GE U(N) 35 2023 24 PROVN OF VECH PARKING SHED NEAR BLDG NO NP 26 AND SR TO BLDG NO T 34 UNDER AGE B R I OF GE (N) UDHAMPUR

Amount

M&L for surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge

M&L for excavation in trenches n.exc 1.50 m wide and n.exc 1.50m in depth in foundation in hard/dense soil and getting out. complete all as specified and directed by Engr-in-Charge

M&L for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, getting out Hard/dense soil complete all as specified and directed by Engr-in-Charge

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed

M&L for returning filling in, incl spreading levelling, watering and will ramming in layers not exc 25cm complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed by Engr-in-Charge

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge

M&L for plain cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-Charge

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels incl necessary formwork complete all as specified and as directed by Engr-in-charge.

M&L for plain cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in coping incl necessary formwork, complete all as specified.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, moulds, mi-tred/stopped ends etc. complete all as specified & directed.

M&L for providing Precast RCC(1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in manhole/drain covers including necessary formwork required including setting in cement mortar (1:4), complete, all as specified and as direced.

M&L for providing, Pre cast cement concrete 1:2:4 type B-1 (20mm graded) as in kerb stones and in similar works bedded and jointed in cement morter 1:4, complete all as specified and as directed by Engr-in-charge. (Size : to be approved by Engr-in-charge.

M&L for painting on kerb stone etc. Surfaces of any description over 10cm girth or width, not otherwise described over 10 cms widht or girth and applyng two coats of synthetic enamel paint over and including a coat of cement primer surface complete all as specified and directed by Engr-in-Charge

M&L for dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick(AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick(AZ-150) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and directed by Engr-in-Charge

M&L for dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed by Engr-in-Charge

S&F steel work in tubular section including special shaped washer etc. complete using ERW or induction butt welded tubes confirmming to IS1979 gde St-240 complete all as specified and directed by Engr-in-Charge

S&F roof trusses (framed) , trussed , purline, cross gantries and fastening and heavy brakets framing (Beam, tee, angle,channel or flat section ) including distance pieces Fe-410 gde (E-250) quality A complete all as specified and directed by Engr-in-Charge

S&F Mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut in any sizes complete all as specified and directed by Engr-in-Charge

S&F plain 1.25 mm thick , black , mild steel sheeting in ridges, hips, valley gutters drip and straight flashing (length and girth as fixed) complete all as specified and directed by Engr-in-Charge

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge

M&L for demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L for 50 mm thick plain cement concrete type C-1 1:3:6(Using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed. Note : The plinth protection shall be laid in panels and length of the each panel shall not be more than 2.00 metre all as directed. 6mm joints filled with 85/25 grade bitumen and sand (1:3 ratio) shall be provided. No deduction for joints shall be made while making payment against the above item complete all as specified and directed by Engr-in-Charge

M&L for hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by Engr-in-Charge

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base to receive floor rough finishes complete all as specified.

M&L for 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base to receive floor finishes complete all as specified.

M&L for 100 mm thick cement concrete type D-2 , 1:4:8 using 40mm graded aggrigate as in subbase complete all as specified and as directed.

M&L for dismantling of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-Charge

M&L for machine cut kota stone slab flooring 18-20mm thick over 20 mm th cement screed in CM 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge

Ditto but on vertical surfaces as risers, skirtting incl M&L 5 mm thick screed in CM 1:4 complete all as specified and directed by Engr-in-Charge

M&L for marble strip cut to width n.exc 100mm wide fixed as border in stair case walk ways,strip for floor etc.,over 25 mm thick cement screed in CM 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed by Engr-in-Charge

M&L for stone slab 25mm to 35 mm thick dressed true and square, in one length not less than 60cm and n. exc 120 cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edged rounded or chamfered as directed, set, jointed and pointed 15 mm th cement screed in CM(1:4) complete all as specified and directed by Engr-in-Charge

M&L for machine pressed precast conrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed by Engr-in-Charge

M&L for sand filling in floors or pavings, laid in layers n.exc 15 cm thick,spread,levelled, and blinded with earth and rammed including watering complete all as specified and directed by Engr-in-Charge

M&L for providing cement concrete 1:2:4 type B-1 Using 20 mm graded stone aggregate as in kerb and in similar works bedded and jointed in CM 1:6 incl necessary exc if necessary complete all as directed & specified.

M&L for demolition of Brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and recast concrete articles all as specified.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM(1:6) with old size bricks complete all as specified and directed by Engr-in-Charge

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed by Engr-in-Charge

M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge

M&L for rendering 15 mm thick in cement mortor 1:4 on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L for rendering 10 mm thick in cement mortor 1:6 other than fair faces of brick work or concrete surfaces complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified.

M&L for preparation of plastered surfaces of wall and applying two coats of cement base paint over one coat of cement primer new surfaces including 1 mm thick exterior wall care putty ( to be applied in two coats) all as specified. Note: Putty surface shall be rubbed with emery paper to form even and smooth surface complete all as specified and directed by Engr-in-Charge

M&L for two coat of cement base paint over a coat priming plastred and other surfaces with alkali resistant primer paint including preparation of old plastered of wall complete all as specified and directed by Engr-in-Charge

M&L for complete removal of existing treatment,preparation of surfaces and applying two coats of oil bound distember over one coat of primer paint over and including wall care putty on old surfaces complete all as specified and directed by Engr-in-Charge

M&L for two coats of oil bound distember over a coat of primer over two coats of approved wall care putty over and including preparation of new plastered surfaces of wall complete all as specified and directed.

M&L for taking down Chowkats or frames not exc 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge

M&L for taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.m each (Without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge

S&F 35 mm thick 2nd class HW rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle boardwith commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge

S&F 125x 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engr-in-Charge

M&L for providing and fixing power coated aluminium (minimum thickness of power coating 50 micron) for shutters of doors,windows and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprane gasket required (fitting shall be paid for seprately) with extruded built up standard tubular section /appropriate Z section and other section of approved make conforming to IS:733 and IS:1285 fixing with dash fastner of required dia and size, including necessary filling up the gaps at junctions i.e. top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminiums section shall be smooth ,rust free,straight mitred and jointed mechanical wherever required including cleat angle, aluminium snack beedingfor glazing/ panneling , CP brass / stainless steel screws all as complete as per architectural drawing and the direction of Engineer-in-charge.

S&F Glazing with 5mm thick frosted/tinted sheet glass exc 0.50 sqm in each panel fixed to aluminium section of doors, windows and fixed frame with suitable EPDM rubber packing and powder coated aluminium beading to frame complete all as specified.

M&L for anodised aluminium grill ( anodised transparent or dyed to required shade according to IS: 1868 with aminium anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre , including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requiremnet and direction of Engineer-in-charge.

S&F stainless steel mosquito proof wire cloth of stainless 0.36mm dia and 1.4mm aperture fixed with aluminium flat/channel and screws all as specified as directed by Engr-In-Charge.

M&L for 35 mm Glazed and skeleton shutters, 2nd class H.W open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or gorged into spikes, framed guard bar, barred iron doors; ladder, framed balusters; railing; frame work for water tanks, cooler stand etc and similar work conforming to Fe 290 or Gde-E-165, complete all as specified and as directed.

M&L for preparation of old steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over preprimed surfaces, complete all as specified and as directed by Engr-in-Charge.

S&F in 3mm sheet glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge

S&F 250 mm Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on olt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-Charge

S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge

S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge

S&F 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge

S&F small fittings 1st class hard wood such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed by Engr-in-Charge

M&L for two coat of syenthetic enamel paint on wooden surfaces over a coal of pinkprimer incl preparation of new Surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed by Engr-in-Charge

M&L for formwork to soffits of suspended slabs such as beams & similar work,not exc 200mm thick(horizontal or sloping) rough finishes surfaces of cocrete flat complete complete all as specified and directed by Engr-in-Charge

M&L for nominal mix RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in coping,bed plates benching ,slab,beams and coloumns etc slightly round or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge

M&L for mild steel bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge

M&L for mild steel bars 5 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge

M&L for precast reinforced cement concrete type B0, 1:2:4 (12.5 mm graded aggregate) in door and windows frames, any size, single or double rebated, including arrangement for fixing of hinges and fixtures as required complete all as specified and directed by Engr-in-Charge

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr-in-Charge

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge

M&L for taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal complete all as sp[ecified and directed.

M&L for taking up or down 25 mm bore steel tubing and connections, including cleaning for Refixing or removal complete all as specified and directed.

S&F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes etc., laid in trenches/fixed on walls. complete all as specified and directed by Engr-in-Charge

S&F 25 mm bore steel water Tubing 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge

M&L for dismantling ceiling boards,fibre pulp insulation etc or insulation boards/slabs/blankets,any thickness, including cover and except MS Grid complete all as specified and directed by Engr-in-Charge

S&F false ceiling with fibre cement designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the desin (occeanic, lake & hill,cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gms, both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross'T' at 600mm c/c to form a grid including, required cutting/making, opening for services like diffusers,grills,light fittings, fixures,smoke detectors etc . Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with gavanised Butterfly level clips, spaced at 600 mm c/c along main T, bottom exposed width of 15 mm of all T- sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, and refixed all exesting electric wiring and fixture all complete at all heights as per direction of Engineer-in -Charge.

S&F in reapirs stainless steel fancy type curtain rods with bracket fixed to wall with suitable screws and onion type end brackets all as per approved design/colour/pattern fixed ,complete all as specified and directed by the Engineer-in-Charge.

M&L for demolition of reinforced cement concrete in ground floors for levelling of and pavings not exceeding 15 cm thickness including floor finish complete all as specified and directed by Engr-in-Charge

M&L for reinforced cement concrete, 1:2:4, type A-1 (using 20 mm graded stone aggregate) as in beams/bends supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, shelves and like complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beam, beam haunching girders, bressum-mers, lintels cantilevers, shelves including supports,overhangs etc also splays between floors and beams, etc complete all as specified and directed.

S&F vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc, fixed in repair, complete all as specified and as directed.

S&F plastic water closet seat cover, closet pattern with flat bottom and cover and incl mild steel chromium plated or aluminum hinges device complete fixed in repairs , all as specified.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm complete all as sp[ecified and directed.

S&F in repair PVC valveless , syphonic action type, Flushing cistern low level, white , with inlet, ball valve, float and handle including brackets,10 ltrs capacityincl suitable pvc flushing bend complete all as sp[ecified and directed.

S&F in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as sp[ecified and directed.

S&F angle cock concealed valve cast cpper alloy fancy type 15 mm complete all as specified and directed by Engr-in-Charge

S&F in repair Bib tap cast copper alloy fancy type suitable for15 mm dia pipes complete all as specified and directed by Engr-in-Charge

S&F in repair Corner glass shelf complete all as specified and directed by Engr-in-Charge

S&F CP towel rail 600 mm complete all as directed complete all as specified and directed by Engr-in-Charge

S&F CP towel ring squre complete all as complete all as specified and directed by Engr-in-Charge

M&L for dismantling water tanks of exceeding 250 & not exceeding 500 ltrs and removing to store, complete all as specified and as directed.

M&L in repairs for 500 ltrs capacity Rotational moulded polyethylene water storage tanks three layered white in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified

S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed in position complete all as specified and directed.

M&L for GI Unions,20mm brass to connect iron to polyethylene and fixed complete all as specified and directed by Engr-in-Charge

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wall nut colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete, all as specified and directed by Engr in Charge.

S&F Factory Made Solid PVC Moulded Door Shutter wall nut colour, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the ront face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing but 2mm thick Moulded Prelam PVC Sheet on the front ace & 2mm Plain colour PVC Sheet on back face ® complete all as specified and directed.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed by Engr-in-Charge

S&F looking mirror of size 450 x 600 using 5 mm thick mirror edges rounded fixed with clips all as specified incuding teak wood/pvc frame of size 25 x 25 mm decorative and water proof including malimine polishing complete all as sp[ecified and directed.

S&F viterous china wash basin,white colour flat back size 550X440 mm incl waste coupling cp 32 mm dia chin and plug and porcelain stopper and CI brackets of iron 65x65x6mm embedded in pcc block with pcc 1:2:4 type B-1 and PVC waste pipe 32 mm dia & CP grating with holes with full pedestal of china ware,including PVC connection 15mm size with PTMT nuts of length 600mm and pillar mixer 'Hot and cold',fancy type,cast copper alloy, with capstan heads,chormium plated,screwed down,high pressure,with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm,fixed in complete all as specified and as directed by Engr-in-Charge.

M&L for taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends swan necks, etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories). complete all as specified and directed by Engr-in-Charge

S&F 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as sp[ecified and directed.

S&F PVC (SWR) bends 75 mm bore any radius with oveal & acces door complete all as sp[ecified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal complete all as sp[ecified and directed.

S&F PVC (SWR) floor trap plain/multi with grating incl. jointing with solvent cement (75 mm bore) complete all as specified and directed.

M&L for taking down carefully the existing Copper/Aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturb surface of walls, floors etc., complete all as specified and directed by Engr -in- charge. Note : (i) Old dismanteled wiring and accessories (other than reuse) will be contractors property and credit will be charged against schedule of credit.

M&L for point wiring with PVC insulated unsheathed, FRLS 1100 volts grade stranded copper conductor cable single core 1.5 Sqmm for one light / fan point controlled by one way switch, and wire to be drawn in and including rigid pvc concealed conduit of dia not less tham 20mmof 2mm wall thickness complete with all accessories including GI anealed metal box 1.2 mm thick switch board of suitable size be fixed flush wall , with 3 mm thick ebonite sheet cover and necessary screws, cap washers etc. or to be fixed on wall respectively as directed by EIC and providing earth continuity wire using PVC insulated, un sheathed single core stranded copper conductor FRLS cable of size 1.5 Sqmm.

All as per item No. 109 above but for one 5 Amps socket outlet on independent board.

All as per item No. 109 above but wire size 2x2.5 Sqmm and and providing earth continuity wire using PVC insulated, unsheathed single core stranded copper conductor FRLS cable of size 2.5 Sqmm. to controlled the 3 pin 5 / 15 Amps socket outlet on independent board.

M&L for point wiring with 1.5 Sq. mm copper conductor, single core, PVC sheathed, cable, to controle one 3 pin socket outlet, 5 Amps on the same board with other switch complete all as specified and directed by Engr-in-Charge

S&F switch Piano, flush type, One way, single pole, 5 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F two in one, 3 Pin, 5 Amps, flush type socket outlet complete all as directed by Engineer- in - Charge.

S&F switch Piano, flush type, One way, single pole, 15 Amps, suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F two in one, 3 Pin, 5/15 Amps, flush type socket outlet suitable for 240 V, 50 Hz, AC supply complete all as directed by Engineer- in - Charge.

S&F ceiling rose, 3 terminal, PVC / polycarbonet, isolated body complete all as directed by Engineer - in - Charge.

S&F Stepped type, electronic fan regulator, flush type on the existing phenolic laminated sheet etc. as required complete all as directed by Engineer- in - Charge.

S&F slim linear LED lighting fixture 18 watt LED batten, with full base of extruded aluminium section acting as a heat sink with closed back, isolated driver, complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings complete including taking down old US tube light fitting 36/40W and taken in schedule of credit all as per the direction of Engr-in-Charge. Make -Make model of Havells cat No LHEXCEP7UN1W020 or equilent to CG/ syska CAT No CAT NO : SSK RA 1801

S&F of decorative ultra slim linear LED lighting fixture 5/6 watt LED complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting drawn through in PVC flexible conduit complete all as per directed by Engr-in-charge Make SYSKA OR equivalent model of wipro and havells.

S&F of decorative ultra slim linear LED lighting fixture 10/12 watt LED complete making all connection using 1.5 sqmm copper conductor multistranded PVC insulated 2 core flexible cable from ceiling rose to fitting by using extra length flexible cable 2 core other than provided by manufacture complete all as per directed by Engr-in-charge.Make : Make SYSKA OR equivalent model of wipro and havells.

S&F new generation energy saving LED bulk head 9/10 Watt with opal diffuser suitable for 600 LUMEN complete. Make SYSKA OR equivalent model of wipro and havells.

S&F bulding security (street) light fitting 35 watt, new generation energy saving & environmental friendly long life versatile pressure die cost aluminium IP 66 with acylic, powder coated, pressure die cast aluminium compact high power LED street light with heat resistant toughed glass, corrosion resistant, isolated driver, including provision of GI tubing bracket of suitable size and fixed on wall including clamps, nut, bolts and washer for fixing of security (street) light completet as per direction of Engr-in-Charge. Make:SYSKA Cat no SSK-ST-25W(S) or equivalent in Havells Cat No : ENDURACITYLITEPLATPLUSSL35WLED757SASYBOPC, Wipro

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as directed by Engr-in-Charge

M&L for taking down fan/Exhaust fan, ceiling cable end, dismantling blades and kept in safe custody for repairing/servising all as specified and directed by Engineer in charge.

M&L for repair of ceiling fan 1200mm sweep/ Exhaust fan of any make obtained from above item, oiling, greasing after cleaning slot, over hauling & replacement of defective split pin nut bolts washer etc including spray painting with enammeled paint with the help of spray gun and marking of MES No with black enammeled paint all as specified and directed by Engr-in-charge.

Hanging /fixing only ceiling/Exhaust fan and connecting up including provision of stranded 3core flexible 1.0sqmm copper conductor cable from ceiling rose or connector to fan all as specified and directed by Engr-in-charge.

M&L for earthing complete with GI earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below Normal ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised earth lead wire 4.0mm dia by means of GI nuts, bolts and washers of galvanised iron or steel all as shown in electrical plate no.5 connecting to earth test point all as specified or indicated including testing on complition with following:- (a) Test point GI wire 4mm dia . (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 25mm thick with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover. (d) Angle iron frame made of 40x40x4 mm angle iron for 30x30 mm PCC pit for holding the pit cover.

S&F in replacement single pole and neutral sheet steel powder coated Distribution board for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed by Engr-in-Charge

S&F 'C' series SPN MCB 40 to 63 Amp Amps 240V ,50Hz,10kA lighting and other domestic loads incl all termnials, fitting etc. complete all as specified and directed by Engr-in-Charge

S&F connection and testing MCB SP 6-32 Amps 'B' Curve complete all as specified and directed by Engr-in-Charge

SupplyIing, laying / fixing and testing in replacement XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 2 core in trenches/floor/pole/GI pipe complete including cutting/chasing to any surface and making good to the disturbed surface to match the existing complete all as specified and directed by Engr-in-Charge

M&L for dry sand cushioning to under ground cables provided with a layer of sand 8 cm deep before laying the cable, 15 cm depth after laying cable & stretching the cable all as specified and directed.

Supply and lay brick class ‘B’ covering as mechanical protection to cable with well burnt complete all as specified and directed by Engr-in-Charge

M&L for GI tubing light grade with all fitting and fixed in wall and floor or fixed to pole of size 40mm dia. complete all as specified and directed by Engr-in-Charge

SHIVAE CONSTRUCTION

JOGINDER SINGH

KALSOTRA CONSTRUCTION CO