PROVN OF PAVERED PATHWAY ALONGWITH PROVISION OF LADIES AND GENTS TOILET, RCC SHED AND NECESSARY BOUNARY WALL AT VIJAY DURG AND ADDN / ALTN OF BLDG NO P-21 AND CERTAIN MISC WORKS UNDER GE (FW) KOLKATA

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for laying pipes etc or for manhole shaft n exc 10 sqm on plan and n exc 1.5m in depth and getting out Soft and loose soil all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n exc. 1.5 m above the starting point in any type of soil all as specified and directed.

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation (using 40 mm graded granite stone aggregate) in foundation etc complete all as specified and directed.

M&L for RCC type B-1 1:2:4 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams etc basement slabs, under rammed piles and mass concrete all as specified and directed.

M&L for RCC type B-1 1:2:4 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roof , landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed

M&L for RCC type B-1 1:2:4 (20mm graded aggregate) in Beams, cantilevers, bresummers, lintels over 1.5m span all as specified and directed

M&L for RCC type B-1 1:2:4 (20mm graded aggregate) in chajjas all as specified and directed.

M&L for RCC type B-1 1:2:4 (20mm graded aggregate) in column, pillars, piers, posts and struts all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; roof beam and similar work; vertical or to batter all as specified .

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces complete all as specified and directed

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for TMT bars but 5mm dia and over up to and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

S&F for 4 mm thick of Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane all as specified and directed.

M&L for brickwork with fly-ash bricks (with old size bricks), straight or curved on plan exc 6m mean rate any radius built in cement mortar 1:6 complete all as specified and directed

Material and labour for rendering 15mm thick in CM 1:6 internal fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete wall surfaces in CM 1:4 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on fair faces of brick work or concrete ceiling surfaces in CM 1:3 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed

S&F for liquid water proofing compound complete all as specified and directed

S&F for anodised aluminium powder Coating minimum thickness of powder coating 50 micron to frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for providing on new plaster surfaces of walls applying two coats of distemper oil emulsion over one coat of primer all as specified and directed.

M&L for providing on new plaster surfaces of ceilings applying three coats of white wash all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Complete all as specified and directed

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing all as specified and directed.

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelim PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed.

S&F butt hinges, medium weight, cold rolled mild steel, 100mm complete all specified.

S&F 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all specified.

S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all specified.

S&F for 150mm aluminium handles, cast type, anodised complete all specified.

M&L for hardcore broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L for 75mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate in plinth protections complete all as specified and directed.

M&L for 100mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) in floors complete all as specified and directed.

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over laid screed bed 20 mm thick CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/600x450x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and over laid backing coat 10mm thick plaster CM 1:4 complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for rendering 20mm thick screed bed on fair faces of roof surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed

M&L for 25mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub bases of floors complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application and over applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre complete all as specified

S&F for 110mm dia PVC (SWR) soil pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F 110 mm bore PVC bends etc complete including necessary scaffolding to any height of building all as specified and directed.

S&F in cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead complete all as specified and directed.

S&F for Salt-glazed stoneware gully traps Size 150x 150mm , square or round mouthed, type s type including all items all as specified and directed

S&F for 100 mm dia Cast iron sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors etc complete all as specified and directed.

S & F for CI bend / Tee 100 mm bore etc complete including necessary scaffolding up to any height of building all as specified and directed.

Material and labour for reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab for manholes set in CM 1:4 including necessary form work all as specified and directed.

S&F for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate in forming channel, benching inside manhole (1/2 or 3/4 section ) in manhole and as coping including form work all as specified and directed.

S&F for 15mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F for 20mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F for 25mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F for 1000ltr capacity rotational moulded polyethylene water storage tanks (cuboid with closed top) hoisted and fixed in position all as specified in SSR Part l complete all as specified and directed.

S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F for 15mm stop/ angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F for 25mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed

S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F for table top wash basin Size 470x345x150 mm with pop up drainer complete all as specified and directed. Make: cero Cat No. A2020116, or equivalent make specified in tender.

S&F for Pillar cock including all fittings complete all as specified and directed. Make : Cera Cat no : G1017101, or equivalent make specified in tender.

S&F for two way angle cock including all fittings all as specified and directed. Make : Cera Cat no : G1017211 or equivalent make specified in tender.

S&F for Angle cock with wall flange including all fittings all as specified and directed. Make :Cera Cat no : G1018201, or equivalent make specified in tender.

S&F for EWCs with seat cover including all fittings all a specified and directed . Make :Cera Cat No: S1013206, or equivalent make specified in tender.

S&F for Health faucet ABS body with 1 meter SS Braided connection pipe including all fittings all as specified and directed. Make : Cera Cat No: F8030109AB ,or equivalent make specified in tender.

S&F for Towel ring including all fitting all as specified and directed. Make : CERA Cat No. F5013115 CH, or equivalent make specified in tender.

S&F for Paper Holder with flap guard including all fittings all as specified and directed. Make :Cera Cat No: F5013110 CH ,or equivalent make specified in tender.

S&F for Soap dish including all fittings all as specified and directed. Make : Cera Cat No: F5013106 CH, or equivalent make specified in tender.

S&F for Towel rack (24'') shelf including all fittings all as specified and directed. Make :Cera Cat No: F5013121 or equivalent make specified in tender.

S&F for Bottle trap 300 mm including all fittings all as specified and directed. Make Cera Cat No: F8060406, or equivalent make specified in tender.

S&F for urinal size 375x 390x590mm snow white colour including all fittings all as specified .Make : Cera Cat No: S4020112, or equivalent make specified in tender.

S&F for Urinal division plate including fittings all as specified and directed. Make : Cera Cat No: S 4090101, or equivalent make specified in tender.

S&F for Urinal spreader including all fitting all as specified and directed. Make: Cera Cat No: F8070201 ,or equivalent make specified in tender.

S&F for Mirror size 700x500 mm , 5mm thick glass mirror double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection . Make : Cera Cat No. B 3510106,,or equivalent make specified in tender.

M&L for mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Brickwork with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 etc all as spd and as directed.

M&L for PCC type C-2 (1:3:6) using 40 mm graded stone aggregate as in sub base of flooring etc complete all as spd and as directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed

M&L for 100mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate in floors finishing cement concrete surface even and smooth using extra cement complete all as specified and directed.

M&L for 100 mm thick PCC 1:3:6 type C-2 40mm graded aggregate finished complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L (White/ any type of colour) marble work, makrana white, 18 to 20 mm thick (antiskid/ rough finish) in steps, jambs, pillars , window cill, Cooking plat form and floor etc, set and jointed in neat cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre-cast concrete articles all as directed.

Dismantling structural steel work including doors, gate but excluding framed trusses etc all as specified and directed.

Material & Labour for providing and fixing stainless steel Gate / (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate in forming channel, benching inside drain (1/2 or 3/4 section ) in drain and as coping including form work all as specified and directed.

Material and labour for rendering 10mm thick in CM 1:4 mixed with WP compound on external fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured separately.

Extra for forming fair finished channel or drain of 30 cm inner girth in cement concrete using extra cement including forms, moulds mitred stopped ends etc

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

M&L for 150mm internal dia salt glazed stone ware drain pipes laid in tranches and jointed as specified in SSR Part 1 etc complete all as specified and directed

M&L concrete bed to drain pipe including packing under and haunching against the side of drain pipe after laid and tested in PCC 1:3:6 type C2 for 150 mm bore pipes complete all as specified and directed.

Soakage wells 1.8 m dia x 3.00 m depth of excavation, in type of soil, foundation in PCC 1:3:6 walls of honey combed masonry with top ring of M 25 concrete including intercepting chamber and screen chamber made of brick masonry in CM , RCC Cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size

M&L for elevation / Flat coloured Ceramic exterior wall tiles (in natural stone shade /brick shade ) of size 600x300x10-12 mm thick in vertical surfaces, set and jointed in polymer modified cementations adhesive (sika cream - tilofix) 15mm thick as backing layer and pointed in white and black coloured cement for top surface grout to match the tiles shade complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed

M&L for Dark shade/ Double charged/ Ultra charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over laid screed bed 20 mm thick CM 1:6 complete all as specified and directed.

M&L for 10mm thick toughened glass as in hinged door, partitions automatic doors and other works etc including cutting to shape drilling holes required and all fittings like handle , locking system , floor spring all as specified and directed.

S&F in repair EWC with Vibe sense ,size 655x355x730mm ,snow white colour (Battery/ Electrical operated system) p or s trap with slim soft close seat cover including all fittings all as specified and directed . (MAKE : CERA , Cat No : S1013228 VS / PARRYWARE/ KOHLAR, or equivalent make specified in tender.

Supply and fix vitreous china wash basin, Super special colour , Oval type , size 560 x 400x205 mm Oval shape excluding taps, waste, chain and plug and porcelain stopper complete all as specified and directed .(Make : CERA Cat No. S2030103 ,or equivalent make specified in tender.

S&F in repair 15mm CP bib taps, cast copper alloy fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F for Deck mounted Sensor Pillar taps (AC/DC Operated system) including all fittings all as specified and directed. (Make : CERA Cat No. F 6010109 or equivalent make specified in tender.

S&F in repair Glass shelf including all fittings all as specified and directed. Make : Cera Cat No. F 5001114,or equivalent make specified in tender.

S&F in repair Corner Glass Shelf (medium ) , size 225x225mm including all fittings all as specified and directed. Make : Cera Cat No. F 5005102or equivalent make specified in tender.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal .

S&F for 15mm dia bore tubes, 'medium grade' galvanised, with all fitting and fixed complete concealed to walls and ceilings or laid in floors complete all as specified and directed.

S&F for 12-24 mm thick CNC PVC Jali plain colour or any type of Colour including all fittings all as specified and directed.

S&F for Steel work in tubular trusses, Pipes etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and directed.

S&F for Joist, channel, angle, or tee sections, fixed independently without connecting plates etc all as specified and directed.

M&L for new steel and iron surfaces apply two coats of synthetic enamel paint over one coat of red oxide of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.

S&F in repairs for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs for Towel ring including all fitting all as specified and directed. Make : CERA Cat No. F5013115 CH, or equivalent make specified in tender.

S&F in repairs for Soap dish including all fittings all as specified and directed. Make : Cera Cat No: F5013106 CH, or equivalent make specified in tender.

S&F in repairs for Towel rack (24'') shelf including all fittings all as specified and directed. Make :Cera Cat No: F5013121 or equivalent make specified in tender.

S&F in repairs for Bottle trap 300 mm including all fittings all as specified and directed. Make Cera Cat No: F8060406, or equivalent make specified in tender.

S&F in repairs Urinals with integrated EFS size 375x 330x780mm snow white colour (Battery/ manual operated system) including all fittings all as specified . Make : Cera Cat No: S4010101/ Parryware/ Kohlar, or equivalent make specified in tender.

S&F for table top wash basin Size 470x345x150 mm with pop up drainer complete all as specified and directed. Make: Cera Cat No. A2020116/ Parryware/ Kohlar, or equivalent make specified in tender.

S&F in repairs for Mirror size 700x500 mm , 5mm thick glass mirror double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection . Make : Cera Cat No. B 3510106,,or equivalent make specified in tender.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

GAYATRI ENTERPRISE (BID ID -3373397)

A S ENTERPRISE (BID ID -3373694)

NICE INFOTECH (BID ID -3369698)

RST ENTERPRISE (BID ID -3373321)

M/S AVIJEET INTERNATIONAL (BID ID -3371020)

M. M. C. AND CO (BID ID -3374743)

Tirupati Buildcon Pvt. Ltd. (BID ID -3373851)