Reconstruction of High Level Bridge at Km.8/0 of Melkalavai-Bondhai road (via), Neganur, Aviyur across Thondi river

Amount

Earthwork excavation in all classes of soil and depositing on bank with all leads and lifts as per SS20B, including cost of all labour, equipments and all incidental charges such as baling our water, providing and maintaining necessary cofferdams, sheeting, shoring bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specification for FOUNDATION OF ABUTMENTS, PIERS as per MORT&H Vth Revision 304.

Earthwork excavation in rock not requiring blasting (SDR, Kankar / Soft rock) and depositing on bank with all leads and lifts as per SS20B, including cost of all labour, equipments and all incidental charges such as baling our water, providing and maintaining necessary cofferdams, sheeting, shoring bracing and their subsequent removal, removal of all logs, stumps, grubs and other deleterious matter and obstructions, trimming bottom of excavation backfilling, and clearing the site and disposal of all surplus materials etc., complete as per relevant standard specification for FOUNDATION OF ABUTMENTS, AND PIERS as per section 300 & 304 of MORT&H Specifications (Fifth Revision)

Vibrated plain Cement concrete M10 (Nominal mix 1:3:6) using 40 mm ISS graded metal including cost and conveyance of all materials to site and cost of cement at site including potable water, labour charges for mixing, transporting, laying compacting, curing concrete tools and plants and incidental charges such as baling out water, maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specification for LEVELLING COURSE BELOW FOOTING UNDER ABUTMENTS & PIERS. as per section 2100 of MORT&H Specifications (Fifth Revision)

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site excluding cost of steel including cost of formwork, soft water, labour charges for mixing, transporting, laying, curing concrete, working at depths, Tools and Plants and incidental charges such as baling out water, maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specifications for FOOTING UNDER ABUTMENTS & RETURN WALLS . as per section 2100, 1500, & 1700 of MORT&H Specifications (Fifth Revision)

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site excluding cost of steel including cost of formwork, soft water, labour charges for mixing, transporting, laying, curing concrete, working at depths, Tools and Plants and incidental charges such as baling out water, maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specifications for FOOTING UNDER PIERS . as per section 2100, 1500, & 1700 of MORT&H Specifications (Fifth Revision)

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site excluding cost of steel including cost of formwork, soft water, labour charges for mixing, transporting, laying, curing concrete, working at depths, Tools and Plants and incidental charges such as baling out water, maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specifications for ABUTMENTS & RETURN WALL SUBSTRUCTURE BELOW SILL LEVEL. as per section 1500, & 1700, 2200 of MORT&H Specifications (Fifth Revision)

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site excluding cost of steel including cost of formwork, soft water, labour charges for mixing, transporting, laying, curing concrete, working at depths, Tools and Plants and incidental charges such as baling out water, maintaining of protective bunds, cofferdams, shoring, strutting etc., complete as per relevant standard specifications for ABUTMENTS & RETURN WALL SUBSTRUCTURE ABOVE SILL LEVEL. as per section 1500, & 1700, 2200 of MORT&H Specifications (Fifth Revision)

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site, but excluding cost and fabrication of steel but including cost of form work, labour charges for mixing, transporting, laying, curing concrete, working at heights, soft water, hire charges for tools and plants including all other incidental charges etc., complete as per relevant standard specifications for BED BLOCK CUM DIRTWALL AND PEDESTAL OVER ABUTMENTS. as per section 1500, & 1700, 2200 of MORT&H Specifications (Fifth Revision)

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site, but excluding cost and fabrication of steel but including cost of formwork, labour charges for mixing, transporting, laying, curing concrete, working at heights, soft water, hire charges for tools and plants including all other incidental charges etc., complete as per section 1500, & 1700, 2200 of MORT&H Specifications (Fifth Revision) for PIERS BELOW SILL LEVEL

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site, but excluding cost and fabrication of steel but including cost of formwork, labour charges for mixing, transporting, laying, curing concrete, working at heights, soft water, hire charges for tools and plants including all other incidental charges etc., complete as per section 1500, & 1700, 2200 of MORT&H Specifications (Fifth Revision) for PIERS ABOVE SILL LEVEL

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrication of steel but including cost of formwork, labour charges for mixing, transporting, laying, curing concrete, working at heights, potable water, hire charges for tools and plants including all other incidental charges etc., complete for CAPPING BEAMS AND PEDESTAL OVER PIERS. as per section 1500, & 1700, 2200 of MORT&H Specifications (Fifth Revision)

Supplying and fixing of ELASTOMERIC BEARING of size 400X250X59 mm including cost and conveyance to work site, labour for fixing the bearing in position and all other incidental charges etc., complete. As per section 2000 of MORT&H specifications (Fifth Revision ) and IRC : 83-2015(Part -II)

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrication of steel but including cost of formwork, labour charges for mixing, transporting, laying, curing concrete, working at heights, soft water, hire charges for tools and plants including all other incidental charges etc., complete as per relevant standard specifications for T-BEAMS and CROSS BEAMS. as per section 1500, & 1700, 2200 of MORT&H Specifications (Fifth Revision)

Vibrated reinforced cement concrete M35 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrication of steel but including cost of formwork, labour charges for mixing, transporting, laying, curing concrete, working at heights, soft water, hire charges for tools and plants including all other incidental charges etc., complete as per relevant standard specifications for DECK SLAB AND KERB and FOOTPATH. as per section 1500, & 1700, 2200 of MORT&H Specifications (Fifth Revision)

Vibrated reinforced cement concrete M30 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrication of steel but including cost of formwork, labour charges for mixing, transporting, laying, curing concrete, working at heights, softwater, hire charges for tools and plants including all other incidental charges etc., complete for HAND RAILS AND POSTS. as per section 2703-3 of MORT&H Specifications (Fifth Revision)

Vibrated reinforced cement concrete M40 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrication of steel but including cost of formworm, labour charges for mixing, transporting, laying, curing concrete, working at heights, soft water, hire charges for tools and plants including all other incidental charges etc., complete for CRASH BARRIER ON INNER EDGE OF FOOTPATH. as per section 1500, & 1700, 2200 of MORT&H Specifications (Fifth Revision)

Providing and fixing of G.I. DRAINAGE SPOUTS 100mm dia as per GOI drawing SD/205 with grating arrangements at top as shown in the drawing and 100mm dia drainage spout projecting atleast 300mm beyond the bottom of deck slab as shown in the drawing, including cost and conveyance of Galvanished Iron pipes and flats and fixing them in position, etc., complete. as per section 2705 of MORT&H Specifications (Fifth Revision)

Vibrated Cement Concrete M15 (Nominal mix 1:2:4) using 40mm ISS metal, including cost and conveyance of all materials to site and cost of cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete, Tools and Plants and incidental charges etc., complete for CC PARAPET OVER RETURN WALLS as per section 1500, & 1700 of MORT&H Specifications (Fifth Revision)

Supplying and installation of STRIP SEAL EXPANSION joint system conforming to specification of Road and Bridge works Vth Revision ppublished by Ministry of Surface Transport (Roads Wing) in the 40mm wide expansion gap prodived in between decks over piers and in between deck and dirt wall over abutment with fatigue tested structural steel section at the nosing and anchorage assembly, including cost and conveyance of all materials, cost of testing as per the MORT&H Vth rev No.2600 specifications, including labour, equipment and incidental charges for fixng the joints complete in all respects, as per specifications.

Vibrated Cement Concrete M15 (Nominal mix 1:2:4) using 40mm ISS metal, including cost and conveyance of all materials to site and cost of cement at site including all labour charges for mixing concrete, laying, hire charges for Tools and Plants, compacting, curing with all leads for soft water, including all other incidental charges for form work etc., complete, for FOOTPATH RAMP AND BASE COURSE BELOW APPROACH SLAB. as per section 1500, & 1700, 2704 of MORT&H Specifications (Fifth Revision)

Vibrated reinforced cement concrete M30 (Design mix) using 20 mm ISS HBG graded metal including cost and conveyance of all materials to site and cost of cement at site but excluding cost and fabrication of steel but including labour charges for mixing, transporting, laying, curing concrete, working at heights, soft water, hire charges for tools and plants including all other incidental charges etc., complete for APPROACH SLABS. as per section 1500, & 1700, 2704 of MORT&H Specifications (Fifth Revision

Vibrated Cement Concrete M30 (Design mix) 75mm thick, using ISS HBG graded metal including cost and conveyance of all materials to work site including cost of cement at site including all labour charges for mixing concrete, laying, hire charges for Tools and Plants, compacting, curing with all leads for softwater, including all other incidental charges formwork, cost of premoulded expansion joints, and fixing the same in position etc., complete for WEARING COAT OVER DECK SLAB AND APPROACH SLAB. as per section 2702.2 of MORT&H Specifications (Fifth Revision)

Providing and fixing Class I PVC seepage pipes of 110 mm dia of required lengths for abutments and wings including costs and conveyance of all materials to work site and labour charges for fixing etc., complete to drain the backfill. as per section 2706 of MORT&H Specifications (Fifth Revision)

Providing filter media behind the abutments and wings for 600mm thick using filter material as per Appendix 6 of IRC : 78-2014, well packed with smaller sized towards the soil and bigger size towards the wall including cost and conveyance to work site including all labours and other incidental charges etc., complete. as per section CI.710.1.4 & Appendix -6 of IRC : 78-2014

Filling behind Abutments and Wings with clean gritty gravel having ϕ value more than 35º including cost and conveyance of gravel to worksite, laying, handling charges and filling in layers, tamping under optimum moisture content to get the maximum density including watering, with all leads for water and all other incidental charges etc, complete for as per section CI.710.1.4 & Appendix -6 of IRC : 78-2014

Supply and fabrication of Fe-500 steel required for all RCC items of works involved in the schedule, including cost of steel at site and cost of fabrication labour charges for cleaning the rods, straightening, cutting, bending, tying grills, including over laping to the required length wherever necessary and providing to the reinforcement placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete. as per section 2706 of MORT&H Specifications (Fifth Revision)

Supply and fabrication of Fe-240 steel required in the schedule including cost of steel at site cost of providing and cost for fabrication, labour charges labour charges for cleaning the rods, straightening, cutting, bending, tying grills, including over laping to the required length wherever necessary and providing to the reinforcement, placing the reinforcement in position as specified in the drawings including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc., complete, FE-240 grade for Mesh Reinforcement.

Supply and fixing of High Quality of PVC pipes of 150mm dia.. Including cost and conveyance of pipes to the site and fixing in position to proper grade and level, including labour charges for fixing and including all other incidental charges etc complete., for proving utility services in footpaths.(150 mm dia)

70 mm dia

DIVERSION ROAD

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines , grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 2km for formation of Diversion Road. 95% Compaction

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines , grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 2km for formation of Diversion Road. 97% Compaction

Construction of Granular sub-base Grade-V by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) 250mm thick each layer 125mm thick specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

Providing and laying of prime coat using Emulsion at the rate of 7 Kg per ten square meter over the WMM surface preparatory to another bituminous construction over it.

Proivding and laying of Tack coat using Emulsion Bitumen at the rate of 2.50kg/sq.m over the promer treated WBM surface preparatory to another construction over it.

Providing and laying Bituminous Macadam (BM) 50 mm thick using 0.35 cum of 37.50-13.2mm metal 0.45cum of 13.20mm-2.36 and 0.20cum of 2.36mm and below metal, 0.025m3 Stone dust and 69kg of 60/70 grade Bitument for 10m2 of 70mm thick for premixing per 10sqm including coat and conveyance of all materials to CMP site including heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 tones capacity, conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 90mm/130mm with mechanical paver to the specified grades and cross sections compaction by power roller to the required density etc., including labour for loading bitument into bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20-30t, CMP with bitument boiler ,tipper trucks, paver finisher, power roller and all other Tools and plants required, including all other and incidential charges etc., complete as per Specification.

Providing and laying Bituminous Concrete to 30mm thick using 0.13cum of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 30mm with mechanical sensor paver finisher to the specified grades and cross sections and consolidatedby8-10tonne Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9m paver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5

Supply of NP3 class RCC pipes 1000mm dia.pipes supplied by the contractor at his own cost specified below confiming to IS 458/1989cost of pipe as a finishedwork including all other incidental charges, testing charges including loading and unloading transport and delivery in good condition at work siteas directed by the departmental officers etc., complete for culvert.

Hositing and fixing of 1000mm dia.NP3 pipes to proper gradient including all labour charges and all other incidental charges etc., complete for culvert

APPROACH ROAD

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines , grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 2km for formation of Approach Road. 95% Compaction

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines , grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 2km for formation of Approach Road. 97% Compaction

Construction of Granular sub-base Grade-V by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.

Providing and laying spreading and compacting graded stone aggregate to Wet Mix Macadam(WMM) 250mm thick each layer 125mm thick specification including premixing the material with water at OMC in machanical mix plant carriage of mixed material by tipper to site laying in uniform layers 250mm thick with pavers in SubBase/Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material,labour charges, rentals for machinery, fuel and all other incidental charges etc., complete.

Providing and laying Prime coat over WMM surface using 7.00 kg. of Emulsion bitumen (S.S-1) per 10 sqm. for prepatory to another bituminous construction over it, including cos of material, labour charges, rentals for machinery, fuel and all other incidentals charges etc., complete as per clause 502 of MORTH Rev-5.

Providing and laying Tack coat over WMM surface (treated with primer) using 2.50 kg. of Bitumen Emulsion (RS-1) per 10 sqm. for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 503 of MORTH Rev-5.

Providing and laying Bituminous Macadam (BM) 50 mm thick using 0.35 cum of 37.50-13.2mm metal 0.45cum of 13.20mm-2.36 and 0.20cum of 2.36mm and below metal, 0.025m3 Stone dust and 69kg of 60/70 grade Bitument for 10m2 of 70mm thick for premixing per 10sqm including coat and conveyance of all materials to CMP site including heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 tones capacity, conveying the mix by tipper trucks to paver site,spreading the mix in required temperature for uniform thickness of 90mm/130mm with mechanical paver to the specified grades and cross sections compaction by power roller to the required density etc., including labour for loading bitument into bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20-30t, CMP with bitument boiler ,tipper trucks, paver finisher, power roller and all other Tools and plants required, including all other and incidential charges etc., complete as per Specification.

Providing and laying Bituminous Concrete to 30mm thick using 0.13cum of 19.00-9.50mm, 0.17cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of VG30 bitumen for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 30mm with mechanical sensor paver finisher to the specified grades and cross sections and consolidatedby8-10tonne Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher/9m paver finisher, Vibratory/Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5

Excavation including removal and satisfactory disposal of all materials necessary for the construction of road way and side drains in accordance with specifications and the lines , grades and cross sections shown in the drawings or as indicated by the Engineer for Carted Eath with a lead of 2 Kms. for formation of Approach Road.

RCC RETAINING WALL 7.0 M HT

Earth work excavation in al classes of soil except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS208, including cost of all labour, equipments and all other incidental charges such as bailing out water providing and maintaining necessary cofferdams, sheeting, shoring, bracing, and their subsequent removal, removal of all logs, stumps and other deleterious matter and constructions, trimming bottom of excavation backfilling, and clearing the sits and disposal of all surplus materials etc, complete as per relevant standard specification for FOUNDATION OF RETAINING WALLS.

Vibrated Cement Concrete of Grade M-15, Nominal Mix, 1:2:4 using 40mm ISS HBG metal including cost and conveyance of all materials to site including cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete, working at depths, Tools and Plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification, etc, complete as per relevant standard specification for BASE COURSE BELOW FOOTINGS OF RCC RETAINING WALLS.-1 Cum.

Vibrated reinforced cement concrete M30 grade, Design mix, using ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete as per standard specifications for FOOTING OF RETAINING WALLS. -1 Cum (For Estimate Purpose, mix (1:1.2:2.4)

Vibrated reinforced cement concrete M30 grade, Design mix, using ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete as per standard specifications for STEM RETAINING WALLS. Below Ground level

Vibrated reinforced cement concrete M30 grade, Design mix, using ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete as per standard specifications for STEM RETAINING WALLS. Above sill level

Providing and fixing seepage pipes of 100mm dia. PVC pipes of requied lengths for abutments and wngs including cost and conveyance of all materials to work site, cost and labour for 900mm dia. semi-spherical back fill arangements with 100mm size broken ganite chips at the periphery and labour charges for fixing, etc.,to drain of the backfill IN BETWEEN THE ABUTMENTS AND WINGS, -

Supply and Fabrication of High Yield Strength Deformed Bar with Grade Designation Fe-500, conforming to IS:1786-1985, steel required for all RCC items of works involved in the schedule cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlaping to the required length wherever necessary and placing the reinforcement in position as specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc, complete,Fe-500 grade.

PAINTING

Painting two coats with approved Cement Paint over the priming coat surface using first class cement paint over the cement plastered surface including cost and conveyance and all labour charges for cleaning, preparing the surface painting and curing all etc., complete.

Painting two coats with ready mix Plastic Emulsion Paint using first quality plastic enamal paint over the priming coat surface over the cement plastered surface including all cost and conveyance and all labour charges for cleaning, preparing the surface, painting and curing etc., complete.

REVETMENT ALONG THE BUND

Earthwork excavation in all classes of soils except hard rock requiring blasting and deposting on bank with all leads and lifts as per SS20B including cost of all labour, materials,tools, equipments and all incidental charges and sheeting, shoring and bracing and thier subsequent removal of all logs, stumps and other deleterious matter and obstrutions, trimming of bottom of excavation back filling, clearing up the site and disposal of all surplus materials etc., complete as per MORTH N.304 for foundation of Toe walls.

Vibrated Cement Concrete of Grade M15 (Nominal Mix 1:2:4) using 40mm ISS size HBG metal including cost and conveyance all materials to site including cost and labour chagrges for form work and cetering, labour charges, compacting, curing and all incidental charges etc., complete for Foundation concrete of Toe wall and Stem of Toe wall as per MORT&H specification No.1000,1500,17000&2200

Gravel backing to revetment for 150mm thick, including cost and conveyance of gravel to worksite, laying, and filling in layers, of 150mm thick, tamping, including watering with all leads for water and all other incidental charges etc, complete.

Providing and fixing of Precast CC blocks on slopes (300mm thick) for earth protection complete as per drawings or Tech specification clause 2500 and directed by engineer.

RCC RETAINING WALL 5.26 M HT

Earth work excavation in al classes of soil except hard rock requiring blasting and depositing on bank with all leads and lifts as per SS208, including cost of all labour, equipments and all other incidental charges such as bailing out water providing and maintaining necessary cofferdams, sheeting, shoring, bracing, and their subsequent removal, removal of all logs, stumps and other deleterious matter and constructions, trimming bottom of excavation backfilling, and clearing the sits and disposal of all surplus materials etc, complete as per relevant standard specification for FOUNDATION OF RETAINING WALLS.

Vibrated Cement Concrete of Grade M-15, Nominal Mix, 1:2:4 using 40mm ISS HBG metal including cost and conveyance of all materials to site including cement at site including cost of formwork, soft water, labour charges for mixing, transporting, laying and curing concrete, working at depths, Tools and Plants and incidental charges such as maintaining of protective bunds, cofferdams, shoring, strutting etc; complete as per relevant standard specification, etc, complete as per relevant standard specification for BASE COURSE BELOW FOOTINGS OF RCC RETAINING WALLS.-1 Cum.

Vibrated reinforced cement concrete M30 grade, Design mix, using ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete as per standard specifications for FOOTING OF RETAINING WALLS. -1 Cum (For Estimate Purpose, mix (1:1.2:2.4)

Vibrated reinforced cement concrete M30 grade, Design mix, using ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete as per standard specifications for STEM RETAINING WALLS. Below Ground level

Vibrated reinforced cement concrete M30 grade, Design mix, using ISS size hard granite broken graded metal including cost and conveyance of all materials to site and cement at site excluding cost and fabrication of steel but form work and centering soft water labour charges for mixing, transporting, placing in position, vibrating and compacting finishing and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges, etc., complete as per standard specifications for STEM RETAINING WALLS. Above sill level

Providing and fixing seepage pipes of 110mm dia. PVC pipes of requied lengths for abutments and wngs including cost and conveyance of all materials to work site, cost and labour for 900mm dia. semi-spherical back fill arangements with 100mm size broken ganite chips at the periphery and labour charges for fixing, etc.,to drain of the backfill IN BETWEEN THE ABUTMENTS AND WINGS, -

Supply and Fabrication of High Yield Strength Deformed Bar with Grade Designation Fe-500, conforming to IS:1786-1985, steel required for all RCC items of works involved in the schedule cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlaping to the required length wherever necessary and placing the reinforcement in position as specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc, complete,Fe-500 grade.

Sub Total Bid Price (in figures)

GST @ 12% of above all Schedules (in figures)

J SENTHILKUMAR

Selliamman constructions