Road Signage work at Lucknow-Mohan Road -SH-40- in Ch 20-000 to 29-750 in Lucknow District

S/f of Pavement Maker (Cat eye) Type X-ASTMD-4956-04 Avery Dennison/3-M (USA Make) consisting of ASA plastic housing fitted with tightly adherent plotting compound.The housing shall contain prismatic two glass covered prismatic reflective face to reflect incident light I/C all tax.

Providing and laying of hot applied thermoplastic compound 2.5mm. Thick including reflectorising glass beads @ 125 gms per sqm area, thickness of 2.5 mm. is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from streaks and holes.

Providing and laying of hot applied thermoplastic compound 5mm. Thick (Transfer Bar) including reflectorising glass beads @ 250 gms per sqm area, thickness of 5 mm. is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from streaks and holes.

Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting vide clause 801.3 fixed over aluminium sheeting 2mm. Thick witth area not exceeding 0.9 sqm. Supported on a miled steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm. below ground level as per approved drawing, complete. (90x90 cm.)

Tree Plates

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per 2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium she mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the g means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 6 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tes certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and lu shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resi years outdoor weathering and its having passed these tests shall be obtain International/Government Laboratory Institute by the manufacturer of the sheeting and in certificate is obtained from international condition, it should also be obtained from Indian condi 3 years of launching of product by the manufacture in abroad, Alternatively, a certificate cont ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from taboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if s could seek for a performance guarantee which would be released after receipt of certificate m requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends numerals and borders etc should be as per MORTH specification No-801.3.7 Proof of the sa of govemment report shall be uploaded while quoting tender SPEED LIMIT ( 60 cm Circular with difinitation plate (20cmx60 cm))

Stop sign in minor Roads (90 Cm High Octagon)

Object HAZARD ( 30x90 Cm)

CHEVRON 50x60 Cm

School/Hospital/Police Station Board

Accidental Caution Board (90 cm high octagon)

Please Enable Macros to View BoQ information