SPL REPAIR TO RCC PROJECTED MEMBERS OF P-3, P-4 AND P-6 OF OFFRS MD ACCN, SPL REPAIR TO WOODEN UNSERVICEABLE WINDOW VENTIKATOR OF OFFRS MD ACCN BLDG NO. T-3 ( 4 QTRS) AND T-4 ( 1 QTR) AND SPL REPAIR TO MIS B/R ITEMS OF APPT HOUSE BLDG NO. P-26, P-28

Amount

Demolition of concrete in ground floors and pavings not exceeding 15cm thick (below of above ground level) complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls/concrete surfaces, including racking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and as directed.

Dismantling of wall or floor tilling including cement mortar bedding complete all as specified and directed.

M&L for light shade vitrified ceramic tiles double charged 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm with and including over 15 mm thick screed bed in CM (1:6) in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles double charged 10mm thick (square/rectangular) polished, area of each tiles n. exceeding 0.36 sqm with as in skirting / dado / vertical surfaces with and including over 10 mm thick rendering in CM (1:4) on wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

S&F rolled mild steel in main and cross rafters, purlins, posts, flat wind tie etc of angle of Fe-410-W complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength 550 Mpa as in roof covering fixed with self taping screws/L type or J type hook complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick plaster on other than fair face of brick work or concrete surfaces in CM (1:4) surface finished even and fair complete all as specified and directed.

M&L for rendering 10 mm thick in CM (1:3) on fair faces of concrete/brick surfaces of ceilling, finished surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for applying three coats of white on ceilling including preparation of new plastered surfaces complete all as specified and directed.

M&L for applying two coats of cement base paint over a coat of primer including preparation of new surfaces of wall complete all as specified and directed.

M&L for three coats of whitewash on plastered surfaces including preparation of new plastered surfaces of wall complete all as specified and as directed by Engr-in-Charge

M&L for 75 mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even and fair without using extra cement complete all as specified and directed.

Demolition of brick/stone masonry built in cement mortar complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for salt-glazed stoneware 150 mm dia drain pipes laid in trenchess and jointed complete all as specified and as directed.

M&L for concrete bed to drain pipe 150mm dia bore including packing under and complete surrounding pipe with cement concrete (1:3:6) type C-2, after they are laid and tested complete all as specified and directed.

M & L for 5 mm thick setting coat in cement mortar (1:2), trowel laid to even and smooth complete all as specified and directed.

M&L for brick work with sub class 'B' bricks in one brick thick honey comb walling built in CM (1:4) complete all as specified and directed.

M&L for filling of brick bats in soak well laid dry complete all as specified and directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs n.exc.200mm thick in rough finished surfaces etc. complete all as specified and directed.

M&L for RCC (1:1.5:3) type A-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to lengh, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or or securing clips complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) pipe single socket in any length with rubber ring joints fixed to wall with and including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified and directed.

S&F PVC (SWR) bends any radius of 110 mm dia complete all as specified and directed.

M&L for repair and rendering 10mm thick in CM (1:3) on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of visible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete (1:2:4) type B-0 (using 12.5mm graded aggregate) including necessary scafolding work for double/single storey bldgs complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block manufactured from ordinary portland cement any shape and size conforming to IS 15658-2006, M-35 Grade with grey cement and pigment with and including over 50mm thick sand cushioning complete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregates) as in coping, edging etc of interlocking paver block complete all as specified and as directed.

M&L for cement concrete type (1:2:4) type B-1 (using 20mm graded stone agg) in surface channels and drain complete all as specified and directed.

M&L extra for forming fair finished drains or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends complete all as specified & as directed.

Taking down chowkhats or frame n.exc 1.50 Sqm each with shutter (without taking off shutter from the frame) complete incl removing from site complete all as specified and directed.

Taking down chowkhats or frame area exc 1.50 Sqm but n.exc 4 sqm each with shutter (without taking off shutter from frame) complete including removing from site complete all as specified and directed.

S&F powder coated aluminium window shutter sliding type with frame of powder coated aluminium channel section suitable for sliding aluminium shutters weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium shop beading, screws with two shutter, with and including 5mm thick coloured glass and one shutter with stainless steel wire gauge including necessary locking arrangement and handle etc., complete all as specified and directed.

S&F powder coated aluminium ventilator louver type with frame, aluminium section weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and as directed

S&F frame work such as grills, grating etc with ends of bars shouldered and or rivetted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar wks conforming to Fe-290 Gd E-165 complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces fair faces of brick work/concrete and finished the surface fair and even complete all as specified and directed.

M&L for preparation of newly / old plastered surfaces of wall and applying a coat of wall care putty not less than 1mm thick to make the surfaces truly smooth complete all as specified and directed.

M &L for applying two coats of distemper oil emulsion over a coat of primer white or tinted on already prepared wall surfaces (or necessary preparation if required ) complete all as specified and directed.

M &L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed.

Demolition of reinforced cement concrete above ground floor n exc 15 cm in any position like roof, landing , staircase, chajja and similar suspended works complete all as specified and directed.

M&L for mild steel TMT bars 8 to 10mm dia, cut to lengh, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or or securing clips complete all as specified and directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for 15 mm thick cement plaster using cement mortar (1:4) with using WPC on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement to match the existing surfaces complete all as specified and directed ( Note:- WPC shall be measured and paid separetly)

M&L for 20 mm thick in two layers cement plaster in cement mortar (1:4) with using WPC on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. (Note:- WPC shall be measured and paid separetly)

S&F in repair 75 mm PVC (SWR) pipe single socket in any length with rubber ring joints fixed to wall with and including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified and directed.

S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M/s Kamleshwar Singh

M/S SHAMBHU SHARAN SINGH

m/s sheo kumar singh & sons

Delhi Enterprises