REPAIR AND MAINTENANCE OF INTERNAL WIRING AND ALLIED WORKS AT MH PATIALA 401 FD HOSP ECHS AND CONNECTED UNITS AT OLD CANTT AREA UNDER GE N PATIALA AT MIL STN PATIALA

Amount

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLS single core multi-stranded copper conductor for one light/fan and including PVC rigid concealed conduit medium grade 19/20 mm dia to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring)

All as per Sl item No 2 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper conductor for one light/fan in existing conduit to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed. (Switches and regulators shall be measured and paid for separately.) (Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring).

All as per Sl item No 6 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed.

All as per Sl item No 6 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per Sl item No 6 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 1.5 sqmm PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor complete all as specified and directed.

S& F Modular switch 1 way, 6 Amps, 1 module complete all as specified and directed.

S & F Modular switch 1 way, 16 Amps, 1 module complete all as specified and directed.

S & F Modular socket 5 pin 6 Amps, 2 module complete all as specified and directed.

S & F Modular socket 5 pin 6/16 Amps, combination type 2 module complete all as specified and directed.

S & F fan regulator modular type 2 module complete all as specified and directed.

S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals complete all as specified and directed.

S&F incl taking down wall mounted, Tube light fitting Self Ballasted LED Batten. Extruded Thermoplastic body with PC Diffuser in square LED Batten 18/20W 6500K of capacity ,20 watt,4 ft long incl 3 core flexible wire 0.5 sqmm copper cable all as specified and directed.

Supply and fix incl taking down 36/40 watt recessed mounted LED luminaire suitable for armstrong/grid ceiling with super bright LED fittings with connector block etc with short circuit protection , open protection , reverse polarity protection , high voltage protection complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S & F recessed Celing mounted 12w Slim round LED panel complete with driver and necessary connection complete all as speciifed and directed.

S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP42 protection complete all as specefied and directed. (Note: MCB should be B or C curve as directed by engineer in charge)

S&F MCB , SPN, 240 Volt , 40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCB should be B or C curve as directed by engineer in charge).

S&F MCB, single pole 240 volts 6 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. (Note: MCB should be B or C curve as directed by engineer in charge)

S&F MCCB DB VTPN 4 WAYdouble door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for ways with IP42 protection complete all as specefied and directed. (Note :- MCCB will be measured and paid under seperate item) (i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCBs in DBs without any extra cost, (ii) Electric rewriting should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.

S&F MCCB , TPN, 240 Volt , 100 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCCB should be B or C curve as directed by engineer in charge)

Earthing complete with galvanised steel earth plate electrode, 600x600 x 6.0mm thick buried directly in ground(earth pit not less than 2.25m deep below normal level) connected to galvanised earth lead wire 4.0mm dia (length povided up to 7.5 RM ) by means of nuts, bolts, & washers of GI as shown in electrical plate No 3 of SSR Part I. Connected to earthing test point testing complete including necessary earth pit chamber PCC 1: 3: 6 type C1, and 50mm thick RCC 1 : 2: 4 chamber cover and with 8mm dia mild steel re-enforcement of 15Cm C/C spacing both ways with a handle made of 8 mm bar for fitting, galvanised iron funnel, wire mash watering pipe GI 20 mm dia light grade, and earth lead shall be provided up to 7.5 RM with protection OF GI pipe light grade 15mm dia from the earth plate electrode, excavation, charcoal and common salt mixed refilling of soil etc complete all as directed.

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and directed. Note1: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost. Note2 : Two runs of 6 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 4 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 4 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and directed. Note1: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost. Note2 : Two runs of 4 sqmm cable alongwith one run of 4 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 2.5 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 2.5 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and directed. Note1: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.Note2 : Two runs of 2.5 sqmm cable alongwith one run of 2.5 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

Supply and fixing for sub main wiring two single core PVC insulated and unsheathed cable with 1.5 Sqmm multi -strand copper conductor drawing in PVC concealed conduit with 1.5 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and directed. Note1: Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.Note2 : Two runs of 1.5 sqmm cable alongwith one run of 1.5 Sqmm PVC insulated unsheathed copper conductor as earth wire, conduit and conduit accessories will be measured as one length).

M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRls ,stranded copper conductor cable drawn through exising surface/recessed steel/PVC conduit incl 4.0 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire all as specified and directed.

M&L for sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRls ,stranded copper conductor cable drawn through exising surface/recessed steel/PVC conduit incl 4 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire all as specified and directed.

M&L for sub main wiring with two single core 2.5 Sqmm PVC insulated and unsheathed FRls ,stranded copper conductor cable drawn through exising surface/recessed steel/PVC conduit incl 2.5 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire all as specified and directed.

M&L for sub main wiring with two single core 1.5 Sqmm PVC insulated and unsheathed FRls ,stranded copper conductor cable drawn through exising surface/recessed steel/PVC conduit incl 1.5 Sqmm PVC insulated unsheathed FR stranded copper conductor cable as earth wire all as specified and directed.

M&L for highly efficient LED SECURITY light 25 watt WITH BRACKET luminaries new generation energy saving & environment friendly with lens color temperature of 5000-6500K,> color rendering and LM80 test compliance made of pressure die cast aluminium alloy housing LM24 for gear and exturded alluminium lamp housing & enclouser with toughened glass with IP-66 of protection class,with high power LEDs as light source having luminous efficiency should be > 80Lm/w with active power factor correction (APFC) electronic gear (Heat shrink for better heat transmission) . It shall have epoxy powder coated grey finish phosphochromate treatment and operating voltage range should be fron 120 volt to 270 volt AC and frequency range 50Hz and suitable for an ambient temparature from -40°C to 50 °C and humidity level 10% to 90% including fitted on pole/building with GI bracket of suitable size bend to shape, including MS clamp of size of required size with all accessories and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings including taking down of u/s light fitting of any type/size complete all as specified and directed.

Supply and fix incl taking down new generation energy saving 9/10 watt LED OVAL shape outdoor bulk head INGRESS PROTECTION 54 made of plasitic housing with opal diffusing glass inc connection ,with flexible wire 0.5 sqmm copper cable complete all as specified and directed.

Supply and fix earth metal plug Box capacity 20 amp complete all as specified and directed.

M&L switch piano flush type single pole, one way 6amp complete all as specified and directed.

M&L switch piano flush type single pole, one way 15 amp complete all as specified and directed.

M&L socket outlet piano flush type 2 in 1 3 pin 5 amp complete all as specified and directed.

M&L socket outlet piano flush type 3 pin 15 amp complete all as specified and directed.

S/fix fan regulator electronic socket type complete all as specified and directed.

S&F modular white cover plate with frame, 1 module/2 module complete all as specified and directed.

S&F modular white cover plate with frame, 3/4module complete all as specified and directed.

S&F modular white cover plate with frame, 6 module complete all as specified and directed.

S&F modular white cover plate with frame, 8 module complete all as specified and directed.

S&F modular white cover plate with frame, 12 module complete all as specified and directed.

S&F Metal Flush boxes 1/2 module complete all as specified and directed.

S&F Metal Flush boxes 3/4 module complete all as specified and directed.

S&F Metal Flush boxes 6 module complete all as specified and directed.

S&F Metal Flush boxes 8 module complete all as specified and directed.

S&F Metal Flush boxes 12 module complete all as specified and directed.

M&L modular switch 1 way 6 A, 1 module complete all as specified and directed. Make :(as per existing fitment)

M&L modular socket, 6A-2/3 pin combined, 2 module complete all as specified and directed. Make :(as per existing fitment)

M&L modular switch 16 Amps, 1 module with indicator complete all as specified and directed. Make :(as per existing fitment)

M&L modular socket 16 Amps, 6 pin, 2 module complete all as specified and directed. Make :(as per existing fitment)

S&F modular fan step regulator, 120W - 1 module complete all as specified and directed. Make :(as per existing fitment)

S&F BUZZER DING DONG AC 230Volts single pole complete all as specified and directed.

u and v engineers and consultants

gurchan singh & sons.

m/s s.n. builders

AGGARWAL & CO

Arneja Builders

UNITED ENGINEERING CORPORATION