Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.5 LAccepted-AOC 583 URBAN ESTATE II HISAR 125005 | HISAR | HISAR | HARYANA | 125005 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹51.2 L+₹2.4 L (5.02%)Rejected-Finance 6146 HIRA CHOWK SIRKI BAZAR BATHINDA PB 151005 | BATHINDA | PUNJAB | 151005 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹53.1 L+₹4.4 L (9.06%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L3 | Rejected-Finance Being L3 |
Tender Value
₹46.9 L
EMD Value
₹94,000
Closing Date
29 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(W) HISAR
GE(W) HISAR HISAR MIL STN HISAR 125006
GE(W)/HSR-48/2022-23 SPL REPAIR TO MES INSTALLATION BLDGS AND PROVN OF MAIN SEWAGE LINE AT CROSSING OF TANK ROUTE AT 42 ARMD REGT AREA AT HISAR MIL STN AT HISAR MIL STN UNDER GE (W) HISAR
2023_MES_584041_1
GE(W)/HSR-48/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE(W) HISAR
As per tender documents
8 documents required · 8 mandatory
₹500
GE(W) HISAR
₹94,000
Yes
23 May 2023
3 Mar 2023
31 Mar 2023
3 Mar 2023
29 Mar 2023
17 Mar 2023
Amount
Demolition of cement concrete(unreinforced)/ lime concrete as in sunken portion / ground floor exceeding 15cm thickness including removing rubbish complete all as specified and directed.
M&L providing cement concrete (1:2:4) type B-0 (12.5 mm graded aggregates) as in padding as in sunken portion of slab etc complete all as specified and directed.
M&L providing cement concrete (1:5:10) type E-2 (40 mm graded aggregates) in filling and mass concrete in suken portion of slab etc complete all as specified and directed.
S&F, PVC Floor trap 75mm bore with grating incl jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
Dismantling 100mm dia of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.
Dismantling cast iron work of any description complete all as specified and directed.
S&F in repair 110mm dia PVC bend any radius. complete all as specified and directed.
S&F PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints fixed to walls Completed all as directed.complete all as specified and directed.
S&F PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
S&F PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.
S&F PVC (SWR) bends 110 mm bore with/without access door any radius complete all as specified and directed.
S&F PVC (SWR) bends 75mm bore with/without access door any radius complete all as specified and directed.
S&F PVC (SWR) single junction 'T' 75 mm bore with access door any radius complete all as specified and directed.
S&F PVC (SWR) single junction 'T' 110 mm bore with access door any radius complete all as directed.
Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store. complete all as specified and directed.
Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specified and directed.
S&F steel water tubing galvanised 15mm bore, med grade fixed to walls and ceiling or in floor complete all as specified and directed.
S&F steel water tubing galvanised 20mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified and directed.
Supplying and laying of 20 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors complete all as specified and directed
S&F Male Brass threaded Adaptor Tee for special fitting of 20 mm bore CPVC pipe complete all as specified and directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified.
M&L glazed ceramic coloured tiles, (350x450)x7mm / (350x250)x7mmthick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
Supply only water proofing compound. complete all as specified and directed.
S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including PVC/CI 'P' or 'S' trap and WC Connector with leaping ring connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified and directed.
M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. Including Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
All as per item No 27.00 above but in CM 1:4 complete all as specified and directed.
All as per above item No 27.00 above but 10mm thick in CM 1:3 as in ceiling complete all as specified and directed. Note : Supply only of WPC will be measured and paid under separate item
M & L two coat of oil bound distemper on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed
M & L one coat of oil bound distemper on old or new plastered surfaces of walls over a coat of 1mm thick wall care putti including preparation of surfaces complete all as specified and directed.
M & L two coat of weather proof paint on new surfaces of walls including preparation of surfaces completeall as specified and directed
M & L one coat of weather proof paint on old or new surfaces of walls including preparation of surfaces completeall as specified and directed
M&L for preparation new plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.
M&L for preparation old plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.
Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Brickwork with old size flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
M&L for chequered coloured cement concrete tiles 30 cm x 30 cm x 25 mm thick, Heavy duty, Mechine presed, chemicaly treated set, jointed and pointed in neat cement slurry with grey cement and pigments in floor complete all as specified over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of 450 mm long complete all as specified and directed.
S&F in repair, PVC L/L cistern 10 lir capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified and directed.
S&F Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand including supply and fixing waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated fixed in repair complete all as specified and directed.
S&F in repair Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm chromium plated cast fixed in repair complete all as specified and directed.
S&F in repair fancy type chromium plated Angle valves, cast copper alloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed.
S&F in repair fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper aloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified and directed.
Dismantling water tanks exceeding not exceeding 500 litres capacity and removing to store complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (tripple layer White in colour cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions etc fixed in repairs complete all as specified and directed.
S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore complete all as specified and directed.
Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each resecuring, easing and adjusting and refixing in the same opening complete all as specified and directed.
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each complete all as specified and directed.
S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.
S&F flush shutter 35 mm thick, solid core construction, with block board core and both face covered with decorative face veneer with lipping/frame to match plywood face panels complete all as specified and directed.
S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.
S/F Extruded aluminium alloy handles, fabricated type, anodised 125 mm long complete all as specified and directed.
S&F extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed.
S&F in repair extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed.
S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S&F in repair extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S&F extruded aluminium alloy ,anodised ,sliding door bolt 150 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.
S & F butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed.
S&F 2nd class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I complete all as specified and directed.
Providing 30mm thick factory made 100% solid WPC (Wood polymer composite) Solid Plain/Prelam/Enrouted Plain/Enrouted Painted flush Door Shutter of required size comprising of Virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium carbonate and natural fibers (Wood Powders/rice husk/Wheat husk) and Non toxic additives made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650 Kg/cbm manufacture by an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw withdrawl strength of 2000 N (face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread flame of Class A category with Property of being Termite/Borer Free, Water/Moisture Proof, Fire Retardant and fixing with Stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. For WC/Bathroom/Toilet/Kitchen/Balcony Doors. complete all as specified and directed.
Providing and Fixing factory made 100% Solid WPC (Wood Polymer Composite)- Door frame of size 75mmx50mm made from wood Polymer Composite (Single Extruded process ) material comprising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium carbonate and Natural Fibers (Wood Powder/Rice Husk/Wheat Husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & Screwed with full body threaded star headed screws having minimum frame density of 780 Kg /cbm manufacture by an ISO 9001-2015 certified Company, having good screw holding capacity (Screw withdrawal strength of (Min 990N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/Moisture Proof & Fire retardant & Fixed in position with SS Draft Fasteners/Hold Fast of required dia and length for WC/Bathroom/Toilet and external uses complete all as specified and directed.
Providing & fixing double rebate ventilators fabricated from roll frame sections made galvanised steel color coated/powder coaated (base steel as per IS 513 'D' quality galvanised as per IS 277 with Zinc of 120gms/Sqm) with total coated thickness of 0.60mm. Paint specification : Coated section should be with primer coat of epoxy primer of 5-7 micron thick, finish painted with polyester paint of 12-16 micron thcik or powder coated with pure polyseter upto 50-60 micorn thick. Dimension of sections sections for frame should be of 72 x 55mm, section for mullions should be of 72mm x 50mm, section for shutter frame should be of 47mm x 20mm section for fixed glass bead should be of 12mm x 12mm and section for fly mesh should be of 40mm x 20mm Fixing details : Section for frame glazed shutter and wire mesh shutter should be cut to length and miter jointed with poly propylene corner brackets, mullion section should be joined with frame/mullion using mullion cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and fixed glass spoon Profile should be used around Fly mesh to fix mesh in mesh shutter. Accessories : Each Glazed shutter and mesh shutter should be provided with SS Pivot Hinges-1 set, secolor Handles & seccolor stay Window frame should be fixed to Brick/Concrete Masonary by using Nylon self expanding Caps and driving MS electroplated 80mm long screws into the caps through frame. the said rates are also inclusive of 5mm thick plain float glass & SS Wire mesh.
Providing & fixing 3 Track 2 Glass panel & 1 Mesh Panel sliding window fabricated from roll framed sections made of galvanised steel color coated/powder coated (base steel as per IS 513 'D' quality galvanised as per IS 277 with Zinc of 120 gms/Sqm) with total coated thickness of 0.58 mm or posder coated with pure polyester powder upto 50-60 micron thick sections for 3 track external frame should be of 44 x 107mm section for window glass shutter & wire mesh shutter should be of 35mm x 49mm section for shutter horizontal mullion should be 22mm x 60mm section for window euro groove should be 25 x 24mm (aluminium/Plastic) and section for window lap strip should be of 21 x 4mm (aluminium)) the window should be panel with 5mm thick float glass gaskets are to be made of Enthly Propylene danien Monomer (EPDM). Gasket corner bracket for internal and external frame made of polyproplene. Touch lock to be rpovided for window shutter, sections are to be cut to length, jointed and assembly by means of corner brackets. the above frame should be fixed to Brick/Concrete masonary by using Nylon self Expanding Cpas and driving MS Electroplated 80mm long screws into the caps through frames and complete allas specified and directed. The above said rates are also inclusive of 5mm thick plain float glass & SS wire mesh. complete all as specified and directed.
S & F Stainles steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters. complete all as specified and directed.
S & F in repair Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters including necessay arrangements like welding etc complete all as specified and directed.
S&F in repair mild steel window handle left/right 150 mm complete all as specified and directed.
S & F in repair mild steel window stay of minimum 200 mm length complete all as specified and directed.
S&F rubber beading to aluminium door / window / aluminium frame and like of best quality complete.
S&F in repair rubber beading to aluminium door / window / aluminium frame and like of best quality complete all as specified and directed.
Disconnecting existing tanks of capacity n.exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity exc 250 ltr but n.exc 500 ltr. complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engineer -in-charge.including dismantling old AC/CGI or any patteren old sheet and removing fron site. complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. including dismantling old AC/CGi or any patteren old sheet and removing fron site.
S&F Anodised aluminium snap grid of size 605mmX605mm frame work for false ceiling all as specified including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long .including dismantling old Frame of wooden or aluminum or any patteren old frame/grid and removing fron site. complete all as specified and directed.
Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre or E-ceiling or similar material Board for fixing in 600mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) including dismantling old AC/CGI/PVC/wooden or any patteren old sheet and removing fron site. complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.
Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of grade Fe-410 or E-250 complete all as specified and directed.
Supply&Laying of CPVC pipe, SDR 11 ,20mm outer dia & fittings on walls/ceiling or laying in floors including taking down old pipe complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single,(Single T) equal or unequal inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall inluding demolition of floor and taking down old floor trap and making good floor with matching floor in all respect complete all as specified and directed.
M&L PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement with exiting pipe including demolition /dismantling of old gully trap complete all as specified and directed.
Solid PVC Wall Lining consisting of 5mm thick wood grain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing .including dismantling old AC/CGI/PVC/wooden or any patteren old sheet and removing fron site. complete all as specified and directed.
5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing .including dismantling old AC/CGI/PVC/wooden or any patteren old sheet and removing fron site. complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.
M&L for 20 to 25mm thick machine cut Kota stone (550x550mm) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and Mirror polishing complete all as specified over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. Note:- Kota stone in S /case should be provided in single peice upto 1.5 m length
All as per above item No 92.00 but kota stone slab (100/150mm x 550mm) and 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed complete
M&L, 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & polishing complete including dismantling old stone /tiles fixed in any mortar and removing from site complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.
M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
S&F Machine pressed precast concrete interlocking paver block,grey and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade , Laid over 20mm thick sand cushine and 50mm thick PCC 1:2:4 type B-1 using 20 mm graded stone agg including demolition of existing tiles/pcc and removing from site .complete all as specified and directed.
Hacking out old broken glass exc 1.5 sqm (any thicknes, size and description) from wooden / metal frames glazed with putty or fixed with beads complete on any storey of the bldg. complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.
M&L for 50mm thick Plain Cement concrete type D- 2,1:4:8 (40mm gradedaggregate) as in sub base complete all as specified and directed.
M&L for one coat of synthetic enamel paint on wooden old surface inclding preparation of Surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.
M&L for one coat of synthetic enamel paint onsteel old surface inclding preparation of Surfaces of any description, over 10cm in width or girth,not otherwisedescribed
M&L, 15mm thick rendering in CM 1:4 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. Including complete all as specified and directed.
M&L applied a coat of bituminious primer confirming to [email protected] Kg per Sqm ,APP BASED POLYMERIC Memberane not less than 3 mm thick. Weighing not less than 3 Kg/m2, reinforcd with polyster non woven febric(weighing not less than 15 Gm/Sqm) and upperside of memberane thermally insulated with white mineral gravel finish, uniformly embedded during manufacturing process shall be laid dry torch application, side coverlaps shall be 75 mm and end slab shall be 100 mm and all over laps and joints shall also be sealed by torch application including one coat of bituminous aluminium paint complete all as specified and directed.
M&L cement concrete 1:2:4 mix type B-1 (20 mm graded stone aggregate) in padding all as specified of average thickness 50 mm in slope over roof complete all as specified and directed.
Screed bed or bedding layer or mortar 15mm thick in cement mortar 1:4 with WPC on roof surfaces complete all as specified and directed.
Excavating of any type soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits ,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed.
Surface dressing n exc 15 cm deep in soft loose soil complete all as specified and directed
Demolition and breaking up drain pipes 300mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement morter complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where complete all as specified and directed.
Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L Use and waste of timbering as planking and strutting for excavations in trenches in soil, including wales, struts, open poling boards, etc. as may be necessary and fixing and removal complete all as specified and directed.
M&L for 300mm dia , Reinforced concrete pipes, Class NP 3 with one collar per length of pipe complete all as specified and directed.
M&L for PCC( 1:4:8) using 20mm graded stone aggregate Concrete bed to drain pipes of size 300mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested. complete all as specified and directed.
M&L Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed.
M&L for leeds for above item of soil, not exc a total distance of 1.5 km cpmplete all as specified and directed.
Rolling and consolidating formation surfaces in cutting/filling with 12 Tone power Road Roller include filling depression which occur during rolling complete all as specified and directed.
M&L Granular Sub base 100mm thick Shingle or gravel spread, rolled and consolidated to gradient and camber required complete all as specified and directed.
M&L for 150mm thick WBM (compacted thickness), with granite or basalt coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.
M&L 150mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate) complete all as specified and directed.
S&F Stone sett flooring with stone setts of size 200 to 250mm long,150 to 200mm wide and 150mm deep and sides dressed and laid over 20mm thick screed bed of CM 1:3 jointing of stone sett shall not be width more than 25mm, same has been filled with CM 1:2 or PCC (1:1.5:3), type A0 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed.
S&F Edge stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 450mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed.
M&L for plain Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in foundation ,filling and mass concrete complete all as specified and directed.
Brickwork with old size birned bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed.
M&L for Plain Cement concrete (1:2:4) type B-1 using 20mm graded stone agregates as in surface channels and drains etc complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe , internal dian of pipe is 300mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.
M&L, 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement. complete all as specified and directed.
All as item No 130.00 above but in CM 1:4 complete all as specified and directed.
M&L for Providing precast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast cover slabs including use and waste formwork complete all as specified and directed.
M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
B B BUILDERS
Ajay Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .