Beautification and Construction of Footpath/Cycle track, storm water line, Utility services and road, decorative lights etc. Malik petrol pump to Agrasen Chowk ward-15 MC Panipat. (ROW)

Providing trench less cutting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe including supply, Delivery of HDPE pipe at work site and laying of 50mm internal diameter HDPE pipe inside road for road crossing of cable by Hydraulic Drilling Device without opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laying of cables.

Supply of street light electric meter of 8 Kw capacity three phase and providing connection of street lights with the meter, payment to contractor will made as per actual slip received from the UHBVN .

SITC of DIN Type Astronomical Digital Time Switch with 1 CO: Astronomical programmable every 1 minute, backup of 6 years , 28 memory locations, currently capacity 16 Amp, with one changover, total 28 programs, 3 nos indication lamp with 1 nos toggle switch and 1 nos timer swicth with 5 years warrenty Make: LandT/Indi Asian/CandS

P and F Contactor as per NS MNX 125 with 5 years warranty Make: Make: Indo Asian/L and T/C and S

Supply of street light electric meter of 2 Kw capacity three phase and providing connection of street lights with the meter, payment to the contractor will be made as per actual slip received from the UHBVN

Supply of mineral oxide based pigment (Iron Oxide), UV stable, alkali resistant and weatherproof, suitable for integrally coloured cement concrete, conforming to ASTM C-979, Fe As Fe203 :) 96.0 (%) Matter volation at 1050C : (1.0 (%) Water soluble salts :( 0.3 (%) Residule on 320mesh :( 0.3 (%) PH value : 3.0-7.0 Oil absorption :15-25 (g/100g) Conductivity :(400 (us/cm) Tinting stregth : :98-102 (%) complete as approved by Engineer-in-Charge.

Credit of Existing old bituminous material received after milling of BM or PC (Unit = 100 Cum after taking 80% credit of mild/scarified material ) Updated

Supply of Square cross section light column made of M.S including laser cut  design (~2150mm height M.S Laser cut) cladded with opal acrylic diffuser and  additional post top head, Black in colour, coated for high corrasion resistance,  silicon gasket, SS fastener, integral driver, GI pedestal mounting assumedly,  IP-66,  Ik=07  for  complete  light  fixture.  360-degree  light  distribution  in  the  column part provide ed with ~6W/m Vertical liner LED unit with 1X20W  LED  (4Nos.)  100lm/W  with  type-II  Luminaire  and  low  glare  indirect  line  of  vision,  efficiency  )85%.  The  vertical  laser  cut  design  to  ~2150m  in  height  above ground level, cross-section ~ 220X220mm, MS sheet thickness =3mm,  Pre-wired  with  earth  connection  integral  junction  chambers  for  cable  termination  with  four-way  32Amp  heavy  duty  connector-1  No.  SPMCB,  drivers, fastener and all accessories. Total Height of pole 3450mm.

Providing and fixing 200mm Dia and One mtr Long Red Sand Stone bollard dully fixed at site complete all respect.

5000 Watts Light Controlling Timer