Const. of residential quarter at PHC Hartyan (Health Deptt.).

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width & for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, depth upto 1.5 m including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled & neatly dressed. All kinds of soil 80% & Ordinary rock @20%

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed.incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm nominal size) crushed with 20% plums incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 75 in foundation and plinths in cement mortar 1:6 (1cement : 6 coarse sand). incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Extra for brick works in super structure above plinth level up to floor five level.incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Half Brick masonry with bricks of class designation 75 in foundation and plinth in cement mortar 1 : 4 (1 cement : 4 coarse sand) incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Extra for half brick masonry in superstructure above plinth level up to floor V level.incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm nominal size) crushed incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. 40 mm thick with 20 mm nominal size stone aggregate. Crushed incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing and laying in position of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level. incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing and laying Reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) in suspended floors, balconies, landings and staircases having 15 degree slope. upto floor five level excluding the cost of centering and shuttering.incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Centering and shuttering including strutting, propping etc. and removal of form work for :-

Foundations, footings, bases of columns.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts and struts.

Suspended floors, roofs, landings, balconies and access platforms.

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) sal wood.

Providing & fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed Butt hinges bright finished off required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer- in charge. Second class Deodar wood. 35 mm thick.

Providing & fixing panelling or panelling & glazing in panelled and glazed shutters for door, windows & clerestory windows (area of opening for panel inserts excl. portion inside grooves or rebates to be measured) panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle board 12 mm thick plain particle board flat pressed 3 layer or graded wood particle board medium denesity grade I IS: 3087 marked

Providing & fixing glazed shutters for doors , windows and clerestory windows using 10 Kg / Sqm. (4 mm thick) float glass panes , incl. ISI marked M.S pressed butt hinges bright finished off required size with necessary screws 35 mm thick of second class Deodar wood.

Proving & fixing 35 mm thick wire gauze shutters using galvanised M.S wire gauze of average width for aperture 1.4 mm both direction with wire of dia. 0.63mm for doors, windows & clerestory windows with hinges & necessary screws. Second class deodar wood.

Providing & fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. Including priming coat with approved primer all complete. Fixed to openings / wooden frames with raw / plugs, screws etc.

Providing 40x5 mm flat iron holdfast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts & wooden plugs & embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and fixing wooden moulded beading to doors & windows frames with iron screws, plugs & priming coat on unexposed surface etc complete. 2nd class Teak wood 50x20 mm

12 mm cement plaster of mix 1:6 (1 cement: 6 coarse sand). incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand) incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

6mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand).incl all carriage lead, lift, loading/ unloading/ handling/ rehandling Complete

Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ; Size of tile 60x60 cm

Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @3.3 kg/ sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished Raj Nagar) 8 mm thick.

Distempering with oil bound washable distemper of Approved brand & manufacture to give an even shade over and including priming coat with cement primer. New work (two or more coats) over and including priming coat with cement primer

Finishing walls with water proofing cement paint of approved brand and manufacture to given an even shade new work (two or more coats applied @ 3.84 Kg/ 10 Sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard & soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.

Providing & fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing & fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts & screws etc. complete.

300x16 mm dia

250x16 mm dia

Providing & fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing & fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC-10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete single rubber stopper.

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated & grouted with fine sand including finishing the top smooth. (Crushed).

Providing & fixing on wall face unplasticised- Rigid P.V.C rain water pipe confirming to I.S – 13592 type –A incl. jointing with seal ring confirming to I.S- 5382 leaving 10 mm gap for thermal expansion 110 mm dia

Providing & laying/ fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equaivalent make in colour shades excpet White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of cement mortar 1;4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc. complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colour , shades except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm. Incl. pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing gang saw cut mirror polished (pre moalded and pre polished) machine cut for kitchen, platform, vanity counters, window sills facias and similar locations of required size of approved shade colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement matching pigment, epoxy touch ups including rubbing moulding and polishing to edge to give high gloss finisg etc complete at all levels. Granite of any colour and shape (area of slab upto 0.50 Sqm) 18 mm thick

Extra for providing edge moulding to 18mm thick Granite stone counters, Vanities etc. over item No. 8.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.

Extra for providing opening of required size and shape for wash basins/kitchen sink in kitchen platform, vanity counters and similar location in marble / stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50Mt & lift upto 1.50M.

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete.

Providing & fixing P.V.C waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipes 32 mm dia.

Providing & fixing PTMT grating of approved quality and colour circular type 100 mm nominal dia

Providing & fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing & fixing 600 x 120 x 5 mm glass shelf with edges round of supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.

Providing & fixing G.I pipes complete with G.I fittings and clamps I/C making good the walls etc.

15 mm dia nominal bore light.

20 mm dia nominal bore light.

Providing and fixing C.P brass shower rose with 15 or 20 mm inlet 150 mm diameter.

Providing and fixing unplasticised PVC connections pipe with brass unions 45 cm length 15 mm nominal bore.

Providing & fixing C.P brass shower rose with 15 or 20 mm inlet 100 mm diameter

Providing and fixing ball valve (brass) of approved quality complete 25 mm nominal bore

Providing and fixing C.P brass long nose bib cock of approved quality confirming to IS standards and weighing not less than 810 grams 15 mm nominal bore.

Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplaste Star, Lotous or equivalent having valid ISI License). (1000 ltr capacity)

Providing and fixing Salem Stainless steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I brackets and stainless steel plugs 40 mm including painting of fittings and brackets cutting and making good the walls wherever required. Kitchen sink with drain board 510x1040 mm bowl depth 250 mm.

Construction brick masonary manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cm and 45cm deep including angle Iron frame 50x50x6mm and precast RCC slab cover with 40x40x5mm frame (2'-0" x 2'-0") with F.P.S bricks with class designation 75 & with crushed stone aggregate.

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W drain pipe 100 mm diameter and 1.20 m long complete as per standard design.

Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan.

Providing & fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete

100 mm dia

75 mm dia

Providing and fixing C.P brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1.970 kg 15 mm nominal bore of standard back type.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931. 15mm nominal bore.

Providing & fixing white vitreous china pedestal type water closet(European Type W.C pan) with seat & lid, 10 litre low level P.V.C flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS: 7231, with all fittings & fixtures, complete including cutting & making good the walls & floors wherever required W.C pan with ISI marked white solid plastic seat & lid.

Providing & fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china wash basin size 630 x 450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing & fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

JANDIAL INFRA DEVELOPERS PVT LTD