SPL REPAIR OF BUILDING NO CC-87 AND SPL REPAIRS TO KITCHEN / COOKING AREA AND RATION STORE OF COMBAT MESS AWC UNDER GE (AWC) MHOW

Amount

Demolition of stone slabs laid bedded and pointed in cement mortar , of any description or thickness in floors, aprons , cover slabs of drain etc. all as specified.

M & L 18-20 mm thick machine cut one side polished black granite in kitchen plate form, windows ceils , stair case etc set and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing and 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L 20 to 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 15 mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed.

Description all as per item No 3.00 above but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges( any type) and polishing to match the adjoining surfaces complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M & L for vitrified cerameic tiles 8-10mm thick light shade (square/rectangular ) polished, area of each tiles not exceeding 0.36 sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:6 complete all as specified and directed.

Description all as per item No 7.00 above but laid in vetical surface such as skirting/dado over 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labour Non-skid joint free coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm,(400X400mm) in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed of CM (1:6)

M&L glazed ceramic coloured tiles 450 x 300 x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) complete all as specified.

Taking down chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) complete all as specified.

S & F 165 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast includ etc., complete as specified

S & F 105 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast includ etc., complete as specified

S & F 35mm thick 2nd class hard wood Plain framed panelled shutter(any number of panels) with panels ot timber flat on both sides (feather edged), or of veenerd pparticle board medium density, wood particle board with commercial face veneers, fixed to chowkats complete all as specified and directed.

M&L 35 mm thick, 1st class hardwood wood (sal) Glazed and skeleton door shutters , open rebated and prepared to receive glass, gauze, etc. ( without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass/gauaze complete all as specified.

M & L for preparing new wood or wooden based surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete.

M & L Preparation of old painted wooden surfaces of any description not otherwise description over 10 CM width or grith and apply one coat of synthetic enamel complete all as directed.

Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt, ISI marked complete all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 200 mm length of bolt, ISI marked complete all as specified.

S&F Butt Hinges, medium weight, cold rolled mild steel, 100 mm size, ISI marked complete all as specified.

S&F Aluminium handles, cast type anodised 'D' shaped , 150 mm long ISI marked all as specified.

S&F 250 mm long Aluminium alloy anodised, sliding door bolt with hasp, staple ( bolt type) ISI marked and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

Supply only Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm and fixed with tinned tacks or nut and bolt with ms flat strip fixed to steel windows , wooden doors etc ,or galvnized wire staples complete all as specified and directed.

S & F in repairs 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.

M & L for PCC 1:2:4 type C-1 (using 12.50 mm graded stone aggregate) as in hold fasts,chowkhats including necessary use and waste of form work complete all as specified and directed.

Demolition cement concrete (unreinfoced) of any description and in any position not otherwise specificially provided for.

M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L Brickwork with modular sub class 'B' bricks, straight or curved on plan exceeding 6 M mean radius in built in cement and sand mortar 1:6 complete all as specified.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. and removing of the rubbish outside MD land complete all as specified .

M & L Plastering 15 mm thick in two layers of 10 mm thick in bottom and 5 mm thick with WPC of top layer in Cement Mortar 1:4 on Fair Faces of Brick Wall, Cement block wall or on Concrete Surfaces, Surface Finished Even and Smooth without using Extra Cement complete all as specified and as directed.(WPC will be measured and paid separately)

Suppl only integral water proof compound and mixed with required qty as specified and directed.

M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M & L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement complete all as specified and directed..

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

S&F ( in repairs) PVC valveless, syphonic action type flushing cistern, low level white or colour with inlet, ball value, float and handle including brackets and provision of 32 mm dia PVC flush pipe and making connections, complete all as specified and directed.

S&F Rotational moulded poly-ethylene water storage tanks (triple layered) ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position including dismantling of PVC water tanks exc 250 ltr but not exc 500 ltr complete all as specified and directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms.) complete all as specified.

S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed.

S & F( in repairs) Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F in repairs 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S & F in reapairs 75 mm dia PVC (SWR) bends any radius

S & F in repairs 110 m dia PVC (SWR) bends any radius

S & F 75 mm bore PVC cowl including taking out existing unserviceable cowl complete

S & F 110 mm bore PVC cowl including taking out existing unserviceable cowl complete

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed to complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed to complete all as specified and directed.

S & F (in repairs) 75 mm bore cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified .

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat red oxide complete all as specified and directed.

M & L Preparation of old steel surface of any description over 10 cm in width or grith not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking up or down steel tubing 15 mm dia bore and connection including removal from site complete all as specified and directed .

Taking up or down steel tubing 20 mm dia bore and connection including removal from site complete all as specified and directed .

S & F of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 with all fittings including brasss bends, Tee, reducer etc. fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, complete all as specified and directed.

S & F of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 with all fittings including brass bends, Tee,reducer etc. fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections, complete all as specified and directed.

S & F in repairs counter top oval shape vitreous china wash hand basin white or any colour , flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting including mixer or piller tap etc complete. Note :- Pillar tap shall be measured as supply only under respective item

M & L complete removal of old decorated plaster or un-plastered surfaces of ceiling and applying one coat of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete complete all as specified and as directed.

Complete removal of exisiting wall treatment on old plaster or concrete surface by scraping tin plate, leaned of all laitance , loose material, oil grease by mechanical means such as wire brushing & shot blasting , finally vacum cleaning of all loose solid particals complete all as specified and directed.

M&L for applying 1 mm thick wall care putty on wall on internal/external, old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as per specified and directed.

M & L apply one coat of Dr Fixit crack-X paste OR Dr Fixit Crack - X shirnkage,wall crack filler on prepared old/new wall surfaces and apply one coat primer of DR Fixit Primeseal diluted with potable water by volume in 2:1 ratio (2 parts primer and 1 part water) and allow it dry for 2 to 3 hours over a coat of crack filler over a coat of 1mm thick external wall putty and apply two neat coats ( one coat horizontal and other coat vertical direction) of Dr Fixit Raincoat Elastomeric Acrylic water proof exterior coating (of white or any tint/colour which shall be approved by GE), apply by brush or roller at a time interval of 5- 6 hours complete all as specified and as directed. Note :- 1)All application shall be done through authorised company applicator as aproved by GE. 2) putty shall be measured paid separately

M & L preparing old decorated plaster or un-plastered surfaces of ceiling and applying one coat of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete complete all as specified and as directed.

S & F in repair corner shelf of 300 mm size with ABS brackets complete.

Supply only 15 mm dia bore basin mixture brass chromium plated with capstan heads screwed down high pressure with or without letter ‘HOT’ or ‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair 15 mm dia bore chromium plated 3 in 1 wall mixer non telephonic shower arrangement with connecting legs & wall flanges complete all as specified and as directed.

S & F in repair Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed.

S & F in repair PVC bath cabinet box mirror type with shutter complete.

S & F in repair CP Thumbler Holder, complete all as specified and directed by Engineer-incharge.

S & F in repair CP Soap Dish with ABS dish Holder, complete all as specified and directed.

S & F in repair CP Toilet paper holder, complete all as specified and directed.

S&F in repair Chromoium plated fancy type Stop Valves/ Angle Stop Valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore complete all as specified and directed.

S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleatscomplete all as specified and directed.

S & F in repair over head shower with arm & flnge of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union complete all as specified and directed

S & F( in repair) 15 mm bore two way bib taps long body, with wall flnge chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.

S & F( in repair) 15 mm bore bib taps long body, with wall flange chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.

Demolition of reinforced cement concrete of any descrption and any position as in roofs, floors,beams, landings, chajjas, balconies, cover slabs and similar suspended work complete all as directed.

S & F Framed work as in grills for balcony, of MS tube for top rail and MS square bars for as guard bars, or rolled section as in sunshade, side supports or any situation of work etc, revited or forged in to spikes and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed.

S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed.

S & F in repair 25mm dia stainless steel curtain rod of 1 mm thick fancy type fixed with modren bracket of any type or any design as approved by Engr -in Charge complete all as specified and directed

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included in the quoted rate of contractor

S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.

S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

M&L for 15mm thick rendering in CM 1:3 on concrete/brick surface finished even and smooth without using extra cement mixed with WPC ( WPC shall be measured and paid separately )

M & L for applying one prime coat of acrylic polymer modified water proofing coating(Brushbabd of FOSROC or equivalent) and over that two coats of acrylic polymer modified two component elastomeric water proofing membrance coating (Brush band of fosroc mate or equivalent) complete all as specified as per manufacturers instruction as directed. Note :-1 . This item shall only be executed through level 4 or level 5 certified and authorised applicator of the company. 2. A warranty for 5 yerars in the form of written agreement shall be submitted by the contractor. 3.The rate quoted by the contractor shall include all the provision mention in this item including notes.

M & L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in mas concrete complete all as specified and directed.

M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm, complete all as specified and directed.

S&F in repair factory made PVC side laminated shelf /partition of any colour of required size consisting of panel of 18mm thick celuka PVC board and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC Sheet of density 600 Kg/Cum manufactured by ISO 9001 - 2015 Cerfified campany , using solvent cement etc.complete as direction manufacturers specification and drawings.

S&F stainless steel 100mm long decorative type handle for cupboard/kitchen cabinet with necessary fittings complete all as specified and directed.

S & F 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F 30mm width of flaps continuous piano hinges mild steel, bright finish or electrogalvanised complete

M & L for Roughening / taking down existing roof treatment surfaces including plaster over old concrete roof by picking, sweeping clean and washing down with water to remove dust etc. all as specified and directed.

M & L Cutting out cracks to 6 mm wide 'V' section in existing roofs or terrace (if cracks > 2.5 mm wide), cleaning out, wetting, grouting with and including chemical compound SUPER LATEX of DR. FIXIT of PIDILITE INDUSTRIES LTD or SBR LATEX of STP LTD,, water and cement in the proportion of (1:4:7) by weight mix or as per manufacturers instructions all as specified and directed complete.

M & L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with integral waterproofing chemical PIDIPROOF LW of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID) of STP LTD @ 200 millilitre per 50 Kg per cement, as in padding on roof surface for correcting / making proper slope on roof, and finishing the surfaces fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.

M & L 10 mm thick rendering in CM (1:3) mixed with integral water proofing chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or STP No 1 (liquid) of STP Ltd @ 200 mililitre per 50 Kg cement as per manufacturers instructions over concrete surface and finishing the surface fair and even without using extra cement complete all as specified. Note:- Liquid WPC shall be measured and paid separately.

Supply only liquid water proofing compound.Make:- SUPER LATEX or DR. FIXIT of PIDILITE INDUSTRIES LTD and PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or equivalent make as approved by GE.

M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete. (i) Cleaning of new rendered surfaces properly and drying the surfaces. (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.30 Kg / Sqm (iii) Laying min 3 mm thick APP modified water proofing membrane weighing 3kg /sqm & reinforced with polyster non woven fabric ( wt not less than 150 gms/ Sqm) with 100 mm overlaps sealed and bounded to the surfaces by forced application & 'torchon' method. (iv) Applying two coats of bitiminous aluminium paint @ 200 Gram / Sq M (minimum) in two coats .Make incorporated : HYPERPLAS POLYSTER OF IWL (INDIA) LTD or equivalent in Pidilite industrries Ltd /STP Ltd all as specified and as manufacturer instruction complete.

M&L Machine cut kota stone slab flooring 16-18 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Machine cut kota stone slab flooring 16-18 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of Cement Concrete (Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of floor complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring average 25 mm thick surface finished even and rough (as in levelling course) to receive the topping layer complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6 for laying of Kota Stone complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for 16 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for Rendering 10 mm thick in cement mortar 1 : 4 for fixing of wall tiles complete all as specified and directed.

S&F in repair 75mm/110mm PVC (SWR) floor trap, plain with grating,jointing with solvent cement as per site requrement all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for Old Size Brick work with fly ash bricks straight or curved on plan exceeding 6 m mean radius complete built in cement mortar 1:6 complete all as specified and directed.

M&L for Old Size Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on newly plastered walls surfaces making absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall or concrete surfaces on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceilings and apply three coat of white wash complete all as specified and directed.

M&L preparation of old painted surfaces and applying one coat of white wash but on ceiling complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as speified and directed.

M&L for pre cast cement concrete 1:1.5:3, type A-1, using 20mm graded stone aggregate as in Slabs or slab plates manhole cover slabs and similar articles with plain faces, set in CM 1:4 complete all as specified and directed.

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed

M&L in repairs PVC Celuka Foam board 18/19 mm thick, interior grade, prelaminated one side with decorative choice (Wooden grain) lamination & other side balancing white lamination, fixed with frame work including necessary magnetic catchers complete all as specified and directed.

S&F 150 mm Extruded brass handles, fabricated type polished complete all as specified and directed.

S&F 100 mm Extruded brass handles, fabricated type polished complete all as specified and directed.

S & F Continuous (piano) hinges of brass with 40 mm width of flaps , bright finish or electrogalvanised complete all as specified and directed.

S&F Hasp and staple 100 mm, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Self Closing Hinges (3D Hinges) fixed with screws complete all as specified and directed.

S&F Self Closing Channels for Drawers fixed with screws complete all as specified and directed.

S&F Stainless Steel Handles Oval Shaped 200 mm size complete all as specified and directed.

S&F Stainless Steel Handles Oval Shaped 100 mm size complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) (Area not exceeding 2.00 sqm)

S&F Rotational moulded polyethylene Triple layer water storage tanks 1000 Litre Capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed.

S&F Ball valves for 25 mm bore dia of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 25 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 25 mm bore of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Bricks/ stone Masonary wall complete all as specified and directed.

M&L for Cutting holes into or through brick walls built superficial area n exc 150 sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

S&F in repairs Single Bowl type sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, inlcuding connecting waste pipe to grating and CP Coupling, overall size 810 mm x 510 mm x 225 mm complete all as specified and directed.

