping bed plate, anchor block plain window sills and the like including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing thermo mechnical treated tor steel reinforcement for RCC work including bending, binding and placing in position complete with cost of binding wire including carriage of material including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Second class brick work using common brunt clay building bricks in Rate and trap bond in supersturecture above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Second class brick work using common brunt clay building bricks in supersturecture above plinth level upto floor all levels in cement mortar 1:6 (one cement isto six sand) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Half brick masonry using second class common brunt building brick in foundation and plinth in cement mortar 1:4 (one cement isto four sand) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and laying precast hydraulically compressed hollow block masonry with cement concrete blocks of size 40cm X 19cm X 20 cm (Forty centimetre into ninteen centimetre into twenty centimetre) including quoin block jamb block and clousers etcetra made of cement concrete 1:3:6 (one cement isto sand isto six graded crushed stone aggregate 20 mm (twenty millimetre) nominal size) laid with cement mortar 1:6 (one cement isto six sand) including curing complete in all floor including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 35X35X4mm (thirty five into thirty five into thirty five millimetre) thickness & mild steel flat 50x4mm (fifty into four millimetre) in combination including hinges jamb, lock jamb, beed and if required angle thrashold of mild steel angle 50X25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but thinges 2.5 mm (two decimal five millimetre) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing steel door, windows, ventilaters and clerestory windows frame manufactured from M.S. channal 75x40mm (Seventy five into forty millimetre), size vertically welded with M.S. flat 75 X 4mm (Seventy five into four millimetre) for central frames with split to end tail to each jambs including joints and miterd and welded with 16 X 3.15mm (Sixteen into three point five millimetre) lugs 10cm (ten centimetre) long embedded in cement concrete block 15cm X 10cm X 10cm (Fifteen centimetre into ten centimetre into ten centimetre) size of 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate twenty millimetre nominal size) with provision for locking arragnement and shock observor fixed with by mechanical means lugs and curing complete including applying a coat of approved steel primer after pretreatment of the surface as specified within all leads and lifts as per the direction of Engineer-in-Charge and other incidentals.

Providing and fixing factory made flush door shutters 35mm X35mm (thirty five in to thirty five millmetre) thick including black enameled M.S. butt hinges both side commercial i.e. non decorative type (phenol bonded) termite resistant and water proof core of block board construction with frames of first class hard wood and well matched first class indian teak wood commercial three ply veneering with vertical grains or cross bands and face veneering on both faces of shutter IS marked I.S. No. 2202 of kit ply / Alpro or equvalent complete in all respect including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing steel fixed shutters glazed windows and ventilators of standerd rolled steel sections ,joints mitred and welded with M.S. Channel window frame with fixing clips or with bolts and nuts as required and iron fitting including providing and fixing of glass panes with glazing clips or special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per approved architectural drawing and design including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing steel openable glazed windows and ventilators shutters of standerd rolled steel sections, joints mitred and welded with M.S. Channel window frame with fixing clips or with bolts and nuts as required and iron fittings such as hinges, tower bolts,handles, hooks and eyes complete including providing and fixing of glass panes with glazing clips or special metal sesh putty of approved make complete including applying a priming coat of red lead paint as per approved architectural drawing and design including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Providing and fixing anodized aluminium sliding door bolt pivot/steel or equivalent anodized colour and shade with bolts and nuts screws etcetera complete 300 X 16 mm (three hundred into sixteen millimetre) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) pivot / steel or equivalent anodized transparent or dyed to required shade and colour with screws etcetera complete 300 X 10 mm (three hundred into ten millimetre) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing aluminium tower bolts (barrel type) pivot/steel or equivalent anodized transparent or dyed to required shade and colour with screws etcetera complete 150 X 10 mm (one hundred fifty into ten millimetre) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing aluminium handles pivot / steel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing aluminium handles pivot / steel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 100 mm (one hundred millimetre) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing M.S. plain grills of required pattern in wooden frames of windows etcetra with M.S. Flats, square or round bars with round headed bolts and nuts or by screws including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five micron) primer coating plus back coat of polyster of 5 microns (five micron) over 5 microns (five micron) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required as including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (sixty centimetre) overall 0.60 mm (zero point six zero millimetre) thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 micron (twenty micron) over 5 microns (five microns) primer coating plus back coat of polyster of 5 microns (five microns) over 5 microns (five microns) primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet washers complete with all accesories as required including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing M.S. B.P. sheet 1.66 mm (one point six six millimetre) to 2 mm (two millimetre) thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured and paid separtely) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Steel work welded in built up section beams, joists, channel angle, tee frame work for ceiling flat with connection plates or angle cleats as in trusses and trussed purlins main and cross beams, hip and jack rafters purlins connect to common rafter and the like in building in position and applying a primer coat of red lead paint in trusses and trussed purlins in buildings including cutting, fixing, hoisting and placing in position including carriage of material within all leads and lifts and other incidentals as per the direction of the engineer-in-charge complete.

Providing and fixing 0.63 mm (zero point six three millimetre) thick corrugated G.I. sheet roofing fixed with galvanised iron J or L hooks, bolts and nuts 8mm (eight millimetre) diametre with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafters and trusses including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primming coat of red lead paint in gratings framed gaurd bars, ladders, railing, brackets and similar works including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing M.S. railing for ramp having 50 mm (fifty millimetre) dia M.S. pipe handrail slip resistant with round ends at two level at 75 cm & 90 cm (seventy five centimetre in to ninty centimetre) height and should be extend 30 cm (thirty centimetre) beyond the top and bottom of the railing with 25 mm (twenty five millimetre) dia M.S. pipe ballusters welded to 50 mm dia M.S. pipe embedded in cement concrete at 60 (sixty) centimetre centre to centre duly weldded with MS flat 50 X 5mm (fifty in to five millimetre) including and applying a coat of red lead paint complete in all respect including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Providing and fixing M.S. hollow rectangular pipe 75 mm X 25 mm (seventy five in totwenty five millimetre) handrail railing of 14 to 16 (fourteen to sixteen) gauge with flat and M.S. solid sq. bars 20mm X 20 mm (twenty in to twenty millimetre) ballusters at suitable interval duly weldded with MS flat 50 X 5 mm (fifty into five millimetre) including embedded in Cement concrete and applying a coat of red lead paint complete in all respect in verandah including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (One Cement isto six sand) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

15 mm (fifteen millimetre) thick cement plaster in single coat on rough side of brick / concrete / stone walls for interior plastering upto floor all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (One Cement isto six sand) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for exterior plastering upto floor all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:5 (One Cement isto five sand) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

6mm (six millimetre) thick cement plaster to ceiling in cement mortar 1:3 (one cement isto three sand ) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Finishing walls with water proof cement paint of approved brand of nerolac or equivalent and manufacture and of required shade on undecorated wall surface (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt, dust and remains of loose powdered materials including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Applying priming coat on new concrete / masonry / asbestos cement / palstered surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required with readymixed primer of approved brand /manufacure including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Painting two or more coats excluding priming coat on new concrete masonry /plastered surface with satin enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand papering and stopping ready mixed paint other than white required complete in all respect including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

White washing with lime on undecorated ceiling and / or slopping roofs surfaces two coats to give an even shade including thorughly brooming the surface to remove all dirt, dust, mortar dirt and other foreign matter including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Precast trezzo tiles hydraulic compresed and polished terrazzo tiles 30X30cmx25mm (thirty centimetre into thirty centimetre in to twenty five millimetre) size ISI marked I.S. 1237 of approved shade and ratio NTC or GTC or equivalent and with marbles chips of specified sizes laid in floors, treads of steps and laying on a bed of 25 mm (twenty five millimetre) average thickness of cement mortar 1:3 (one cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (Wherever required) including rubbing and polishing complete with tiles of Medium shade within all leads and lifts as per the direction of the engineer-in-charge and other incidentals.

Providing and laying white marble work in grey streaks with semi round nosing (Table rubbed and polished ) in flooring 20 mm (twenty millimetre) Thick base in cement mortar 1:3 (one cement isto three sand) including jointing with cement mortar 1:2 (one white cement isto two marble dust) with an admixure of pigment to match the shade of the marble including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Precast terrazzo chequred tiles 30X30cm (thirty centimetre into thirty centimetre) size and 20 mm (twenty millimetre) thick with marble chips of specified size laid in floors and landing on a bed of 25 mm (Twenty five millimetre) average thick cement plaster 1:6 (one cement isto sand sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (Wherever required) including rubbing and polishing complete with tiles of Medium shade including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Marble chips skirting or dado upto 30 cm (thirty centimetre) rubbed and polished to granolithic finish laid in cement marble powder mix 3:1 (Three cement isto one marble powder by weight ) in porportion of 4:7 (Four cement marble powder mix isto seven marble chips by volume) in top layer 20 mm (twenty millimetre) thick with under layer 14 mm (fourteen millimetre) thick in cement plaster 1:3 (one cement isto three sand) and top layer 6 mm (six millimetre) thick medium shade pigment with approximate 50% (fifty percent white cement and 50% (fifty percent) ordinary cement in top layer only including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushin red lead, red-oxide / zinc oxide chrome including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Painting two or more coat Nerolac or equivalent (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter With white readymixed paint including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Applying priming coat Nerolac or equivalent over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Painting two coats Nerolac or equivalent (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint white including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing under layer for plinth protection of 75 mm (seventy five millimetre) thick (unconsolidated) bed of dry brick / stone agreegate 40 mm (forty millimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing plinth protection 50 mm (fifty millimetre) thick in cement concrete 1:3:6 (one cement isto three sand isto six graded stone agreegate 20 mm (twenty millimetre) nominal size) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax,sales tax or any other taxes imposed by the Government.

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15 X 23 cm (fifteen into twenty three centimetre) in cement mortar 1:6 (one cement isto six sand) and inside plastering with cement mortar 1:3 (one cement isto three sand) including earth work and laying 10 cm (ten centimetre) cement concrete in 1:5:10 (one cement isto five sand isto ten graded stone agreegate 40 mm (foty millimetre) nominal size) and 7.5 cm (seven point five centimetre) cement concrete 1:2:4 (one cement isto two sand isto four graded stone agreegate 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing 12 mm (twelve miliimetre) thick green chalk board (non magnetic) with superior quality framing specially anodised aluminium profile 20 mm x 15 mm (twenty millimetre into fifteen millimetre) with corners of black surface shall be non porous ceremic particles on the top green surface for smooth writing with chalk over 11 mm (eleven millimetre) thick partical board which shall have backing material of galvanised sheet 0.28 mm (zero point two eight millimetre) thick and to be fixed on walls with specially designed "J "clamp and square clamps with the help of Nylon sleves and screws etcetera complete including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.

Providing and fixing on wall faces PVC (D-plast) 100mm dia (one hundred millimetre diametre) rain water pipes working pressure not less than 4.5 Kg (four point five) kilogram per square metre including filling the joints with approved adhesive complete including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing 8 mm (eight millimetre) thick cement bonded particale board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately) including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing to wall, ceiling and floor galvanised mild steel tubes (midium grade) tube fittings and clamps including making good the wall, ceiling and floor 15 mm (fifteen millimetre) nominal bore including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and laying in trenches galvanised mild steel tubes (medium grade) tube fittings (Earth work in trenches to be measured and paid for separately) 15 mm (fifteen millimetre) nominal bore including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Making connection of galvanised steel distribution branch with galvanised mild steel main 20 mm to 40 mm (twenty millimetre to forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimetre) C.P. brass of Jal / Jaguar or equivalentgratting for gully, floor or nahani trap including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing Labortory sink of vitreous china 600 x 450 x 150 mm (Six hundred into four hundred fifty into one hundred fifty millimetre) with C.I or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing C.P. brass waste of Jal / Jaguar or equivalent 40 mm (forty millimetre) dia size for sink or wash basin including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi, royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

Providing and fixing C.P. brass Jal / Jaguar or equivalent bib tap with capstan head 15 mm (fifteen millimetre) dia (heavy duty makes ISI marked IS No. 8931 & 8934 including carriage of material within all leads and lifts and as per direction of the Engineer-In-Charge and other incidentals. The rate including of octroi ,royality, Malkana, Tol Tax, sales tax or any other taxes imposed by the Government.

bikrant

ROHIT KASHYAP