Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC PLOT NO 39 SHRI SHIVE NAGAR 05 MOTI BANDHA MACHEDA HARMADA JAIPUR 302013 RAJ | JAIPUR | JAIPUR | RAJASTHAN | 302013 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.4 L+₹2.9 L (17.7%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Bidder |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
7 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (S) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
PETTY REPAIR AND CERTAIN OTHER MISC B/R WORKS IN ZONE-1 (A) AREA UNDER GE (S) JAIPUR
2022_MES_568255_1
GE (S)/J-63P OF 2022-23 8779/E8
Open Tender
Civil Works
Item Rate
270 days
Jaipur
Class E and a(i) category
9 documents required · 9 mandatory
₹500
GE (S) Jaipur
₹50,000
Yes
2 Feb 2023
12 Dec 2022
9 Jan 2023
12 Dec 2022
7 Jan 2023
26 Dec 2022
Amount
Petty repairs to leaking in bib tap, pillar tap, stop cock, Angle valve and low level flushing cistern PVC connection etc of any description including changing the washer thread grip watering tape etc all as specified.
Removal of air lock/blockage of water in GI tubing 15 mm/20 mm bore cleaning the pipe or fittings using pressure pump/jet etc and refixing the same in position complete all as specified.
Supply and fixed in repairs Angular Stop Cock with Wall Flange Make- Kohler cat No.K-11791IN-4A-CP or equivalent cat in other make as per Appx 'B'.
Supply and fixed in repairs single Lever Extended Basin Mixer (Height 85mm) without Popup Waste System with 450mm Long Braided Hoses fancy type 15 mm bore complete all as directed. Make- Kohler cat No.K-18161IN-ND-CP or equivalent cat in other make as per Appx 'B'.
Supply and fixed in repairs Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as directed.Make- Kohler Cat No. K-16298IN-9-CP or equivalent cat in other make as per Appx 'B'.
Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type long bodycomplete all as specified and directed. Make- Kohler Cat No. K-11749IN-9-CP or equivalent cat in other make as per Appx 'B'.
Supply and fixed in repair bib Cock with Wall Flange complete all as specified and directed. Make- Kohler Cat No. K-37341IN-4-CP or equivalent cat in other make as per Appx 'B'.
Supply and fixed in repair 2-way Bib Cock with Wall Flange complete all as specified and directed. Make- Kohler Cat No. K-37320IN-4-CP or equivalent cat in other make as per Appx 'B'.
S&F in repairs CP overhead shower dia 110 mm round with revolving joints (with body rotation) & 115mm long arm shower with rabit cleaning system and all fittings Make - Kohler Cat No. K-724191N-CP or equivalent cat in other make as per Appx 'B'.
S&F in repair Toilet paper holder complete all as specified and directed. Make : Kohler Cat No. K-56331N-CP or equivalent cat in other make as per Appx 'B'.
S&F in repair CP single towel rail 600 mm complete all as specified and directed. Make:Kohler Cat No.K-250651N-CP or equivalent cat in other make as per Appx 'B'.
S&F in repair Soap dish complete all as specified and directed. Make : Kohler Cat No. K-56341N-CP or equivalent cat in other make as per Appx 'B'.
S & F in repair for CP hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. Make : Kohler Cat No. K-129271N-CP or equivalent cat in other make as per Appx 'B'.
S & F in repair Corner glass shelf (with bracket). Make : Jaquar, CAT Part No ACN-1173 or equivalent cat in other make as per Appx 'B'.
S & F in repair CP towel ring round complete all as specified. Make : Kohler Cat No. K-5631IN-CP or equivalent cat in other make as per Appx 'B'.
S&F CP brass bottle trap 32mm size with 300 mm & 190 mm long wall conection pipes & wall flange. Make: Kohler Cat No. K-73141N-CP or equivalent cat in other make as per Appx 'B'.
S&F in repair 15mm bore Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm- 142 gms) complete.
S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight - 210 gms) complete.
S&F in repair PVC connection 15mm dia 45cm long with 2 Nos brass check nuts with washer complete all as specified
S&F in repair PVC connection 15mm dia 60cm long with 2 Nos brass check nuts with washer complete all as specified
S&F in repair 32mm dia PVC waste pipe flexible type for WHB 60cm long with union complete all as specified
S&F in repair waste grating with waste pipe coupling brass chromium plated 32mm dia for wash hand basin complete all as specified
S&F in repair 40mm dia PVC waste pipe for kitchen sink 60cm long with union complete all as specified
S&F in repairs sinks made of stainless steel matt finish (AISI-304 grade) 1mm thick kitchen with plugs, washers and wastes, including waste coupling & waste pipe, bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420 bowl size 405x355x178 mm depth complete. Make Bluestar Model SSSB-06AB or equivalent cat in other make as per Appx 'B'.
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore including taking out existing pipe with fitting complete.
S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore including taking out existing pipe with fitting complete.
M&L in repair PVC Flushing cistern 10 ltr capacity white, with inlet, ball valve, float and handle, high or low level including bracket & 32 mm dia flush pipe etc all as specfied and directed.
S&F in repairs internal fitting for flushing cystern accessaries complete set all as specified.
S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC seat cover with mild steel chromium plated or aluminised hinging device including connection to drowm pipe and flushing pipe all as specified.
S&F in repairs wash hand basin vitreous china white (flat back) of size 550x400mm CI bracket 15mm dia polythene connection 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified, including taking down the existing wash hand basin.
S&F in repairs white rimless Single piece-WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, S trap, incl all neccessories items complete all as specified. Make : Kohler Cat part No. K-77739T-SL-0 or equivalent cat in other make as per Appx 'B'.
S & F in repair Wall Hung Basin with Fixing all accessories, Size : 650x475x345 mm Make : Jaquar Cat No. ACS-WHT-87801 or equivalent cat in other make as per Appx 'B'.
S&F in repairs counter top oval wash hand basin vitreous china white (flat back) of size 545 X 545 X 180 mmincluding all fittings complete all as specified. Make : Jaquar Cat No. CON -FSS-WHT-29601 or equivalent cat in other make as per Appx 'B'.
S&F in repair CP brass bottle trap 32mm dia including joining to waste fitting and waste pipe complete all as directed
S&F in repairs CP grating 100mm dia round without waste hole fixed on floor/nahani trap fixed with cement complete.
S&F in repairs CP grating 100mm dia round with waste hole fixed on floor/nahani trap fixed with cement complete.
Disconnecting and dismentling of existing water tanks exc 250 but not exc 500 ltrs capacity all as directed.
Disconnecting and dismentling of existing water tanks exc 500 but not exc1000 ltrs capacity all as directed.
S&F in rotational moulded polythene water storage tank 3 layer (Cylindrical vertical with closed top ) hoisted and fixed in position 500 ltrs capacity including reconnecting and refixing the GI pipe and fittings complete all as directed.
S&F in rotational moulded polythene water storage tank 3 layer (Cylindrical vertical with closed top ) hoisted and fixed in position 1000 ltrs capacity including reconnecting and refixing the GI pipe and fittings complete all as directed.
Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for exc 500 n. exc 1000 ltrs capacity of tanks as directed by eningeer -in-charge.
Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for exc 250 n. exc 500 ltrs capacity of tanks as directed by eningeer -in-charge.
S & F in repair PVC water tank lid suitable for 500 ltr to 1000 ltrs capacity OHT complete all as specified.
S & F in repair floor mounted spring for aluminium door ISI marked as per sample and approved by GE including taking down existing aluminium glazed door shutter n. exc. 2 sqm each and refixing the shutter in same opening/position ( after replacing the floor spring) complete as specified.
Dismantling of floor /skirting ( terrazzo/ PCC / Ceramic Tiles) including cement mortar bedding (but not backing ) and removing the rubbish from the site as specified.
M&L for Vitrified ceramic coloured tiles double charged (of approved light shade) of size 600x 600mm, 9 to 10 mm thick in floor, set & jointed in neat cement slurry including a layer of screed bed 15mm thick 1:6 and pointed in coloured cement to match the shade of tiles over cement screed bed complete all as specified.
All as per item No. 46 but on vertical surfaces such as skirting, dados and riser etc including a layer of screed bed 10mm thick 1:4 complete all as specified.
M&L glazed ceramic tiles in vertical surface 300x600x7 mm thick set and including 10mm thick layer of screed bed in cm 1:4 on verticle surfaces and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles as on verticle surfaces as skirting and dado etc,complete all as specified.
M&L Non skid ceramic coloured tiles 300x300x7 to 8mm thick area of each tile exceeing 0.06 sqm but n.exc 0.11sqm in floors etc set and including 15mm thick layer of screed bed in cm 1:6 on floor surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match the shad of tile complete all as specified.
M&L for non-skid Ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. and including 15mm thick layer of screed bed in cm 1:6 on floor surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.
Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar as directed.
M&L for granite 18 to 20mm thick as in steps ,pillars, Jambs, counter slabs of WHB (of any type) work (table rubbed and polished) in cooking plate forms, counter of WHB and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete as specified.
S&F in repair 20mm dia stainless steel conduit 1.6 mm thick with bright finish pipe of required length for curtain rods and stainless steel decorative knobs at each end and brackets as specified and directed by Engr -in- Charge. Note :- The average length of each curtain rod shall be considered 1.5 m approx.
Taking down chowkats or frames (W/out taking of shutters) not exceeding 1.5 Sqm each as specified.
Taking down chowkats or frames with shutter (W/out taking off shutters) exc 1.5 Sqm but n.exc 4 sqm each as specified.
Taking down shutters of any description n exc 1sq. m each as specified.
Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each as specified.
S & F framed work as in doors or gates of angle or other section as chowkhat or shutters, tie bar, hold fast, guard bars, cooler stand, brackets etc and fixing complete Fe 290 (Gde-E-165) complete as specified.
S&F 35 mm thick IInd class Hardwood plain factory made, framed, paneled shutters (any number of panels), with panels of 12mm veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.
S&F 35 mm thick 2 CHW Flush shutters factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.
S&F 35 mm thick 2 CHW glazed & skeleton shutters factory made, open rebated & prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc size of members as specified in SSR Pt-I section 8 clause 8023 (a), in II nd class hard wood complete as specified.
S&F for 2nd Class hard wood wrought plain fillets square, rectangular or triangular in section n exc 3 sq cm fixed nails complete.
M & L for Painting to new or prevously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide primer including preparatin of surfaces complete as specified.
M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer complete as specified.
S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforce with M.S square tube, high strength suppling & fixing in opening as per specification as specified.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing as per specification as specified.
M&L Mild steel rolled section in flat iron as in hold fast and similar work grade Fe-165 complete.
S&F 150mm extruded aluminium alloy handles fabricated type anodised complete as specified.
S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete as specified.
S&F 200mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S&F 150mm extruded aluminium alloy tower bolts extruted sections anodised complete.
S & F floor door stopper of brass body and tongue with hard drawn steel spring overall length of cover plate150mm complete as specified.
S&F aluminium sliding door bolt 300mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete as specified.
S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples complete all as specified.
S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples complete all as specified.
S&F in repair Door closer Aluminium (Diecast) body hydraulically regulateld, designation No. 1 univerasl type, suitablee for door shutters up to 700 mm in width and of weight not more than 35kg and fixed as specified.
Dismantling boarding plywood etc of any description and in any position fixed with nails etc all as directed complete as specified.
S & F for 18 mm thick (one side decorative lamination and other side balancing white lamination ) solid PVC board with cement solvent adhesive for shutter,kitchen cabinate/ cup board /partition wall/ wall cabinet complete all as specified and directed.
S&F soft close clip on auto hinge bright finish (Auto close hinges) complete all as specified.
S&F 125 mm dia oval shape brass handle fancy type bright finish complete all as specified.
S&F in repair stainless steel (SS 304) modular kitchen cabinate basket (plain) as per trade pattern of approved quality of size 520 X 485 X 100 mm complete all as specified.
S&F in repair stainless steel (SS 304) modular kitchen cabinate plate basket (plain) as per trade pattern of approved quality of size 520 X 485 X 100 mm complete all as specified.
S&F in repair stainless steel (SS 304) modular kitchen cabinate cup & saucer basket (plain) as per trade pattern of approved quality of size 520 X 485 X 100 mm complete all as specified.
S&F in repair stainless steel (SS 304) modular kitchen cabinate cutlery & spoon basket (plain) as per trade pattern of approved quality of size 520 X 485 X 100 mm complete all as specified.
S&F basket/trolly roller channel 50 cm long extruded MS galvanised over roller heavy duty up to 35 kg weight capacity complete all as specified.(Pair of two nos.)
Repairing of existing aluminium door single leaf exc 1.00 Sqm but nexc 2.0 sqm including taking down all members , sheet glass of any thickness cleat , neosprene rubber beading and resecuring all sections & tightening all joints incl fixing new small cleats etc eac nexc 100 mm and refixing all members , sheet glass , aluminum cleat but new neosprene rubber beading (paid under seperate item ) and making the door and shutter serviceable , including fixing on Hinges complete all as specified.(Floor door springs, Neosprene rubber beading , Hinges Door Closer where renewed shall be measured and paid under seperate Item.
Ditto all as per item No 86.00 above but door/window/ventilator shutter but exc 1.00 sqm but n. exc 2.00 sqm ditto
Supply Only neosprene rubber beading suitable for aluminium door / window panels suitable size complete.
S&F for Rubber door seal of overall size 35 mm fixed screw on wooden or PVC Shutters as specified.
S & F in repair floor mounted spring for aluminium door ISI marked as per sample and approved by GE including taking down existing aluminium glazed door shutter n. exc. 2 sqm each and refixing the shutter in same opening/position ( after replacing the floor spring) complete as specified.
S&F in repair wall mounted Mirror cabinet PVC/fiber of size 550 x 520 x 100 mm with sliding mirror 4mm thick of size 240 x 290 x 2 Nos with built in rack of size 230 x 150 x 90 mm with PVC plug etc with CP towel rail of length 270 mm and 100 mm dia complete as specified
S&F in repair for 100 mm mild steel 4 lever mortice lock vertical type of size complete.
S&F in repair for built in cupboard (Almirah) handle as per existing sample complete all as specified.
S&F in repair for built in cupboard (Almirah) lock as per existing sample complete all as specified.
Supply fabricate & fix in repair position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4.8 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20736) Note:- Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B
S&F in repair powder coated aluminium frame of approved colour coating for doors, window, ventilators,, cabin partition with one or more rebates including joining cleats for fixing etc complete all as specified
S&F in reapir aluminium anodised powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified. Note :- Rate shall be inclusive of 4.8 mm thick glass and/or ss wire gauge/aluminium grill etc complete.
S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete all as specified
S & F factory made steel window with side hung shutters factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded incl inserting the hold fast in stone masonry and make good the disturbed masonary complete as specified.
S & F 3 mm thick froasted glass and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete.
S & F 3 mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane complete.
Dismantling of 100/75 mm dia cast iron / PVC Pipe or reinforced concrtee drain pipes, jointed in cement mortar and taking out of trenches, if required as directed.
S & F in repair Stack clamps out of mild steel 25mm by 3mm flat iron and 8mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100/110 mm bore pipe complete.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for rain water etc complete.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors etc complete.
S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S&F PVC (SWR) bends any radius 110mm bore dia complete.
S&F 110mm bore PVC (SWR) branch piece, single (single y) equal or un equal complete.
Supply and fixed in repairs plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete as approved
Demolition PCC in ground floors above and pavings n exc 15 CM thickness (below above ground level) complete all as specified.
M&L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base for floor complete all as specified and directed by Engineer-in-charge.
M&L providing pre cast cement concrete block or slab 150mm thick 1:2:4 type B1 using 20mm graded stone aggregate with plain or inter locking joints as directed set in CM 1:6. kerbing/edge block to hard standing/footh complete including necessary earth work as required.
M&L for pvc moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness , M-35 grade, set with grey cement and pigment , jointed over 25 mm thick sand cushoning all as specified directed by Engineer-in-Charge.
S&F chequered tiles rubber moulded decorative designed cement concrete tiles 35 cmx 25 cm x 25 mm thick size of tiles as approved set, jointed and pointed in neat cement slurry with grey cement and pigments in floor incl 15 mm thick screed bed with cm 1:4 complete all as specfied
Taking down cement plaster any description, on brick/stone walls or concrete surface, etc. including raking out joints, hacking for key & scrubbing down with water, etc complete all as specified.
M&L 15 mm thick plaster in CM 1:4 on wall surfaces or concrete surfaces finished even and fair without using extra cement complete as specified.
M&L 15 mm thick plaster in CM 1:6 on wall surfaces or concrete surfaces finished even and fair without using extra cement complete as specified.
M&L 10 mm thick plaster in CM 1:4 on ceiling surfaces or concrete surfaces finished even and fair without using extra cement complete as specified.
M&L for preparation of new plastered surfaces of walls & applying two coats of oilbound distemper over a coat of primer complete as specified.
M&L for preparation of new plastered surfaces of walls & applying two coats of cement base paint over a coat of primer complete as specified.
M&L three coat of white wash on ceiling surface including preparation of newly plaster surface complete as specified.
M&L for complete removal of existing treatment on wall and applying two coats of oil bound distemper over a coat primer after preparation of surface complete as specified.
M&L for welding in repair of Box type steel windows existing damage / broken hinges, handle, frame and any other parts of n. exc. 2.5 cm in length and n. exc. 6 mm in thickness to achieve smooth function complete (Note : 1. Skilled labour (welder) and welding items like hinges, handle, peg set etc also includes in the rate 2. wire mesh will measure and paid separatly) if requied.
S & F in repair stainless steel (SS 304) kitchen plate rack of overall minimum size 900 x 750 x 225mm with partitions for small/ large plates etc made out of stainless steel 24 gauge (0.60 mm thick), fixed with rawl plug and CP steel screws all as directed of approved quality complete confirming to Make :- Blue star Model No SSKPR-315 or equivalent cat in other make as per Appx 'B'.
UNIVERSAL INFRAPROJECT PVT LTD
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .