Providing electric connections to Tissue Culture Laboratory for the Department of MBB B and Centre for Plant Biotechnology HT LT lines in DDUCE-OF at main campus and electric connection to block No. 1 and tube well room at RDS Seed Farm CCS HAU Hisar

Amount

S/E of moulded case circuit breaker on wall or on existing pedestal including bonding to earth and necessar connections :- {HSR 31.12(c )(ii)} (ii)100Amp to 220Amp 415V

Pipe Laying {HSR 31.21 (xxx) (a)} Supply and erection of PVC pipe of 6kg pressure laid in 1 meter below ground level complete i/c digging refilling of the trench with jointing etc. (a) PVC Pipe 120mm Dia

Earthing {HSR 31.22 (i)} (i) Earthing with GI earth pipe 4.5 mtr long and 40 mm dia with masonry enclosures on the top etc. as required.

(ii) Extra for charcoal or coke and salt for G.I plate or copper plate earth electrode. {HSR 31.22 (ii)}

(iii)Earthing with G.I. earth plate 600 mm x 600 mm x 600 mm x 6 mm thick including accessories and providing enclosures accessories and providing enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. {HSR 31.22 (iii)}

(iv)Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. {HSR 31.22 (iv)}

(v)Extra for charcoal or coke and salt for G.I plate or copper plate earth electrode. {HSR 31.22 (v)}

(x)Providing and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. {HSR 31.22 (x)}

(xi)Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia G.I pipe from earth electrode as required. {HSR 31.22 (xi)}

(xiv)Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connection etc. as required with all labour and material {HSR 31.22 (xiv)}

(xv)Pdg. and fixing 25 mm x 5 mm G.I strip on surface or in recess for connection etc. as required with all labour and material. {HSR 31.22 (xv)}

Supply and erection of under ground cable 1 metre below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches:- {HSR 31.25 (xxix)} (xxix) 95*3.5 core cable al. ar.

(xxx) 120*3.5 core cable al. ar. {HSR 31.25 (xxx)}

(xxxii) 185*3.5 core cable al. ar. {HSR 31.25 (xxxii)}

(xxxiii) 240*3.5 core cable al. Ar. {HSR 31.25 (xxxiii)}

(xxxiv) 300 sq mm 3 ½ Core cable Armoured {HSR 31.25 (xxxiv)}

(xxxv) 400 sq mm 3 ½ Core cable armoured {HSR 31.25 (xxxv)}

Supply and erection of under ground cable, loose in existing pipe or trenches complete with necessary connections:-{HSR 31.26 (xxix)} (xxix) 95*3.5 core cable al. ar.

(xxx) 120*3.5 core cable al. ar. {HSR 31.26 (xxx)}

(xxxii) 185*3.5 core cable al. ar. {HSR 31.26 (xxxii)}

(xxxiii) 240*3.5 core cable al. Ar. {HSR 31.26 (xxxiii)}

(xxxiv) 300 sq mm 3 ½ Core cable {HSR 31.26 (xxxiv)}

(xxxv )400 sq mm 3 ½ Core cable {HSR 31.26 (xxxv)}

Supply and erection of suitable compression type brass Cable glands for underground Cable:- { HSR 31.28 (iv)} (iv)70 Sq mm to 95 Sq mm cable 3 to 3 ½ Core

(v)120 Sq mm to 185 Sq mm cable 3 to 3 ½ Core {HSR 31.28 (v)}

(vii)300 Sq mm to 400 Sq mm cable 3 to 3 ½ Core {HSR 31.28 (v)}

Supply and erection of aluminium lugs Heavy duty including crimping etc. upto the entire satisfaction of the Engineer-in-charge of the work:- {HSR 31.35 (i)} (i) 95 sqmm

(h)70 sqmm {HSR 31.35 (h)}

(j)120 Sq mm {HSR 31.35 (j)}

(n)300 Sq mm {HSR 31.35 (n)}

(o)400 Sq mm {HSR 31.35 (o)}

SITC of wall / free standing floor mounting dust and vermin proof comopartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick Bkt sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted etc.( HSR 31.63)

Supplying and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect.( HSR31.64)

S/E of module case circuit breaker single pole/4 pole on wall on existing pedestal including boundaing to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the engineer-in-charge of work. {HSR 31.69 (iv)} (vi) 4 Pole MCCB 200 Amp

(vii)4 Pole MCCB 300 to 400Amp {HSR 31.69 (vii)}

(viii)4 Pole MCCB 500Amp {HSR 31.69 (viii)}

Supply band erection of XLPE (E ) 11 KV HT al. Conductor armoured cable ISI mark laid in 1 mtr below ground level with sand & bricks with all labour and material i/c digging and refilling of trench req to complete the job in all respect upto entire satisfaction of the EIC {HSR 31.70 (ii)} ii) 50sqmm 3 core XLPE Cable

Supply band erection of XLPE (E ) 11 KV HT al. Conductor armoured cable ISI mark laid in existing pipe/ trenches/surface with all labour and material i/c digging and refilling of trench req to complete the job in all respect upto entire satisfaction of the EIC {HSR 31.71(ii)} ( ii) 50sqmm 3 core XLPE Cable

Supply and erection of heat shrinkage type end termination jointing kit indoor type of suitable to accommodate 3 core 11KV XLPE aluminium cable / ABC cable complete with all the kit contents i/c earth continuing connection along with 3 nos crimping type al. lugs of suitable capacity i/c making jointing etc complete in all respect {HSR 31.72 (ii)} (ii) Suitable for 70 to 120 sqmm 3 core XLPE Cable

Supply and erection of heat shrinkage type end termination jointing kit outdoor type of suitable to accommodate 3 core 11KV XLPE aluminium cable / ABC cable complete with all the kit contents i/c earth continuing connection along with 3 nos crimping type al. lugs of suitable capacity i/c making jointing etc complete in all respect {HSR 31.73 (ii)} (ii) Suitable for 70 to 120 sqmm 3 core XLPE Cable

Laying of U/G cable 1 mtr below ground level covered with sand and bricks i/c excavation and refiling of trenches :- {HSR 31.27 (ii)} (ii) 10sqmm to 16sqmm 2 to 4 Core

Supply and erection of prestressed cement concrete pole11 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 kg.burried 2.20 m in ground.& Re reiling AB Cable & L.T Sag complwete in all respect. {HSR 31.30 ) VI (iii)}

Supply & erection of 32mm dia meter 1.5m long bracket ( B class ) making an angle of 10 to 15 degree with horizontal plane for mounting street light fitting fixing of G.I bracket on wall with 02 nos. 32mmx3mm thick M . S clamps including cost of cutting welding og G.I Pipe complete with cement , bolts and nuts etc. including necessary connections { HSR 31.30 III (xv)}

S/I/T/C of 800KVA outdoor type non sealed three phase 50Hz 11/430/250 copper wound oil imersed naturally cooled distribution transformer complete with fitting and accessories inclusive of first filling of oil and confirming IS 1180/1989 ( Part-1 ) level 2 ISI Mark with Off Load Tap Changer. latest amendments BIS specifications complete in all respect Make Jaybee/Nucon/LD/Century ( NS )

S/E of 11 KV Gang operated switch with D.O confirming to latest IS specification & amendments i/c suitable size of copper blade & erection of the same on the existing H pole with the help of channels of size 75x40x6mm ( Heavy Duty )etc.Make Isotech/Rashtriya/ Jaipuria Brothers ( NS )

S/E of fabricated M.S. channel / M.S. angle iron / M.S. flat on PCC poles 11 mtr long as per ISI specifications etc. ( NS )

S/E of nut and bolts of all sizes as per IS:1363/1966 nitch screw thread as per ISS:4218/1567. ( NS )

S/E of 11 KV disc insulator with fitting on PCC pole as per HVPNL requirment complete in all respects. ( NS )

S/E of pin insulator with 11 KV G.I. pin complete on PCC poles of approved make by HVPNL complete in all respects to the entire satisfaction of Engg-in-charge confirming to IS Part-II 1974 and IS : 2486 Part-I 1971 with 150mm threaded portion of 100 mm of GI pin to hold the insulator.( NS )

S/E of stay set complete in all respects with stay wire and disc insulator comprising of MS rod of 18mm dia 1.8 mtr long to withstand 1000Kg load etc.( NS )

S/E of lighting arrestor set for 11 KV disribution system 5 KVA sets IS : 3870/1963 ( NS )

S/E of LT fuse board with aluminium strip on Acrylic sheet ( NS )

S/E of Busbar Busduct Aluminimum 1200Amp Air Insulated with TPN 2000Amp duly seelved with heat shrinkable seelve , insulators , and 2mm thick CRCA sheet enclosures with duly powder coated with siemens grey paint complete in all respect. ( NS )

S/E of 1200Amp ACB MDO 4P 415V 50Hz micro processor based with voltage release shunt trip with channel crub 4 nos. NO+NC Aux Contact 4 Pole MDO with fully interlocked ACB with O/L , S/C and E/F protection and LED metering display and LSIG protection with control wiring and petty material require to complete the job as per specifications of EIC.Make ABB , Siemens , Schneider electric ( NS )

S/E of 1600Amp ACB MDO 4P 415V 50Hz micro processor based with voltage release shunt trip with channel crub 4 nos. NO+NC Aux Contact 4 Pole MDO with fully interlocked ACB with O/L , S/C and E/F protection and LED metering display and LSIG protection with control wiring and petty material require to complete the job as per specifications of EIC.Make ABB , Siemens , Schneider electric ( NS )

S/E of 125KVA Silent DG set model KG1-125WS Having Frequency 50Hz PF 0.8 voltage 415V 3 phase , governing class as per ISO 8528 part -V G3 , Noise level < 75 , Fuel Consumption At 100% Load is 27.4 Ltr., At 75% load is 20.2 ltr., at 50% load 15.3 Ltr , fuel tank capacity 230 ltr , weight of genset with canopy approx 2290 on wet , overall dimensions 3200*1300*1795mm , 12V electrical battery , engine : Kirloskar / Cummins Alternator :stamford/ Kirloskar make , rated output 114.7 to 156 with 6 no. cylinder bore x stroke 105*125 , rated speed 1500 lube oil sump capacity 14 coolant capacity 21 , insulation class H , alternator Efficiency 92.5 max at 100% load , max time to build up rated voltage at rated RPM < 20% with suitable size solid foundation with reinforcement & CC foundation as per standard specifications and erection with connection of cables , earthings etc and petty material required to complete the job in all respect with satisfaction of EIC. Kirloskar Green /Cummins ( NS )

S/E of DG synchronizing panel for 02 nos. 125KVA DG set , Mains with suitable capacity MCCB , FP contractors , PLC with all control relay , protection required for complete and reliable functioning of system with enclosure made out of 2mm thick CRCA sheet power coated with siemens grey paint and suitable capacity copper busbars , copper witing and all petty material required to complete the job in all respect . (NS )

Street Light Erection of 7 mtr octagonal pole with single arm bracket with LED light with connections i/c cost of RCC 1:1.5:3 for foundation size 0.7*0.7*1.8M with min. 8 nos. 12mm dia longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm CC for fixing the pole i/c the cost of labour and material required to complete the job in all respect upto entire satisfaction of EIC ( excluding Pole & foundation Bolts , bracket , light etc.) (NS )

PCC POLE Erection of prestressed cement concrete pole11 metres long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 kg.burried 2.20 m in ground.& Re reiling AB Cable & L.T Sag complwete in all respect. ( NS )

Erection of ACSR/AB Cable on 11Mtr PCC Pole complete in all respect ( NS )

S/E of Polymeric L.T Shackle Insulators complete in all respect.( NS )

Dismentalling of 11M Pcc Pole with ACSR / ABB Cable with Insulators & Iron Structure and Re realing of AB Cable and Re erect on other site complete in all respect.( NS )

Water profing of 11 Mtr Long PCC Piole with RCC on Base approx 2 foot and balance pole in ground covering with water proofing treatment layer upto ground level complete with petty material required to complete the job in all respect.( NS )

S/E of Weather proof PVC Syntex Make boxes installed on PCC Pole with clamps and having 100amp aluminium busbars 04 nos. with suitable support of insulators , nut bolts and 16*4 core al. ar. Cable for connections from pcc pole conductor to busbar box with petty material required to complete the job in all respect.( NS )

S/E OF v SHAPE Cross Arm made out of 7584086mm channel suitable for 11M Long PCC Pole with Clamp complete in all respect. ( NS )

S/E of Top Hamper made out of 50*6mm M S Flat suitable for 11M Long PCC Pole complete in all respect ( NS )

Making guarding with 8 swg GI wire on LT/HT lines including the cost of GI wire complete in all respect ( NS )

Erection only of ACSR conductor 50 sqmm on existing 11mtr PCC Pole complete in all respect. ( NS )

Supply / erection of ACSR 50sqmm complete in all respect ( NS )

S/E of Polymeric L.T Shackle Insulators complete in all respect. ( NS )

Supply / erection of ACSR 30sqmm complete in all respect ( NS )

Dismentalling of ACSR conductor 50sqmm from existing 9 mtr PCC Pole and carried to new site with erection complete in all respect ( NS )

Dismentalling of 9 mtr PCC Pole and transfer upto site store ( NS )

Erection of 100KVA/63 KVA outdoor type non sealed three phase 50hz 11/430/250 copper wound oil immersed naturally cooled distribution transformer complete with fitting and accessories complete in all respect. ( NS )

M/s P.S. Electric

Chopra Electric Company