Repair and renovation of Head Office of MARKFED at Bhubaneswar

Removing old cement plaster from wall including racking out joints 12mm deep & removing the debris with in 50mt lead.

Dismantling brick or stone masonary in lime or cement mortar under 3mt height including stacking the useful materials for re-use & removing the debris with in 50mt lead.

Dismantling and removing 2.5 cm thick A.S flooring including stacking the useful materials for reuse and removing the debris within 50m lead.

Dismantling removing old tiled floor/ wall including reving the base course & stacking the useful materials for reuse and removing the debris with in 50 mt lead.

Scaraping old paint with scrapers, sand papering and washing with soap water or soda including scaffolding charges up to 5M height etc.

Dismantling and removing Doors, windows and ventilators including removal of frames, hinges fastering and stacking the same for reuse & removing the debris with in 50mt lead etc.

Dismantaling of ceiling plaster in roof and removing the debries from work site etc complete.

Earth work excavation in oridinary soil within initial lead of 50 m and initial lift of 1.5 m including rough dressing and leveling the bed.

Filling in foundation with sand well watered & rammed including cost, conveyance, royality & taxes etc. complete to work site.

C.C (1:3:6) with 4cm size HG CRUSHER BROKEN metal including all cost, conveyance, royalty & taxes etc.comp.to work site as per specification approved by the department & direction of E.I.C

C.C (1:2:4)with 12mm size HG chips including all cost, conveyance,royalty & taxes etc.comp.to work site as per the specification approved by the department & direction of E.I.C.

Providing M.S reinforcement for RCC work including cutting, bendind,binding & tying the grills and placing in position including cost of binding wire 18 to 20 gauge as per drawing & technical specification.

Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crusing strength not less then 35Kg/cm2 in cement mortar (1:6) in foundation & plinth ,super structure/ cum.

16mm thick cement plaster (1:6) on brick work including all cost conveyance royalty & taxes etc. comp.

12mm thick cement plaster (1:6) on brick work including all cost conveyance royalty & taxes etc. comp.

20mm thick greading cement plaster (1:4) over roof salb including all cost conveyance royalty & taxes etc. comp. to work site per 1sqm

Supplying, fitting & fixing vetrifed tile in floors of size 600mm x 600mm of approved make conforming to IS: 13755 with application of polymer modified quick set cement based water resistant adhesive conforming to IS:15477 of 3mm thick bed of filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC.Data for 10 sqm, vide page - 235 of A/R - 2006, item - 1,in other building items chapter.

Fixing tiles in walls size of 20cm x 30cm / 20cm x 20cmn Ceramic wall tiles striking and rises of steps on 12mm cement plaster ( 1:3 ) jointed with neat cement slury mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles per 1sqm.

Fixing tiles in floors size of 30cm x 30cm / 40cm x 40cmn Ceramic Floor tiles t on 25mm bed of cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles per 1sqm.

Fixing Granite tiles in floors trades or steps and landing on 25mm bed of cement mortar 1:1 jointed with neat cement slury mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles per 1sqm.

Wall painting two coats with weather coat painting of approved shade on new work to give an even shed.

Wall painting two coats with plastic emulation paint of approved shade on new work to give an even shade including cost of paint per sqm

Distempering one coat to walls with distemper of approved shade on old work to give an even shade excluding cost of distemper per sqm

Finishing wall surface of walls with cement based wall putty (water based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc. complete.

Supplying, fitting, fixing of Aluminum door with OEL anodized Al. door section of 9202 as vertical member and, 9201as top member and 9200 as bottom & middle mamber and 5 mm plain glass in top portion with 9 mm thick pre laminated board in bottom portion fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle no. 1855 including all cost of labour, T&P, hire charges of drilling machine, etc. complete as per direction of EIC.

Supplying, fitting, fixing up window (sliding type) made up aluminium section 9778 as windows frame, section No 4095,4096 and 9777,3994 as shutter frame with 5mm thick black glass as penal fitted with rubber beading including locking arrangement including all fitting, cost of materials all taxes etc. complete as per direction of EIC.

Supply, fitting & fixing of HDMR / WBC Door along with chaukath of Black cobra/ Century/ Green Ply including cost, conveyance etc. complete in all respect.(As per Market Rate)

Supplying, fitting, & fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with balustrade of 32mm x 32mm x 2mm in 3 row in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.

Antitermite treatment chemical emulsion IMIDACLOPRID 30.5 SC including all cost etc complete.

6 Providing & fixing gyp board suspended false ceiling with 12.5mm thick MR Ultra Gyp board (Single Layer) Gyproc make with drop ceiling as per approved design with cove light provision for different spaces as per the requirement with G.I. framework (Gyp steel) of perimeter channels, intermediate, channels and ceiling sections) and 12.5mm taped edge gyp board (MR) screw fixed to ceiling section as per design, complete including all cost of materials, labour, overheads T&P etc. complete as per the direction of the Engineer in-charge.

Shifting of office stationery, godrej, table, chair, computer & fittings including conveyance etc. complete.

Cleaning of debrise from wastage of office building including transporting etc. complete.

Please Enable Macros to View BoQ information