Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
1 Oct 2026, 3:00 pm4d left
EE(M-IV)SWZ
Office of the Executive Engineer, M-IV/SWZ, Room No. 507, 5thFloor, Zonal Building, Dhansa Stand, Najafgarh New Delhi-43
Providing and placing of precast RCC benches (chair bench with back rest and providing and fixing victorian type garden benches of approved design having both sides arms made of moulded single peace cast iron in Ward no. 137 Mahavir Enclave/NGZ.
2026_MCD_292113_1
EE (M-IV)-SWZ/MCD/2026-27/35
Open Tender
Civil Works
Item Rate
60 days
EE(M-IV)SWZ
Please refer Tender documents.
2 documents required · 2 mandatory
₹590
₹20,000
24 Sept 2026
24 Sept 2026
1 Oct 2026
24 Sept 2026
1 Oct 2026
24 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and placing | |||||
| 1.01 | Providing and fixing of precast RRC chair bench with arm rest each bench consists of 2 no. L-shaped base support in grey cement colour (thickness 80 mm x90 mm, 890 mm back height; 450 mm front height with base width 690 mm) and 1 no. reinforced concrete plank in red colour of size 1500 mm x 400 mm x 50 mm and 1 no. of reinforced concrete plank in red colour of size 1500 x 425 mm x 50 mm total height of the bench 890 mm manufactured using cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 stone aggregate 12.5 mm nominal size) using vibro compaction process reinforced suitably to prmote long use and to prevent damage during handling. Transportation & erection, alll parts are joined together with galvanised nuts and bots of suitable size and all bolts are sealed after assembley, bench top and back planks are treated with special anti-corrosive water proof coating so as to make surface glossy and water proof and as per direction of Engineer-in-Charge. | 38 | Each | - | - |
| 1.02 | Victorian type garden bench of approved design haing both side arms made of moulded single piece cast irong having weight not less than 48 kg with back height 720mm (+ 5 mm) and seating height 390 mm (approximate). Both side arms of bench shall be connected with 11 numbers M.S. Tubes, rectangular type 65x25 mm and 16 SWG gauge thick of length 1500mm for seating and back purpose with extra support of seating position of bench with 25x5 mm M.S. flat. The bench shall have the provision of hold fasts fixed with all he four legs
embedded in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of blocks of size 0.23x.0, 23x0.30 metre including excavation of pits for four concrete blocks including primer and painting with approved quality of enamel paint like Berger, Asian, Nerolac paints etc. Minimum weight of bench shall be 90 kg per bench. (The weight of all the steel per entire satisfaction and direction of Engineer-in-Charge.
Note: 1. The rate is inclusive of the cost of CC Block and excavation.
2. For weight less than 90 kg recovery on pro-rata base shall be made.
3. No payment shall be made for weight more than 90 kg. | 35 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.65 MB
35-08.pdf
Tender Documents • 0.82 MB
BOQ_340616.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .