Construction of composite work such as Main Entrance Gate, Canopy (front side), 2 Nos. RCC cantilever portico (back side), Landscaping, Beautification and lighting, Kitchen and driver rest room of composite office building for Sambalpur Municipal C

Amount

Earth work in ordinary soil within 50m. initial lead and 1.5m. initial lift including rough dressing and breaking clods to maximum 5Cm. to 7Cm., laying in layers not exceeding 0.3m., in depth and as per direction of the Engineer-in-charge.

Earth work in Hard soil within 50m. initial lead and 1.5m. initial lift including rough dressing and breaking clods to maximum 5Cm. to 7Cm., laying in layers not exceeding 0.3m., in depth and as per direction of the Engineer-in-charge.

Earth work in Hard soil within 50m. initial lead and 1.5m. initial lift including rough dressing and breaking clods to maximum 5Cm. to 7Cm., laying in layers not exceeding 0.3m., in depth and as per direction of the Engineer-in-charge.

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer-in-charge.

Supplying, filling in foundation and plinth with sand, watered and rammed including cost, conveyance & royality and all taxces of materials cost of all labour with T&P etc. complete.

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Providing and lying plain cement concrete of proportion (1:4:8) in foundation and floors using cement with 4 cm. size black hard crusher broken granite stone metal of approved quality and from approved quarry, washed and cleaned including hoisting,lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. Thick including cost, conveyance, loading and unloading, royalties and taxes all materials and cost all labours, sundries, T&P required for the work complete including dewatering if required as per instruction of the Engineer in charge.

Providing and lying M-30 grade with 20mm and down grade black hard granite (crusher broken) stone chips including hoisting and laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. Thick including cost, conveyance, loading and unloading, royalties and taxes all materials and cost all labours, sundries, T&P required for the work complete including dewatering if required as per instruction of the Engineer in charge.

Providing and lying plain cement concrete (1:2:4) with 12 mm. size hard broken granite chips size black hard crusher broken granite stone metal of approved quality and from approved quarry, washed and cleaned including hoisting,lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. Thick including cost, conveyance, loading and unloading, royalties and taxes all materials and cost all labours, sundries, T&P required for the work complete including dewatering if required as per instruction of the Engineer in charge.

Straightening bent up or coiled M.S. rod or HYSD steel (Fe- 415), cutting, bending, cracking, hooking, welding or jointing (if required), the M.S rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as required for RCC works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour charges required for the work etc complete .

Rigid and smooth centering and shuttering for P.C.C. works including false work and dismantling them after casting including cost of materials complete in ground floor. P.C.C. foundation and plinth band, footings, bases of columns, mass concrete, precast slabs etc.

Rigid and smooth centering and shuttering for R.C.C. works including false work and dismantling them after casting including cost of materials complete in ground floor. R.C.C. foundation and plinth band, footings, bases of columns, mass concrete, precast slabs etc

Rigid and smooth centering and shuttering for R.C.C. works including false work and dismantling them after casting including cost of materials complete in ground floor. R.C.C. beams, columns, girders and bressmers etc.

Rigid and smooth centering and shuttering for R.C.C. works including false work and dismantling them after casting including cost of materials complete in ground floor. R.C.C. walls and fins including attached pillasters

Rigid and smooth centering and shuttering for R.C.C. works including false work and dismantling them after casting including cost of materials complete in ground floor. R.C.C. Floor roof slabs, landings, balconies, projecting sun-shades and chajjas upto 4.3m.height

Rigid and smooth centering and shuttering for R.C.C. works including false work and dismantling them after casting including cost of materials complete in ground floor. Double stage centering & shuttering for roof slabs, balconies and projections above 3.60m and upto 7.20 m height.

Dismantling of Reinforced cement concrete grade M-20 & above including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres if required as per instruction of the Engineer in charge.

Dismantling Brick in cement mortar including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres if required as per instruction of the Engineer in charge.

Brick work with Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2% in cement mortar (1:6) in foundation and plinth.

Brick work with Fly ash bricks of 23 Cm. x 11 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance ± 2% in cement mortar (1:6) in Super structure.

Providing & fixing 12 to 18mm thick Natural stone of apropriate size of 600x150mm up to 10m height over the exposed surface of RCC column, using chemical adashive (Kerakole bioflex grey), grouting the joints with apropiate mathing chemical, further to enhance the colur of stone by applying the PU coating over the surface area of clading etc. complete, all inclusive of labour, scaffolding, T&P and sundries. as per directions of the Engineer-In-Charge.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : (above 0.40 Sqm Granite Tile)

Providing and fixing10mm thick Granite glazed stone (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing 18mm thick edge moulding to Granite stone counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Granite work

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Supplying and fitting - fixing of Un-Plasticised Poly Vinyl Chloride (UPVC) (Fenesta/NCL VEKA LTD.) Three Track Three Panel / Two Track Two Panel sliding window--60- Series duly manufactured using UPVC Reinforced profile of 108mmx45mm x 2.5mm for outer frames and window sash of 39mmx58mmx2.25mm for capable of mounting single glazing system,structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefebricated & welded through fusion welding the window frame shall be shall be fitted with 6 mm thick clear toughen glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistance and the system is to be installed using Reinforced large coupler at the site using anchore fastners,silicon rubber sealant,easy glazing/deglazing at site etc.including cost and conveyance of all materials,accessories,labour charge,material and product conforming to ASTM D 638-14,EN-477-95 and other applicable code and standards all complete as per direction of Engineer in charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 45 x 70 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

Providing and fixing stainless steel tower bolts (barrel type) with necessary screws etc.of approved make like HELIX ,ZECON , PRAG etc and is equivalent to Pentagone model of Helix complete as per direction of Engineer in charge. 150x10 mm

Providing and fixing stainless steel sliding door bolts with necessary screws etc of approved make like HELIX ,ZECON , PRAG etc and is equivalent to Stylo model of Helix complete as per direction of Engineer in charge . 250x16 mm

Providing and fixing Stainless Steel Plate Handle Round Heavy 150mm length with necessary screws etc of approved make like HELIX ,ZECON , PRAG etc all complete as per the direction of Engineer-in-charge. 150 mm

Providing and fixing Stainless Steel Plate Handle Round Heavy 200mm length with necessary screws etc of approved make like HELIX ,ZECON , PRAG etc all complete as per the direction of Engineer-in-charge. 200mm

Providing and fixing stainless steel door latch 12 mm dia 250 mm length of approved make like HELIX ,ZECON , PRAG etc with necessary screws bolts, nut and washers etc.all complete as per direction of Engineer in charge.

Providing and fixing 06mm T/G + 1.5 PVA + 06mm T/G LAMINATED GLASS with crystal edge polish including DORMA SPIDER fittings for Canopy-1, weather silicon sealant etc. complete over CANOPY STRUCTURE in all respect as per the details drawing including cost of all material, labour, T&P, Scaffolding, transportation, loading & unloading as per direction of the Engineer in charge.

Providing and fixing 06mm T/G + 1.5 PVA + 06mm T/G LAMINATED GLASS with crystal edge polish including DORMA SPIDER fittings for Canopy-2 & 3, weather silicon sealant etc. complete over CANOPY STRUCTURE in all respect as per the details drawing including cost of all material, labour, T&P, Scaffolding, transportation, loading & unloading as per direction of the Engineer in charge.

Providing 16 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement finished smooth to brick masonry over un-even surface walls after racking out joints including watering and curing rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.

Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge.

Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) with cement finished smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge

Providing and painting two coats with synthetic enamel paint of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height over a coat of primer of approved quality and shade including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge.

Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.

Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wall smooth with a coat of plaster pairs including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge.

Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge.

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Providing and fixing Glass Reinforced Concrete (G.R.C) Screens in approved size, pattern, design, shadeand thickness of 50mm on frame and design element in 30mm thick have weight approximately between 3.5 – 4 Kg per Sq. Ft. and color of M/S UniStone make or equivalent. The above weight and thickness is considering dimensions of screens up to 2133mm in height and 1219mm in width and having at least 50% void space. The screens should be made from ‘53 grade’ White Portland Cement manufactured by ‘JK Cement’ or equivalent, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber manufactured by ‘N.E.G JAPAN’ or equivalent, Super Plasticizers manufactured by ‘BASF’ or equivalent, Polymers manufactured by ‘BASF’ or equivalent and U.V resistant Synthetic inorganic pigments should be used for pigmentation manufactured by ‘BAYFERROX (Germany)’ or equivalent. The material casting should take place in FRP Molds. The fixing of Screens should be ‘Dry fixing’ i.e. to be done with M.S Galvanized Clamps, fixtures and fasteners of Hilti / Fischer.

Supply and fixing of SMC Logo Size 1.2m X1.2m made Stainless Steel (AISI 304) on 1.5MM Thick Sheet including Laser Cutting, UV Printing of SMC Logo bending the Sheet , fabricating & Polishing etc. complete as per the direction of Engineer-in-charge.

Supply and fixing of SMC Logo Size 0.9m X0.9m made Stainless Steel (AISI 304) on 1.5MM Thick Sheet including Laser Cutting, UV Printing of SMC Logo bending the Sheet , fabricating & Polishing etc. complete as per the direction of Engineer-in-charge.

Supply and fixing of Letters ସମ୍ବଲପୁର ମହାନଗର ନିଗମ made of SS 304 mat finished 1.5MM thick sheet including Laser Cutting, bending the Sheet, fabricating & Polishing etc. complete as per the direction of Engineer-in-charge.

Supply and fixing CNC cut designers plate made of 800mm dia. / 760 X 400mm SS 304 mat finish 3mm sheet as per the drawing and design and the direction of Engineer-in-charge.

Water Feature & Fountain Nozzle Supply of Foaming Jet Nozzle (Water Level Independent), Size 1", Made with Tombac / Stainless Steel.

Providing, fixing, testing & commissioning of UPVC pipe Sch 40 including heavy duty fittings (Sch 80) such as tees, crosses, plugh, elbow, reducers, flanges, union, sleeves, pieces, check nut complete. 1" dia UPVC Pipes

Providing, fixing, testing & commissioning of UPVC pipe Sch 40 including heavy duty fittings (Sch 80) such as tees, crosses, plugh, elbow, reducers, flanges, union, sleeves, pieces, check nut complete. 2" Dia UPVC Pipes

Providing, fixing, testing & commissioning of UPVC pipe Sch 40 including heavy duty fittings (Sch 80) such as tees, crosses, plugh, elbow, reducers, flanges, union, sleeves, pieces, check nut complete. 3" Dia UPVC Pipes

Providing & fixing of Industrial Grade Ball valve (Body : PVC ). Tested to a pressure not less than 16 Kg/Sq.cm. Make : Plasson / Cepex / Equivalent. 1" Dia Ball Valve

B) PH WORKS Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460 mm bowl depth 200 mm

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing soil, waste and vent pipes : 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing plain bend of required degree. 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm Sand cast iron S&S as per IS - 3989

Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe 100 mm dia SS 304 grade coupling with EPDM rubber gasket

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905

Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.

Providing and fixing M.S. holder bat clamp of approved design to sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. External work - Exposed on wall 25 mm dia nominal bore

32 mm dia nominal bore

40 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 50 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

32 mm nominal bore.

40 mm nominal bore

50 mm nominal bore

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 25 mm diameter pipe

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 25 mm diameter pipe

Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 25 mm diameter pipe

Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 50 mm diameter pipe

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing Bib Cock of approved quality and make as per the direction of Engineer-in-charge ARI-39037 Bib Cock with Wall Flange of Jaquar,Cat. No-F360004 Bib Cock with Wall Flange or Hindware,T3205C Bib Cock with wall Flange or Johnson or equivalent

Providing and fixing 2-Way Bib Cock of approved quality and make as per the direction of Engineer-in-charge ARI-39041 2-Way Bib Cock with Wall Flange of Jaquar ,Cat. No- F360005 Bib Cock 2 in 1 with Wall Flange or Hindware,T3208C 2 in 1 Bib Cock with wall Flange or Johnson or equivalent

Providing and fixing Angle Valve of approved quality and make as per the direction of Engineer-in-charge ARI-39053 Angle Valve with Wall Flange of Jaquar,Cat. No-: F360006 Angular Stop Cock or Hindware,T3410C Angle Cock with wall Flange or Johnson or equivalent

Providing and fixing Hand Shower (Health Faucet) of approved quality and make as per the direction of Engineer-in-charge ALD - 573 Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook of Jaquar,Cat. No- F160059 Health Faucet with 1.5m Flexible Tube & Hook (Center Controlled) or Hindware,S0426C Fantasia Health Faucet (Brass) with 1mtr CP Hose & Hook or johnson or equivalent

Providing and fixing Stainless Steel Jalli of approved quality and make as per the direction of Engineer-in- charge

C ) ELECTRICAL WORK SITC of LED Black Outdoor Wall Lamp Modern up and down long wall scone light fixtures upto 2X8Watt, 3000K waterproof wall light-Color Warm White, Made of high-quality die-cast aluminum and acrylic lampshade, the one-piece molding is not easy to break compared with other products on the market; Surface frosted paint treatment, anti-corrosion, anti-aging, anti-rust, and anti-fading, durable, IP-66 model, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Make of PHILIPS / JAQUAR / WIPRO / FANDOM LIGHTS or Simular make)

Supplying and fixing of energy efficient LED spike light for logo, having 3watt with Aluminium housing clear glass 3000k lumen IP65, color- warm white, mount on wall and floor, complete with electronic driver and all other accessories, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Make of JAQUAR / WIPRO / PHILIPS etc or similar make)

Supplying and fixing of energy efficient LED spike light for commercial outdoor LED splash light, having 12 watt with Aluminium housing clear glass 3000k lumen IP54, mount on wall and floor, complete with electronic driver and all other accessories, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Make of JAQUAR / WIPRO / PHILIPS etc or similar make)

Supplying and fixing of energy efficient LED spike light for commercial outdoor LED splash light, having 33 watt with Aluminium housing clear glass 3000k lumen IP67, mount on wall beam etc, complete with electronic driver and all other accessories, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Make of JAQUAR / WIPRO / PHILIPS etc or similar make)

Supplying and fixing of energy efficient LED gate Top light, having die cast aluminium body, heat resistant toughened glass diffuser, IP65, polycarbonate diffuser,powder coated IP65 Features, 3000k lumen, complete with electronic driver and all other accessories, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Make of JAQUAR / WIPRO / PHILIPS etc or similar make)

Supplying and fixing of energy efficient LED gate Top light, having die cast aluminium body, heat resistant toughened glass diffuser, IP65, polycarbonate diffuser,powder coated IP65 Features, 12 watt, 3000k lumen, complete with electronic driver and all other accessories, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Make of JAQUAR / WIPRO / PHILIPS etc or similar make)

Supplying and fixing of energy efficient LED Under water light for fountain having 27watt multi colour spreding light with S S Top ABS Base protection IP68, make AFD. Mount on wall and floor. lumen output not less than 1000 lumens complete with electronic driver and all other accessories suitable for operation on 12/24V-DC supply,as required. (Make of Astralpool / SKG Tradres / Jaquar / ITC etc or similar make)

Supplying and fixing of energy efficient LED COB light for ceiling having 6watt with IP54, make AFD. Mount on ceiling. lumen output not less than 1000 lumens complete with electronic driver and all other accessories suitable for operation on 220-v supply,as required. (Make of Jaquar / Wipro / Philips or similar make)

Supplying of following size Al. conductor armoured XLPE insulated PVC sheathed power cable of 1.1 KV grade ISI marked IS:7098(Part 1) 1988 with amendment upto date as per following manner etc as required a) 4 x 10sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 4 X 10 sq. Mm (25mm)

Supplying of following size Cu. conductor armoured XLPE insulated PVC sheathed power cable of 1.1 KV grade ISI marked IS:7098(Part 1) 1988 with amendment upto date as per following manner etc as required a) 4 x 16sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 4 X 16 sq. Mm (25mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. a) Upto 35 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. a) Upto 35 sq. mm

Supplying of following size Cu. 2.5 sq.mm PVC Four Core Flat Cable as per IS 694/10 are used to connect under water pump motor with supply lines, these cables are made keeping in mind the severe operating conditions. The slot available in the tubewell being narrow the shape of the cables has to be suited for under water, including end termination etc, as required by Engineer-Incharge.

Control Panel Supply delivery installation testing & commissioning of Controle Panel, Indoor type, Wall / Floor mounted type distribution boards made out of 2mm thick CR sheet metal cubical fixed derusting primered and painted with two coat of enamel paint of approved shade, dust demp & vermin proof, having hinged doors and compartmental arrangement for each equipment & busbar chamber having consist of volt meter, Amp meter, DOL starter SMPS for lighting etc provision for cable/conduit entry earthing stip.

Supply, Installation, testing and commissioning of Single stage Submersible Cast Iron Pumpset with built-in thermal protection and automatic reset suitable for 380 volts, 5 HP, Three phase, 50 cycles A.C supply as required. ( Make : Kirloskar, KSB or similar make )

Wiring to light, ceiling fan, exhaust fan, call bell & 6A plug points with 1.5sqmm FRLS PVC insulated 1100 volt grade multistranded copper conductor wire for phase, neutral and earth continuity conductor run inside 2 mm thick regid pvc conduit pipe recessed in wall/ column/ ceiling of the building including supply of materials such as clip-in type modular switches, metallic concealed box, wire, ceiling rose, angle / batten holder, junction box etc as per technical specifications complete with making good the damages caused as required and as per direction of Engineer-in-charge. Single light point controlled by one 6A switch or first light point of group control.

Wiring to light, ceiling fan, exhaust fan, call bell & 6A plug points with 1.5sqmm FRLS PVC insulated 1100 volt grade multistranded copper conductor wire for phase, neutral and earth continuity conductor run inside 2 mm thick regid pvc conduit pipe recessed in wall/ column/ ceiling of the building including supply of materials such as clip-in type modular switches, metallic concealed box, wire, ceiling rose, angle / batten holder, junction box etc as per technical specifications complete with making good the damages caused as required and as per direction of Engineer-in-charge. Subsequent point of group control

Wiring for power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 No 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required by Engineer-Incharge.(Make-HAVELS/FINOLEX or equivalent)

Wiring for power plug with 4X6 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required by Engineer-Incharge.(Make-HAVELS/FINOLEX or equivalent)

Wiring for power plug with 2X6 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required by Engineer-Incharge. (Make-HAVELS/FINOLEX or equivalent)

Wiring for power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required by Engineer-Incharge.Make-HAVELS/FINOLEX or equivalent

Wiring for power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 1.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required by Engineer-Incharge.Make-HAVELS/FINOLEX or equivalent

Wiring for power plug with 2X35 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 35 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required by Engineer-Incharge.Make-HAVELS/FINOLEX or equivalent

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2nos 3pin 5/6 amps modular socket outlet and 2nos 5/6 amps modular switch,connection etc on same board for Computer point. as reqd by Engineer-Incharge.(For light plugs to be used in non residential buildings) Make-HAVELS/ROMA/ANCHOR or equivalent

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 1nos 3 pin 16amps modular socket outlet and 1nos 25 amps modular AC motor starter,connection etc on same board for Computer point.as required by Engineer-Incharge.(For light plugs to be used in non residential buildings).Make-HAVELS/ROMA/ANCHOR or equivalent.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing RJ-45 modular LAN socket, connection etc.as required by Engineer-Incharge. (Make-HAVELS / ROMA / LEGRAND / ANCHOR or equivalent)

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall / floor and making good the same in case of recessed conduit as required by Engineer-Incharge, used for Electrical wiring and Data networking purpose. (Make-FINOLEX / SUDHAKAR / Polycab / BEC or equivalent) 20 mm

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall / floor and making good the same in case of recessed conduit as required by Engineer-Incharge, used for Electrical wiring and Data networking purpose. (Make-FINOLEX / SUDHAKAR / Polycab / BEC or equivalent) 25 mm

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall / floor and making good the same in case of recessed conduit as required by Engineer-Incharge, used for Electrical wiring and Data networking purpose. (Make-FINOLEX / SUDHAKAR / Polycab / BEC or equivalent) 32 mm

FITTINGS & FIXTURES SITC 36W 2'x2' Surface / Recess mounting LED luminaire directly on false ceiling, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required by Engineer-Incharge. (Similar to Jaquar model no. LSVR01S036XN or similar make of PHILIPS / JAQUAR / WIPRO)

Supplying and fixing of energy efficient LED surface/recess mounted square panel with aluminium die cast housing with power rating not more than 18 W and lumen output not less than 4000 lumens complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required by Engineer-Incharge. (Make of PHILIPS / JAQUAR / WIPRO/CROMPTON GRAEAVES/HAVELS)

Supplying and fixing of energy efficient LED Tube light mounted on wall with aluminium die cast housing with power rating not more than 25W and lumen output not less than 4000 lumens complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required by Engineer-Incharge. (Make of PHILIPS / JAQUAR / WIPRO / CROMPTON GRAEAVES /HAVELS)

Supplying and fixing of energy efficient LED Tube light mounted on wall with aluminium die cast housing with power rating not more than 40W and lumen output not less than 4000 lumens complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required by Engineer-Incharge. (Make of PHILIPS / JAQUAR / WIPRO / CROMPTON GRAEAVES /HAVELS)

SITC 35 Watt decorative type Street Light, mounting on pole, LED luminaire, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. (Make :-PHILIPS / JAQUAR / WIPRO or simular make)

SITC decorative type Street Light pole, having Classic Antique, Material Aluminium and Acrylic, height 3mtr, having cable jointing box, paint antiq green/black, with concreat base and base frmae.as required.

SITC 9 Meter High Mast Pole manufactured from Mild Steel and its surface has smooth finish owning to paint coating. Having 120W LED luminaire, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. (Make of PHILIPS / JAQUAR / WIPRO) (Pole Make of Bajaj / Utkarsh / Kasper Engineering)

SITC 12watt deep round COB based swivel on Surface / Recess mounting LED luminaire directly on ceiling, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required by Engineer-Incharge. ( Make of PHILIPS / JAQUAR / WIPRO)

SITC 5 watt extruded anodized aluminium, PC diffuser on ground mounting LED 3000 lumain, luminaire directly on ceiling, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required by Engineer-Incharge. ( Make of PHILIPS / JAQUAR / WIPRO)

S.I.T.C of Energia 1200 mm sweep BEE single star rating ceiling fan i/c wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm FR PVC insulated copper conductor single core cable etc. as required by Engineer-Incharge. (Make of USHA / ORIENT / CG / BAJAJ)

SITC of 400 mm sweep Wall fan complete with blades, etc. with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including ceiling rose on the fan point outlet etc. as required by Engineer-Incharge.(Make: Usha Striker High speed or similar model of Havells/Orient )

Supply, delivery, installation & testing of following sweeps and speed of exhaust fans suitable for operation at 250 volt, 50 Hz, a.c. supply complete with a set of propeller blade, tripod leg for mounting of motor, ring frame, blades, gravity louvre complete assembly including supply of sundry materials, making hole of suitable size for housing of exhaust fan, making connection from suitable point outlet, making good the damages caused complete as required and as per direction of Engineer-in-charge. ( Make of USHA / ORIENT / CG / BAJAJ ) 300mm sweep, 900 rpm.

Supplying and fixing of energy efficient LED indoor type Stip Light mounted with power rating not more than 25 W and lumen output not less than 3000 lumens complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required by Engineer-Incharge. (Similar to Jaquar model no. LSTP03X005XW or similar make of PHILIPS / JAQUAR / WIPRO / GIFA LED)

Supplying and fixing of energy efficient LED indoor type Sport Light mounted on ceiling 35 Watt Lumens: 4900 Lumens with power rating not more than 35 Watt Lumens: 4900 Lumens and lumen output not less than 4900 lumens complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required by Engineer-Incharge. (Make of PHILIPS / JAQUAR / WIPRO )

MV CABLE & LAYING Supplying of following size Cu. conductor armoured XLPE insulated PVC sheathed power cable of 1.1 KV grade ISI marked IS:7098(Part 1) 1988 with amendment upto date as per following manner etc as required by Engineer-Incharge a) 3.5 x 25sq.mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a) 3½ X 25 sq. Mm (32mm)

CABLE TRAY: Supply & installation of following size Ladder type Cable tray with horizontal & vertical bends, reducers, Tee's,Cross over, supports, brackets and other accessories as required confirming to IS/IEC-61537.The Cable Ladder shall be made of 1.5mm thick sheet steel upto 600mm.The cable Ladder shall be galvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The cable ladder should be tested for safe working load of minimum 70 Kg/ Mtr with a span distance of 2 Mtr the deflection should be within the limits as per standard. The cable ladder shall be supplied in standard length of 3000 mm. The rung size shall be of 30x15mmm size suitable for fixing the cable clamps the space between the rungs shall be 300mm. etc. complete as required per specifications & approved by the Engineer Incharge.

EARTHING Earthing with GI earth plate 600mm x 600mm x 6mm thick i/c accessories and masonry enclosure with cover plate having locking arrangement and watering pipe etc With charcoal or coke and salt as reqd.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for earthing as required.

Providing and fixing GI tape 25mmX5mm thick for earthing as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

FLOOR TRUNKING: Providing, laying and fixing following 30 mm dia G.I. Floor Trunking in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

FIRE FIGHTING Supply and fixing following size of flexible sprinkler hose corrugated unbraided type (700mm) for fire sprinkler with 1"intel nipple BSPT, 1/2"outlet reducer BSPT, 0.7m square support Bar & bracket.(Make- E-Flax / Safex / Newage / Minimax / Superex )

Supply, installation, testing and commissioning of MS accessories such as 1"socket, tees, nipple, tapes, araldites etc as required.

Installation of Existing Detector on false ceiling with extra fire FRLS cable and all accessories etc as required

D ) HORTICULTURE AND LANDSCAPING WORK Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Rough dressing the trenched ground including breaking clods.

Rough dressing the trenched ground including breaking clods. Fine dressing of the ground.

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer- in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 60 cm dia, and 60 cm deep

Rough dressing the trenched ground including breaking clods.

Flooding the ground with water including making kiaries and dismantling the same.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Trees Plant

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge Hedge Plant /Ground cover

Providing and stacking of Clerodendrum inerme having ht. 90 cm to 120 cm multi branched in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.

Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags.

Providing and stacking of Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.

Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge.

B.C.BHUYAN CONSTRUCTION PVT LTD