Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.2 LAccepted-AOC 154 155 SUBATHU DISTT SOLAN 173206 | SOLAN | SOLAN | HIMACHAL PRADESH | 173206 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹32.6 L+₹1.4 L (4.55%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹35.0 L+₹3.8 L (12.2%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹39.0 L+₹7.8 L (24.9%)Rejected-AOC H NO 24 BEHIND GURUDWARA JUTOGH CANTT SHIMLA HP 171008 | SHIMLA | HIMACHAL PRADESH | 171008 | L4 | Rejected-AOC Other than lowest bidder |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
2 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rahul Meena, IDSE, EE, Garrison Engineer
GARRISON ENGINEER KASAULI, DISTT SOLAN (HP) PIN 173204 PH 01792273107
COMPREHENSIVE MAINT OF MD ACCN AT 14 GTC SUBATHU UNDER GE KASAULI
2023_MES_584262_2
GEK-89/2022-23
Open Tender
Civil Works
Item Rate
180 days
Subathu under GE Kasauli
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE KASAULI
₹96,000
Yes
11 May 2023
11 Apr 2023
9 May 2023
11 Apr 2023
2 May 2023
18 Apr 2023
Amount
Schedule 'A' Section - I
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-In- Charge.
M&L for first quality joint free Non Skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) complete all as specified and directed by Engr-In- Charge.
M&L for 1st quality, joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4, complete all as specified and directed by Engr-In- Charge.
M & L Vitrified ceramic tiles light shade 7 to 8 mm thick (square/rectangular) polished area of each tiles exceeding 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. 15mm thick screed bed or bedding layer in C.M 1:6 etc complete all as specified & as directed.
All the same as per here-in-above but vitrified tiles of size on vertical surfaces such as skirting set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. rendering 15mm thick in C.M 1:3 on brick work or concrete surfaces etc. complete all as specified & as directed.
Supply and fix in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as dircted by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.50 sqm complete all as specified and as dircted by Engineer-in-Charge.
Supply and fixing 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading) in squares n.exc. 0.5 sqm in each pane complete all as specified and dircted by Engineer-in-Charge.
Supply and fixing bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms ) for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Supply and fixing bib cock with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.
Supply & fixing 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair complete all as specified and directed.
S & F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified and directed by Engr-In- Charge.
S & F in repairs Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-In- Charge.
Supply & fixing in repairs brass chromium plated tubular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified.
Supply & fixing 15mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for 15mm bore iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.28 kg as approved, fixed as in repairs complete all as specified and directed.
Supply & fixing 20mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.45 kg as approved, fixed as in repairs complete all as specified and directed.
Supply & fixing for 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) fixed as in repairs complete all as specified and directed.
Supply & fixing for 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) fixed as in repairs complete all as specified and directed.
Supply and fixing central hole Basin Mixer,washbasin/bathroom/kitchen without poupwaste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.
Supply & fixing chromium plated shower rose with or without swivel joints 100mm dia including fixing to steel pipe, fixed as in repairs complete all as specified and directed.
Supply & fixing of PVC waste down pipe of 40mm bore complete all as specified and as directed.
Supply & fixing of PVC waste down pipe of 32mm bore complete all as specified and as directed.
Supply and fixing 15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed.
Supply and fixing 15mm dia PVC connection with PTMT nut, of length 750mm, fixed as in repairs complete all as specified and directed.
Supply and fixing PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing complete all as specified & directed.
S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.
S & F in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 15mm bore iron pipe complete all as specified and directed by Engr-In- Charge.
S & F in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 20mm bore iron pipe complete all as specified and directed by Engr-In- Charge.
Material and labour for sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repairs complete all as specified and directed.
Supply & fixing stainless steel plate rack, made out of 1.00mm thick sheet of size 24"x36"x10" deep, ISI marked, fixed as in repairs complete all as specified and directed.
Supply & fixing wash hand basin, vitreous china, white, decorative type, flat or angle back, size 550mm x 400mm incliding cutting for and pinning in ends of brackets or erecting stand but exclusive of piller tap fancy type and waste pipe, fixed as in repairs complete all as specified.
