WBPWD/EE-I/CKHED/eNIT114/24-25

Amount

Distn. wiring in 3 x 1.5 sq. mm single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish. 2 x 1.5 (Ph. & N) and 1 x 1.5 as ECC.

Averag run - 8 Mtr. [1 (iii) / E- 20]

Distn. wiring in 3 x 1.5 sq. mm single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythene pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6 A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish.

On Board [3 (i) / E- 20]

Average run 4.5 mtr [3 (iv) / E- 20]

Supplying and fixing 100A 415V TPN with fuse on L&N Sheet steel Main Switches on angle iron frame on wall(Havells) .[D-1/1(b)]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. [Make : Legrand/ Siemens / L&T/ ABB/ Schneider ] [D-9/13]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS. [Make : Legrand/ Siemens / L&T/ ABB/ Schneider ] [D- 10/14 ]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment. [16 / D- 12 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (Make- Legrand/L&T/ABB/Siemens/Schneider) [D-5/6]

40 A DP (Legrand)

63 A FP (Legrand)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection . (Make- Legrand/L&T/ABB/Siemens/Schneider) [D-6/7]

6-32 A SP MCB

Supply & Fixing 240 V, 2 nos. 6 A, 3 pin Modular type plug socket with 2 nos. 6A Modular type switch (Brand approved by EIC), without plug top on 6 Module GI Modular type switch board with 6 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy.connections with PVC Cu wire and earth continuity wire etc. [1.b/E-17+3a/E-17+4a/E-17]

Supply & Fixing 240 V, 3 nos. 6 A and 1 no 16 A, 3 pin Modular type plug socket with 3 nos. 6A and 1 no 16A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy.connections with PVC Cu wire and earth continuity wire etc. (For computer board and medical instruments)[1.f/E-17+3a/E-17+4a/E-17+3b/E-17+4b/E-17]

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [E-18/9/b]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene/G.I. pipe as per GS. [ Make : Polycab/ Gloster/ KEI/ RR Kabel/Havells] [1 (y) / E- 9 ]

3 x 22/0.3 (1.5 sqmm) (For 2x6A PComputer)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC (For computer and PP)

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [F-5/9]

3 x 22/0.3 (1.5 sqmm)

2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles

19 mm dia 3 mm thick polythene pipe without earth continuity wire [ E- 3/6(a) ]

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)

19mm dia 3mm thick Polythene Pipe

Supply & Deliver of 4 feet Industrial box type single LED fitting including S & D of 1X20 wattt LED( Polycarbonate) with glare free light distribution with CCT (5000K-6500 K) , with minimum luminious efficacy ≥105 lumen/watt or better. The LED Lamp and accessories shall have BEE Certification.

Supply & Delivery of 4 feet Industrial box type Twin LED fitting including S &D of 2X20 wattt LED( Polycarbonate) with glare free light distribution with CCT (5000K-6500 K) , with minimum luminious efficacy ≥105 Lumen/watt or better. The LED Lamp and accessories shall have BEE Certification.

Supply& Delivery of 240V 9 W LED lamp (minimum Luminous Efficacy 100lm/w.) (Make : Panasonic / Crompton/ wipro/ Bajaj/ Havells)

Supply& Delivery of 10 watt LED Bulk Head or higher with minimum luminious efficacy 100 lumen/wt. (Make : Philips - Signify/ Panasonic / Crompton/ wipro/ Jaquar/Bajaj/ Havells) D-13/23

Fixing only single / twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener. [14.b/C-2 ]

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [ 17/C-2 ]

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit as per GS. [16/C-2 ]

Fixing only lamp to batten point. [11/C-2 ]

Fixing only bulk head /ceiling fitting on wall /ceiling by screws etc as per GS. For Lift shaft & Pit [13/C-2 ]

Fixing of Mirror Light /wall bracket on wall by screws etc as per GS.

Supply and delivery of Heavy Duty Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC /Crompton/Orient/havells )

12"( 300 mm ) Speed 1420 RPM

S & D of 1200mm sweep AC ceiling fan with out regulator, complete with P2 burst proof Capacitor, Down rod, blades, canopy, rigidly connected Safty Tie wire etc. Incl. other accessories as necessary. (Make - Cromton / Usha / Orient)

S& Fixing only 18" (450mm) 4 (four) Blades Industrial type Bracket Fan (air circulator typr) complete with all accessories(Approved Make) to be grouted on wall inclu. Making necesy. Connection as per direction of the EIC for lift m/c room.(Make -EPC /Crompton/Orient/havells ).

Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [29/D-14 ]

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. [ 31/D-14 ]

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc [ 10 / E-18 ]

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS [ 21 (a) / C-3 ]

Engraving the deptt. number with 10 mm lettering on the body as per GS. [ 24 (a) / C-3 ]

Extra for additional one letter incl. hifen, stroke and stop as per GS. [24 (b) / C-3 ]

Painting upto 10 letters of the engraved number with approved black /red paint as required as per GS [ 26 (a) / C-3 ]

Extra painting for additional one letter of the engraved number as per GS. [ 26 (b) / C-3 ]

Fixing only exhaust fan after making holes in wall as per GS

12" Exhaust [28(b)/C-4]

Supply & Fixing louver shutter ( Aluminum)on wall with necy. bolts & nuts (6 mm dia x 62 mm long) as per GS

12" Exhaust [ 32(a)/D-14 ]

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe. (G-1/2a)

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [G-2/3(a)]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode. [G-2/3(b)]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required . [G-2/4(c)]

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages . [G-2/5(a/b)]

Stranded GI wire (i) 7/14 SWG

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projectedfrom the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. (C-3/18)

S&F of 240V, 70 watt or higher , LED Street Light including IP65 protection with CCT ( 5700-6500) & minimum Luminious efficacy>= 110 Lumen/ Watt. (Make : Panasonic / wipro/ Jaquar/Bajaj/ Havells) Philips -BRP032 P LED 75 CW SLR PSU GR SPD.

S & F 32A 415 V timer controller in double door phosphatised powder coated 10 way SPN DB, din rail with IP-43 protection with electrical accessories & front door locking arrangement with all connection , a)14+2 W SPN DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. -1 (one) no. b) 32A 4P MCB (10kA, C curve)—1(one) no c) 32 A 4P MCB Isolator—1(one) no d) 32 A, 415 V TP Contactor with Auxilary Contactor(1 NO-1 NC)- 1 (One) no. e) Daily & weekly programmable basis astro digital time switch, min switching time 1 min, 25 ON/OFF programs,6 yrs. Battery backup, settable DST & key pad lock features- 1 (one) no f) Indicator LED Lamp- 1 (one) g) Blank Plate as required. [ Legrand /Schneider/Seimens/ABB/ LK ] (For Compound Light -three Phase Timer )

Supply of 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make : Havells/ Gloster/ Polycab/ KEI]

4 Core 6 Sq. mm

Laying of cable upto 35 sqmm in underground trench as per GS [1.a/F-2] as necy., mending good damages and painting.

Laying of cable upto 3/4 Core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. [2.b/F-1]

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/ 4 / 3.5)Core as per GS.

4 Core 6 Sq. mm [7(c)/F4 & 8(b) /F5]

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene/G.I. pipe as per GS. [ Brand approved by EIC]

3 x 1.5 sq. mm [ 1(b) / E-9 ] [2 x 6 A plug & FCU]

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. (For Sign board)

Supply of 4 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make : Havells/ Gloster/ Polycab/ KEI]

4 Core 25 Sq. mm

Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.

4 Core 25 Sq. mm [F-1/2/b]

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/ 4 / 3.5)Core as per GS.

4 Core 25 Sq. mm [7(c)/F4 & 8(b) /F5]

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

ALPHA ELECTRICALS (BID ID -6133690)

DEPALI CONSTRUCTION (BID ID -6148341)