Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹10.0 LAccepted-Finance | 1 | Accepted-Finance Technical and financial bid are in order. | |
| 2 | 2₹11.9 L+₹1.9 L (19.3%)Accepted-Finance | 2 | Accepted-Finance Technical and financial bid are in order. |
Tender Value
₹14.1 L
EMD Value
₹28,143
Closing Date
14 Mar 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, NACD, APWD, Mayabunder
EE, NACD, APWD, Mayabunder
A/R M/O Residential buildings under Sub Division No.I, NACD, APWD, Mayabunder during 2022-23. SW- Re-roofing of 04 Nos. GPA Ty-II Qtrs namely Ty-II LS-05/06/07/08 including ceiling works and other minor repairs at GPA colony, Lucknow.
2023_APWD_9481_1
NIT NO.101/2022-23/EE/NACD
Open Tender
Civil Works - Buildings
Works
90 days
EE, NACD, APWD, Mayabunder
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹28,143
15 Mar 2023
23 Feb 2023
15 Mar 2023
23 Feb 2023
14 Mar 2023
23 Feb 2023
Amount
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
110 mm diameter
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Bend 87.5° I) 110 mm bend
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
12 mm cement plaster of mix :
1:4 (1 cement: 4 fine sand)
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :
Of sectional area 40 square centimetres and above
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
Asbestos Cement sheet
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work
25 mm dia nominal bore
40 mm dia nominal bore
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
25 to 40 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
25 mm nominal bore
40 mm nominal bore
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.
25 mm nominal bore, 152mm long, weighing not less than 440 gms
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in- charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately).
Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge.
Supplying and applying bituminous solution primer on roof and / or wall surface at 0.24 litre per sqm.
Providing and fixing pre-painted galvalume (PPGL) steel profile sheets AZ-150 of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd. or equalavent (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with aluminium zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping aluminium screws (Xylan) of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing pre-painted galvalume (PPGL) steel profile sheets accessories 0.50 mm (+0.05 %) total coated thickness, with aluminium Zinc coating 150 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : of brand Tata Bluescope steel, Everest Industries Ltd., JSW Steel Ltd., Jindal India Ltd.
Ridges plain (500 - 600mm)
Valley of 90cm width
Dismantling of eaves or facia board (WPC/Timber) along with its nut bolts for eaves height upto 10 metres including stacking the material within 50 metres lead.
Providing and fixing eaves or facia baord with 19mm thick WPC board 30 cm wide including fixing with GI nut and bolts etc. complete.
Extra for providing and fixing wind ties of 40x6mm flat aluminium section with necessary screws etc.
Grading roof for water proofing treatment with a) Cement concrete 1:2:4 (1 cement : 2 river sand : 4 graded stone aggregate 20mm nominal size)
Removing enamel paint, aluminium paint along with irregularities on the surface by scrapping, sand papering and preparing the surface smooth complete in the handraillings or grill works.
Providing and fixing plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).
Decorative Type - 6 mm thick Cement fiber board as per IS: 14862
Construction of 5.80m ht Steel Staging with double Platforms each of Size 3.00X1.60m whole unit provided with 06Nos of RCC Short Column base (300mm x 300mm size) with foundation footing for each and foundation depth of 1.20 Mtr with short column raised to 150mm above G.L and erecting Pre- fabricated staging over the short column base by means of base bearing plates & Foundation bolts. etc complete., Including Pre-Fabrication of 01 nos of Steel Staging with double platforms each of size 3.00m Length & 1.60m width & each platform welded over with 20Gauge thick GI Sheet and staging frame consisting of 06nos of 65dia GI Pipes in vertical posts and 50mm dia GI Pipes in horizontal tie members & 40mm dia GI Pipes in cross bracings provided as required in all of its four sides & 50dia GI Pipe in outer frame of each top platforms with 32mm dia GI pipes in its intermediate spaced @ 150c/c , complete unit made out of GI pipes and painted with black anti corrosive bitumastic paint of all complete as per enclosed detailed drawing sketch & direction of EIC.
Providing and Fixing steel Ladder of overall length 6.00mtr & 0.50mtr width (outer to outer) consisting of 50dia GI Pipes as the vertical rail members & 32mm dia GI pipes as the intermediate rungs spaced @ 300c/c i/c fixing the same to the steel staging in a required position and painted with black anti corrosive bitumastic paint of all complete as per enclosed detailed drawing sketch & direction of EIC.
Providing and fixing unplastisized G.I. pipe clips of approved design to unplastiside sized PVC sanitary waste pipes by means of 50x50x50mm hard wood plugs screwed with MS screws of required length including cutting brick work and fixing with a cement mortar 1:4 and making good the wall etc complete. (a) 110 mm dia pipe.
Providing and laying hollow block cement concrete block walling 100mm thick consisting of hollow block of size 400mm x 100mm x 200mm of mix 1:3:6 (1 cement; 3 coarse sand; 6 graded stone aggregate 10mm nominal size) having a crushing strength of 3.5N/Sqm at 20 days as per IS:2185 (Part-I) 1979 laid in cement mortar 1:6 (1 cement; 6 coarse sand) upto floor five level.
S B SHARMA
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .