SPECIAL REPAIR TO JCO LIVING ACCN BLDG NO T 503 T 504 TC 85 OR COOK HOUSE AND DINNING HALL OF 913 LT AD REGT WKSP (SP) AT HISAR MIL STN UNDER GE HISAR

Amount

Taking down chowkats or frame with shutter, without taking off shutter from the frames not exc 1.5 Sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each and making good the hold fast notch / disturbed portion with PCC 1:3:6 type C1 (20mm graded aggregates) complete

S&F factory made mild steel windows (Box Type ) with side hung shutters including glazing bars to receive glass, dovetailed or welded with and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg complete all as specified and directed by Engr-in-Charge.

S&F factory made mild steel windows (Box Type ) with side hung shutters without glazing bars but including sash bars to receive wire gauge, dovetailed or welded with and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg complete all as specified and directed by Engr-in-Charge.

M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings,bracket for truss with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like completed all as directed by Engineer-in-charge.

M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane as directed by Engr-in-Charge.

S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples

S&F welded steel wire fabric complete, weight not exc 4 Kg per sqm and fixed to wood or steel members.

S&F factory made single extruded WPC(Wood polymer compsite)solid door window/ceosetory windows& othr frames/chowkats of size 65x100mm comprising of virgin PVC polymer of K value 58-60(suspension grade calciumcarbonate and natural fibers (wood powder/rise husk0 and non toxic additives (maximum toxicity index of 12 for 100gms fabricated with miterd joints after applying with PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum,screw withdrawl strength of 2200N (face) & 1100N (edge) ,minimum comp ressive strength of 58 n/mm2 ,modules of elasticity 900n/mm2 and ressisistance to spread of flame of class A category with property of being termite/borrer proof ,water /moisture proof and fire retirdent and fixed in position with MS hold fast /Lugs/SS dash fasteners of required dia and length complete all as spd and direction of engr-in-charge.

Supply and fixing factory made single extruded WPC (wood polymer composite ) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade ),calcium carbonate and natural fibres (wood powder/rice husk /wheat husk )and toxic additives (maximum toxicity index of 12 for 100gms ) having miniumum density of 650 kg/cum and screw withdrawl strength of 1800N (face) & 900N (Edge ), miniumum compressive strength 50N/mm2,modulus of elasticity 850 N/mm2 and resisitance to spread of flame of class A category with property of being termite / borer proof ,water/moisture proof and fire retardant .WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S S screws all as per direction of Engineer -In-Charge (Note : stainless steel butt hinges and necessary SS screws be paid separately)

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (withsash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as directed.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) Frame work for doors, windows, ventilators and partitions (Fixed portions)including shuterrs with Extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,of engr-in-charge.

S&F Powder coated aluminium deco grill fixed to powder coated windows and doors complete all as specified and directed

S&F sheet glass 5.50 mm thick ordinary quality and glazing with oil putty in square/ rectangle n.exc 0.5 Sqm in each pane complete all as specified and as directed by Engr-in-Charge.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete

S&F butt hinges 100mm si zecast ,with mild steel hinge pin ,bright polished and fixed,type B-11 complete all as specified and directed

S&F 150mm long aluminium handle cast type anodised complete all as specified and directed.

Supply and fixing in repairs 250 mm long aluminium anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified.

M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks complete including demolition of old brickwork all as specified and directed

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified.

M&L for 10mm thick rendering in CM 1:6 over brick / conc wall surfaces finished to even & smooth w/o using extra cement complete.

M&L for 15mm thick rendering in CM 1:6 over brick / conc wall surfaces finished to even & smooth w/o using extra cement complete.

M&L Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete

M & L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of Chalk whiting complete all as specified and as directed by Engr-In-Charge.

M& L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over one coat of white wash complete all as specified and directed

Preparation of old treated surfaces by washing, rubbing down and stopping of cement paint surfaces and applying one coat of cement base paint complete all as specified and as directed by Engr-in-Charge.

Dismantling asbestos cement corrugated or semi corrugated sheets as in roof covering all as specified.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified incl making good the disturbed portion in CM 1:6 complete

M&L for pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified all as specified.

S&F Rolled Mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 stance ieces, cleats etc

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified.

M&L for vitrified ceramic tiles , 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles invertical surface 450X 350X 7mm thickset and jointed in neatcement slurry and pointedin white or colour cement to match the colour of tiles over and including 15mm thick rendering in cement mortar 1:4 on stone / brick/ concrete masonry surfaces all as specified

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F, GI powder coated snap grid of sizes 605 mm x 605 mm frame work for false ceiling with main tee 32x24x1mm thick, cross tee 26x24x1mm thick and wall angle 24x24x1mm thick, flange covered with PVC thin sheet including gypsum board 7-9 mm thick, duly finished surface (thin PVC layer on gypsum board as per manufacturer instructions) size 600mm x 600mm and the same to be placed in snap grid as in false ceiling and Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

Dismantling of Stone/concrete slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar

Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced).

M&L 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) in sub base ,floors etc

M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors.

Cutting chases, pinning in. makinggood to facings where required andpointing in cement mortar 1:3 toends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; dcutting chases for concealed watertubing or concealed conduit wiring,etc., and making good, cutting notexc 10 cm girth ®

S&F rotational moulded polythylene water storage tanks (cylindrical vertical with colsed top) hoisted and fixed in postion including ball valve all as spd and directed of 1000 ltrs capacity. Including dismantling of the tanks (Make : Sintex/Ganga of ISI marked

S&F gun metal globe or gate valves with iron wheel head, screwed boh ends for iron pipe and fixed of 20mm dia on stone, concrete, block, slab or wall in repairs of ISI marked

S&F in Repairs PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to wall of size 75mm bore complete all as specified and as directed.

S&F in repairs waste coupling of PTMT (half or full threaded) suitable for WHB/Sink, bore dia of discharge pipe 40mm (Minimum weight 60gms).

S&F Grating doom 125 mm dia with waste holeof PTMT. (Minimum weight 40gms) complete all as specified and as directed.

S&F 32mm dia PVC flexible waste pipe with socket for union, for WHB/urinal/sink complete all as specified complete all as specified and as directed.

S&F in repairs 15 mm bore bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed,

M&L for 75mm thick PCC (1:3:6) type B2 (using 20mm graded aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.in patchwork n exc 3.00 sqm each patch complete all as specified and as directed.

M& L for 75 mm thick PCC flooring 1:4:8 Type D-2 (using 40mm graded crushed stone aggregate)/brick coarse aggregate as in / subbase of floor finishes complete all as specified and as directed by the Engineer-in-charge.

Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment with 20mm thick screed bed or bedding layer in CM 1:6 in floors

M&L for factory made hard wearing coloured ceramic tiles 300x300x10mm in size or nearest higher size laid as in floor etc, set and jointed in neat cment slurry & pointing in white or colured cement to match with the shade of tiles over & including 20mm thick screed bed in cement & sand mortar 1:6, complete, all as specified & as directed. Make :- Johnson/ Orient bell

Reinforced cement concerte (Nominal mix) inBeams, cantilevers, bressummers, lintels over 1.5m span B1 1:2:4(20mm graded aggregate)

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays tween floors and beams, etc

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks, DB, MCB etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 25mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including modular sunk type pressed steel box with & including modular cover plate and frame for housing switches, sockets, regulator, etc’, complete, all as specified & directed. . (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

All as per item No 63.00 (here-in-before) but ceiling fan /exhaust fan point controlled by one Number one way switch.

All as per item No. 63.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board

All as per item No. 63.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.

All as per srl item No. 63.00 (here-in-before) but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi stranded on independent board including provn of 2.50 Sqmm unsheathed, multistranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge.

S&F modular type switch , flush type, single pole, one way, 5/6 Amp, 230 Volts all as specified & directed.

S&F modular type switch piano flush type, single pole, one way, 15 Amp, 230 Volts.

S&F modular type socket outlet multipurpose 3 Pin 5/6 Amp (with 2 pin outlet also) 230 volts AC complete all as specified and directed.

S&F modular type socket outlet multipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.

S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F modular type Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1500 mm ceiling fan etc complete all as specified and directed

S&F in replacement LED lights fitting 1x 40W, 240Volts, 50HZ regal batten for LED incl ultra bright glass LED tube light aluminium housing with very high efficiency, singel / double side connection complete.

S&F in replacement street light LED light fitting 20 Watt, 240Volts, 50HZ pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.

S&F in repair of MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed.

S&F in repair of MCB SPN, 240 volts, 40 Amps to 63 Amp breaking capacity 10KA complete all as specified and directed.

S&F in repair of sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-I) including taking out old existing earthing complete all as directed.

Supply and fixing ceiling fans (Copper winding) complete with blades, down rods and accessories, 230V, 1200mm sweep , min air delivery 210 CFM ,BEE five star rated with brushless direct current motor(BLDC) with remote complete all as specified and directed

Supplying, laying, jointing, testing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade complete of size 16 sqmm 2 core all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc complete all as specified and directed by Engr-in- Charge.

Excavation in trenches in soft/loose/hard/dense soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm thick etc complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point etc complete all as specified and directe.

Supply and laying double wall corrugated pipe(DWC) confirming to IS 19430 Part -I of size 50mm outer dia and 38mm inner dia complete all as specified and as directed

S&F down rod suitable for ceiling fans for extension from ceiling of 1meter length complete all as specified and directed by Engr-in- Charge.

Supply & fixing and testing metal body exhaust fan of 480 mm sweep heavy duty, double ball bearing, 900 RPM, suitable for SP 230 / 250 volt, 50 Hz AC supply complete with louver shutter including fixing / grouting of frame in wall & cutting opening complete with covers & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan complete. Make : Model No Turbojet SP of Havells or Cat Part No Supreme DLX HD of Bajaj or Cat No Transair of Crompton equivalent of Bajaj

Supply and Fix wall mounted air circulated fan , 400mm sweep, Aerodynamically designed blades for high air delivery, powerful copper motor designed, min 1350RPM, adjustable tilt, oscillating, button control complete all as specified and directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality of capacity 2 Ton minimum 3 star rating complete all as specified and directed.

S&F sheet metal enclosure Double pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA. Make Voltas or Equivalent

OM CONSTRUCTION CO. (BID ID -3389267)

malik constructions (BID ID -3390094)

Shiva Constructin Co. (BID ID -3397209)

Balaji Construction Co. (BID ID -3389835)

m/s krishna engineers1 (BID ID -3388988)

VIKAS INFRASTRUCTURE (BID ID -3390788)

SHRI HARI BUILDERS (BID ID -3388852)