REPAIR OF VARIOUS TYPE OF WOODEN STEEL AND TRADE PATTERN FURNITURE ITEMS AT BSO FURNITURE YARD GE AF FARIDABAD AF STATION NEW DELHI

Amount

Almirah large steel with shelves and 1/2H 1/2 S (FD-1031/1033)

M/L for removing of old U/S lock of Almirah and S/F new locks 6 lever Brass as approved complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033 Make Harison/Godrej

M/L for removing of U/S handles from almirah off sorts and S/F new CP MS handle 120 mm long as approved complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

M/L for removing U/S three way locking device and S/F new locking device assy existing size as per drg complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

M/L for removing US shelf and S/F new shelf made out of 1mm thick PBI sheet as per drg complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

M/L for carry out repairs to denting /bend shelves and fixing properly complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

M/L for removing U/S cleats from Almirah and S/F new cleats as per existing size complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

M/L for removing U/S leg from almirah and S/F new legs made out of 1.6 mm thick PBI sheet as shown on drg complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

M/L for U/S hinges from Almirah steel and S/F new hinges as per existiing size complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1031/1033

Almirah Medium steel with shelves and 1/2H 1/2 S (FD-1032/1034)

M/L for removing of old U/S lock of Almirah and S/F new locks 6 lever brass as approved complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034 Make Harison/Godrej

M/L for removing of U/S handles from almirah and S/F new CP MS handle 120 mm long as approved complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

M/L for removing U/S three way locking device and S/F new locking device assy existiting size as per drg complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

M/L for removing US shelf and S/F new shelf made out of 1mm thick PBI sheet as per drg complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

M/L for carry out repairs to denting /bend shelves and fixing properly complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

M/L for removing U/S cleats from Almirah and S/F new cleats as per existing size complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

M/L for removing U/S leg from almirah and S/F new legs made out of 1.6mm thick PBI sheet as shown on drg complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

M/L for U/S hinges from Almirah steel and S/F new hinges as per existiing size complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-1032/1034

Charpoy GI pipe 32 mm dia (FD-220)

M/L for removing of old U/S plywood from the charpoy GI 32mm and tightening the frame properly and Fixing only of plywood 12mm thick commercial BWR with appropriate nut fully threaded with washer as directed by Engr-in-Charge . Plywood 12 mm thick Commercial BWR will be provided by this office . Drg NO. FD-220

M/L for removing of old U/S torn out nylon newar from the charpoy GI 32mm and tightening the frame properly and S/F three Nos flat iron of size 40mmx5mm x 920mm long placed in between long rail in equal distance duly making of 3 Nos holes in each long rail/short rail with drill machine. S/F plywood 12mm thick commercial BWR Make: Kitply/National/ duly approved by GE/ Engr in Charge with appropriate nut fully threaded with washer complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-220

M&L for replace of U/S long rail from charpoy GI and S/F new long rail 32mm dia med grade make Bansal/Tata/Jindal as per drg complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-220

Cutting and threading of short rails of size 810 mm from broken long rail and threaded both ends as shown on drgcomplete all as specified and directed by Engineer-in-Charge.

Removing of old U/S legs from charpoy GI pipe and retrieved short rail be item No 20 be used for making legs complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-220

M&L for tightening the frame of charpoy GI, duly tightening check nut and GI elbow complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-220

M&L for removing U/S 3 way elbow and S/F 3 way GI elbow 32mm ISI mark complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-220

M&L for removing U/S check nut and S/F check nut 8mm complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-220

S/F flat iron of size 40mmx5mm x 920mm long placed in between long rail in equal distance duly making of holes in each long rail/short rail with drill machine complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-220

M&L for removing old U/S torn out nylon newar from charpoy GI 32mm and tightening the frame and supply and wooven in mat pattern with new nylon newar 50-55mm wide first cycle White colour Make Kamal/Vardhman as approved .Weight of nylon newar per charpoy not less than 1.5 Kgs complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-220

Charpoy folding IP Plytop (FD-388 (R) )

S&F 8 mm thick BWR grade commercial veneered both side of existing old charpoy folding IP ply top and including taking out old/unserviceable ply top complete all as shown on drawing, as specified and as directed by Engr-in-Charge. Drg NO. FD-388 R

Chair T/S with arms/without arm FD-75 (M)

Romoving the existing unserviceable broken seat and back from chair T/S and S/F new seat and back made out of I st class teak wood duly polished and wooven with 2mm wide 0.40mm thick plastic cane in Godrej pattern . Seat and back shall be fixed to frame with bolts and nuts (5 mm dia and 100 mm long) 04 nos each for seat and back . Handles are to be shaped as per drawing and duly polished and fixed with suitable steel screws as directed by Engr in Charge Drg NO. FD-75(M)

All as per item Ser No-5.01 Seat of char CBA tubular steel with arms complete all as specified and directed by Engineer-in-Charge.

All as per item Ser No-5.01 Back of char CBA tubular steel with arms complete all as specified and directed by Engineer-in-Charge.

All as per item Ser No-5.01 Seat of char CBA tubular steel without arms complete all as specified and directed by Engineer-in-Charge.

All as per item Ser No-5.01 Back of char CBA tubular steel without arms complete all as specified and directed by Engineer-in-Charge.

All as per item Ser No 5.01 above but Arm rest of chair CB tubular with arms complete all as specified and directed by Engineer-in-Charge.

M/L for S/F of 20mm wide 3mm thick flat MS iron strip as per required length 2 Nos each for seat duly welded complete all as specified and directed by Engineer-in-Charge. Drg NO. FD-75(M)

Chair verandah (FD-256)

Removing of existing unserviceable old cane and reweaving of chair verandah seat and back frame with 4 mm wide plastic cane in malt pattern as direted. Cane shall be of brand Sah/Premier as approved complete all as specified and directed by Engineer-in-Charge. Drg No-FD-259

M/L for fixing new hard rubber shoe to chair varandah complete all as specified and directed by Engineer-in-Charge. Drg No-FD-259

Locker Bed side steel (FD-1029)

M/L for removing of U/S 'D' type handle S/F New Alluminium 'D' type handle 100mm long as approved complete all as specified and directed by Engineer-in-Charge. Drg No-FD-1029

M/L for replacement U/S of Hasp & staple and S/F New MS 100mm Hasp & Staple as approved complete all as specified and directed by Engineer-in-Charge. Drg No-FD-1029

M/L for removing of U/S legs from locker bed side steel and S/F legs made of 1.00mm thick PBI sheet as per drg complete all as specified and directed by Engineer-in-Charge. Drg No-FD-1029

Table office clk steel (FD-1004)_

M/L for removing of old UNSV Top of table office clk steel and Fixing only of New Table top made out of 18/19mm pre laminated particle Board exterior Gde-I duly beaded with 4 mm teak wood edging as directed. 18/19mm pre laminated particle Board exterior Gde-I make : kitply will be provided to contractor under Schedule 'B' complete all as specified and directed by Engineer-in-Charge. Drg No FD- 1004

M&L for replacement of unsv drawer with new drawer made to shape and size with 1 mm thick PBI sheet including repairing the sliding surface of the drawer by smoothing the portion denting and welding or any other means to enable all the three drawers to work smoothly complete all as specified and directed by Engineer-in-Charge.

M/L for removing U/S hard rubber shoes and refix New hard rubber shoes of approved quality complete all as specified and directed by Engineer-in-Charge. Drg NoFD-1004

Table office Offr steel (FD-1006)_

M/L for removing of old UNSV Top of table office offr steel and Fixing only of New Table top made out of 18/19mm pre laminated particle Board exterior Gde-I duly beaded with 4 mm teak wood edging as directed.18/19mm pre laminated particle Board exterior Gde-I make : kitply will be provided to contractor under Schedule 'B' complete all as specified and directed by Engineer-in-Charge. Drg No FD- 1006

M&L for replacement of unsv drawer with new drawer made to shape and size with 1 mm thick PBI sheet including repairing the sliding surface of the drawer by smoothing the portion denting and welding or any other means to enable all the three drawers to work smoothly complete all as specified and directed by Engineer-in-Charge.

M/L for removing U/S hard rubber shoes and refix New hard rubber shoes of approved quality complete all as specified and directed by Engineer-in-Charge. Drg NoFD-1006

Table dining 06/08 person (FD- 30(M)/ 239/ 273)

M/L for removing of U/S Top from Table dining 6 person and duly tightening the frame and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading as per drg as directed. Drg No. 18/19mm pre laminated particle Board exterior Gde-I make : kitply will be provided to contractor under Schedule 'B' complete all as specified and directed by Engineer-in-Charge.FD-30/239

All As per item No. 10.01 but for table dining 8 person. All as per drg complete all as specified and directed by Engineer-in-Charge.. Drg No. FD-30/239

M/L for removing old broken UNSV legs to table dining 6/8 pers and S/F new legs made out of Ist class teak wood as per drg and complete all as specified and directed by Engineer-in-Charge. FD-30/239/273

M/L for removing old UNSV broken top short rail of table and S./F new short rail made out of Ist class T/W as per drg and complete all as specified and directed by Engineer-in-Charge. Drg No. FD-30/239/273

M/L for removing old UNSV top long rail of table and S/F new top long rail/ made out of I st class teak as per drg and complete all as specified and directed by Engineer-in-Charge. Drg No. FD-30/239/273

Table dining 04 person (FD- 30(M)/239/273)

M/L for removing of U/S Top from Table dining 4 person and duly tightening the frame and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading as per drg complete all as specified and directed by Engineer-in-Charge. Drg No. FD-30/239

M/L for removing old broken UNSV legs to table dining 4 pers and S/F new legs made out of Ist class teak hard wood as per drg and complete all as specified and directed by Engineer-in-Charge. FD-30/239/273

M/L for removing old UNSV broken top short rail of table and S./F new short rail made out of Ist class T/W as per drg and complete all as specified and directed by Engineer-in-Charge. Drg No. FD-30/239/273

M/L for removing old UNSV top long rail of table and S/F new top long rail/ made out of I st class teak as per drg and complete all as specified and directed by Engineer-in-Charge. Drg No. FD-30/239/273

Table 3'x3' (900 x 900 x 760 mm) FD-1009

M/L for removing of U/S Top from Table and duly tightening the frame and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading as per drg complete all as specified and directed by Engineer-in-Charge. Drg No FD- 1009

Table 3'x2' with or without drawer (900 x 600 x 760 mm) FD-283/284

M/L for removing of U/S Top from Table and duly tightening the frame and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading as per drg complete all as specified and directed by Engineer-in-Charge. Drg No. FD-283/284

M/L for removing of U/S Top long rail from Table and duly tightening the frame and S&F new top long rail of table made out of I st class teak complete all as specified and directed by Engineer-in-Charge. drg No. FD-283/284

M/L for removing of U/S Top short rail from Table and duly tightening the frame and S&F new top short rail of table writing made out of I st class teak complete all as specified and directed by Engineer-in-Charge. drg No. FD-283/284

M/L for removing of U/S leg from Table and duly tightening the frame and S&F new leg of table made out of I st class teak complete all as specified and directed by Engineer-in-Charge. drg No. FD-283/284

M/L for removing of U/S Top from Table 3'x2' steel and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading as per drg complete all as specified and directed by Engineer-in-Charge.

Table Centre FD-274

M/L for removing of U/S Top from Table and duly tightening the frame and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading as per drg complete all as specified and directed by Engineer-in-Charge. Drg No. FD-274

M/L for removing of U/S /broken glass Top from Table and duly tightening the frame and S/F new top made out of 12mm thick toughned glass top as per drg complete all as specified and directed by Engineer-in-Charge. Drg No. FD-274

Table Peg FD-277

M/L for removing of U/S Top from Table and duly tightening the frame and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading complete all as specified and directed by Engineer-in-Charge. drg No. FD-277

M/L for removing of U/S /broken glass Top from Table and duly tightening the frame and S/F new top made out of 12mm thick toughned glass top complete all as specified and directed by Engineer-in-Charge. drg as directed. Drg No. FD-274

All as per ser No 15.01 above but front top rail/side top rail /stiffner and leg of ist class teak wood complete all as specified and directed by Engineer-in-Charge.

Teapoy FD-278

M/L for removing of U/S Top from Table and duly tightening the frame and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading complete all as specified and directed by Engineer-in-Charge. as per drg No- FD-278

Table writing FD-275

M/L for removing of U/S Top from Table writing duly tightening the frame and S/F new top made out of 18/19mm prelaminated particle board exterior Gde duly beaded with 18/19mmx4mm thick T/W beading complete all as specified and directed by Engineer-in-Charge as per drg No. FD-275

S&F in replacement of new leg of table writing made out of I st class teak wood complete all as specified and directed by Engineer-in-Charge as per drg No. FD-275

S&F in replacement of new top long rail of table writing made out of I st class teak wood complete all as specified and directed by Engineer-in-Charge as per drg No. FD-275

S&F in replacement of new top short rail of table writing made out of I st class teak wood complete all as specified and directed by Engineer-in-Charge as per drg No. FD-275

S&F in replacement of new stifner of table writing made out of I st class teak complete all as specified and directed by Engineer-in-Charge as per drg No. FD-275

Chair revolving High Back (TP)

M/L for taking down of UNSV hydraulic system of chair revolving H/B , repair the same and refixing properly in working condition complete all as specified and directed by Engineer-in-Charge. Drg No - TP

M/L for removing UNSV tapestry cloth form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with tapestry cloth in original size and shape. Cloth shall be not less than Rs 220/- Per Rm as approved by GE/Engr in Charge Drg No. FD/ TP

All as per ser item No 18.02 above but for back of chair complete all as specified and directed by Engineer-in-Charge.. Drg No TP

M/L for removing old caster wheel from chair and S/F new coaster wheel best quality as approved complete all as specified and directed by Engineer-in-Charge. Drg No TP

M/L for removing U/S PVC moulded base assy and S/F new PVC moulded base Assy duly fitted with 5 Nos caster wheel as per existing shape and size complete all as specified and directed by Engineer-in-Charge. Drg No TP

M/L for removing of old U/S handle and S/F new handlewith soft top fixed Arms as per existing shape complete all as specified and directed by Engineer-in-Charge. Drg No TP

Chair revolving Low Back (TP)

M/L for taking down of UNSV hydraulic system of chair revolving H/B , repair the same and refixing properly in working condition complete all as specified and directed by Engineer-in-Charge. Drg No - TP

M/L for removing UNSV rusty tapestry cloth form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with tapestry cloth in original size and shape. Cloth shall be not less than Rs 220/- Per Rm as approved by GE/Engr in Charge Drg No. TP

All as per ser item No 19.02 above but for back of chair complete all as specified and directed by Engineer-in-Charge. Drg No. TP

M/L for removing UNSV leatherite tapestry cloth, form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with leatherite tapestry cloth in original size and shape. Cloth shall be not less than Rs 400/- Per Rm as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

All as per ser item No 19.04 above but for back of chair complete all as specified and directed by Engineer-in-Charge. Drg No. TP

M/L for removing old caster wheel from chair and S/F new coaster wheel best quality as approved complete all as specified and directed by Engineer-in-Charge. Drg No. TP

M/L for replacement of PVC moulded base Assy duly fitted with 5 Nos caster wheel as per existing shape and size complete all as specified and directed by Engineer-in-Charge. Drg No. TP

M/Lfor removing of old U/S handle and S/F new soft top fixed Arms as per existing shape complete all as specified and directed by Engineer-in-Charge. Drg No. TP

Chair computer

M/L for taking down of UNSV hydraulic system of chair revolving H/B , repair the same and refixing properly in working condition complete all as specified and directed by Engineer-in-Charge. Drg No - TP

M/L for removing old UNSV rusty tapestry cloth form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with tapestry cloth in original size and shape. Cloth shall be not less than Rs 400/- Per Rm as approved by GE/Engr in Charge . Drg No. TP

All as per item No 20.02 above but for back of chair complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/L for removing old caster wheel from chair and S/F new coaster wheel best quality as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/L for replacement of PVC moulded base Assy duly fitted with 5 Nos caster wheel as per existing shape and size complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/Lfor removing of old U/S handle and S/F new soft top fixed Arms as per existing shape complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

Chair revolving chief excecutive

M/L for taking down of old UNSV Pneumatic system of chair revolving H/B , repair the same and refixing properly in working condition complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/L for removing UNSV leatherite tapestry cloth, form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with leatherite tapestry cloth in original size and shape. Cloth shall be not less than Rs 220/- Per Rm as approved complete all as specified and directed by Engineer-in-Charge.. Drg No. FD- TP

All as per ser item No 21.02 above but for back of chair complete all as specified and directed by Engineer-in-Charge.Drg No. FD- TP

M/L for removing old caster wheel from chair and S/F new caster wheel best quality as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/L for replacement of PVC moulded base Assy duly fitted with 5 Nos caster wheel as per existing shape and size complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/Lfor removing of old U/S arms rest and S/F new soft top fixed Arms as per existing shape complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/L for reomoving dust and dry cleaning to chair Rev H/B,L/B,Visitor, Computer complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

Chair Visitor

M/L for removing of old UNSV seat and back of chair visitor and removing all rust/dust,old paint from steel surface with cleaning material apply two coat black paint SE complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

M/L for removing UNSV rusty tapestry cloth form and plywood from seat of chair and S/F new 50mmx40 density foam ,seat ,ply and covered with tapestry cloth in original size and shape. Cloth shall be not less than Rs 220/- Per RM as approved by GE / Engr in Charge Drg No. FD- TP

All as per ser item No 22.02 above but for back of chair complete all as specified and directed by Engineer-in-Charge. Drg No. FD- TP

Chair dining FD-279

M/L for removing U/S wooden back rest stiffner of chair Dining and S/F new back rest made of Ist class T/W as per drg complete all as specified and directed by Engineer-in-Charge. Drg No. FD- 279

M/L for removing old UNSV broken bottom stiffner from chair dining and S/F new stiffner made out of Ist class T/W as per drg complete all as specified and directed by Engineer-in-Charge. Drg No. FD- 279

M/L for removing U/S broken front legs from chair dining and S/F new front legs made to shape , the timber shall be Ist class T/W as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- 279

M/L for removing U/S broken rear legs from chair dining and S/F rear legs made to shape as the timber shall be Ist class T/W as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- 279

Removing of U/S cane from chair dining, tightening the wooden frame properly and recanning of chair with new plastic cane white 2 mm wide and 0.4 mm thick and perimeter wooven with 3mm cane as per Godrej pettern. The cane shall be made up to Sah/Premier brand as approved by GE/Engr in Charge Drg No. FD-279

M&L for removal of old existing unsv cane and S&F of new seat made of foam cushion 4" thick 40 density covered with supirior quality tapestry cloth as approved , fixed with removable 12mm thick BWR grade commercial ply wood as specified in drg and all as specified and directed by Engr-in-charge.

Chair Easy FD-229

M/L for removing U/S broken front legs from chair easy and S/F new front legs made to shape , the timber shall be Ist class T/W as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- 229

M/L for removing U/S broken rear legs from chair easy and S/F rear legs made to shape as the timber shall be Ist class T/W as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- 229

M/L for removing U/S broken Arm rest from chair easy and S/F new arm rest made to shape as the timber shall be Ist class T/W as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- 229

Removing of U/S cane from chair easy (Seat and back) , tightening the wooden frame properly and recanning of chair with new plastic cane white 2 mm wide and 0.4 mm thick and perimeter wooven with 4mm cane as per Godrej pettern. The cane shall be made up to Sah/Premier brand as approved by GE/Engr in Charge Drg No. FD-229

Sofa set five seater with FRC (FD-281)

M/L for removing U/S foam cushion torn out tapestry cloth from sofa set five seater and S/F new foam cushion 530x500x100mm thick 32 density make Kurlon/Sleep well/ duly covered tapestry cloth as approved complete all as per drawing complete all as specified and directed by Engineer-in-Charge. (Rate of tapestry cloth not less than Rs 220/-Per RM). Drg No. FD- 281

Sofa chair single seater

M/L for removing old foam cushion torn out tapestry cloth from sofa chair single seater( seat and back) and S/F new foam cushion 530x500x100mm thick 40 density foam make Kurlon/Sleep well/ chentury duly covered with tapestry cloth as approved complete all as specified and directed by Engineer-in-Charge. (Rate of tapestry cloth not less than Rs 220/-Per Rm). Drg No. FD- 281

Bed wood ply top FD-246/247

M/L for removing U/S plywood from bed plywood top and tightening frame and S/F new plywood 6'x3'x12mm thick commercial plywood BWR Make: Kit ply/National/Eco Ply as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD- 246/247

M/L for removing U/S head board complete of Bed ply wood top and new head board S/F as shown on drg complete all as specified and directed by Engineer-in-Charge. Drg No. FD- - 246/247

M/L for removing U/S foot board complete of Bed ply wood top and New foot board S/F as shown on drg complete all as specified and directed by Engineer-in-Charge. Drg No. FD- - 246/247

Removing unserviceable long rails and supply and fixing new rail as shown on drg complete all as specified and directed by Engineer-in-Charge.

Table dressing ladies with mirror ( FD-251)

M/L for removing of old U/S ply from back side of mirror of Table dressing ladies and S/F new ply wood 6mm commercial grade as per drg as approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD-251

M/L for removing of old U/S mirror and S/F new mirror shall be 5mm thick ,Make Modi Guard/King fisher/Atul as per drg specification complete all as specified and directed by Engineer-in-Charge. Drg No. FD-251

M/L for removing of old/U/S knobs and S/F new fancy type knob of 25mm dia to the drawer of table dressing ladies as approved by Engr in charge Drg No. FD-251

Table dressing Gents with mirror (FD-230)

Dismantling of of old existing unserviceable top of table dressing and S&F of new top shall be made out of 12 mm thick pre laminated particle board as specified and shown in drg complete all as specified and directed by Engineer-in-Charge.

M/L for removing of old U/S ply from back side of mirror of Table dressing gents and S/F new ply wood 6mm commercial grade as per drg.approved complete all as specified and directed by Engineer-in-Charge. Drg No. FD-230

M/L for removing of old U/S mirror and S/F new mirror shall be 5mm thick ,Make Modi Guard/King fisher/Atul as per drg complete all as specified and directed by Engineer-in-Charge. Drg No. FD-230

M/L for removing of old/U/S knobs and S/F new fancy type knob of 25mm dia to the drawer of table dressing gents complete all as specified and directed by Engineer-in-Charge. Drg No. FD-230

Charpoy tubular steel frame with plytop for JCOs/ Ors

M/L for removing of old U/S plytop the charpoy and S/F plywood 12mm thick commercial BWR Make: Kitply/National/ duly approved by GE/ Engr in Charge with appropriate nut & bolt fully threaded with washer complete all as specified and directed by Engineer-in-Charge.

M/L for removing U/S hard rubber shoes and refix New PVC hard rubber shoes of approved quality as per Drg No and approved by Engr in charge

Chair School with hand rest

M/L for removing of U/S pvc Seat from chair and S/F new pvc seat for the chair as specified and directed by Engr-in-Charge.

M/L for removing of U/S pvc hand rest from chair and S/F new pvc hand rest for the chair as specified and directed by Engr-in-Charge.

Table Computer

Removing of old existing unsv top from Table computer and supply and fixing the new top of same size made out of 18/19mm thick exterior grade particle board duly post-formed all as shown on drawing and complete all as specified and directed by Engineer-in-Charge.

Removing of old existing unsv bottom from Table computer and supply and fixing the new bottom of same size made out of 18/19mm thick exterior grade pre-laminated particle board with allround PVC edging all as shown on drawing and complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 32.02 here-in-before but vertical board on side of Table computer complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 32.02 here-in-before but keyboard tray of Table computer complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 32.02 here-in-before but drawer of Table computer complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 32.02 here-in-before but pull out mouse tray of Table computer complete all as specified and directed by Engineer-in-Charge.

Removing of old existing unsv telescopic channel of key board tray and supply and fixing new Mild Steel (CRC) with Zink Coating telscopic channel 350mm size to Table computer as directed by Engineer-in-Charge.

Removing of old existing unsv telescopic channel of mouse tray/ drawer and supply and fixing new Mild Steel (CRC) with Zink Coating telscopic channel of 300mm to Table computer as directed by Engineer-in-Charge.

S&F new Nylon buffers to Table computer all as shown on drawing and complete all as specified and directed by Engineer-in-Charge.

S&F new knobs to Table computer all as shown on drawing and complete all as specified and directed by Engineer-in-Charge.

Table Bed Side (FD 276)

Removing of old existing unsv top from table bed side and S&F the new new top of same size made out of 18/19 mm thick exterior grade pre-laminated particle board,teak faced,ISI marked all as shown on drawing and complete all as specified and directed by Engineer-in-Charge.

All as per srl item No 33.01 here-in-before but side of table bed side complete all as specified and directed by Engineer-in-Charge.

Removing of old existing unsv shelves from table from table bed side and S&F the new shelf made out of 12mm thick exterior grade pre-laminated particle board teak faced of same size all as shown in darwing and complete all as specified and directed by Engineer-in-Charge.

Removing of old existing unsv back ply from table bed side and S&F the new back ply of same size of 06mm thick commercical plywood (ISI marked) all as shown in drawing including one coat of french polish complete all as specified and directed by Engineer-in-Charge.

BED HARD STEEL (FD/E6/MAP/08 ®

Removing of old and unserviceable Plytop from Bed Hard and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR phenol bonded commercial plywood of unpolished edging of approved quality complete all as shown on drawing and complete all as specified and directed by Engineer-in-Charge.

Removing of old unserviceable head board from Bed Hard and S&F new head board made of 18 mm thick prelaminated particle board both side teak faced having 04 mm thick teak wood beading all around. All as per size and design shown on drawing and complete all as specified and directed by Engineer-in-Charge.

All as per Sr.item No. 34.02 here-in-before but foot board of Bed hard complete all as specified and directed by Engineer-in-Charge.

S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel all as shown on drg complete all as specified and directed by Engineer-in-Charge.

Spot welding

Spot welding to steel furniture at site complete all as specified and directed by Engineer-in-Charge.

Polishing of the wooden furniture prepare the existing surface of wooden furniture of any description by applying sand paper removing the stains and filling the bore holes , cracks by putting fevicol and wooden putty etc and apply two coat of french spirit Polish to the exposed surface polishing shall be uniform and shall be glossy finish for the following items :-

Table dining 8 person FD-30

Table 3'x2' with or without dwr Drg No. FD-283

Table Peg Drg No. FD-277

Table dining 6 persons Drg No. FD-273

Table centre Drg No. FD-274

Table writing Drg No. FD-275

Teapoy wooden Drg No. FD-276

Chair dining Drg No. FD- 262

Chair easy

chair writing Drg No. FD- 280

Sofa five Seater (3+1+1)

Sofa single seater Drg No. FD- 281

Bed plytop Drg No. FD- 246/247

Table dressing ladies Drg No. FD-251

Table dressing gents Drg No. FD-230

Table bed side

Table Dining 4 pers

Preparing the old painted surfaces by sand papering deserting removing dents and bents and filling with putty (metal paste) painting with synthetic enamel paints one coat (external and internal) to give glossy finish as per approved colour as directed by Engr in Charge for the following items :-

Almirah large steel

Almirah Med steel

Table office clk steel

Table office offr steel

Chair Tub steel with arms

Chair Tub steel with out arms

Chair Verandah

Rack adj steel 4 tier with side back covered

Rack adj steel 4 tier with side covered

locker bed side steel

Table 3' x2' w/dr Steel

Rack side steel 3 spaces

Book Shelf Large Steel

Filing Cabinet

Locker steel 12/18 Locker(78"x36"x19")

Shoe rack Steel

Chair school with hand rest

Table 3'x3' steel

table computer

Charpoy IP folding

Bed Hard Map

Charpoy tubular steel frame with plytop for JCOs/ Ors

MAHABIR SINGH

SMS Enterprises

M/S CHANDER SHEKHAR