Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC | L1 | Accepted-AOC Found lowest bidder | |
| 2 | L2₹34.0 L+₹3.7 L (12.4%)Rejected-Finance 4029 KALI MAI ROAD NASIRABAD AJMER RAJASTHAN 305601 | AJMER | RAJASTHAN | 305601 | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹37.8 L+₹7.5 L (24.9%)Rejected-Finance 25 SHIV SAROVER COLONY GARH ROAD MEERUT 250002 | MEERUT | UTTAR PRADESH | 250002 | L3 | Rejected-Finance 3rd lowest | |
| 4 | Rejected-Technical D 55 HAKIKAT RAI RD ADARSH NAGAR DELHI 33 | - | Rejected-Technical Not recommended for opening of Financial bid, as firm has not uploaded residual work load in terms of NIT Note No 1. In this connection also ref HQ CWE Meerut letter No. 9102/Contracts/14/E8 dt 31 Oct 2023 | |
| 5 | Rejected-Technical | - | Rejected-Technical Not recommended for opening of Financial bid, as firm has not uploaded residual work load in terms of NIT Note No 1. In this connection also ref HQ CWE Meerut letter No. 9102/Contracts/14/E8 dt 31 Oct 2023 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
4 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Meerut Cantt
GE (North) Meerut Cantt
Periodical services in Md Accn / OTM Accn and Welcome Maint of Offrs Md Accn and Internal Electrificatin at EBS Babugarh under AGE B/R-II and AGE E/M-I of GE (North) Meerut Cantt.
2023_MES_622173_1
8431/E8
Open Tender
Civil Works
Item Rate
180 days
Meerut
Class D Category a (i)
8 documents required · 8 mandatory
₹500
GE (North) Meerut Cantt
₹1 L
Yes
1 Feb 2024
7 Oct 2023
6 Nov 2023
7 Oct 2023
4 Nov 2023
21 Oct 2023
Amount
Taking down cement plaster of any description and thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed.
Demolition of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 using ready mix plaster bags on brick/concrete suface of extenal wall finished even and fair complete all as specified and directed. Make : Ultratech, rediplast, Birla Acrocem. Note : Contractor is required to deposit ready mix bags for 100% CA quanitity to Engr-in-charge with in 15 days of acceptance of contract.
M&L for 10 mm thick cement plaster in cement mortar (1:3) finished even and smooth without using extra cement as on ceiling complete all as specified and directed.
M&L for 15 mm thick cement plaster in cement mortar 1:3 in chajjas/beam/Ceiling etc with X PM if required to make up to original shape at any height complete all as specified and directed.
M&L for preparation of new plastered surface of wall and applying two coat of oil emulsion distemper over a coat of chalk whitening complete all as specified and directed.
M&L for prepration of new plastered surfaces of walls including cornices, pilasters etc(Plastered or unplasterd surfaces) and applying three coats of white (Lime) wash complete all as specified and directed.
M&L for preparing new plastered surfaces of ceiling and appying three coat of white wash complete all as specified and directed.
M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and diretced.
M&L for brick work (Except brick) with Sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tilling including cement mortar beddingand removing rubbish off the premises complete all as specified and directed.
M&L for coloured glazed ceramic tiles of size 300x450x 6-7 mm/ 450mm x 350mm x 7mm fixed with neat cement slurry in vertical surface of wall, pointing in white/coloured cement to match complete all as specified and directed by Engineer - in - Charge.
M&L for 10 mm thick backing coat in cement mortar 1:4 on vertical surfaces of wall to receive tiles etc complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
M&L for light shade vetrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm as in floor etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.
M&L for light shade vetrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.36 sqm and not exceeding 0.42 sqm as in skirting/ vertical surfaces of wall etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. .
M&L for granite(of any type) tiles 16 to 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and making suitable holes for gas pipe complete all as specified and directed.
M&L for screed bed of 15 mm thick in cement mortar 1:6 to receive the top layer of tiles complete all as specified and directed.
M&L for prepration of old surfaces of walls including scraping down smoke soots, moulds, moss and treating oil and greasy spots etc including cornices, pilasters etc( Plastered or un plastered surfaces) and applying one coat of white (lime) wash complete all as specified and directed.
All as per item No 19 above butt one coat of white wash on ceiling complete all as specified and directed. .
All as per item No 19 above but two coats of white wash on walls complete all as specified and directed..
All as per item No 19 above but two coats of white wash on ceiling complete all as specified and directed.
M&L for prepration of old decorated surfaces of walls, washing rubbing down and stoping of distempered and painted surfaces and applying one coat of oil bound distemper using roller for painting over and including a coat of 2 mm thick wall putty wherever required complete all as specified and directed.
M&L for prepration of old decorated surfaces of walls by washing rubbing down and stoping of distempered and painted surfaces and applying two coat of external acrylic paint using roller for painting over and including a coat of 2 mm thick wall putty complete all as specified and directed.
M&L for prepration of old wooden surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for prepration of old steel surfaces of any description not otherwise described over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each complete all as specified and directed.
ditto all as per item No 27.00 above but area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed..
Taking down shutter/ leaf only of any description area exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.
M&L for mild steel work ( Fe 410 W Gde E-250 Quality 'A' ) as in door frame chowkhat including necessary cutting drilling and welding etc complete all as specified and directed.
S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. .
S&F 35mm thick IInd class hard wood glazed or skelton shutter open rebated prepared to receive glass, gauge etc. without sash bars edges of framing plain fitted with cut and mitred beads for securing glass etc size of member all as per clause 8.24(a) of SSR Part-I complete all as specified and directed..
S&F steel window with pressed steel frame made out from 1.25 mm thick steel sheet with one or more rebate with glazed shutters and mosquito proofing shutter including guard bars, hinges, peg stay, handles, tower bolts, lugs incl treated with tar or coat tar black paint on steel surfaces in contact/embedded in concrete/masonary work complete all a specified and shown on drawing complete all as specified and directed.
S&F steel ventilator with top hung shutter incl hinges steel peg stay complete all as specified and directed.
S&F in repair CP Towel rack with rail and hooks size 18" - 24" S/S complete all as specified and directed.
S&F anodised aluminium window and ventilator shutters including aluminium grills , side hung type without sash, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodise aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos) suitable handle (1 No), 4.8 mm thick glass etc complete all as specified and directed.
S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed.
S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed.
Hacking out old broken glass ( any thickness, size, quality or description ) from metal frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
M&L for 4.8mm thick sheet glass, fixed with rubber gasket beading and aluminium channels in aluminium door and windows complete all as specified and directed.
S&F in repair CP brass 15 mm dia pillar cock swan neck fixed with WHB complete all as speciied and directed.
S&F 250mm long mild steel sliding door bolts stove enamelled black ISI Marked, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F in repair 250mm long mild steel sliding door bolts stove enamelled black ISI Marked, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F 100mm size butt hinges medium weight cold rolled mild steel ISI marked complete all as specified and directed.
S&Fin repair 100mm size butt hinges medium weight cold rolled mild steel ISI marked complete all as specified and directed.
S&F 200mm long mild steel tower bolt stove enamelled black with bright bolt ISI Marked complete all as specified and directed.
S&F in repair 150mm long mild steel tower bolt stove enamelled black with bright bolt ISI Marked complete all as specified and directed.
S&F in repair 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 125mm mild steel pressed handles oval type, stove enamelled black complete all as specified and directed.
S&F in repair 125mm mild steel pressed handles oval type, stove enamelled black complete all as specified and directed.
S&F in repair 150 mm long aluminium handles cast type complete all as specified and directed.
M&L for preparation of new wood surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
S & F 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately)” Make: Rajshree, ECOCELL, M/s TVL Engineers Pvt Ltd, New Delhi (Floresta) or equivalent make in PS
S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make: Rajshree, ECOCELL, M/s TVL Engineers Pvt Ltd, New Delhi (Floresta) or equivalent make in PS
S&F 100 mm Hasp and staple, mild steel stove enamelled black including bolt to hing plate and fixed with screws complete all as specified and directed.
S&F in repair 300 mm long ordinary mild steel rat tail rod pattern springs including roller, roller plate complete fixed to wooden/ steel frame complete all as specified and directed.
S&F in repair CP 15 mm dia sink cock swan neck fixed with wall end with flange, complete all as speciied and directed.
S&F in repair Floor door stopper of aluminium alloy body and tonge, anodised with hard drawn steel spring complete all as specified and directed.
Taking down and refixing in the same opening of PVC doors by making edging etc all as specified and directed by Engineer - in - Charge.
S&F in repair continuous (piano) hinges, mild settl, bright finish or electro galvanised, width of flap (when open ) 40 mm complete all as specified and directed.
S&F in repair 40 mm dia brass polished, bright finished cup board knobs fixed with nut screws and washer complete all as specified and directed.
S&F in repair for MS CP tubular curtain rod as per sample kept in AGE B/R-II office complete all as specifed and directed.
S&F in repair brass CP brackets and knobs for curtain rod as per sample kept in AGE B/R-II office complete all as specifed and directed. complete all as specified and directed.
M&L for 18/19 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work as in cup board shelves kitchen cup borad etc complete all as specified and directed.
S&F in repair ply board grade BWR type BB 11/12 mm thick(9 ply) ISI marked fixed with screw to timber frame work complete all as specified and directed.
S&F in repair for 01 mm thick MS plain sheet for making modified lid of water tank and fixed with 04 nuts and bolts to water tanks for water capacity n. exc 750 lt. all as specified and directed and sample kept in AGE B/R - II Office.
S&F in repair mild steel window handle left/right with screws complete all as specified and directed.
S&F in repair Mild steel peg stay 300 mm for steel window with screws complete all as specified and directed .
Taking up of or down steel tubing and connections 15 mm bore complete all as specified and directed.
Taking up of or down steel tubing and connections 20 mm bore complete all as specified and directed.
S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.
S&F 20 mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.
S&F in repair angle valve,15 mm cast copper alloy chromium plated fancy type with long shank &cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete all as specified and directed.
S&F in repair stop valve,20 mm cast copper alloy chromium plated fancy type with long shank &cup with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 20 mm bore iron fixed complete all as specified and directed.
S&F in repair cast copper alloy chromium plated bib tap 15 mm fancy type long body with crutch or butterfly handle screwed down, screwed for iron pipe for for brass ferrule complete all as specified and directed.
S&F in repair two way bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete fixed in rep complete all as specified and directed.
S&F in repair angular valve 15 mm bore dia cast copper alloy CP fency type with long shank and cup screwed down high pressure screwed both ends for iron pipe complete all as specified and directed.
S&F in repair 15 mm dia wash hand basin mixer chromium plated , screwed down with high pressure with or without lettered 'HOT'or 'COLD' with long screwed shanks and fly nuts complete all as speciied and directed.
S&F in repair MS CP grating doom 125 mm dia with/without waste hole over floor/Nani trap complete all as specified and directed.
S&F in repair CP brass Health faucet set classic chrome 2 in 1 (with tube and hook) with 1 mtr CP tube & Hook complete all as specified and directed. Cat part No HF 133 Make Pearl/Prayag or equivalent model of make mentioned in PS
S&F in repair health faucet tube with hose only with 900 mm to 1200 mm length complete all as specifed and directed.
S&F in repair for plate rack of stainless steel 1 mm thick for kitchen or labotary over all size 720 x 600 x 230 mm fixed with plugs and washers on wall complete all as specified and directed.
S&F in repair, vitreous china wash down water closet pan, 'Pedestal' pattern (EWC) including CP brass jet spray,PVC seat cover including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified and directed.
S&F in repair PVC seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device for EWC complete all as specified and directed.
S&F in repair CP brass Toilet papar holder complete all as specified and directed. Make Prayag cat No BA 48 or equivalent model of make mentioned in PS
S&F in repairs PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete, fixed in repairs complete all as specified and directed. Make :- SLIMLINE ( ECONOMY) with front knob of Parryware or equivalent in Hindustan Sanitary ware or equivalent model of make mentioned in PS
S&F in repair PVC connection fiber reinforced suitable for HOT WATER, 600 mm long with brass check nut and PVC washers at both ends complete all as specified and directed. Make Pearl/Prayag or equivalent make in PS. (Suitable for MAP Qtrs as per sample kept in AGE B/R-II office).
S&F in repairs 1000 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified and directed.
S&F in repairs 300 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hosted and fixed in position incl dismantling of existing tank of any description complete all as specified and directed.
Cleaning of water tanks of capacity 500 ltr and not exceeding 1000 ltr by removing all scale and dirt, etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.
S&F in reapirs 20 mm bore Ball PTMT valve high pressure with plythene float and fly nut screwed for iron pipe or brass ferrule complete all as specified and directed.
S&F in repair 15 mm bore Ball PTMT valve high pressure with plythene float and fly nut screwed for iron pipe or brass ferrule complete all as specifed.
S&F in repair 15 mm dia 40 mm long CP brass extension nipple complete all as specifeid and directed.
S&F in repair 15 mm dia 50 mm long CP brass extension nipple complete all as specifeid and directed.
S&F in repair for cast copper alloy chromium plated shower rose with arms complete all as specified and directed.
S&F in reair corner glass shelf with bracket (as per sample kept in AGE B/R-II sub division ) complete all as specified and directed by Engineer - in - Charge.
S&F in repair for acrylic bathroom corner shelf set of 03 as per sample kept in AGE B/R-II sub div complete all as specified and directed.
S&F in repair for Vitreous china wash hand basin, white flat, size 550 x400 mm incl brackets waste coupling and waste pipe (oval shape ) all as specified and directed by Engineer - in - Charge.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste coupling and waste pipe complete all as specified and directed.
S&F in repair CP brass tubular towel rail 600 mm long complete all as specified and directed.
S&F in repair stainless steel/CP/brass spindle for Bib cock, stop cock, pillar tap, angle valve ,wall mixer etc half or full turn of any description and size complete all as specified by Engineer - in - Charge.
S&F in repair brass 2 levers mortice lock verticle type size 100 with two S/S handles and all fixing components complete all as specified and directed.
Demolition and breaking up drain pipes 100 mm dia (salt glazed ware, AC or reinforced concrete) or PVC pipe set in cement mortar complete all as specified.
S&F 75 mm PVC (SWR) pipes (pressure rating 6kg/cm square) single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed
S&F 110 mm PVC (SWR) pipes (pressure rating 6kg/cm square) single socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F in repair 75 PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specieid and directed.
S&F in repair (SWR) gully trap 125/110 mm setting and jointing with solvent cement complete all as specified and direted.
S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F in repair UPVC (SWR) junction single, (Single T) equal or unequalnd, 110 mm bore with access door complete all as specified and directed.
S&F in repair UPVC (SWR) cowl, 75 mm bore complete all as specified and directed.
S&F in repair UPVC (SWR) cowl, 110 mm borecomplete all as specified and directed.
Taking down carefully copper/ aluminium point wiring (light, fan,socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good disturbed surfaces of walls, floors etc. including paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sq mm single core PVC insulated FRLS cable 1100 volts grade with multi-stranded copper conductors, drawn thorough and including non metallic med. grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings) and including provisoin of 1.5 sqmm PVC insulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3 mm thick hylum sheet for fixing the switches /sockets/ regulators etc for the following complete all as specified and as directed :-
One light point controlled by one way switch.
One light point controlled by 2-way switch.
One ceiling fan/ exhaust fan point controlled by one way switch.
One 3 pin socket outlet 5 Amps on the same board with other switches.
One 3 pin socket outlet 5 Amps on the Independent board.
One bell/ buzzer point controlled by one push button on the same board with other switches or independent.
All as per item No- 116 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.
All as per ser item No- 116 here-in-before but for supply and drawing 1.5 sqmm copper conductor cable with one 1.5 sqmm continuous earth wire into existing conduit after taking out the existing wiring including replacement of required size of terminal box with 3mm thick bakelite sheet cover fixed with brass screws all as specified and as directed for :-
One light point / Fan point controlled by one way switch.
One light point controlled by 2-way switch.
One 3 pin socket outlet 5 Amps on the same board with other switches.
One 3 pin socket outlet 5 Amps on the Independent board.
One bell/ buzzer point controlled by one push button on the same board with other switches or independent.
All as per item No 116 above but with sunk zinc coated pressed steel terminal boxes suitable for modular fixtures including suitable Modular box, base plate and outer plate all as directed for One light/Fan/Bell point controlled by one, one way modular switch 06 Amps.
All as per item No 116 above but One 06 Amps socket outlet point on independent board controlled by one, one way modular switch 06 Amps complete all as specified and as directed.
All as per item No 116 above but One 06 Amps outlet point on same board controlled by one, one way modular switch 06 Amps complete all as specified and as directed.
All as per item No 116 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable with earth wire 2.5 sqmm for one 16 Amps socket outlet point on independent board complete all as specified and as directed.
S&F in repair Switch Piano, flush type single pole, one way 6 Amps complete all as specified and as directed.
S&F in repair Switch Piano flush type two way 5 Amps complete all as specified and as directed.
S&F in repair Switch Piano, flush type single pole, one way 15 Amps complete all as specified and as directed.
S&F in repair Switch bell push 5 Amps flush type 5 Amps complete all as specified. and directed.
S&F in repair socket outlet 5 pin and 5/6 Amps flush type complete all as specified and as directed.
S&F in repair socket outlet flush type 2 in 1, 3 pin , 5 and 15 Amps complete all as specified and as directed
S&F in repair Stepped type electronic fan regulator flush type SP/DP complete all as specifeid and as directed.
S&F in repair Ceiling rose PVC/ Polycorbonate insulated body with three terminals complete all as specified and as directed.
S&F in repair bell, Ding Dong AC, 230 volts, SP complete all as specifeid and as directed.
S&F in repair Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings including LED lamp 10W complete all as specified and as directed.
S&F in repairs LED tube light fitting surface mounting, CRCA batten decorative box type , 4 feet, 240V, 20 Watt, including T-8 poly carbonate diffuser type 20 watt rectrofit tube rod complete all as specified and as directed. .
S&F in repairs integrated LED tube light fitting surface mounting, poly carbonate batten type, 4' , 240V, T5, 20 watt complete all as specified and as directed.
S&F in repairs integrated LED tube light fitting surface mounting, Poly carbonate batten,2', 240V, T5, 9/10 Watt complete all as specified and as directed.
S&F in repairs, IP65, Post Top,energy saving spun Aluminium landscape luminaire with 15 / 20 Watts high power LEDs of complete all as specified and as directed.
S&F in repairs Retrofit polycarbonate diffuser type 20 watt retrofit LED tube rod 4 feet, 240V compete all as specified and directed.
S&F in repair sub main wiring with two runs of 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors 1100 volts grade, drawn through and including PVC conduit and its accessories of suitable size and including concealing and finising to match with the sorroundings complete all as specified and as directed. NOTE:- two runs of 4.0 Sq mm + one run of 4.0 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length.
S&F in repair sub main wiring with two runs of 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors 1100 volts grade, drawn through and including PVC conduit and its accessories of suitable size and including concealing and finising to match with the sorroundings complete all as specified and as directed. NOTE:- two runs of 6.0 Sq mm + one run of 6.0 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length.
S&F in repair sub main wiring with four runs of 6.0 Sq mm and two run of 6.0 Sq mm for earth wire with multi standard copper conductors 1100 volts grade, drawn through and including PVC conduit and its accessories of suitable size and including concealing and finising to match with the sorroundings complete all as specified and as directed. NOTE:- four runs of 6.0 Sq mm + two runs of 6.0 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length.
S&F in repair sub main wiring with four runs of 10.0 Sq mm and two run of 10.0 Sq mm for earth wire with multi standard copper conductors 1100 volts grade, drawn through and including PVC conduit and its accessories of suitable size and including concealing and finising to match with the sorroundings complete all as specified and as directed. NOTE:- four runs of 10.0 Sq mm + two runs of 10.0 Sq mm and one run of PVC conduit and its accessories of suitable size shall be measured as one unit length.
S&F in repair MCB Distribution board double door type (for incoming MCCB & out going MCBs) VTPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing only incoming MCCB and MCBs of various rating capacity including taking down existing unsv DB complete all as specified and as directed.
S&F in repair MCB Distribution board double door type TPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down existing unsv DB complete all as specified and as directed.
S&F in repair MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down existing unsv DB complete all as specified and as directed.
S&F in repair MCB Distribution board double door type SPN 12 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating including taking down existing unsv DB capacity complete all as specified and as directed.
S&F in repair MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down existing unsv DB complete all as specified and as directed.
S&F in repair MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity including taking down existing unsv DB complete all as specified and as directed.
S/F in repairs, 4 Pole MCCB 63 Amps, 50 Hz, 415 V with rupturing capacity 16 KA with thermal - Magnetic Release ISI Marked complete all as specified and as directed.
S/F in repairs, 4 Pole MCCB100 Amps, 50 Hz, 415 V with rupturing capacity 25 KA with thermal - Magnetic Release ISI Marked complete all as specified and as directed.
S&F in repair MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.
S&F in repair Isolator TPN 100 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.
S&F in repair MCB SPN 40 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.
S&F in repair MCB SPN 32 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.
S&F in repair MCB SP 6-32 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.
Supply & fix in repair Modular switch 6A 1 way complete all as specifeid and as directed.
Supply & Fix in repair Modular switch 16A 1 way complete all as specifeid and as directed.
Supply & fix in repair Modular Socket outlet 6A complete all as specifeid and as directed.
Supply & fix in repair Modular Socket outlet 6/16A complete all as specifeid and as directed.
Supply & fix in repair Modular switch bell push complete all as specifeid and as directed.
S&F Modular Step Fan Regulator, 2 module, 120W, AC, 240V, ISI Marked complete all as specified and as directed.
Supply & fix in repair condenser 2.5 MFD suitable for ceiling/ Exhasut fan complete all as specified and as directed.
Supply & fix in repair condenser 3.15 / 4 MFD suitable for ceiling/ Exhasut fan complete all as specified and as directed.
Supply & fix in repair/ replacement LED lamp 15 Watts 2 pin with B22 base, clear acrylic diffuser, power factor .90, 100 lumens per watt all as directed.with inbuilt accessories of capacity 5W complete all as specified and as directed.
All as per item 163.00 above but 12 Watts complete all as specified and as directed.
All as per item 163.00 above but 9 Watts complete all as specified and as directed.
All as per item 163.00 above but 5/6 Watts complete all as specified and as directed.
S&F in repair/ replacement LED 10 watt (Bulk head light fitting) cast aluminium oval shape body finished with stove enameled & heat resistant oval shape designed clear /diffuser glass cover with rubber gasket.with wire mash guard complete all as specified and as directed.
Supply only insulation tape 20mm x 25M ISI marked complete all as specified and as directed
S&F in repair/ replacement LED pannel Recess mounted 2'x 2', 36 watts light fitting SIM type with inbuilt including connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose complete accessories and making all necessary connection complete all as specified and as directed
S&F Water heater storage type steel body with copper inner tank and heating element upto 2KW capacity 25 ltr, BEE 5 stared complete with a rating including providing of hold fast in wall and PVC connection 45 cm long with 15 mm dia brass union at both end heavy duty complete all as specified and derected by Engr-in-charge.
S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.
S&F in repair/ replacement LED pannel Recess mounted 2'x 2', 24 watts light fitting SIM type with inbuilt including connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose complete accessories and making all necessary connection complete all as specified and as directed
Carrying out Electrical maint work of day to day Internal Electric or Fans or Geysers or Solar Water Heaters complaints such as repair / rectification / replacement of defective items like wiring, cables, switches, sockets,holders, ceiling rose, call bells, condensers,tube rods,fittings,fixtures,LED drivers,MCB's,MCCB's,DB's,Heating Elements,Thermostats, Hot water connections etc. by providing skilled Technician at any location under GE (North) Meerut AoR all as specified and directed by Engr-in-Charge.(Store required will be provided seperately)
S&F in replacement of PVC water disributer 3 way with PVC pipe 15 mm with 15 mm dia flexible braided OD for Desert cooler of any size/capacity complete all as specified and as directed.
S&F in replacement of Sumersible pump 18 watt, 230V, single phase for Desert cooler of any size/capacity.Make : Bajaj / CG or equivalent make in PS
S&F in replacement of wood wool pad for desert cooler of suitable size in wire net complete weight not less than 450 gms. ( set of three ) complete all as specified and as directed.
S&F in replacement fan motor copper wounded suitable for desert cooler 230 Volts, 50HZ, single phase, Heavy duty, AC supply four speed 180 watts of 450 mm sweep complete with fan blade and legs complete all as specified and as directed.. Make : CG /Bajaj / Havells
S&F in repairs, PVC fresh air fan, 300mm sweep with louvers, AC, 230V incl T/D old u/s one and depositing to MES complete all as specified and directed.
S&F in repair/ replacement copper cable 1100 volts grade with multi-stranded copper conductors of size 1.5 Sqmm complete all as specified and as directed
S&F in repair/ replacement copper cable 1100 volts grade with multi-stranded copper conductors of size 2.5 Sqmm complete all as specified and as directed
S&F in repair/ replacement copper cable 1100 volts grade with multi-stranded copper conductors of size 4.0 Sqmm complete all as specified and as directed
S&F in repair/ replacement PVC insulated copper cable 1100 volts grade twin twisted flexible conductor 23/0.76 complete all as specified and as directed
S&F in repair/ replacement PVC insulated copper cable 1100 volts grade twin twisted flexible conductor 40/0.60 complete all as specified and as directed
S&F in repair/ replacement Temper proof digital energy meter Single Phase 230 volts of capacity 5-30A complete all as specifeid and as directed. NOTE: Taken down unsv Electric meter of any description will be deposited in E/M store.
S&F in repair/ replacement Temper proof digital energy meter three Phase 415 volts of capacity 10-40A complete all as specifeid and as directed. NOTE: taken down unsv Electric meter of any description will be deposited in E/M store.
M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers, to & including 4.0 mm galvanized iron wire as earth lead, extended upto 7.5 m or upto test terminal point, drawn through 15mm dia med. gr. GI pipe for protection of galvanized iron wire in the ground, further connecting with suitable size of earthing lead to Distribution boards etc., including excavation, earth work, Charcoal & Salt all as specified, PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.3 of SSR Pt-I, complete all as specified and as directed. NOTE: a) GI Pipe for protection of earthing strip and earth strip beyond 7.5m or test point shall be measured and paid seperately under relevant items.
S&F in repair taking down ceiling fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavaties with fillet, painting with synthetic enamel paint by spraying including reassembling blades and hanging ceiling fan including connecting up with flexible copper cable of size 0.75 Sq mm 3 core from ceiling rose fan connector complete all as specified and as directed.
All as per item No. 183.00 here-in-before but exhaust fans of any sweep complete all as specified and as directed.
Dismantling the unserviceable bearing and supply and fix sealed bearing suitable for the existing Ceiling fans / exhaust fans complete all as specified and as directed.
Dismantling the unserviceable Gun metal bush supply and fix gun metal bush suitable for existing wall mounted/ pedestal/ exhasut fans complete all as specified and as directed.
Dismantle the unserviceable shackle assembly comprising GI bolts, nuts, rubber bush and split pin complete all as specified and as directed.
M&L for removing the defective fan winding and rewinding with super enamelled copper wire of existing gauge, applying insulation varnish, pre heating and binding with empire tubes, crimple sheet etc. as required for rewinding complete all as spedified and as directed for:-
Ceiling fan of size upto 1200/1400 mm sweep.
Exhaust fan of size 350 to 450mm Sweep.
Exhaust fan of size upto 300 mm Sweep.
Taking down the electric Geyser of capacity 25 ltrs/ 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections, dismantling the unit, painting with one coat of synthetic enamel paint and refixing in its original position and reconnecting the inlet/ outlet water pipes and testing on completion complete all as specified and as directed.
S&F of following items in repairs, suitable for single phase, 230 Volts, 50 Hz for existing type electric Geyser of capacity 25/50 ltrs including taking down unsv spares items complete all as specified and as directed:-
Geyser heating element 1500 / 2000 watts push/ thread type porcelain / Circular / triangular type as required at site.
Thermostat as per the existing type at site .
Thermostate controller of existing type at site,
Indication lamp red/ green.
Aperture plate assembly complete for the geyser of capacity 25 ltr
Aperture plate assembly complete for the geyser of capacity 50 ltr
Taking down the electric geyser of capacity 25 Ltrs / 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, dismantling the unit, taking out the inner leaking copper shell, brazing the copper shall, testing for leaks, re-assembling the geyser including provision of additional glasswool as required, refixing in position, testing for functionality and commissioning complete all as specified and as directed.
Taking down unserviceable PVC connection of any description and supply and fix new PVC connection 15mm dia 450mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water complete all as specified and as directed.
Taking down unserviceable PVC connection of any description and supply and fix new PVC connection 15mm dia 600mm long with brass nuts, and rubber washers on both sides suitable for cold/ hot water complete all as specified and as directed.
M&L for Servicing of Solar water Heater of any capacity complete by cleaning soar panel with sutable cleaning agent complete all as specified and as directed.
S&F in repairs Solar water heater heating element of capcity 3 KW, single phase, 230 Volts, 50 Hz for existing type Solar water geyser including taking down unsv spares complete all as specified and as directed.
Disconnect and remove unserviceable starting relay and Supply and fix new starting relay suitable for existing model of following cooling appliances complete all as specified and as directed: -
Water cooler of capacity upto 150 Ltrs
Refrigerator/ deep freezer of capacity upto 310 Ltrs
Disconnect and remove unserviceable over load protector and supply and fix new overload protector (OLP) suitable for existing model of following cooling appliances complete all as specified and as directed: -
Water cooler of capacity upto 150 Ltrs
Refrigerator/ deep freezer of capacity upto 310 Ltrs
Disconnect and remove unserviceable thermostat and supply and fix new thermostat suitable for existing model of following cooling appliances complete all as specified and as directed:-
Water cooler of capacity upto 150 Ltrs
Refrigerator/ deep freezer of capacity upto 310 Ltrs
Disconnect and remove unserviceable starting capacitor and supply and fix new starting capacitor suitable for existing model of following cooling appliances complete all as specified and as directed:-
Water cooler of capacity upto 150 Ltrs
Refrigerator/ deep freezer of capacity upto 310 Ltrs
Disconnect and remove unserviceable running capacitor and supply and fix new running capacitor suitable for existing model of following complete all as specified and as directed:-
Water cooler of capacity upto 150 Ltrs
Refrigerator/ deep freezer of capacity upto 310 Ltrs
Disconnect and remove unserviceable compressor and supply and fix new sealed rotary/ reciprocating compressor, including brazing the suction/discharge lines suitable for existing model of following cooling appliances, filling the gas and testing on all as specified and as directed :-
Water cooler of capacity 40/80 Ltrs
Water cooler of capacity 60/120 Ltrs
Refrigerator/ deep freezer of capacity upto 165 Ltrs
Refrigerator/ deep freezer of capacity 310/320 Ltrs
M&L for Checking of leakage of of the following cooling applainces by putting the nitrogen pressure, identifying the leaks / defects ,repairing the same by brazing/ welding of bottom leg supports and testing and vaccuumising the system and charging suitable refrigerant gas and oil in desired level complete all as specified and as directed :-
Water cooler of capacity 40/80 Ltrs
Water cooler of capacity 60/120 Ltrs
Refrigerator/ deep freezer of capacity upto 165 Ltrs
Refrigerator/ deep freezer of capacity 310/320 Ltrs
Taking down the corroded body of water cooler of any capacity, tinkering the corroded sheet metal parts, bottom base, angle iron frame, fan motor base plate, side covers, legs, door etc. with appropriate gauge MS sheet, angles by welding and brazing, renewal of nuts and bolts sheets metal screws, re-assembling, preparing the surface and painting with two coats of synthetic enamel paint over a coat of zinc chrome primer including renewal of door gasket where ever required complete all as specifeid and as directed.
Taking out unserviceable waste water tray of any description and supply and fix new steel waste water tray suitable for existing water coolers complete all as specified and as directed.
Taking out unserviceable ball valve assembly and supply and fix new PVC ball valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of size 15 mm dia bore suitable for water coolers / desert coolers complete all as specified and as directed.
Taking out unserviceable push button tap and supply and fix new chromium plated push button tap of size 15 mm dia bore suitable for water cooler complete all as specified and as directed.
Taking out unserviceable stop valve of any description and supply and fix new stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of size 15mm dia complete all as specified and as directed.
Taking out unserviceable PVC waste water pipe from Water cooler and supply and fix new PVC waste water pipe of suitable size complete all as specified and as directed.
Taking out unserviceable plug top of any description and supply and fix new plug top 3 pin 15 Amps single phase 230 volts complete all as specified and as directed.
Taking out unserviceable plug top of any description and supply and fix new plug top 3 pin 5 Amps single phase 230 volts complete all as specified and as directed.
Taking down unserviceable plug and socket of any description, supply and fix sheet metal enclosure with single pole and neutral with two pin and earth plug and socket along with a 20 to 30Amps rated SP MCB, 230 volt, 50 HZ as required at site, complete all as specified and as directed.
Disconnect and remove unserviceable copper cable of any description and supply and connect new PVC insulated and PVC round sheathed 3 core, 1.5 Sqmm Copper conductor cable, heavy duty, 1100 Volts grade all as specified and as directed.
Disconnect and remove unserviceable copper cable of any description and supply and connect new PVC insulated and PVC round sheathed 3 core, 2.5 Sqmm Copper conductor cable, heavy duty, 1100 Volts grade all as specified and as directed.
S&F 1x25 Watt LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed.
S&F 1x45 Watt LED Building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed.
Disconnect and remove unserviceable electronic voltage stablizer of any description and S&F automatic electronic voltage stabilizer of capacity 5.0 KVA having features such as Intelligent time Delay system, Low and High Voltage Cut-off Protection, latest IC Technology to protect from power fluctuations, Thermal over load protection, wide input variation between 170V to 270V with output voltage stablized at 220 to 240V, with accuracy of +/- 2.5% and of following capacity suitable for Water cooler/ Refrigerator etc. complete all as specified and as directed.
Disconnect and remove unserviceable electronic voltage stablizer of any description and supply and fix automatic electronic voltage stabilizer of capacity 4.0 KVA having features such as Intelligent time Delay system, Low and High Voltage Cut-off Protection, latest IC Technology to protect from power fluctuations, Thermal over load protection, wide input variation between 170V to 270V with output voltage stablized at 220 to 240V, with accuracy of +/- 2.5% and of following capacity suitable for Water cooler/ Refrigerator etc. complete all as specified and as directed.
M/S KAPIL ENTERPRISES
A.V. ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .