Repair/Maint all types of steel furniture of Md Accn and OTM Accn at Mil Stn Patiala under GE (S) Patiala

Amount

Locker Bed Side Steel (FD-1029/257)

Taking out of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape, size and as per Drg.

Taking out of unsv Butt Hinges and S&F New Butt Hinges complete as per existing shape, size and as per Drg.

Taking out of unsv Hasp and Staple and S&F New hasp and staples complete as per existing shape, size and as per Drg.

Taking out of unsv Hanging Rod of conduit Pipe and S&F New Hanging Rod with bracket complete as per existing shape, size and as per Drg.

Taking out of unsv /Rusted Shelves of Locker Bed side steel and S&F New Shelves dully Painted complete as per existing shape, size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape, size and as per drg.

Painting of Locker Steel complete inside and outside.

Almirah large steel with shelves (FD-67/351/1031)

Taking out of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape, size and as per Drg.

Taking out of unsv /Rusted Shelves and S&F new shelves dully Painted complete as per existing shape, size and as per Drg.

Taking out of unsv Lock and S&F New Lock with Duplicate Key complete as per existing shape, size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape, size and as per drg.

Painting of almirah large steel with shelves complete inside and outside.

Table office Clerk Steel (FD-84(M), 381, 307, 1104)

Taking out unsv Top and S&F New Top of Prelaminated Particle Board/MDF Board Exterior Grade 18mm one side Teak Face and other side white with 04 mm Teakwood beading all around it complete as per Drg.

Taking out of unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Taking out of unsv Drawer and S&F new Drawer of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg.

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/ PVC Shoes / Toes as per Drg.

Supply and fix back of box of table made out of 1.00mm thick MS sheet duly painted with a coat of pink primer as shown on drg and as directed and specified.

Supply and fix side of box of table made out of 1.00mm thick MS sheet duly painted over a coat of pink primer all as shown on drg and as specifed and directed

Painting of table office clerk as per Drg.

Table office officer steel (FD- 84(M), 1002, 1003, 306)

Taking out unsv Top and S&F New Top of Prelaminated Particle Board/MDF Board Exterior Grade 18mm one side Teak Face and other side white with 04 mm Teakwood beading all around it complete as per Drg.

Taking out of unsv Legs and S&F new Legs of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Taking out of unsv Drawer and S&F new Drawer of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg.

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes as per Drg.

Supply and fix back of box of table made out of 1.00mm thick MS sheet duly painted with a coat of pink primer as shown on drg and as directed and specified.

Supply and fix side of box of table made out of 1.00mm thick MS sheet duly painted over a coat of pink primer all as shown on drg and as specifed and directed.

Painting of table office officer as per Drg.

Table 3'x2' with/without Drawer Steel (FD-283,1008, 223, 310,1007)

Taking out unsv Top and S&F New Top of Prelaminated Particle Board/MDF Board Exterior Grade 18mm one side Teak Face and other side white with 04 mm Teakwood beading all around it complete as per Drg.

Taking out of unsv Legs and S&F new Legs of mild steel squre tube 25 mm as per existing shape and size.

Taking out unsv stiffner and S&F new stiffner of mild steel square tube 25 mm as per existing shape and size.

Taking out of unsv Drawer and S&F new Drawer of mild steel square tube 25 mm as per existing shape and size.

Taking out unsv Lock of Drawer and S&F new Lock as per Drg.

Taking out old unsv Shoes/Toes and S&F new Hard Rubber/PVC Shoes Toes as per Drg.

Painting of Table 3'x2' with/ without Drawer Steel as per Drg.

Tuck Welding

M&L for Joining the Broken Parts of steel Furniture by Tuck Welding all as Directed.

Chair CB With Arms (FD-75(M))

Taking out old unsv Seat and S&F New Seat as per Drg

Taking out old unsv Back and S&F New Back as per Drg

Taking out old unsv cleats and S&F new Cleats as per Drg.

Taking out old unsv hard Rubber/PVC Shoes and S&F new as per Drg.

Taking out old unsv arm rest and S&F new arm rest as per drg

Taking out old unsv pvc cap and S&F new as per Drg.

Applying two Coat of Synthetic Enamel Paint as per Drg.

Charpoy GI Pipe with 12mm thick plywood top (FD - 220) M&L for repairing of unsv parts and fixing new parts for items as mentioned below :-

Plywood top made out of 12mm thick commercial type BWR grade as per existing shape and size as per Drg complete all as directed by Engr-in-Charge.

S&F of long rails as per existing shape and size as per drg.

Conversion of long rails obtained from ser No 8.02 above into short rails as per existing shape and size as per drg.

Conversion of short rails obtained from ser No 8.03 above into legs as per existing shape and size as per drg.

GI elbow 3 way 32mm dia as per existing shape and size and as per drg.

Almirah small steel with shelves (FD-243/1032)

Taking out of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Taking out of unsv /Rusted Shelves and S&F new shelves dully Painted complete as per existing shape ,size and as per Drg.

Taking out of unsv Lock and S&F New Lock with Duplicate Key complete as per existing shape ,size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape,size and as per drg.

Painting of almirah large steel with shelves complete inside and outside.

Teapoy Verandah (FD-255/383)

Supply & fix MS conduit pipe of 20 mm bore as in short runner of Teapoy verandah by welding duly painted with a coat of pink primer after dismantling old broken/ unserviceable runner all as shown on drg and as specified and directed

All as per ser item No. 10.01 hereinbefore but long runner.

Painted the whole steel frame with enemle paint after the preparation of whole surface.

Supply & Fix 18/19mm thick pre laminated pratical board one side T/F other side white alongwith 4mm thick teak wood beading all around the top of tepoy verandah after dismantling old damage/unserviceable top all as shown drg all as specified and directed.

Supply & fix of leg shall be of 20 mm dia MS conduit pipe wall thick of 1.6 mm made of in U Shape

S&F hard rubber shoes to legs

Chair Verandah (FD-256)

M & L of Welding 'U' shape legswith arms of conduit pipes 20mm dia 16 gauge thick all as specified & shown on drg.

S&F hard rubber toes to legs

Preparation of old painted surfaces for painting to chair and apply one coats of white synthetic enamel paint to framed chair verandah complete all as specified

Recanning of verandah chairs with plastic cane (Oval Shape) 2mm wide and border with 4mm wide cane complete as per Godrej pattern using (Make: Shah/ Premier) brand cane (Removing of old broken cane shall be done at BSO Yard

Table steel 900x900x760mm (FD-1009)

S&F 18/19mm thick prelaminated particle board exterior grade (Make : Archid/ Greenply/ Novopan) with 6mm thick TW beading after dismantling old u/s runner all as shown on drg and as specifed and directed

Painting of Table steel 900 x 900x 760mm

Painting of steel furniture (FD-165(M), FD-77(M),78(M), FD-1038, FD-97/1023, FD/E6/MAP/01(R), FD-347,1043,86(M), FD-81(M), FD-107,124,125)

Table dining OR steel

Form with Back /without back

Rack steel 6 tier 1905x915x305mm

Rack steel 3 tier 990x915x475.5mm

Rack steel 3/4 space

Rack shoe steel.

Trestle store room steel

Stool Steel

Desk steel.

M/s Harmans