WBPWD/KSHD/EE-I/NIQ-11 OF 2019-2020

Amount

Supply & Placement of Almirah will be from ISO 9001 :2015, ISO 14001, OHSAS 18000, BIFMA Certified Multi bend construction fastener free. Knock down construction. Slim and sleek body with a handle enhanced by a snap shut mechanism. Two tone finish. Elegant skirting cover to cover legs & also provides an additional space for storage. Leveling screw below the legs provides sturdy stand even on uneven surface. DIMENSION OUTER - 1950 x 900 x 507 mm a) Top, bottom, LH & RH sides, Door and back material thickness= 0.8 / 0.6mm b) Door with 10-lever cam lock plastic handle with plastic base. c) 4 Nos shelf of material thickness = 0.6 mm. NET WEIGHT (W/O CARTON) = 67.59 Kg. GROSS WEIGHT (WITH CARTON)= 72 Kg.a. Locks: 10 lever cam lock. b. PU plastic handle used c. Double d shape shooting bolt (blue zinc electro plated) d. 4 Nos. leveling screws e. Pop rivets f. 2 hanging rods half or 1 hanging rod full. g. Cartons: 5 ply carton box used with bursting strength of 18 kglcm2. Slimline 2 Door Wardrobe with Locker For Main Cabin

Supplying and placement of Bed Side Locker from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA Certified Manufacturers and as per approved drawing & design / specification of Engineer-in-charge. Deluxe locker has one cabinet and one drawer unit. There 1s a gap in between the drawer unit and the cabinet to keep the general items for frequent use. castors are proivded for easy handling. Dimension 402x442x840. Drawer CRCA with ball slide. MS slide with Zinc Plated Balls. Cabinet door is proivded with locks and ventilation holes. Top is made of SS 304 0.8 mm thick sheet. ABS made recess handle to provide the doors. Powder coating made of Epoxy Polyester. Deluxe Bed Side Table For Main Cabin

Supplying and placement of curtain and channel as per approved drawing & design / secification of Engineer-in. charge. Aluminium Extrusion powder coated white baked on tough smooth surface, no paint chipping and pre lubricated. 12' radius corner bends. No lubrication needed and no dust end. A dry lubricant to minimize the drag. All carriers are UV resistant plastic. All carrires come with SS Hook. Brackets are made up with steel and white powder coated finish at the track. Curtain with Channel For Main Cabin

Supply & placement of Side table from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA Certified Manufacturers and as per approved drawing & design /secification Dimension (mm) a 600, b 600, c 540, f 10 (T) FRAME MATERIALS & SIZE: TABLE LEGS METERIALS & SIZE: MDF WITH PVC COVERING L x W x T 150 x 65 MM Color: BLACK TABLE TOP MATERIALS & SIZE : (DENSITY / TYPE) L x W x T 600 X 600 X 10 MM Color: PARITAL BLACK PRINTED GLASS PACKING SPECS : Table leg carton size: 200x120x580 MM Qty: -- pieces per carton (1 of 1) 5ply - _gsm Top carton size 640x640x40 MM Qty : -- pieces per carton (1 of 1) 5ply -_ gsm, FINISHING: PARTIAL BLACK GLASS WITH BLACK PVC COVERING. Crystalline Centre Table For Cabin

Supplying and placement of Bed Side Locker from ISO 9001 :2015, ISO 14001, OHSAS 18000, BIFMA Certified Manufacturers and as per approved drawing & design/ secification of Engineer-in-charge. Simple Locker is one cabinet with SS Top. rest structure is in MS powder coated. Dim 402x404x835. Structure ERQ Square tube with thickness 1.6 mm. Top is SS 304 Sheet of thickness 0.8 mm. Cabinet Door is provided with ventilation & locks with 1.0 mm. ABS made recess handle. Powder coating made of Epoxy Polyester. Standard Bed Side Table For Cabin

Table : Supply and placement of Table dimension of 1200x600x750 , ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA Certified .Worksurface The panels are made from 18+-0.5 mm thick Pre Laminated boards as per with 2mm thick PVC edge banding on all sides.C frame made from 0.9 +-0.09 mm thick powder coated 50 microns(+-10) CRCA MS.Made from 1.0+-0.09 mm thick powder coated 50 microns(+-10) CRCA MS.Shell 0.5 +-0.07 mm thick CRCA MS.Drawer Tray :0.5 +-0.07 mm,Drawer Front : 0.8 +-0.1 mm thk CRCA MS.Lock: 10 Lever Cam Lock.Handle Built in Plastic.

Chair : Supply and placement of ISO 9001:2008,BIFMA,OHSAS 18000,ISO 14001 Greenguard certified Mid Back Chair. The seat and back shall be made from 1.2 ±0.1cm thk. hot pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam shall be designed with contoured lumbar support for extra comfort. The dimensions of seat shall be 45.0cm(W) x 42.0cm.(D) and of back shall be 40.0cm(W) x 47.0cm.(H). The seat and back covers shall be injection moulded in black Co-polymer Polypropylene. The HR polyurethane foam shall be moulded with density.=45±2.kg/m3 and hardness load 16±2 kgf as per IS:7888.for 25% compression. The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5 ± 0.05 em. thk. HR steel. The permanent contact mechanism shall be designed with 360° revolving type, 14±2°maximum back tilt only, Upright position locking, Tilt tension adjustment. The pneumatic height adjustment shall has an adjustment stroke of 11.0 ±0.3cm. The bellow shall be 3 piece telescopic type and injection moulded in black Polypropylene. The pedestal shall be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal shall be 62.0 ±0.5cm. pitch-centre dia. (72.0 ±1.0cm with castors). The twin wheel castors shall be injection moulded in Black Nylon. Overall Dimensions of Chair shall be Seat Height - min 43.0 to max 54.0cm, Height - min87.5 to max 98.5cm, Width & Depth of Chair as measured from pedestal - Width-71.0 cm and Depth-71.0 cm.

Chair : Supplying & installation of Chair from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA,AIOTA,Greenguard Certified Manufacturers and as per approved drawing & design/secification of Engineer-in-charge. .The seat and back shall be made from 1.0±0.1cm. thk. hot pressed moisture resistant, commercial plywood measured as per QA method described in OCP-QLTA-P14-18 and shall be upholstered with P.U. foam and fabric. The dimensions of Back shall be 42.0cm. (W) X 26.5cm. (H) and of seat shall be 42.0cm (W) X 42.0cm (D). The HR Polyurethane foam shall be moulded with density =45+/-2 .kg/m3 and Hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. The understructure assembly shall be a cantilever type mainframe made of dia 2.54 ±0.03cm. x 0.2 ±0.016cm.thk.M.S. E.R.W. tube and black powder coated ( DFT 40-60 microns ). The armrests shall be made in twin tube form using dia 1.58cm. (5/8") x 0.16 ±0.0128cm.thk. M.S. E.R.W. tube and black powder coated (DFT 40-60 microns). Overall Dimensions of Chair shall be Seat Height - 46.0 cm, Height - 82.5cm, Width & Depth of Chair as measured from pedestal shall be Width-54.0cm and Depth-59.5 cm.

Table : Supply and placement of ISO 9001:2008,BIFMA,OHSAS 18000,ISO 14001 Greenguard certified Table Providing and supplying and placing in position study table of Dimension: 900mm X 600mm X 750mm. The worksurface should be made of 18mm thk. PreLaminated Board (PLB)= 25mm Thick PreLaminated Board – PLB.All work surface edges are duly sealed with 2mm thick PVC beading. The C frame understructure sould be CRCA MS sheet 0.9 mm Thick. The tubular frame should be made of MS ERW Square Tubes : 25.4mm x25.4mm x 1.2mm Thick. The manufacturer should be having certifications like; BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007 and should have Green Guard Certification for few of its products.

Unwind Chair with ARM : Supply & placement of Unwind chair with ARM , ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA & GREENGUARD Certified Manufacturers and as per approved drawing & design / secification Dimension of the chair 525 x 558 x 845.The seat and back are made up of injection moulded high impact strength polypropelene polymer compound with indoor grade UV resistance.Seat size 525x532 and back size 516x405.The powder coated welded tubular frame is made from 2.22+-0.03 x 0.16+-0.0128 and 3.5+-0.03 x 1.5 +-0.03x0.16 +-0.0128 cm MS ERW tube with SS 202 grade tube.The tubes are buff polished to give shiny finish.The npowder coated welded beam MS structure is made from 5.08 +-0.03 x 0.16 x 0.0128.The HR Steel plate is welded to beam for fixing seat and back frame.The powder coated welded leg MS structure is made from 5.08+-0.03x5.08+-0.03 x0.16x0.0128.The shoe are made of high impact strength Polypropelene Polymer compund with indoor grade UV resistance and pressed fitted with tubular frame.Armrest are made of high impact strength Polypropelene polymer compund with indoor grade UV resistance and assembled over the tubular frame.

Café Pod with Rubberwood : Supply & placement of Unwind chair with ARM , ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA & GREENGUARD Certified Manufacturers and as per approved drawing & design. Café Pod with Rubberwood Size : 800mmW x 800mmD x 738mmH.

Sofa cum Bed : Supplying Sofa cum Bed Size: 1990mm x 900mm made of 100mm x 25mm Mahagony season wood section with BWR 6mm ply. Fixing of wood section padding with 50mm high density coir mattress. Fixing with back seat portion another portion of sofa cum bed 75mm/40mm density foam padding with seat and back portion. Another part of good quality colour leatherette upholstery 4 nos decorative wooden legs finish with good quality Gala spirit polish as per approved design.

Supplying and placement of Sofa 3 Seater. from ISO 9001:2015, ISO 14001, OHSAS 18000, BIFMA Certified Manufacturers and as per approved drawing & design / secification of Engineer-in-charge. . NYLON, POLYSTER-COATS 3-4 FRAME MATERIAL: LEATHER/PVC/FABRIC: LEG MATERIAL: BELT MATERIAL: SEAT FOAM: (DENSITY, TYPE) 28 D - POLYURETHANE SLAB STOCK FOAM WITH 1" RECRON LAYER BACK FOAM: (DENSITY, TYPE) 28 D - POLYURETHANE SLAB STOCK FOAM WITH 1" RECRON LAYERa Total Length 2060(I) b Total Width 950 c Total Height 800 d Seating Area Width 520, e Seating Area Length 480f Seating Area Height from Ground 370g Arm Height 250h Arm Length 410 i Back Height from Arm 180j Back Width 350 k arm Width 290l Leg Height 35 m Length between Legs 645 n Width between Legs 520THREAD PITCH-mm PLY GSM Wooden Fascia is of MDF with Melamine coating Packing: 7 ply carton packing Leg Dia: Dia=55 mm, Height= 35 mm STITCHING: NYLON, 2", 3" ,7 PLY CORRUGATED 180 GSM WITH - 24 BF, BOLTIC GLUE MDF WOODEN FASCIA WITH MELAMINE COATING TROPICAL SEASONED HARD WOOD, PARTICLE BOARD PU (SYNTHETIC LEATHER.)

Supplying and placement of Refrigerator 190 ltr. Samsung -RR20M272ZD2.

Godrej And Boyce Mfg.Co.Ltd.

WELL DECOR