Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.2 LAccepted-AOC CITI COMPLEX KALAPAHAR GUWAHATI 781016 ASSAM | GUWAHATI | KAMRUP METRO | ASSAM | 781016 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹45.2 L+₹77,646 (1.75%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹47.4 L+₹2.9 L (6.63%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹47.4 L+₹3.0 L (6.71%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | Rejected-Technical | - | Rejected-Technical NOT ELIGIBLE |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS PIN-913869 C/o 99 APO
REPAIR/REPAINTING OF STEEL FURNITURE ,RE-CANNING, POLISHING OF WOODEN FUNRITURE AT UNIT LINES, MARRIED ACCN AND FUNRITURE UNDER GE 869 EWS AT LEIMAKHONG MIL STN.
2023_MES_605818_1
8512/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹90,000
Yes
20 Nov 2023
26 Jun 2023
29 Jul 2023
26 Jun 2023
28 Jul 2023
14 Jul 2023
Amount
Schedule 'A'
Removing the existing unserviceable tops from the following tables and supply and fix new top of 18/19 mm thick commercial block board with 1 mm thick plastic laminated sheet fixed on top 4 mm thick teak wood edging shall be provided al-round the top.all as shown on drawing and specified . (1.01) Table 3'x 2' with drawers steel/Wdn FD-1008 & FD-283
(1.02) Table 3'x 2' without drawers steel/Wdn FD-1007 & FD-224
(1.03) Table Centre FD-235
(1.04) Table peg FD-227
(1.05) Teapoy FD - 278
(1.06) Table dining 6 Persons FD - 239 & FD/MAP/03
(1.07) Table dining 8 Persons FD-273
(1.08) Table Writing FD-275
(1.09) Table Office clerk steel FD-1004
(1.10) Table office Officer steel FD-1003
(1.11) Teapoy Verandah FD-255
(1.12) Table 900 mm x 600 mm with drawer steel FD-1008
(1.13) Table 900 mm x 600 mm without drawer steel FD-1007
(1.14) Table 900 mm x 900 mm steel FD-1009
Removing the existing unserviceable front and back long rail from the following tables and supply and fix new front and back long rail of teak wood/Hollock/Bonsum size, shape & design as shown on drg All new surfaces shall be two coat of french polish with high gloss finish. (15.01) Table 3'x 2' with drawers FD-283
(15.02) Table 3'x 2' without drawers FD-224
(15.02) Table Centre FD-235
(15.03) Table peg FD-277
(15.04) Teapoy FD-278
(15.05) Table dining 6 Persons FD-239
(15.06) Table dining 8 Persons FD-273
(15.07) Table Writing FD-275
Ditto all as per item No 15.00 here-in- above but short side rail. (23.01) Table 3'x 2' with drawers FD-283
(23.02) Table 3'x 2' without drawers FD-224
(23.03) Table Centre FD-235
(23.04) Table peg FD-277
(23.05) Teapoy FD FD-278
(23.06) Table dining 6 Persons FD-239
(23.07) Table dining 8 Persons FD-273
(23.08) Table Writing FD FD-275
Ditto all as per item No 15.00 here-in- above but Legs. (31.01) Table 3'x 2' with drawers FD-283
(31.02) Table 3'x 2' without drawers FD-224
(31.03) Table Centre FD-235
(31.03) Table peg FD-277
(31.04) Teapoy FD FD-278
(31.05) Table dining 6 Persons FD-239
(31.06) Table dining 8 Persons FD-273
(31.07) Table Writing FD FD-275
Removing the existing unserviceable front leg from following chair and S&F new teak wood front leg complete all as directed and shown on drg Chair dining FD FD-279
All as per Ser No 39.00 but Chair dining MAP FD/MAP-II/05
All as per Ser No 39.00 but Chair Dining Officers (MAP) FD/MAP-II/04
All as per Ser No 39.00 but Chair dining long Back FD-357
All as per Ser No 39.00 but Chair Writing FD-280
All as per Ser No 39.00 but Chair Easy FD-229
Removing the existing unserviceable rear leg from following chair and S&F new teak wood rear leg complete all as directed and shown on drg Chair dining FD-279
All as per Ser No 45.00 but Chair dining MAP FD/MAP-II/05
All as per Ser No 45.00 but Chair Dining Officers (MAP) FD/MAP-II/04
All as per Ser No 45.00 but Chair dining long Back FD-357
All as per Ser No 45.00 but Chair Writing FD-280
All as per Ser No 45.00 but Chair Easy FD-229
Removing the existing unserviceable front rails from following chair and S&F new teak wood front rails complete all as directed and shown on drg Chair dining FD-279
All as per Ser No 51.00 but Chair dining MAP FD/MAP-II/05
All as per Ser No 51.00 but Chair Dining Officers (MAP) FD/MAP-II/04
All as per Ser No 51.00 but Chair dining long Back FD-357
All as per Ser No 51.00 but Chair Writing FD FD-280
All as per Ser No 51.00 but Chair Easy FD FD-229
Removing the existing unserviceable side rails from following chair and S&F new teak wood side rails complete all as directed and shown on drg Chair dining FD-279
All as per Ser No 57.00 but Chair dining MAP FD/MAP-II/05
All as per Ser No 57.00 but Chair Dining Officers (MAP) FD/MAP-II/04
All as per Ser No 57.00 but Chair dining long Back FD-357
All as per Ser No 57.00 but Chair Writing FD-280
All as per Ser No 57.00 but Chair Easy FD-229
SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing the existing unserviceable cushion and replacing with new 100mm thick cushion of 'cool' foam of 32 density 530 mm x500 mm covered with best quality of tapestry cloth Make - Sleepwell/Kurlon all as shown on drgs and as approved by GE. Note :- Each cushion for seat or back will be measured as single unit and tapestry cloth should not be less than Rs.350/Mtr
SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing the existing unserviceable leg from Sofa and S & F new teak wood/Hollock/Bonsum leg all as shown on drg and directed by Engr- in -Charge.
SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing existing unserviceable Arm rest from Sofa and S & F new teak wood/Hollock/Bonsum Arm Rest all as shown on drawing and specified .
SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing existing unserviceable side rail from Sofa and S & F new teak wood/Hollock/Bonsum side rail all as shown on drawing and specified .
SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing existing unserviceable bearer from Sofa long pieces and S & F new teak wood/Hollock/Bonsum bearer all as shown on drawing and specified .
SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing existing unserviceable bearer from Sofa single pieces and S & F new teak wood/Hollock/Bonsum bearer all as shown on drawing and specified .
SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing existing unserviceable battens from Sofa and S & F new teak wood/Hollock/Bonsum battens all as shown on drawing and specified .
SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing existing unserviceable front rail from Sofa long pieces and S & F new teak wood/Hollock/Bonsum front rail all as shown on drawing and specified .
SOFA SET 05 SEATER (3+1+1) FD-281 & FD/E6/MAP-II/02 Removing existing unserviceable front rail from Sofa single pieces and S & F new teak wood/Hollock/Bonsum front rail all as shown on drawing and specified .
TABLE DRESSING WITH MIRROR GENTS. FD-230 Removing the existing unserviceable mirror and S & F new mirror 5 mm thick make modiguard /swastic/saint gobain with back and frame all as specified and shown on drgs including with teak wood support approved quality and shown on drags including with teak wood support.`
TABLE DRESSING WITH MIRROR LADIES FD-251 Removing the existing broken glass shutters and S&F new Glass shutters all as shown on drg (Each glass shutter shall be measured as single unit)
TABLE DRESSING WITH MIRROR LADIES FD-251 Removing the existing unserviceable Aluminium channel and S & F new Aluminium Channel all as shown on drgs
TABLE DRESSING WITH MIRROR LADIES FD-251 Removing existing unserviceable plywood portion of back of Mirror and S&F new back made out of 6 mm thick plywood for mirror all as shown on drgs
TABLE DRESSING WITH MIRROR LADIES FD-251 Removing the existing unserviceable mirror and S&F new mirror 5 mm thick of make modiguard/Saint Gobain with complete frame and back all as shown on drgs .
TABLE DRESSING WITH MIRROR LADIES FD-251 Removing the existing unserviceable 12mm ply wood from back and S&F new back of table dressing ladies made out of 12 mm thick plywood commercial quality all as shown on drgs and specified.
Preparing the wood surface by scraping and filling bore holes with putty and rubbing by sand paper/Abbrassive cloth throughly smooth and clean off and applying one coat of french polish of the required finishing :- (78.01) Table 900x600 with Drawer FD-283
(78.02) Table Dressing Gents FD-230
(78.03) Table Dressing Ladies FD-251
(78.04) Bed plywood top FD-246
(78.05) Chair dining FD-279
(78.06) Chair dining Map FD/MAP-II/05
(78.07) Chair Easy FD FD-229
(78.08) Chair writing FD-280
(78.09) Peg table FD-277
(78.10) Sofa Set 5 Seater FD-281
(78.11) Sofa Set 5 Seater FD/E6/MAP-II/02
(78.12) Stool Dressing FD-252
(78.13) Table 900x600 W/O Drawer FD-224
(78.14) Table Centre FD-235
(78.15) Table dining 6 persons FD-239
(78.16) Table dining 8 persons FD-273
(78.17) Table office clk wooden DB-4100
(78.18) Table office officer wooden WDF-34
(78.19) Table writing FD-275
(78.20) Teapoy FD-278
Removing the existing unserviceable cane from Chairs and recanning of chairs of all sorts i.e. chair dining, chair writing, chair easy, chair CBA wooden with arms, chair Bin soiled Linen large/small and Stool dressing etc, with best quality of plastic cane Make -Maharashtra/ Swastik Industries of approved make. The plastic cane should be 1.80mm x 0.46 mm for weaving and 3 x 0.60 mm for beading as per Godrej pattern as specified and directed by Engr-in-charge (98.01) Chair Dining FD-279
(98.02) Chair writing FD-280
(98.03) Chair easy FD-229
(98.04) Stool Dressing FD-252
LOCKER STEEL FD-1029 M&L for cleaning/preparing the existing surfaces ie. de-rusting, filling putty, denting of lockers steel including inner and outer surfaces and applying two coats of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish all as directed.
LOCKER STEEL FD-1029 Removing the existing unserviceable/damage/ broken legs for lockers steel and S&F with a new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and all as specified and shown on drgs in addition to provide rubber pad in 3mm thick to be provided for legs.
LOCKER STEEL FD-1029 Removing the existing unserviceable/damaged shelves for locker steel and S&F MS sheet CRC 1mm thick bent to shape and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker/clips and all as specified and shown on drg.
LOCKER STEEL FD-1029 Removing the existing unserviceable/damaged heps and staple for locker steel and S&F with a new heps and staple all as approved by Garrison Engineer.
CHAIR DINING OR MAP FD/MAP-II/05 Removing the unserviceable PVC seat from Chair Dining (MAP) and supply and fix new suprior quality PVC seat. All as shown on drg and as directed by Engr-in-Charge.
CHAIR DINING OR MAP FD/MAP-II/05 Supply & Fixing 1st class hardwood stiffner of size 360 x 30 x25mm in middle of the seat frame fixed appropriately with 04 Nos bamboo pins with both side rail of chair dining all as specified and directed by Engr-in-Charge.
ALMIRAH LARGE/MEDIUM STEEL. FD-1032 FD-1031 Removing the existing unserviceable three way locking device and S&F three way locking device with cover all as directed by the Engr in Charge and shown on drgs for almirah large steel
All as per item No 108.00 herein before but almirah medium /small steel
ALMIRAH LARGE / MEDIUM STEEL. FD-1031, FD-1032 Removing the existing unserviceable locks and S&F locks of appropriate size 6 levers with duplicate keys chromium plated Make Godrej (product No 3936) or equivalent as suitable in almirah with suitable fixing arrangement all as directed by Engr in Charge and shown on drgs for almirah large/medium steel. Notes : (i) Unit rate quoted shall include for provision/repairs to back plate cover to key hole back side cover locking device etc. (ii) Steel chromium plated handle shall be measured and paid separately.
ALMIRAH LARGE / MEDIUM STEEL. FD-1031, FD-1032 Removing the existing unserviceable handle and S&F new chromium plated handle 125mm long to almirah large/medium/small steel all as specified/directed and shown on drg.
ALMIRAH LARGE . FD-1031 Preparation of old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by Garrison Engineer on all external and internal surfaces of almirah large steel as specified and as directed (Size 920 x 485 x 1985mm) by Engr-in-Charge.
ALMIRAH MEDIUM. FD-1032 All as per item No 112 here-in above but almirah medium (760 x 440 x 1270 mm).
ALMIRAH LARGE . FD-1031 Removing the existing unserviceable/damaged/ broken legs for almirah large and S&F with a new legs made out of 18 G sheet with applying one coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs.
ALMIRAH MEDIUM. FD-1032 Removing the existing unserviceable/damage/broken legs for almirah medium and S&F with a new legs made out of 18 G sheet with applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the almirahs and all as specified and shown on drgs.
TABLE OFFICE OFFICER STEEL FD-1002 M&L cleaning/preparing the existing surfaces of table office officer steel including inner surfaces of drawers and applying one coat of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish and to fix rubber toe for all legs all as directed.
TABLE OFFICE OFFICER STEEL FD-1002 Removing existing unserviceable locks with new one with duplicate keys as existing all as specified and shown on drg. (Make - Godrej or Lico or as approved by GE).
TABLE OFFICE CLK STEEL FD-1004 M&L cleaning /preparing the existing surfaces of table office clerks steel including inner surfaces of drawers steel including one coat of synthetic enamel paint as approved by Garrison Engineer by spray process to achieve a uniform finish and to fix Hard rubber shoe for legs all as directed.
TABLE OFFICE CLK STEEL FD-1004 Replacement of unserviceable locks with new one with duplicate keys as existing all as specified and shown on drg. (Make - Godrej or Lico or as approved by GE).
Chair Verandah FD-256 Removing the existing unserviceable cane from Chair Verandah and recanning of chair verandah with best quality of Make Maharashtra/Swastik Industries of approved plastic cane 4mm wide as per trade pattern all as specified and directed by Engr-in-Charge
Chair Verandah FD-256 Painting to frame of chair verandah with one coat of synthetic enamel paint white colour as specified and shown on drawing and as directed by Engr-in-Charge
Chair Verandah FD-256 S&F new hard rubber toes of appropriate size suitable to chair verandah all as specified and shown on drawing and as directed by Engr in Charge
Bed Hard steel Offrs FD/E6/MAP/08 (R) Removing the existing plywood from bed hard steel and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour as approved by Garrison Engineer on all external and internal surfaces and refix the plywood of under mentioned bed hard steel as specified and as directed by Engr-in-Charge. Note : New plywood rates will be paid seprately
Bed Hard steel Offrs FD/E6/MAP/08 (R) Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mm with headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge
Charpoy GI Pipe Plywood top FD-220 Removing the existing unserviceable plywood from Charpoy GI pipe Plywood top S&F new plywood BWR Grade ISI marked of size 1980 mm x 900 mm rounded edges on four corner fixed with MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge
Charpoy GI Pipe Plywood top FD-220 Removing the unserviceable/broken check nuts from GI charpoy & supply and fix 6mm thick GI Medium grade check nuts suitable for 32mm dia GI pipe all as specified and shown on drawings (Each check nut will be measured as single unit)
Charpoy GI Pipe Plywood top FD-220 Removing the unserviceable broken 3 way GI elbow from GI charpoy & S&F 32 MM dia GI medium grade 3 way elbow ISI marked all as specified and shown on drg and directed by Engr-in-Charge (Each Elbow GI shall be measured as single unit)
Charpoy GI Pipe Plywood top FD-220 Removing the existing unserviceable/broken long rail from GI charpoy and S&F new long rail of GI tubing medium grade 32 mm including cutting, threading and bringing the GI charpoy into the original shape as shown on drawing and directed by Engr-in-charge Make- Jindal/Suryapraksh/Zenith/Appolo
Charpoy GI Pipe Plywood top FD-220 Making short rails obtained from item No 4 above and fixing all as shown at item No 4 above
Charpoy GI Pipe Plywood top FD-220 Making legs out of unserviceable long/short rails obtained from item 4 & 5 above including cutting, threading and fixing all as specified and directed
Charpoy GI Pipe Plywood top FD-220 Plate welding-supply and welding 3mm thick 45mm dia MS bottom plate for GI charpoy leg all as shown on drawing and as directed by Engr-in-Charge (each base plate will be measured as single unit).
Charpoy GI Pipe Plywood top FD-220 Clamp Welding -supply and welding flat Iron 25 mm x 33 mm mild steel clamps made to shape as shonw in drg shall be welded in GI charpoy leg all as shown on drawing and as directed by Engr-in-Charge (each clamp will be measured as single unit).
"Chair Easy Cushioned FD-358" Taking out old unsv seat from chair easy cushioned and Supply and Fixing new 75mm thick foam cushion of 32 Density shall be fixed on 12mm thick BWR plywood of seat. And new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr-in-Charge shall be provided. Make of foam shall be Kurlon/Sleep well.
"Chair Easy Cushioned FD-358" Taking out old unsv back rest from chair easy cushioned and supply and fixing new 50mm thick foam cushion of 32 density shall be fixed on 12mm thick BWR plywood of back rest. And new existing size and shape alongwith cover foam shall be upholsted with leatherised rexene of approved shade and texture of best quality as approved by Engr-in-Charge shall be provided. Make of foam shall be Kurlons/Sleep well.
"Chair Easy Cushioned FD-358" Taking out old unsv arms from chair easy cushioned and S&F new arms as per existing size and shape complete all as specified and as directed by Engr-in-Charge.
"Chair Easy Cushioned FD-358" (135.01) S&F new legs
"Chair Easy Cushioned FD-358" (135.02) S&F new short & side rails
"Chair Easy Cushioned FD-358" (135.03) S&F new long rails
"Chair Easy Cushioned FD-358" (135.04) S&F new short stiffeners
"Chair Easy Cushioned FD-358" (135.05) S&F new long stifferners
"Chair Easy Cushioned FD-358" (135.06) S&F new rubber/PVE shoes provided to the bottom of legs
"Chair Easy Cushioned FD-358" M&L for polishing of two coats of French polish of best quality to the chair easy cushioned after preparation of old surfaces as specified and as directed.
Chair Writing Steel MAP ( FD/E6/MAP/12 ) Removing the existing unserviceable Seat (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. with PVC lipping all around to them in all respect of Make : Godrej or equivalent approx size of seat 510 x 470 x 60) from Chair writing steel MAP and S&F of new Seat all as shown on drg and as directed by Engr-in-Charge.
Chair Writing Steel MAP ( FD/E6/MAP/12 ) Removing the existing unserviceable Back (12 mm thick hot pressed ply wood, upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping all around to them in all respect of Make : Godrej or equivalent approx size of seat 510 x 470 x 60) from Chair writing steel MAP and S&F of new Back all as shown on drg and as directed by Engr-in-Charge.
Chair Writing Steel MAP ( FD/E6/MAP/12 ) Plate welding-supply and welding 3mm thick 45mm dia MS bottom plate for Chair writing steel MAP all as shown on drawing and as directed by Engr-in-Charge
Chair Writing Steel MAP ( FD/E6/MAP/12 ) Removing the existing unserviceable Arms from Chair writing steel MAP and S&F of new Arms all as shown on drg and as directed by Engr-in-Charge.
Charpoy IP hardtop FD/MAP-II/01 Removing the existing plywood from charpoy IP hardtop and preparation of old painted steel surfaces and applying one coat of synthetic enamel paint colour as approved by Garrison Engineer on all external and internal surfaces and refix the plywood of under mentioned bed hard steel as specified and as directed by Engr-in-Charge. Note : New plywood rates will be paid seprately
Charpoy IP hardtop FD/MAP-II/01 Supply only new plywood BWR Grade ISI marked of size 1980 mm x 900 mm with headless MS nut & bolt 6 mm dia 75 mm length with washer and directed by the Eng-in- charge
Rack 6 tier steel 915x610x1905 mm M&L for preparation of old painted steel surfaces ie. de-rusting, filling putty, denting and applying two coats of synthetic enamel paint as approved by Garrison Engineer by spray process on all external and internal surfaces of rack 6 tier steel to achieve a uniform finish complete all as specified and directed.
M/S BIJOYA LAXMI ENTERPRISE
APPLE CONSTRUCTION
MANI PRASAD GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .