REPAI REPLACEMENT TO FENCING COMPOUND WALL STORM WATER DRAIN PATH AND CULVERT AREA UNDER AGE BRI AT SUBROTO PARK

Amount

Taking down cement plaster of any description on brick /concrete/ stone walls etc including raking out joints, hacking for key, scrubbing down with water upto 4 storeys of building etc and disposed off unserviceable materials to out side MOD land complete all as specified and as directed.

M&L for 5 mm thick cement plaster in cement mortar (1:3) as in ceiling, soffit of stair case, chhajjas facia etc including cement slurry etc complete all as specified and as directed by Engineer-in-Charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on brick, concrete or stone surface and finished even and smooth without using extra cement complete all as directed and specified. Note : White cement shall be used as per site requirement or as directed by EIC.

M & L for applying two coats of cement based paint by roller bursh/Spray / Aerosol Spraying machine on newly plastered or unplastered wall surface over a coat of primer including preparation of surfaces, complete all as specified.

M&L for complete removal of existing treatment of wall / chajja facia surfaces by grinding machine/angle grinder and scraping down smoke soots moulds, moss and efflorescent salts over old decorated plastered or unplastered surfaces of walls incl cornices etc and applying two coat of exterior emulsion weather proof / Apex (Blue) paint by roller brush/ Spray / Aerosol Spraying machine over a coat of primer complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of wall / surfaces by grinding machine/angle grinder and scraping down smoke soots moulds, moss and efflorescent salts over old decorated plastered or unplastered surfaces of walls incl cornices etc and applying two coats of cement based paint by roller brush/Spray / Aerosol Spraying machine over a coat of primer complete all as specified and directed by EIC.

M&L for preparation of old floor surfaces such as chequered tiles or interlocking pavers etc. by steel wire brushing, scrapping down smoke soot, mounds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down with water and apply two coats of FLOOR GUARD APEX WATER BASED ACRYLIC EMULSION paint by roller brush/Spray / Aerosol Spraying machine complete all as specified and as directed by Engineer-in-Charge.

M & L Preparation of old decorative (plastered or unplastered surfaces) and applying one coat of white (lime) wash by roller brush/ Spray / Aerosol Spraying machine on wall surface complete.

Demolition of brick/PCC block/Stone work built in cement mortar including all quoins, arches, coping, pillars etc and removing the debris outside defence land from the site complete all as specified and directed by EIC

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil all as specified and directed by EIC

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but not exc. 3m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil all as specified and directed by EIC

M & L for PCC (1:4:8) Type D2 (using 40 mm graded stone aggregates ) as in foundation Filling and Mass Concrete etc .

Use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams and similar works for rough finished surface complete all as directed.

Use & waste form work to sides of pillars, posts and columns for rough finished surface complete all as directed.

Use & waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as directed.

M&L for RCC nominal mix 1:11/2 : 3 type A1 using 20mm graded stone aggregate as in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete and similar RCC works complete all as specified and directed by EIC

M&L for RCC nominal mix 1:11/2 : 3 type A1 , using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts & similar RCC works complete all as specified and directed by EIC

M&L for RCC nominal mix 1:11/2 : 3 type A1, using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels & similar RCC works complete all as specified and directed by EIC

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia.complete all as specified and directed by EIC

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia complete all as specified and directed by EIC

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick using excavated soil all complete all as directed.

Removing excavated soil (any type) out side of MOD land and depositing where directed at a level not exc 1.5 mtr above from the starting point complete all as specified and directed by EIC

M&L for brick work with sub class `B’ brick straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as directed at site by EIC

M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate Set in CM(1:4) louvres and jallies, 50mm thick (measured solid), including all mouldings but excluding frame including dismantling of existing jallies all as specified and directed by Engineer-in-Charge.

M/L for brick work with sub class 'B' straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base all complete and all as specified .

M&L sand filling under floor or in foundations and on floors including watering and consolidation complete all as specified and directed.

S &F Machine pressed factory made precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 80mm thickness, M-40 Grade laid over and including 25 mm thick layer of screened sand cushning complete all as specified and as directed.

M & L for chequred cement concrete coloured tiles size 20cmx20cm/25x25cm/30x30cm x20-25mm thick with cement and no pigment in floors etc set jointed and pointed in neat cement slurry over and including 15mm thick screed in CM (1:6) complete all as specified and as directed.

Filleting in any postion and any shape in cement mortar 1:4 including all miters, stops Section of fillet exc 25Sq cm but n exc 50 Sq cm etc

M&L for Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, road side kerb stone etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM(1:4) with joints to match complete all as specified and directed by EIC

M&L Applying two coats of synthetic enamel paint on brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described including preparation of new surface & priming paints plaster coat when unconnected with other painting or when painted in a different tint ®complete all as specified and directed by EIC

Dismantling fencing wire mesh, any type complete all as specified and as directed by Engr-in-Charge

M&L for Excavating soft/loose/hard soil in post holes (or similar holes) each n.exc 0.5 Cu.m getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing excavated soil out of MD lant and making good surface.

S&F for Mild steel angle iron fencing post and sturts in fencing incl necessary cutting drilling welding etc and bending to swan neck shape as required and drilling holes notching for wives etc conforming to Fe-290 Gde E-165 complete all as specified.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and as directed by Engr-in-Charge

Fixing only chain link fencing including line wires, round bars any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and as directed by Engr-in-Charge. Note : (i) Chain link fencing & line wire shall be measured and paid seperately as supply only. (ii) Standards, rails, straing bolts & screw bolts shall also be measured and paid seperately.

Supply only mild steel round bars of 10mm dia as in line wire, cut to lengths, hooking ends etc conforming to Fe 410-W (Gde E-250) quality 'A' for typing chain link fencing complete all as specified and as directed by Engr-in-Charge

Supply only mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but n. exc. 10 cm long and dia of shank 5 to 10 mm complete all as specified and as directed by Engr-in-Charge.

S&Fgalvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured).

S&F MS Flat iron for securing bolts post and strut in fencing including cutting drilling holes notching for wire etc. flat iron filet and similar work conforming to FE 410-0 or Fe 310-0 complete all as specified

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M&L for preparation of new steel surfaces n exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of old steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement,including form, moulds,mitred/stopped ends etc complete all as specified and directed by Engr-in-Charge.

S&F in repair factory made SFRC manhole / drain cover (Grade M-25) heavy duty cover slab in rectangular shape of size as required, 80 mm thick incl MS sheet 2 mm thick and 80 mm wide frame all around the cover and set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

S&F sign boards (one side/two sides) of different size 2 mm thick, fixed on post of MS pipe medium class and frame of angle iron of size 40x40x5mm (frame and post not included in this item) using stain less steel nuts and bolts of 6mm dia, aluminium rebate with back side welding, front face of aluminium sheets to be covered with white micro prismatic tape/ Retro reflective sheeting, letter/matter to be carried out by over lay colour film (colour as approved by GE) pasted over white prismatic sheeting and back side of board (with one side) shall be painted with epoxy powder coating of any shade etc complete all as specified and as directed by Engr-in-charge.

S&F mild steel plain black pipe or tube medium class for post/pole for fixing of sign boards etc including cut to size and bent to required shape, both ends closed with 3 mm thick MS sheet including welding,driling & painting with black and white alternate layers of synthetic enamel paint complete all as specified and as directed by Engr-in-charge.

Dismentling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

M&L for mild steel work (miscellaneous) as in posts or struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc and hot dipped Galvanised flat iron fillets (for securing wire mesh etc) and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

S&F mild steel screw bolts (machine made) with hexogonal or square ends at one end and screwed the other to be fitted with washed and one hexagonal or square nuts, n exc 5 cm long diameter of neck 5 to 10mm etc complete all as specified and as directed by Engr-in-Charge.

Supply and fix galvanised steel punched type razor concertina coil 600mm dia (dia of unstretched coil) and fixed to angel iron & coil with GI wire all as specified and as directed. Note : Each concertina coil to be fixed/binding with GI wire of 3.15 mm dia (minimum) at every third ring/ circle/round for connecting of each coil. Concertina coil be fixed with angle iron posts and also (outer line of concertina coil) at the middle of two iron posts using GI hooks (size : length = 15 cm, dia = 10mm) fixed in PCC for proper line/alignment. Cost of the same is deemed to be included in the quoted rate of the item.

shiva enterprises

J D ENTERPRISES

JAIPAL and BROS