Repairs Replacement to Aluminium Doors Windows and False ceiling and Steel Joinery and allied works in SMQ OMQ and OTM Accn at AF Stn Singarsi Under AGE I AF Singarsi

Amount

Taking down of chowkats or frames w/o taking down shutters nexc 1.50 Sqm

All as per item No 01 but area exc 1.5Sqm but not exc 4.00 sqm

Taking down shutter of any description n exc 1 Sqm each.

Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm each.

S/F of 2nd class hard wood 35mm thick factory made skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.

S&F 2nd class hard wood 35 mm thick factory made paneled door shutter ( two pannel) factory made with lock rail and panel of 9 mm thick BWP commercial ply or 12 veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (part-I) klin seasoned and chamically treated all as spacified and as directed.

S &F 35 mm thk Flush shutters, solid core construction, particle board core and plywood face panels, commercial type on both sides including with lipping complete all as specified and directed by Engr in charge.

S&F 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete

M&L for 0.80 Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with

S&F mild steel MS flat 25x3mm thick for hold fast

M&L for PCC (1:3:6) type C-1 as in hold fast block etc.

S&F MS Butt hinge 75mm ,Cold Rolled Medium weight.

S&F MS butt hinges, cold rolled medium weight 100mm in size

S&F MS butt hinges, cold rolled heavy weight 100mm in size

S/F of aluminium anodized,tower bolt 200 mm long

S/F of aluminium alloy anodised sliding door bolt 300 mm woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F aluminium handle, cast type 100mm in size

S&F aluminium handle, cast type 150mm in size

S&F 150mm floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm longs.

Taking down steel window/ventilator including guard bar.

S/F of steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified.

All as per item No 22 but without glazing bars

M& L steel ventilator with top hung shutter including hinges steel peg stay , complete.

All as per item No 24 but as in ventilator top hanging shutter without glazing bars

Supply and fabrication of Mild steel guard bars and welded to window frames all as specified.

M/L for two coat of enamel paint(First quality) over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth all as specified.

S/F of 4mm thick figured glass pinheaded sheet glazing with oil and putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

S/F for 3 mm thick plain glass ordinary quality & glazing with oil and putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm complete all as specified and directed.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified .

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). Mild steel hinges type B-21 100mm long (3 No.) suitable handle (2 No.) complete all as specified

Taking down/ refixing aluminium doors of any size including necessary repairs works if requires to aluminium section ,floor spring, door closer,door lock complete all as specified.if hardware item is not repairable the same shall be replaced with new and payment shall be made under respective items.

S&F double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made up of brass, other parts made of mild steel heavy duty and fixed.

S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor

S&F MS lock, vertical type suitable for aluminium door,size 150 mm complete all as specified.

S&F MS lock, vertical type suitable for aluminium door, size 100 mm

S&F MS lock, vertical type suitable for aluminium door, size 75 mm

S/F in repair for 3 mm thick plain glass ordinary quality & glazing with oil and putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples.

Taking down cement plaster on brick or stone walls,etc.including racking out joints, hacking for keys ,scrubbing down with water,etc complete all as specified and as directed.

M&L for Rendering 15mm thick in Cement Mortar 1:6 on other than Fair Faces of Brick Work or Concrete Surfaces, finished Fair and Even surface all as specified and as directed.

M&L for two coats of oil bound distempering over a coat of priming on plastered surface with alkali-resistant priming coat over a coat of birla white putty on newly plastered surfaces of wall including preparation of surface complete.

M&L for three coats of white wash on newly plastered surfaces of wall including preparation of surface complete.

M&L for two coat of cement base paint to new plastered surfaces of wall including complete removal of existing surfaces and preparation of surface complete.

S&F 5000 Ltr Triple layer Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old all as specified in SSR Part- I incl taking down old PVC Tank.

Demolition of brick work built in cement mortar including all quoins, pillars, arches etc complete all as specified and directed by Engineer -in-Charge. .

M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 etc complete all as specified and directed by Engineer -in-Charge.

M&L for Brick work with fly ash bricks, straight or curved on plan to any radius built in half brick thick wall in cement mortar 1:6 etc complete all as specified and directed by Engineer -in-Charge.

S&F in in repair Stainless steel peg set of six fixed to wall complete all as specified and directed as approved by Engr in charge.

Material and labour for 7 to 9 mm thick Pre painted gypsum building boards of size 595 x 595mm PVC laminated at back side of board insulation & acoustic purpose flat in ceiling fixed or laid / including powder coated GI snap grid of size 605mm x 605mm frame work using 36.50 x 23.50 x 1.5mm main Tee, 23.50 x 23.50 x 1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4 mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed including dismantling of old U/s existing false celling of any description. NOTE: (The rate inclusive of scaffolding and necessary arrangements).

Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails,filling cracksand making good holes with birla white putty, and brooming to remove all dirt etc and applying one coat of Oil bound distemper on old prepared surfaces of walls complete all as specified and directed by Engineer-in-Charge.

Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coats of oil bound distemper on walls after applying a layer of wall putty to make surface even and smooth complete all as specified and directed.

DANATION CONSTRUCTIONS

P .BANERJEE AND CO

M/S KUMAR AVINASH

M/S AMARNATH AGARWALLA

LALAN SHARMA

M/S Subhadip Enterprise

M/S New Builders Corporation