Vitreous china squatting pan, "Orissa pattern" of size 580 x 440 mm white with integral foot rests, cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan, flushing cistern, flush pipe, PVC connection for water supply to flushing cistern etc complete fixed in repair.
Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site complete all as specified and directed by Engr-In- Charge.
Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including ball brass valve 20mm bore complete all as specified.
Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site complete all as specified and directed by Engr-In- Charge.
Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including ball brass valve 20mm bore complete all as specified.
Disconnecting water tank exc 250 & nexc 500 ltrs existing tanks, setting aside (or lowering if required) forrep airs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)
Disconnecting water tank exc 500 & nexc 1000 ltrs existing tanks, setting aside (or lowering if required) forrep airs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.exe 250 & nexc 500 capacity water tank complete all as specified and directed by Engr-In- Charge.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.exe 500 & nexc 1000 capacity water tank complete all as specified and directed by Engr-In- Charge.
S& F in repairs Viterious china toilet paper holder colour all as specified and as directed.
S&F Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed by Engr-In- Charge.
Taking up or down 15 mm dia steel tubing and connection and removal at site directed by Engr-In Charge.
Taking up or down 20 mm dia steel tubing and connection and removal at site directed by Engr-In Charge.
Supply and fixing 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed.
Supply and fixing 20mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as spd & directed.
Refixing old 15mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.
Refixing old 20mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.
Refixing old 25mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.
Supply fixing in repairs viterous china wash down water closet pan (pedestal patten),white with flushing cistern , brackets and flushing pipe, seat cover, complete and making all necessary connection to make the system fully functional, complete all as specified and as directed .
Supply fixing Helth facut (ABS body) mild steel chromium plated sutable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as respect as specified
Supply fixing Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) and fixed in position complete all as respect as specified
Supply fixing Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) and fixed in position complete all as respect as specified.
Supply fixing Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) and fixed in position complete all as respect as specified.
Supply fixing Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) and fixed in position complete all as respect as specified.
Supply& fixing Soap dish, any type, fixed to plugs with chromium plated brass screws and fixed in position complete all as respect as specified.
Supply & fixing pre-laminated particle board 19mm thick, interior grade pre laminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber / steel frame work as in shelves or shutters or wall panelling, fixed as in repairs complete all as specified and directed.
Material & labour piano hings, mild steel bright finish width of flap 30mm fixed in repair including taking out the existing complete all as specified and directed.
Supply & fixing magnetic catches 100 mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed.
Supply & fixing 40mm dia cupboard knob of brass, polished, fixed with nut screw and washer, fixed as in repairs complete all as specified and directed.
Taking down carefully copper/AImn point wiring (Light,Fan/Point Socket or power) (fittings such as switches ceiling roeses, pendent, regulators, sockets etc to be measured & paid seprately) & making good to disturbed surface of walls/floors etc complete all as specified and directed by Engr-In- Charge.
M&L point wiring using approved colour coding as per IS with stranded FRLS copper conductor single core 1.5 Sqmm (Nominal area), PVC insulated cable in and incl casing-n-caping medium grade with all connecting accessories incl mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated FRLS copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified. Note : (i)Switch/sockets shall be measured and paid for separately. contaractor provided wiring diagram board.
One light point controlled by one switch complete all as specified and directed by Engr-In- Charge.
One bell point controlled by one switch complete all as specified and directed by Engr-In- Charge.
One switch socket outlet 3 pin,5 Amp on the independent board complete all as specified and directed by Engr-In- Charge.
One switch socket outlet 3 pin,5 Amp on same board complete all as specified and directed by Engr-In- Charge.
One light point controled by two way switches with cables 1.5 Sqmm size complete all as specified and directed by Engr-In- Charge.
All as per item No 63.00 here-in-before but with 1100 volts grade stranded FRLS copper conductor single core 4 Sqmm (Nominal area )single core flame retardant low smoke (FRLS) PVC insulated and unseathed cable ISI-694 marked TEC and FIA approved in and including PVC casing-n-caping. ISI marked with all accessories PVC junction boxes mild steel sunken boxes (terminal boxes) made out of 1.5 mm thick MS steel suitable for switches/ sockets with earth dolly duly painted both internally and externally with two coats of anti corrosive paint over a coat of red oxide primer covered with and including 3 mm thick plastic laminated sheet including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper condutor 4 sqmm (nominal Area), 1100 volts grade single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified and directed. Note : (i)Switch/sockets shall be measured and paid for separately.
M&L point wiring using approved colour coding as per IS with stranded FRLS copper conductor single core 1.5 Sqmm (Nominal area), PVC insulated cable in and incl PVC conduit (ISI marked) including cutting chiseling and grouting in any type wall concealed PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories incl mild steel sunken boxes suitable for mounting switch/sockets with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer incl mounting frame over cover plate, covered with 3mm thick plastic laminated sheet, incl PVC insulated FRLS copper conductor 1.5 Sqmm (Nominal area) single core PVC cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified. Note : Switch/sockets shall be measured and paid for separately.
One light point controlled by one switch complete all as specified and directed by Engr-In- Charge.
One switch socket outlet 3 pin,5 Amp on the independent board complete all as specified and directed by Engr-In- Charge.
One switch socket outlet 3 pin,5 Amp on same board complete all as specified and directed by Engr-In- Charge.
One light point controled by two way switches with cables 1.5 Sqmm size complete all as specified and directed by Engr-In- Charge.
One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sqmm size complete all as specified and directed by Engr-In- Charge.
All as per item No 65.00 here-in-before but with 2 single core PVC insulated FRLS and sheathed copper conductor of size 4 Sqmm in and including PVC conduit (ISI marked) including cutting chiseling and grouting any type wall concealed PVC conduit pipe, tee, elbow and bend etc.and with all connecting accessories with 4Sqmm PVC insulated FRLS copper conductor as earth wire and connecting to common earth dolly for 6 pin 16 Amp socket outlet on the independent board.using 4 sqmm copper cable.
S&F Lamp holder,PVC insulated body, with back plate suitable for batten fitting complete all as specified and directed by Engr-In- Charge.
M& L switch piano, flush type, single pole 1 way 6 Amp,ISI marked completeall as specified
S&F switch piano flush type, single pole 1 way 16 Amp complete all as specified and directed by Engr-In- Charge.
M& L socket 5 pin 6 Amp piano flush type,ISI marke complete all as specified and directed by Engr-In- Charge.
S&F socket out let 2 in one 6 pin 6 & 16 Amp complete all as specified and directed by Engr-In- Charge.
S & F bell,AC 240 volts,single pole,ding dong type complete all as specified.
S&F bell push, 6 Amps, SP, flush type complete all as specified and directed by Engr-In- Charge.
S&F ceiling rose, 3 phase/ PVC/ polycorbonate,isolate bady complete all as specified and directed by Engr-In- Charge.
M& L switch piano, flush type, single pole 2 way 6 Amp,ISI marked complete all as specified and directed by Engr-In- Charge.
Taking down carefully storage type water heater (Geyser ) of any make of capacity 25Ltrs after removing all electrical and water connection from installed position and supply & fixing Electric storage water heater (vertical type) 25 litres, with porcelain enamel glass lined inner tank 230 V, AC, Single phase, IS 2082 Marked, 5 Star rating, with 15mm brass non return valve and including connecting fastners not less than 100 mm with suitable nut, bolt & washers grouted in walls with complete masonry work for proper mounting of Geyser fastning bolts etc as directed as site reqmt and making necessary inlet and outlet water & electric connection tested on load including provision of 15 Amp plug top and PVC insulated & PVC sheathed copper conductor cable 4 sqmm 3 core upto 15 Amp plug point and inlet and outlet copper connection complete all as specified and directed.
S & F LED bulb 10 watt complete all as specified and directed by Engr-In- Charge.
Supply and fixing in replacement Decorative box type fitting Pre-wired for and warm light yellow colour incl LED tube 18/20 watt 6000K 4 ft IP20 linear LED T8 tubular lamp with extruded aluminium/PC body and PC diffuser complete with inbuilt driver complete all as specified and directed.
Supply and fixing in replacement wall Mounting LED fitting 12/16 watt 6000K 2 ft Basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver complete all as specified and directed.
S&Fin replacement round shape 6W 220volts AC 6500k recesed type with high efficency PMMA diffuser soft glare free light complete with drivers,holders LED Lamp suitable for roof ceiling including connecting up with 3 core flexible copper cable fixed as in repair complete all as specified and directed.
S&F sleek LED mirror light with diffuser 10 W watt along with all accessories prewired including connecting with copper flexible cable of size 0.7 Sqmm 3 core and all as specified and directed.
S & Fin replacement Bulkhead luminaire Decorative Energy saving new generation 10W LED IP65 with opal diffuser incl electronics driver & connection with copper flexible cable 3 core complete all as specified and directed.
Supply in replacement aluminium extruded energy efficient 09W inverter bulb with inbuilt Li ion battery for power backup of 2 to 3 hrs with SS & MsMS zinc plated and passivated hardwares, IP20 ingress protection, LM80 certified LED complete all as specified and directed by Engr-In- Charge.
Supply in replacement aluminium extruded energy efficient 12W inverter bulb with inbuilt Li ion battery for power backup of 2 to 3 hrs with SS & MsMS zinc plated and passivated hardwares, IP20 ingress protection, LM80 certified LED complete all as specified and directed by Engr-In- Charge.
Supply in replacement aluminium extruded energy efficient 22W inverter batten with inbuilt Li ion battery for power backup of 2 to 3 hrs with SS & MsMS zinc plated and passivated hardwares, IP20 ingress protection, LM80 certified LED complete all as specified and directed by Engr-In- Charge.
Opening out the Exhuast fan for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and reparing of slots, rewinding of fan motor with super enamelled copper winding wire of suitable size complete including insulating materials like varnishing etc. ressembling of fan complete all as specified and as directed.
Single pole and Neutral Sheet metal enclosure with a 2 pin and earth plug and socket complete with one SPN MCB 20 Amps complete all as specified and directed by Engr-In- Charge.
S &F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:42 protection, shrouded neutral bar and cement spill protector, TPN 4 way, 415 Volt complete all as specified and directed by Engr-In- Charge.
S &F sheet metal enclosure with double door for DBs conforms to IS:8623.III , IP:42 protection, shrouded neutral bar and cement spill protector, 8 way, 240 Volt (light db) complete all as specified and directed by Engr-In- Charge.
S & F MCB, 'B' curve SPN, 240 V, 40 Amp 240 volt breaking capacity 10 Ka complete all as specified and directed by Engr-In- Charge.
S & F MCB, 'B' curve TPN, 415 V, 40 Amp breaking capacity 10 kA complete all as specified and directed by Engr-In- Charge.
S & FIN REPAIR MCB 'B' curve single pole 6 to 32 Amp, 240 volt breaking capacity 10 kA complete all as specified and directed by Engr-In- Charge.
M&L for submain wiring with 2 single core PVC insulated FRLS cable 6 Sqmm copper conductor PVC sheathed in and including rigid PVC conduit heavy duty of suitable size incl cutting chiseling of wall and making good to disturbed surface of walls / floor etc with plastering painting etc so as to match with the existing finishes, drawn with 6 Sqmm PVC insulated copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. Note: For payment purpose 3 runs of 6 sqmm cable will be measured as one run”
M&L for submain wiring with 2 single core PVC insulated FRLS cable 6 Sqmm copper conductor PVC sheathed in and including rigid PVC casing -n-caping, drawn with 6 Sqmm PVC insulated copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. Note: For payment purpose 3 runs of 6 sqmm cable will be measured as one run”
M&L for submain wiring with 2 single core PVC insulated FRLS cable 4 Sqmm copper conductor PVC sheathed in and including rigid PVC casing -n-caping, drawn with 4 Sqmm PVC insulated copper conductor cable for earth wire fixed with shaddle and connecting to common earth teriminals complete all as specified. Note: For payment purpose 3 runs of 4 sqmm cable will be measured as one run”
Amount of credit of Rs. 98819.90 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
R. P. Suppliers and Construction Co.
AUKTA ENERGY PRIVATE LIMITED
M/S J.S.ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .