8333 REPAIR TO JOINERY FLOORING CEILING SANITATY PLUMBING ETC AND CERTAIN BR WORKS IN CERTAIN BLDG IN AREA OF AGE BR II UNDER GE (CENTRAL) PUNE

Amount

Taking down shutters of any descriptrion area exc 1 Sqm but not exc 2 Sqm each all as specified and as directed.

Taking down Shutters of any description area not exc 1 Sqm each and refixing in the same opening after carrying out necessary adjusting / minor repairs etc all as specified and as directed

All as pere item No 2 above but area exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.

Taking down Chowkhats or frames area not exc. 1.5 Sqm each and making good disturbed portion of jambs with PCC 1:3:6 type C1 using 20mm graded aggregates including plastering, finish as required etc as directed.

All as per item No 4 above but area exc 1.5 Sqm and not exc 4 Sqm each and making good disturbed portion of jambs with PCC 1:3:6 type C1 using 20mm graded aggregates including plastering, finish as required etc as directed.

Taking down chowkats or frames with shutters (Without taking off shutter from the frame) area not exc 1.50 Sqm each and making good disturbed portion of jambs with PCC 1:3:6 type C1 using 20mm graded aggregates including plastering, finish as required etc as directed.

Taking down chowkats or frames with shutters (Without taking off shutter from the frame) area exc 1.50 Sqm but not exc 4 Sqm each and making good disturbed portion of jambs with PCC 1:3:6 type C1 using 20mm graded aggregates including plastering, finish as required etc as directed.

S & F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified.

All as per as item No 8 above but 105 x 60mm

M & L for Cement concrete 1:3:6 type C1 (using 20mm graded stone aggregates) for filling of pressed steel door frame and hold fast block cutting etc complete

Supply and fixing 35mm thick 2nd class hardwood factory made plain framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS: 1003 ( Part -I) kiln seasoned and chemically pressure treated. complete fixed to chowkats all as specified.

S & F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete as directed

Supply and fixing factory Made 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified.

S & F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg given on page 176 of SSR 2020 Part II The width of stiles and rails shall be as specified in para 8B.2.1 on page 145 of SSR 2020 part II. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.

S & F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 gauge complete all as shown in sketch on page 180 of SSR 2004 Part II complete all as specified and directed.

S & F powder coated aluminium window shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/Mtr etc with including 4.8 mm thick selcted quality glass for glazing and stainless steel wire cloth 0.71 mm dia with width of aperture 1.18 mm complete with including of necessary hardware i.e. locking mechanism, handle , including necessary gasket / neoprene / rubber packing / beading etc all as specified and directed

S & F louvers glass ventillators with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading and all necessary fittings as required etc complete all as specified and as directed. (a) SP 20048 (b) Glazing clips 19352

S & F 150mm extruded aluminium alloy powder coated handles fabricated typeall as specified and directed.

S & F Aluminium anodised powder coated barrel tower bolt of extruded section 150mm long all as specified and directed.

S & F butt hinges 100mm, medium weight, cold rolled, mild steel complete all as specified and directed.

S & F for 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair aluminium powder coated curtain rails 25mm dia with rings @ 10cm c/c etc complete all as specified.

S & F in repair aluminium powder coated brakcet, knobs,complete all as specified.

Supply and fixing in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified and directed.

Supply and fixing in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm all as specified.

Supply & fixing in repair aluminium alloy sliding door bolts with hasp and stapple (bolt type) and fxing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long all as specified.

S & F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc. all as specified and directed.

M & L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer all as specified and directed.

M & L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing rubbish off the premises complete all as directed

M & L for 100mm thick cement concrete type D-2 1:4:8 using 40mm graded stone aggregate as in levelling course / sub base complete all as specified.

M & L for 50mm thick cement concrete type B-1 1:2:4 using 20mm graded aggregate levelling course complete all as specified.

M & L for 25mm thick cement concrete type B-1 1:2:4 using 20mm graded aggregate levelling course complete all as specified.

Material and labour Virified Ceramic tiles Double charge light shade (square/ rectangular) polished, of size 600mm x 600mm x 10mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over & including 15mm thick screed bed in CM (1:6) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

Material and labour Virified Ceramic tiles Double charge (light shade) of size 600mm x 600mm x 10 mm thick (square/ rectangular) polished, as in skirting, set and jointed in neat cement slurrry and pointed in white or coloured cement to match, over & including 10mm thick backing coat in CM (1:4) all as directed and specified.

Material and labour for Non skid coloured ceramic tiles of size 600mm x 600mm x 10mm thick (Square / rectangular) over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

Material and labour for Non skid coloured ceramic tiles of size 400mm x 400mm x 7 to 8mm thick (Square / rectangular) over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles all as directed and specified.

M & L for coloured glazed ceramic tiles of size 450 x 300 x 7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:4 complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid with any mortar etc and removing rubbish off the premises complete all as directed.

M & L 20mm thick granite (of any type) work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms, floor / skirting / risers or as in vertical support or counter top for wash basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite over and including 15 mm thick screed layer in CM 1:3 with edges polished / rounded as ordered incuding cutting circular or eliptical hole in granite slab and fixing in position complete and ensure best adhesion to surface complete all as specified and as directed.

M & L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

M & L for 50mm thick cement concrete type C-1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

Dismantling of AC sheet corrugated, or semi corrugated in roof covering complete.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings in roof covering.

S & F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls cladding etc fixed with L-type or J-type or cranked hook bolts complete as specified and directed

S & F 6mm thick asbestos cement two piece adjustable plain wing ridge fixed with L-type or J-type or cranked hook bolts complete as specified and directed

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of required colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of required colour having tensile strength of 550 Mpa as in ridge valley,gutters,bridge board,roof covering / cladding to wall, bent to shape as required and directed fixed with self tapping screws all as specified and directed.

M & L for rendering 10mm thick in cement mortar 1:6 on brick / concrete surfaces finished even & smooth with a thin layer of sagol finish in patches work including taking down cement or cement lime plaster, any description, on brick or stone walls, etc complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) surface finished with sponge finish in patches work including taking down cement or cement lime plaster, any description, on brick or stone walls, etc complete all as specified and directed

M & L preparation of newly plastered surfaces of walls of any description and applying two coats of oil bound distemper over one coat primer by mechanical means over 2mm thick wall care putty complete all specified and directed.

Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash all as directed and specified.

Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint on wall all as directed and specified.

Dismantling of boarding, any description fixed in any position with nails i.e. in cupboard shutters, partitions, false ceiling and wall lining etc and similar position fixed with screws complete.

S & F Anodised aluminium powder coated grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long with including 8mm thick one side prelaminated Gypsum ceiling board of as approved including applying tree coats of white wash complete with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling.

S & F Anodised aluminium powder coated snap grid framed work of size 600mm x 600mm for false ceiling and including suspended hangers 6mm dia G.I (upto 1200mm long) adjusting level fixed to roof slabs/purlin/rafter with the help of cleats made out of G.I flat 40 x 3mm of size 60mm long and expansion hold fastener 12.5mm dia 40mm long complete with following aluminium anodised sections :- (a) Main and cross Tee shall be of size 36.5mm x 23.5mm x 1.5mm thick and 23.5mm x 23.5mm x 1.28mm thick respectively and jointed at junction/crossing with aluminium anodised angle bracket of size 15mm x 15mm x 1.5mm thick weighing 0.12 Kg/RM fixed with suitable M.S bolt, Nuts & washers as per manufaturere's insructions . (b) The snap grid (Main / Cross Tee) section shall be suported at the end along the wall with aluminium anodised angle of size 40mm x 25mm x 2mm thick weighing 0.36 Kg/RM. (c) PVC protcted sheeting shall be used to avoid scraches, damages to frame work while fixing to ceiling. Note:- ceiling board will be measured & paid separately

M & L for 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish complete all as specified and as directed Note : - Frame work for ceiling shall be measured and paid separately

Supply and fixed in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S & F in repair vitreous china squatting pan "ORISSA" pattern size 580mm x 440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap (but excluding flushing cistern and flush pipe) includintg cement concrete bedding , with and etc. including making good to floor, complete all as specified

S & F in repair vitreous china pedestal pattern, white with including cast iron 'P' or 'S' trap and connection to trap , fixing bolts, seat cover and jet spray etc. including making good to floor, complete all as specified

Supply and Fix in repairs vitreous china Wash hand basin flat back, size 650 x 400mm white excluding pillar taps & waste pipe but including Waste coupling chromium plated and fixing brackets complete

S & F in repairs fancy type, chromium plated, bib tap, cast copper alloy with crutch or butter fly handle ,incl wall flange, screwed down,screwed for iron pipe 15 mm bore or brass ferrule complete all as specified and directed.

S & F in repairs Angle cock 15mm bore fancy type, chromium plated with wall flange cast copper alloy, screwed down , high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs Stop cock 15mm bore (Long shank Concealed type) fancy type, chromium plated cast copper alloy, screwed down , high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete

S & F in repair PVC connection 15 mm of size with PTMT nut of length 450 mm.

Supply and Fix in repairs Pillar tap 15mm bore, cast copper alloy, with capstan heads, fancy type , chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as directed and specified .

S & F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as directed and specified

Supply and Fix in repairs vitreous china half stall type urinals, with fixing accessories, including PVC down waste pipe, fixing plugs etc (but excluding flushing cistern and flush pipe) and fix to walls and connect complete including supply and fixing of urinal spreader complete all as specified and directed.

S & F in repair Stainless steel plate rack of size not less than 900 x 900 mm made out of sheet grade SS-304 thickness not less than 0.63mm approved quality finish complete all as specified and directed.

S & F in repair health faucet conforming to Parryware Cat Part No T9803A1 Coral or equivalent make as given in Appdx 'A' with Hose & Hook complete all as specified and directed.

S & F in repair regular white seat cover for EWC neutral, warm & Bright conforming to Parryware Cat Part No E8309 or equivalent make as given in Appdx 'A' complete all as specified and directed.

S & F in repair Wall Mixer Non Telephonic conforming to Parryware Cat Part No G4741A1 or equivalent make as given in Appdx 'A' complete all as specified and directed.

S & F in repair Two-way Bib Cock conforming to Parryware Cat Part No T3534A1 or equivalent make as given in Appdx 'A' complete all as specified and directed.

S & F in repair Two-way Angle Valve conformimg to Parryware Cat Part No T3543A1 or equivalent make as given in Appdx 'A' complete all as specified and directed.

M & L for GI tubing 15mm bore dia medium grade concealed including all fittings such as bend, elbow, union, tee, short pieces etc fixed to walls, ceilings or laid in floors including cutting chases, pinning in brick/concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 including taking up or down old steel water tubing and connections complete all as specified.

All as per item No 83 above but 20mm bore dia

S & F in Repair sensor kit of wash basin and urinal of any description / make including make it functional complete all as directed.

Maintenance and petty repairs of buildings by day to day Maintenance (complaints pertaining to joinery works) by attending daily complaints lodged by the users through IVRS/ mobile/ SMS or email and manual registration of complaints at B&R sub division / complaint cell on all working days (except sunday national holidays and closed holidays) by deploying one carpenter all as directed by Engr-In-Charge

Maintenance and petty repairs of buildings by day to day Maintenance (complaints pertaining to water supply works only) by attending daily complaints lodged by the users through IVRS/ mobile/ SMS or email and manual registration of complaints at B&R-II sub division/ complaint cell on all working days (except sunday national holidays and closed holidays) by deploying one plumber all as directed by Engr-In-Charge.

Note for item No 86 & 87 above (i) Each complaint shall be attended within 24 hours from task assign to tradesman by JE/Engr-In-Charge. (ii) If the tradesman not attended complaint within time frame as directed by the Engr-In-Charge @ 50% of the quoted rate shall be deducted as penalty for first 24 hours delay and @10% for subsequent 24 hours delay. (iii) The contractor shall be responsible to maintain records for daily job completed by the traedsman deputed by him and obtain the signature JE or Engr-in-Charge. Record for the same shall be submitted by while RARs/Final Bill (iv) The Uinit "Each Job" mentioned in column 4 means each complaint slip . Each complaint slip shall contained of one or more complaints but not more than three complaints. Contracor shall quote rate accordingly and nothing exta payment admissible on this account.

M & L for UPVC window of required sizemade out of UPVC sheet of wall thickness 1.2mm ± 0.25mm made out of extruded section plain / coloured UPVC sections. The window frame made out of rigid UPVC sections meter cut at 4 corners & joint with plastic fusion welding with internal reinforced required. The shutter section made out of extruded rigid UPVC with internal reinforced with provision of 5mm glazed wire mesh as per requirement and manufacturer's instruction. The window shall be fixed to the wall using 65 x 100mm long M.S. fasteners at suitable place provided for each vertical and horizontal member etc. complete with inclusive of 3mm thick fibre glass and stainless steel wire cloth and allied sliding arrangement, locking arrangement & handle slot etc complete as per manufacturer’s specification and direction of Engineer-in-charg

M & L in repair UPVC doors with frame of required size made out of UPVC sheet of wall thickness 1.2mm ± 0.25mm made out of extruded section plain / coloured UPVC sections. The door / shutter frame made out of rigid UPVC sections meter cut at 4 corners & joint with plastic fusion welding with internal reinforced required. The shutter section made out of extruded rigid UPVC with internal reinforced with provision of 5mm glaze wire mesh as per requirement and manufacturer's instruction. The frame shall be fixed to the wall using 65 x 100mm long M.S. fasteners (at least 04 places on each side) at suitable place provided for each vertical and horizontal member etc. complete with inclusive of 3mm thick fibre glass / PVC board (min 5mm thick) and stainless steel hinges 100mm size at least 03 Nos per shutter and allied sliding arrangement, locking arrangement & handle slot etc complete as per manufacturer’s specification and direction of Engineer-in-charge.

M & L in repair PVC prelaminated factory made cupboard shutter of 18 mm thick approved colour / shed and quality made out from PVC one side prelaminated sheet. The exposed edges shall be sealed with PVC edge beading of SME shed and colour. The shutter shall be fire retardant having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws and one magnetic catcher of aproved quality for each box / cupboard slot complete all as per direction of Engineer-in-charge Note : Measurements shall be taken for full body parts differently in Sqm

M & L for seven stage cleaning and sterilization of inside overhead service tank capacity 500 Ltr through bacteriological treatment by using TEBAC GS, TARBAC-G-65 AND ULTRA VIOLET RAY. Seven Stages are as under :- 1. First stage to drain out the water by using exit valve or high capacity dewatering system. 2. Second stage is cleaning all the algae formation inside the tank by using TERBAC G10 a laboratory tested branded chemical of the company and scrubbing the walls of the tank. 3. Third stage is fresh water cleaning by high speed jet pump. 4. Forth stage and first bactria screeding is decertification by using TERBAC-G5 a Govt laboratory certified branded halogen compound. 5. Fifth stage is cleanng the floor of water tank by industrial vaccume cleaner. 6. Sixth stage is the second bactria screening and sterilizing method by using ultra violet ray within tank and kills all suspended bacteria. 7. Seventh stage of cleaning and third bacteria screening is to sterilize the floor of the water tank by using laboratory certified, branded strong oxidizing agent TERBAC-G65.

All as per ser item No 93 above but for inside overhead service tank capacity 1000 Ltrs complete all as specified and as directed

All as per ser item No 93 above but for inside overhead service tank capacity 2000 Ltrs complete all as specified and as directed

Note for Item No 93 to 95 : (i) Cost of staging and necessary working platform shall be deemed to be included in quoted rate (ii) Contractor shall insured necessary safety precautions and insurance to workers during execution (iii) The quoted rates shall be deemed to be included the cost of writing date of cleaning, due date and capacity of tank on the wall surface of the tank (iv) Duration of cleaning shall be 6 months

Supply and fixing stainless steel wire 0.71mm dia fixed with tinned tacks average width of aperture 1.18mm complete all as specified.

M/s Asrani and sons

R K CONSTRUCTION AND ENGINEERING

Gauri Associates

durga consrtruction

MANIYA CONSTRUCTION CO

L.T Associate