Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.2 CrAccepted-AOC FRIENDS COLONY STREET A DHANGU ROAD PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹1.2 Cr | L-1 | Accepted-AOC Lowest and Reasonable |
| 2 | L-2₹1.2 Cr+₹2.3 L (1.91%)Rejected-AOC | ₹1.2 Cr+₹2.3 L (1.91%) | L-2 | Rejected-AOC Other than Lowest |
| 3 | L-3₹1.3 Cr+₹15.6 L (13.2%)Rejected-AOC VILL BUNGDAL DADHANI P O BADHANI DISTT PATHANKOT PIN 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹1.3 Cr+₹15.6 L (13.2%) | L-3 | Rejected-AOC Other than Lowest |
| 4 | L-4₹1.3 Cr+₹16.8 L (14.2%)Rejected-AOC | ₹1.3 Cr+₹16.8 L (14.2%) | L-4 | Rejected-AOC Other than Lowest |
| 5 | L-5₹1.4 Cr+₹18.3 L (15.5%)Rejected-AOC | ₹1.4 Cr+₹18.3 L (15.5%) | L-5 | Rejected-AOC Other than Lowest |
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
11 Nov 2020, 6:00 pmClosed
CWE (AF) Jammu
CWE (AF) Jammu C/O 256 SU AF PIN 937256 C/O 56 APO
PROVISION OF PERMANENT GARAGES FOR MT VEHICLES ALONG WITH CONNECTED SERVICES AT PATHANKOT
2020_MES_372269_2
CWEAFJ-13/2020-21
Open Tender
Civil Works
Lump-sum
365 days
GE (AF) Pathankot
Please refer NIT and Tender Documents
11 documents required · 11 mandatory
₹1,000
GE (AF) Pathankot
₹2.2 L
Yes
30 Dec 2020
10 Oct 2020
13 Nov 2020
10 Oct 2020
11 Nov 2020
28 Oct 2020
Amount
Schedule 'A' Part-I (Building Work) Note : This schedule for Schedule 'A' PART-I is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under Col. 5 signifies this fact only.
Construction of Block of Garages for Type 'B' vehicles (TATA Coach) Two Bays single storey building complete all as specified and shown on drawings.
Construction of Block of Garages for Type 'C' vehicles (Lorry 5 Ton) Four Bays single storey building complete all as specified and shown on drawings.
Construction of Block of Garages for Type 'C' vehicles (Water Bowser) Five Bays single storey building complete all as specified and shown on drawings.
Construction of Block of MTR&S building complete all as specified and shown on drawings.
Construction of Single Washing Ramp complete all as specified and shown on drawings.
Sub Total i.e. Total of Schedule 'A' Part-I i.e. Serial Item No 1.01 to 1.05
Schedule 'A' Part-II (Internal Electrification) carried forward from pre-priced Schedule.
Schedule 'A' Part-III (Internal Water Supply) carried forward from pre-priced Schedule.
Schedule 'A' Part-IV (Sewage Disposal) carried forward from pre-priced Schedule.
Schedule 'A' Part-V (Road Work) carried forward from pre-priced Schedule.
Schedule 'A' Part-VI (Area Drainage Work) carried forward from pre-priced Schedule.
Schedule 'A' Part-VII (Fencing Work) carried forward from pre-priced Schedule.
Schedule 'A' Part-VIII (External Water Supply Work) carried forward from pre-priced Schedule.
Schedule 'A' Part-IX (External Electrification Work) carried forward from pre-priced Schedule.
Schedule 'A' Part-X (Miscellaneous E/M & B/R Works) (Item Rate Schedule) This Schedule is not Pre-Priced by MES and the Pre-Priced rate indicated as "Rs. 0.00" under Col. 5 signifies this fact only.
100mm thick PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in sub base of flooring, finished even and fair to receive floor finishes, complete all as specified & directed.
Precast cement concrete coloured glazed interlocking tiles 60mm thick conforming to IS-15658, any shade, colour and pattern laid over and including 20 to 30mm thick stone dust / sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles including budding and filleting joints etc. complete all as specified and directed. Note for Serial Item No 10.01 & 10.02 : These two Items are to be executed around the Single Washing Ramp (Serial Item No '05' of Shedule A Part-I) all as directed at site.
Low bay LED Light Fitting of not less than 60 Watt with adjustable height as per requirement, with pressure die cast housing suitable for suspended mounting with wide beam optics,IP 65 protection, complete with LED Driver, surge absorber as per BIS standard including connecting terminals, mounting clamp, provn for mounting in ceiling and all connected accessories complete all as specified and directed.
MCB TPN 63 Amps, 230 Volts, 10kA 'C' Series complete all as specified and directed.
MCB SPN 6 to 32 Amps, 230 Volts, 10kA 'C' Series complete all as specified and directed.
MCB SP 6 to 32 Amps, 230 Volts, 10kA 'C' Series complete all as specified and directed.
LED Light Fittings 05 Watts, 230 Volts, indoor type wall mounting type made up of polycarbonate with lamp holder, LED Lamp 7W, with B-22 base, connector block etc complete with all accessories, pre-wired complete all as speciifed and directed.
Exhaust Fan 300 mm sweep single phase 230 volts 50 Hz AC supply totally enclosed motor in metallic body with die cast aluminium rotor complete with louvers including cutting chases for fixing fan, connecting electrically using suitable size PVC insulated flexible copper conductor cable over all sheathed complete all as specified and directed.
Exhaust Fan 450mm sweep single phase 230 volts 50 Hz AC supply totally enclosed motor in metallic body with die cast alumn rotor complete with louvers including cutting chases for fixing fan, connecting electrically using suitable size PVC insulated flexible copper conductor cable over all sheathed complete all as specified and directed.
Ceiling Fan 1400mm sweep single phase 230 volts 50 Hz AC supply totally enclosed motor with die cast aluminium rotor complete with down rod, including hanging of fan, connecting electrically using suitable size PVC insulated flexible copper conductor cable over all unsheathed complete all as specified and directed.
LED Tube light Fitting 18 Watts, 230 Volts,box type with LED tube rod including LED Driver, connector block etc complete with all accessories, pre-wired complete all as specified and directed.
Flood light Fitting LED type 30 Watt with pressure die casted aluminium housing with flat glass optical cover with lens to ensure uniform distribution, IP 65 protection including LED Driver and housing of same make as of fitting as per BIS standards including connecting terminals, mounting clamp, mounting bracket if required and all other accessories reqd for fixing and making fitting operational complete all as specified and as directed.
Construction of Brick Masonary Valve Pit of size 60 cm x 60cm x 60cm (internal dimension) with 100mm thick concrete in foundation PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate), 50 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in floor finished even and fair without using extra cement, 23 cm thick brick work in cement mortar 1:4, 15 mm thick plastering in cement mortar 1:4 and flush pointing in same mortar to brick work externally, 3 mm thick mild steel sheet pit cover having provision of lifting handle and pit cover frame of angle iron 40 x 40 x 6 mm and painting to steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer to steel surface and excavation in soft/loose soil, returning filling and removal of surplus soil upto 50m distance complete all as specified and as directed.
Street Light Fitting LED type 70 Watt or higher side with pressure die casted aluminium housing IP 66 and IK 07 protection including surge protection 5 kA, LED Driver and housing as per BIS standards including connecting terminals, mounting clamp, mounting bracket of suitable size and connecting electrically using 3 core 1.5 sqmm flexible cable in and including metallic conduit from light fitting upto Junction box and all other accessories as reqd for fixing and making fitting operational on tubular pole complete as directed.
Junction box outdoor type of size not less than 0.009 cum made of steel sheet 1.6 mm thick painted with two coat of synthetic enamel paint over a coat of red oxide primer having aluminium bus bar 2 Nos of capacity 100 amps mounted on porcelain/PVC insulator suitable for connection of minimum 2 nos LT cables of size 25/35 sqmm 3.5 core including clamps, nuts and bolts etc, for and including 1 No MCB SP 6 Amps complete all as specified and directed.
MCCB FP 32 Amp, 50 Hz, 415 V with rupturing capacity 25 KA with Outdoor type Enclosure complete all as specified and directed
Supply, installation, testing and commisioning of LT electric Panel Board totally enclosed (Factory Fabricated from CPRI approved manufacturer), outdoor type double door type powder coated inside and outside made out of CRCA sheet not less than 3 mm thick with front opening having locking arrangement spray painting internally/externally, including internal wiring with suitable size of copper strip bus bar chamber 3 phase and four wire type system 415 volts 50 Hz consisting of copper bus bar of capacity 100 Amps and consisting of and including the following :-
(a) MCCB FP 63 Amp 16 kA-1 No (b) MCB SPN 5 to 32 Amps - 3 Nos (c) MCB TPN 20 Amps - 1 No (d) MCB TPN 40 Amps - 1 No (e) Digital panel meter for Amp, Volt, KWH, Power Factor and other parameter - 01 No (f) Indicator Lamp with Holder - 01 Set of 03
Sub Total i.e. Total of Schedule 'A' Part-X i.e. Serial Item No 10.01 to 10.17
INDERJIT SINGH
M/S CANTILEVER ENGINEERS
Faith Builders
M/S. RAJESHWAR SINGH.
Sanjay Constructions
Bidder Name
INDERJIT SINGH
M/S. RAJESHWAR SINGH.
Faith Builders
M/S SINGH AND ASSOCIATES
Sanjay Constructions
M/S CANTILEVER ENGINEERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .