GE(S) BTD 07 OF 2020-21 SPL REPAIR OF SEWAGE DRAIN AND NTERLOCKING TILES OF OPEN AREA SURROUNDING COOK HOUSE BUILDING NO P-9 SPECIAL REPAIR OF 80 X BLDG LIGHTS (SECURITY LIGHTS) OF SPL VEH GARAGE OF FD SUB GP CONSTRUCTION OF 450 MTRS RAIN DRAIN WITH

Amount

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and removal from site complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and refixing in the same opening etc complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each complete all as specified and as directed.

Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.

Demolition of cement concrete (unreinforced) including tiles of any description & terrazo finish, etc. not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position complete all as specified and as directed .

M & L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed

M & L for solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed

S & F 2mm thick Linoleum, plain coloured, laid and sealed down with an approved adhesive in dry floors including stretching, cutting and fitting complete all as specified and directed

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering,and removing surplus spoil to a distance not exceeding 50m and making good surface all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/losse soil complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and exceeding 1.5 m depth but not exceeding 3.0 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/losse soil complete all as specified and directed.

Excavation over areas, not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over areas, exceeding 1.5 m deep and not exceeding 3.0 m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over areas, exceeding 3.0 m deep and not exceeding 4.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation over areas, exceeding 4.5 m deep and not exceeding 6.0 m deep and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, approved soft/loose soil, including spreading , levelling, watering and well ramming in layers, each layer not exceeding 25cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Material and Labour for hard core of broken stone or boulders of gauge exceeding 63mm but not exceeding 100mm, deposited, spread, and levelled in layers not exceeding 15cm thick, watered and rolled/rammed to a true surface using broken bricks complete all as specified and as directed.

Material and labour for hard core of broken bricks of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified & directed.

Material and labour for cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and sub base in floors etc complete all as specified and as directed.

Material and labour for cement concrete (1:3:6), type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete and sub base in floors as in boundary pillars and posts including caps and bases and as in packing under and haunching against the sides of drain pipes after they are laid and tested etc complete all as specified and as directed.

Material and Labour for PCC 1:2:4 type B-2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.

Material and Labour for PCC 1:3:6 type C-1 using 20mm graded aggregate as in surface channels and drains complete all as specified and directed.

Material and Labour for precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in kerb stone, manhole covers, kitchen sink slab etc with plain fair faces including chamfers, atherings,throating etc. and setting in mortar set in cement mortar (1:4) complete all as specified and as directed.

Material and labour for cement concrete (1:2:4) type B-1, using 20 mm graded stone aggregates as in bedding, benching of manholes, coping, surface channel, roof kerbs or mud stops, rounded or chamfered on edges etc including necessary form work complete all as specified and as directed.

Material and labour for brick work with fly ash old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:4 complete all as specified and directed.

Material and labour for brick work with fly ash old size bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with fly ash old size bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4), etc; complete all as specified and directed.

M&L for brick work with fly ash old size bricks in brick on edge walls (less then ½ brick thick) built in CM (1:6) complete all as specified and directed.

M&L for brick work with fly ash old size bricks, in one brick thick hone comb built in CM (1:4), etc; complete all as specified and directed.

Material and labour for 40 mm thick damp proof courses (DPC) in cement concrete (1:2:4) type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Supply only intergral water proofing compound complete all as specified and directed.

Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering in CM (1:6) on other then fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specified and directed.

Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

S&F MS work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets ( for securing wire mesh) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

Supply and fixing galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Supply only chain link MS galvanisd fencing of mesh size 50mmx50mm or 100mmx100mm and dia of wire not less than 3mm complete all as specified and directed. Note:- The weight of the chain link fencing shall be measured and approved by BOO ordered by the Accepting Officer.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. Note:- Round steel bars and steel screw bolts shall be measured and paid separately as supply only in the appropriate item of BOQ.

Supply only round mild steel bars 10mm dia and over complete all as specified and directed.

Supply only steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeeding 10cm long and dia of shank 16 to 20mm complete all as specified and directed.

Supply and fixing mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm but not exceeeding 10cm long and dia of shank 5 to 10mm complete all as specified and directed.

Supply and fixing Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.45mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. Make:- M/s Lloyd Insulation(India) Ltd/M/s TATA blue scope / M/s JSW Ispat Ltd

Material and Labour for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Supply and fixing mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 (Gde-E- 165) complete all as specified and as directed.

Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome complete all as specified and directed.

Material and Labour for formwork to rough finish surface of flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Material and labour for formwork to soffits of suspended slabs such as roof slab, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) for rough finished surfaces of concrete complete all as specified and as directed.

Material and Labour for formwork to (rough finished surface of concrete) edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exceeding 5cm but not exceeding 10cm wide complete all as specified and as directed.

Material and Labour for formwork to (rough finished surface of concrete) edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide complete all as specified and as directed.

Material and labour for RCC M-25 (design mix) using 20 mm graded stone aggregates as in beams, cantilevers, bressummers, lintels over 1.5 m span and the like etc complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for RCC M-25 design mix using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like and in chajja etc complete all as specified and as directed. (NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs complete all as specified and as directed. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Material and labour for mild steel TMT bars 6 to 8mm dia cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs complete all as specified and as directed. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

All as per item No 58 here in before but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders etc. complete all as specified and as directed.

S & F MS rungs of 20mm dia bar etc complete all as specified and directed.

Material and Labour for continuous brick edging with burnt clay of subclass brick 'B' with width equal to the length of the brick laid dry on end vertically including excavation complete all as specified and as directed.

Cutting out concrete blocks, slabs, brickwork or stone masonry (in alternate course), forming toothings for and bonding new work in mortar into old work, including new materials entering old wall set in CM 1:6 etc complete all as specified and directed.

Material and labour for loose filling with broken bricks of sub class B old size of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed .

Material and labour for flush pointing in Cement mortar 1:3 including racking out joints / pointing to brick wall etc complete all as specified and directed.

Material and labour for flush pointing to brick on edge pavings in Cement mortar 1:3 complete all as specified and directed.

Material and labour for flush pointing to brick laid flat or brick tiles in Cement mortar 1:3 complete all as specified and directed.

M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of suitable primer complete all as per manufacturer instructions and all as specified and directred.

Material and labour for preparation of old plastered surfaces on wall and applying one coats of oil bound distemper complete all as specified and as directed.

Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.

Material and labour three coats of white wash on newly plastered surface of wall including preparation the surface of on walls complete all as specified and directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and as directed.

Material and labour for complete removal of of existing treatment on ceiling (any number of layers) by scraping with steel wire brushes or any other means, and applying two coats of white wash complete all as specified and as directed.

Material and labour for complete removal of existing treatment on wall (any number of layers) by scraping with steel wire brushes or any other means, and applying two coats of white wash complete all as specified and as directed.

Material and labour for 25 mm thick cement concrete (1:2:4), type B-2 using 20 mm graded stone aggregate as in sub base of floor complete all as specified and as directed.

Material and labour for 75 mm thick cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base of floor, under tiles etc. complete all as specified and as directed.

Material and labour for 50mm thick PCC (1:2:4), type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and as directed.

Extra for forming fair finished drain or channel not exceeding 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed .

Material and labour for 75mm thick PCC (1:2:4), type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 100mm thick PCC (1:2:4), type B-1 using 20 mm graded stone aggregate as in floor finished even and smooth without using extra cement laid in alternate panels complete all as specified and as directed.

Material and labour for 150mm thick PCC (1:2:4), type B-2 using 40 mm graded stone aggregate as in floor finished even and smooth without using extra cement laid in alternate panels complete all as specified and as directed.

Material and Labour for finishing surface of concrete pavement by brooming making rough impressions on the top surface complete as specified and as directed.

Material and labour 75mm thick, cement concrete 1:3:6, type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, paths, etc and finishing top surfaces even and smooth without using extra cement complete all as specified and directed.

Dismantling water tanks exceeding 250 litre and not exceeding 500 ltr capacity complete all as specified and as directed.

Supply and fixing in repair three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.

Supply and fixing three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.

Supply and fixing ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.

Supply and fixing in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed.

Supply and fixing 15mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .

Supply and fixing 20mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .

Supply and fixing 25mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed .

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection including cleaning for refixing or removal complete all as specified and directed.

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed .

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed .

Supply and fixing GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and directed .

Supply and fixing bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore dia of pipe complete all as specified and as directed .

S & F in repairs 15mm bore fancy type chromium plated brass bib tap long body, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make :- JAQUAR/ KOHLER/ GROHE).

Supply and fixing stop valve for 15 mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed . (Make :- JAQUAR/ KOHLER/ GROHE).

S&F in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule complete all as specified and directed . (Make :- JAQUAR/ KOHLER/ GROHE).

Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed . (Make :- JAQUAR/ KOHLER/ GROHE).

Supply and fixing concealed stop cock exposed part kit & flush cock with fitting sleeve, operating lever & adjustable wall flange with seal, chromium plated 15mm dia complete all as specified and directed. Make:- Jaquar Cat part No. DRC-37083K

S&F in repairs PVC waste pipe with socket suitable for connection to Waste fittings of 32/40mm dia, and of length minimum 75 cm complete all as specified and directed.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white with CI 'P' or 'S' trap, in and including water closet seat cover of plastic , jet spray etc. complete including necessary PVC pipe fitting to make the seat fully functional complete all as specified and as directed.

S&F in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed. (Make:- CERA/ HINDWARE/ PARRYWARE).

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed. (Make:- CERA/ HINDWARE/ PARRYWARE).

S&F PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed. (Make:- CERA/ HINDWARE/ PARRYWARE).

S&F in repair vitreous china bowl Urinal, flat back type 465 mm x 355mm x 265mm, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and pointing around urinal back in cement, grating and union for discharge etc. complete all as specified and directed .

S & F for vitreous china urinal, half stall type, white excluding flushing cistern but including flush pipe, and waste pipeand also including connections to flushing pipe and outpipes, bedding urinal against wall in cement mortar (1:2), securing urinal to plug with and including 60 mm long brass screws, pointing arount urinal back in cement complete all as specified and directed .

S & F urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified and directed.

Supply and fixing vitreous china urinal, without sensor with fixing accessories set of size 480x300x740mm full stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement moter 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets flushing cistren with brackets flush pipe grating and union for discharge pipe including fixing of supply pipe flushing cistern trap and waste pipe complete all as specified and directed .Make:- Jaquar Cat part No. URS-WHT-13255 or any other equivalent make.

Supply and fixing rectangular shaped chrome finished urinal partition with 10mm thick frosted glass of size 900mm heght and 450mm width complete all as specified and directed. Make:- Jaquar Cat part No. 1810-US/1810-UC, JSE-CHR-110US450X.

Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including cast iron cartilever bracket 32 mm dia brass waste coupling and including fixing of waste fitting and union complete all as specified and as directed . (Make:- CERA/ HINDWARE/ PARRYWARE/ JAQUAR/ GROHE/ KOHLER).

Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 630 x 450 mm including cast iron cartilever bracket and 32 mm dia brass waste coupling and including fixing waste fitting and union complete all as specified and as directed .(Make:- CERA/ HINDWARE/ PARRYWARE/ JAQUAR/ GROHE/ KOHLER).

Supply and fixing 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. (Make :- JAQUAR/ KOHLER/ GROHE).

Supply and fixing in repair 15mm bore, brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed .(Make :- JAQUAR/ KOHLER/ GROHE).

Supply and fixing in repair 15mm bore, fancy type, chromium plated, angle cock, cast copper alloy, screwed down, screwed for iron pipe complete all as specified and as directed.(Make :- JAQUAR/ KOHLER/ GROHE).

Supply and fixing in repair brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union, complete all as specified and as directed . (Make :- JAQUAR/ KOHLER/ GROHE).

Supply and fixing in repair health faucet brass body with wall hook and 1 mtr SS pipe complete all as specified and as directed .

S & F PVC connections 15 mm bore, 450 mm length, heavy duty, with PTMT nuts complete all as specified and as directed.

S & F in repair PVC connection 15 mm size with brass nuts on both ends and washers length 600mm of approved quality complete all as specified and directed.

S&F 32mm bore of pipe low density (LDPE) of pressure rating 6 Kg/cm2 fixed to wall or floor etc including fittings complete all as specified and directed .

Supply and fixing tubular towel rail brass chromium plated 20 mm dia ‘D’ type 60 cm long including end brackets complete all as specified and as directed.

S & F towel rail 600mm long of PTMT having minimum weight 170 gm fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Supply and fixing chromium plated towel ring complete all as specified and directed .

Supply and fixing in repair Toilet paper holder recessed type stainless steel complete all as specified and directed .

Supply and fixing in repair stainless steel, Chromium plated, decorative type, soap dish holder of approximate size 160 x 160 x 90 mm fixed to wall with Chromium plated brass screwes including plastic gutties complete all as specified and directed .

Supply and fixing towel rack 600mm long with lower hanger complete all as specified and as directed . Make:- Jaquar/ CERA

Supply and fixing CP brass corner glass shelf (25cm/30cm) with CP brass brackets and railing etc complete jointed in cement mortar complete all as specified and directed .

Supply and fixing peg set/coat hooks (set of 4/5), stainless steel, complete all as specified and as directed .

S &F PTMT mirror cabinet of size 380x450mm best quality confirming to sample kept in AGE's office, complete all as specified and directed . Make : Pryag or equivalent

S & F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and directed .

S&F in repair stainless steel plate racks of size 900x600x250mm and thickness of SS strip of 1mm fixed wall etc. complete all as specified and directed .

S & F cast iron sand soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.

S & F cast iron sand soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints laid in trenches/floors or fixed in walls complete all as specified and directed.

S & F 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S & F 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.

S & F 100mm bore cast iron cowl fixed with cement joint in (1:2) cement mortar complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specifed and directed.

Supply and fixing 75 mm bore PVC (SWR) bend/tee any type complete all as specifed and directed.

Supply and fixing 75 mm bore PVC (SWR) vent cowl any type complete all as specifed and directed.

Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) bend/tee any type complete all as specied and directed.

Supply and fixing 110 mm bore PVC (SWR) vent cowl any type complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes single socketed, ISI marked, in any length with rubber ring joints, fixed to walls with and including standard PVC clamps and embeded in PCC block including taking down old rain water pipe and eaves gutter of any type/pattern including all accessories omplete all as specified and directed.

Supply and fixing cast iron floor trap, 100mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed.

Supply and fixing in repair cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed.

S & F brass chromium plated bottle traps for wash basins with inlet and out let screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.

Supply and fixing 100 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing 75 mm dia PVC (SWR) floor trap, plain with stainless steel grating including jointing with solvent cement complete all as specified and directed .

Material and labour for Salt-glazed stoneware gully traps of size 150x150mm, square or round mouthed, type 'S' complete all as specified and as directed.

Material and labour for 600mm dia reinforced conncrete pipes, class NP2 laid and jointed complete with collars complete all as specified and as directed. Note :- (i) The qouted rate include for all necessary extra joints, waste and cutting etc. (ii) Excavation and earth work shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing Salt-glazed stoneware drain pipes 100mm bore (internal) of grade 'A' laid in trenches and jointed etc. complete all as specified and directed .

Supply and fixing Salt-glazed stoneware drain pipes 150mm bore (internal) of grade 'A' laid in trenches and jointed etc. complete all as specified and directed .

Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of (SGSW) drain pipes of 100 mm dia( internal), laid to required slope including packing under and haunching against the sides of pipes after these are laid and tested complete all as specified and as directed . Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be equal to outer dia of drain pipes (not of sockets / collar)

Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in concrete bed of (SGSW) drain pipes of 150 mm dia( internal), laid to required slope including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed . Note :- (i) Thickness of concrete bed below the barrel of pipe shall be 10 cm. (ii) Width of concrete bed shall be equal to outer dia of drain pipes (not of sockets / collar)

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .

Supply and fixing powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified complete all as specified and directed .

S & F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed .

S & F door shutter for X-ray room comprising 19mm thick plywood on both faces and 2mm thick lead sheet sandwitched in between both plywoods fixed with screws including 4 No purpose made 'T' hinges one flap 150mm log and other flap 300mm long which will be fixed on door shutter with nut and bolts 4-5mm dia/riveted including 2 No handles, 1No sliding bolt, 2 No tower bolts etc as per manufacturer's instruction complete all as specified and directed.

S & F radiation protection glass equivalent to 0.5mm lead/lead glass of size 250mm x300mm omplete all as specified and directed.

S & F 9mm thick plywood, grade BWR, type BB, fixed with screws to wooden chowkhat/lead sheet with screws or as per manufacturer's instruction complete all as specified and directed.

SF 2mm thick lead sheet fixed to wooden chowkhat with screws or as per manufacturer's instructions complete all as specified and directed.

S &F in repair aluminium body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed complete all as specified and directed .

S & F in repair block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber framework complete all as specified and directed.

Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

M & L for 0.7mm thick decorative laminate type 1, of surface finish, colour and pattern as approved,fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F in repair continuous (piano) hinges (ISI marked), mild steel, bright finish or electro-galvanised with width of flaps 20 mm (when open) complete all as specified and directed.

Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2010) and all as shown on drawing of SSR Part-II (2010) complete all as specified and directed .

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 156. complete all as specified and as directed.

Supply and fixing extruded aluminium anodised 100mm long butt hinges with galvanised mild steel screws complete all as specified and as directed .

Supply and fixing 200mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed .

S&F aluminium anodised barrel tower bolts of extruded section, 150 mm long (ISI marked) complete all as specified and as directed .

S&F aluminium anodised handles, 75mm long, cast type, fancy type fixed to woden surfaces with SS screw complete all as specified and as directed .

S&F aluminium anodised handles, 125 mm long, cast type, (ISI marked) complete all as specified and as directed .

S&F aluminium anodised handles, 150 mm long, cast type, (ISI marked) complete all as specified and as directed .

S & F floor door stopper 140mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and directed.

S & F Ball catcher with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed .

S & F in repair 2 lever MS mortice lock,vertical type of size 75mm complete all as specified and directed .

M&L in repairs 2nd HW plain fillets, square, rectangular or triangular in section, wrought, secured with nails/brads or secured with screws, cross sectional area exc 3 sqcm and n. exc 6 sqcm, complete all as specified and directed .

Supply and fixing factory made steel window or ventilators fixed type with glazing bars including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and as directed .

S&F factory made steel ventilators with top hung shutters including hinges with steel handle and steel peg stay complete all as specified and directed.

S & F 3.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S & F MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed.

Supply and fixing 600x600x4mm thick 'E' board class ie as in false ceiling including supply and fixing 'Tee' grid frame workmade of special section of MS galvanised sheet 0.3mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastner or wraping the suspending wire around the existing wooden/steel purlin/rafter for suspending grid frame work of size 600mmx600mm suspended with 2 Nos, 1.60mm dia GI wire@600mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main tee 37mmx24mmx0.60mm thick, cross runner tee 37mmx24mmx0.6mm and perimeter angle 24mmx24mmx0,5mm thick shall be fixed to wall with GI screw of 40mm long@450mm c/c along the perimeter of wall including or all as per manufacturer's instructions complete all as specified and directed .

Material and labour for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 20 mm thick screed bed in CM 1:4 complete all as specified and as directed . Note :- The quality / colour of granite shall be as decided by GE and tenderers are advised to ascertain the same before quoting their rate.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed .

Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:4 complete all as specified and as directed .

M & L vitrified tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 and including roughning surfaces of old concrete/terrazzo finish floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed .

M & L for vitrified tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:4 including taking down old plaster/terrazzo finish etc complete all as specified and directed .

Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 and including dismantling of old tiles/terrazzo finish etc; complete all as specified and directed.

Material and Labour machine pressed precast concrete coloured interlocking paver block any shape, size and pattern, IS - 15658-2006 (Marked) of 60 mm thickness of M-35 grade with grey cement & pigment complete all as specified and directed .

Material and Labour for sand filling under interlocking tiles including watering and consolidation complete all as specified.

Taking down carefully existing unserviceable copper / aluminum point wiring (light, fan, socket) complete including removal of unserviceable fittings such as switches, switch-sockets, ceiling roses, etc and removing the retrieved materials from dismantling including making good the disturbed surface of walls, floors, ceilings etc to match with the adjoining work complete all as specified and directed .

Material and Labour for point wiring with multi stranded copper conductor FRLSH cable, 1100 volts grade PVC insulated and unsheathed of size 1.5 Sqmm single core in and including PVC concealed conduit not less than 20mm dia ( medium quality ISI marked) and conduit fittings and MS sunken box of suitable size covered with and including 3 mm thick bakelite laminated sheet top cover for one fan / light controlled by one switch including provision of 1.5 Sqmm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly including cutting chasing of wall and making good disturbed surface in CM (1:3) and finishig the surface to match complete all as specified and directed .Note:- ( Switch and socket etc shall be measured and paid separately under approriate items of BOQ).

All as per item No 198 here in before but for socket outlet 5 pin, 6 Amp on same board complete all as specified and directed.

All as per item No 198 here in before but for socket outlet 5 pin, 6 Amp on independent board complete all as specified and directed .

All as per item No 198 here in before but for one socket outlet 6 pin, 6/16 Amp with cable of 2.5 Sq mm, multi stranded copper conductor FRLSH cable on the independent board including provision of 2.5 Sq mm PVC insulated unsheathed with single core, multi stranded copper conductor FRLSH cable as earth wire to common earth & connecting to earth dolly complete all as specified and directed .

S&F 6 Amps modular switch piano flush type 230 volts AC one way ISI marked complete all as specified and directed .

S&F 6 Amps semi modular switch piano flush type 230 volts AC one way ISI marked complete all as specified and directed .

S&F 6 Amps switch semi modular type 230 volts AC two way ISI marked complete all as specified and directed .

Supply and fixing modular one switch and one socket 5 pin 5 Amps, 230 Volts AC including decorative frame cover plate etc complete all as specified and as directed . Note:-Switch and socket shall be of the same make.

Supply and fixing modular one switch and one socket multipurpose 3 pin 5 Amp and 6 pin 15 Amps, 230 Volts AC including decoative frame cover plate etc complete all as specified and as directed . Note:-Switch and socket shall be of the same make.

Supply and fixing semi modular one switch and one socket 5 pin 5 Amps, 230 Volts AC including decoative frame cover plate etc complete all as specified and as directed. Note:-Switch and socket shall be of the same make.

Supply and fixing ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed .

Supply and fixing modular type regulator for ceiling fan electronic step type suitable for 1200/1400 ceiling fan complete all as specified and as directed .

Supply and fixing lamp holder angle/straight, including LED bulb 9W polycarbonate cased body with back plate suitable for batten fittings for landing T & wind shock complete all as specified and as directed .

Supply and fixing 18/20 watt Retro LED tube light fitting, wall/surface mounted, IP 20 protection, conforming to IS16106/IS16107, minimum 6000K batten decorative type 4 feet long polycarbonate body, white , in built LED driver, power factor >0.95, Make all as per Crompton cat part No. DMLN1LT8-16( for batten) and Cat Part No. LT8-20-865-2( for tube light) including 18/20 watt tube rod or equivalent model of any make given in Appendix 'B' of tender documents complete connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size complete all as specified and as directed .

Supply and fixing energy efficient LED street light of 25 Watt with PDC aluminium body and clear glass with lens for wide beam distribution, top maintainable type with IP 66 degree of protection, PF>0.95 with voltage range 140 to 170 Volt, fitting should be provided with inbuilt 5KV minimum surge protection, short circuit and over voltage protection facility for driver and fitting including 25 watt LED lamp with GI bracket-01 No, MS clamp-02 Nos suitable for walls/columns metre long twin core round copper conductor cable of 1.50 metre long twin core round copper conductor cable of suitable size and testing complete all as per SYSKA cat part No. SSK-SLF-CF-25W-WL or equivalent model of any make given in Appendix 'B' of tender documents complete all as specified and directed .

Supply and fixing 18/20 watt Retro LED tube light fitting, wall/surface mounted, IP 20 protection, conforming to IS16106/IS16107, minimum 6000K batten decorative type 4 feet long polycarbonate body, white , in built LED driver, power factor >0.95, Make all as per Crompton cat part No. DMLN1LT8-16( for batten) and Cat Part No. LT8-20-865-2( for tube light) including 18/20 watt tube rod or equivalent model of any make given in Appendix 'B' of tender documents complete connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size complete all as specified and as directed .

Supply and fixing LED mirror light of 07 watt, 6000K, linear & compact with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete including 07 watt tube rod make all as Model No LCL-7 OD Crompton or equivalent model of any make given in Appendix 'B' of tender documents complete connecting to electric point by using PVC insulated twin core copper conductor cable of suitable size complete all as specified and as directed .

S & F LED light fitting 34/36W New generation energy saving and environment friendly long life LED EDGE LIT luminaire suitable for armstrong grid ceiling complete. The driver should be procured separatly but the quoted rate should be inclusive of both fitting and driver. The fixture size in mm is 595x595x70. The module and the driver should be ordered at the same time complete with all accessories internally prewired and fixing on wall or ceiling by using twin core flexible cable 23/0.00076 from ceiling rose to LED light fittings connection complete all as specified and as directed .

S & F surface mounted, LED ceiling light 230 Volt, 12 watt complete fitting and all other accessories including electric connection connecting with using flexible copper wire twin core . Make:- Crompon cat part No. LCSR-12-CDL or equivalent model of any make given in Appendix 'B' of tender documents complete all as specified and directed . Note:- The rate of LED lamp of 12 watt base is deemed to be included in the quoted rate.Nothing extra shall be paid on this account.

Supply and fixing single phase, 50 hz, 230 volt exhaust fan of size 300 mm sweep( metal body) having BEE 5 star rating including making opening in wall for fixing exhaust fan and making good the disturbed surface by applying existing periodical treatment including making connection and providing 3 core copper conductor cable of suitable size complete all as specified and as directed .

Supply and fixing MCB, SP, 6 to 32 Amps, 'C' curve, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection complete all as specified and as directed .

Supply and fixing MCB, SPN, 40 Amps, 230 Volts, breaking capacity not less than 10 KA with over load and short circuit protection,50 Hz including necessary attachment complete all as specified and as directed .

Supply and fixing sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, 2 way, DB SPN 230 Volts, dust and vermin proof suitable for fixing MCB's and Isolators etc complete all as specified and as directed .

Supply and fixing sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, 4 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc complete all as specified and as directed .

Supply and fixing sheet metal enclosures double door made out of CRCA mild steel sheet, flush mounted, acrylic door, 8 way, DB SPN 230 Volts, with 200 Amp rated bus bar, dust and vermin proof suitable for fixing MCB's and Isolators etc complete all as specified and as directed .

Supply and fixing single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 Volt complete all as specified and as directed .

Taking down serviceable/unserviceable ceiling fans 1200mm/1400mm sweep, 230 V, AC. Single phase from room and refixing the fan to respective room after completion of B/R work complete all as specified and directed.

Material and Labour for sub main wiring with 2 single core cable 6 sqmm, 1100 votls grade PVC insulated unsheathed of copper multi strandard conductor FRLSH cable with continuous copper earth conductor of size 6 sqmm, 1100 votls grade drawing through in & including PVC concealed conduit medium grade of size 20mm along with accessories such as Tee, elbow, bend etc complete all as specified and as directed . Note :- Three runs of cable shall be measured as one unit.

S & F Electrical stainless steel auto hand dryer with an amazing sensing range, adequate airflow with low noise pollution and having power 1500/1600 wattage complete all as specified and directed. Make :- Jaquar Cat Part No. HDR-SAP-M99ACS or any other equivalent make.

S & F Electrical operated Air purifer with advanced Nano Protect filter delivers all-around protection and extra thick Nano Protect HEPA and AC filter designed for superior purification effiency and lifestyle against airbone particle which is suitable upto 1108 ft2 captures 0.003 um particles special Allegren mode CADR : air delivery 397 m3/h complete all as specified and directed. Make:- Philips Cat Part No. AC3257 or any other equivalent make.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (PCC 1:2:4 B-1 using 20 mm graded stone aggregates for concrete pit including 10 mm thick PCC slab cover frame) depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts check nuts and washers of GI or steel and connecting to earthing test point, main switch board, testing on completion including GI pipe 20 mm dia light grade for watering and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting and GI pipe 15 mm dia light grade for the protection of GI wire from earth pit to earth point, all as specified as shown in electrical plate No 3 SSR Part-I and testing on completion complete all as specified and as directed . Note :- PCC chamber shall be constructed at least 1.5 m away from earth pit pipe for watering shall be provided in slanting manner.

M/s Abnash Kumar Bholla

M/s MITTAL CONSTRUCTIONS

SHARDA ENTERPRIES