S&F in repairs Sink Stainless Steel Double Bowl type without drainage board 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe,inlcuding connecting waste pipe to grating and CP Coupling, overall size 925 mm x 450 mm x 250 mm complete all as specified and directed.

Supply Only Mild Steel Thee Shelves Commercial Plate Rack 1800 mm size complete all as specified and directed.

S&F in repair Chromoium plated fancy type Stop Valves/ Angle Stop Valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore complete all as specified and directed.

S&F in repair Bib taps (long body) fancy type chromium plated 15 mm dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs LDPE pipe 50mm of pressure rating 6Kgf/sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/ kerbs/ sunken slab etc complete all as specified and directed.

M&L 10 mm thick rendering on roof surfaces/ concrete surface in CM 1:4 with liquid water proofing compound @ 200 ml per 50 Kg cement complete all as specified and directed. (Waterproofing compound should be measured and paid separately).

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe com plete all as specified and directed.

M&L for salt glazed stoneware (SGSW) drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed in CM 1:1 complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L in repairs salt glazed stone ware gully traps size 150 x 150mm, square or round mouthed, type ‘P’ including setting and jointing to drains with CM 1:1 including demolition of existing traps complete all as specified and directed. (Note: CI grating will be meaured separately).

M&L for Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed.

M&L for Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil etc complete all as specified and directed

M&L for Removing excavated material (Soil) exc. 50 m and depositing where directed complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L preparation of new steel surfaces of any description n exc 10cm in width or girth and priming with red oxide zinc chrome and applying two coat of synthetic enamel paint complete all as specified and as directed.

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M No II complete all as specified and as directed.

Taking down existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M No II complete all as specified and as directed.

M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for the following complete for One light / fan /bell controlled by one, one way switch 5/6 Amps all as specified and as directed .

Description all as per item No 176.00 above, but for one 3 pin, 5/6 amps socket outlet point on independent board controlled by one, one way 5/6 amps switch

Description all as per item No 176.00 above, but for one 3 pin, 5/6 amps socket outlet point on same board controlled by one, one way 5/6 amps switch

M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one 15A socket point independent complete incl taking down of old unsv point wiring all as specified and directed.

Description all as per item No. 179.00 here in before but using 4.0 sq mm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm PVC insulated copper conductor FRLS cable as earth continuity conductor along with wiring and connecting to the common eath dolly. (for AC Point)

S&F in replacement of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed.

S&F modular switch 1 way 6 A , 1 module complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified and directed.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified and directed.

S&F modular bell push type 6 A ,1 module complete all as specified and directed.

S&F bell multi music type AC 230 volts single pole complete all as specified and directed.

S&F surface /wall mounted LED batten fittng slim channel type poly carbonate body T-8 tube light luminare with system efficiency 120 lumens per watts. High quality polycarbonate end cap in white finish and snap fitted to the housing complete all as specified and directed. integrated electronic driver complete with all connected accessories all as specified and directed.

Supply and fixing wall mounted LED tube light fitting 10 watts comprising batten of extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 10 W LED 2 feet long ,THD less than 15% complete all as specified and directed.

M&L for Modular angular holder with LED Bulb 9 watts complete all as specified and as directed

M&L for LED Bulk head fitings 6.5 watts designed for modern homes available with premium quality diffuser for glarefree light and easy to install snapfit installer complete including taking down of old CFL/bulb bulk head fitting, making good of surfaces all as specified and directed.

S & F LED bldg security light fitting 30 watt made up of pressure die cast aluminium housing with acylic cover as diffuser with IP-66 protection complete incl mounting pipe made of GI tubing 40 mm size 1M length bend into size with mounting brackets nut bolt and washers all as specified and directed.

S&F MCB DB SPN 8 way ,IP-43, IK 09, double door type with metal door with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed.

S&F MCB DB SPN 6 way ,IP-43, IK 09, double door type with metal door with 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specified and directed.

Supply & Fix MCB SPN 40 to 63 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed.

Supply & Fix MCB SPN 32 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed.

Supply & Fix MCB SP 6 to 32 Amps current rating 'C' series 10 KA breaking capacitycomplete all as specified and directed.

Supply & Fix MCB SPN change over 40 Amps current rating 'C' series 10 KA breaking capacity complete all as specified and directed.

Supply and fixing TV socket outlet complete all as specified and as directed.

M & L sub main wiring with 2 runs of 10 sqmm main wire along with 1 run of 10 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good disturbed surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.(2x10sqmm+1x10 sqmm earth wire)

M & L sub main wiring with 2 runs of 06 sqmm main wire along with 1 run of 6 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed / surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good disturbed surfaces complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

Taking down existing exhaust fan/ceiling fan of any sweep after disconnecting necessary connection from ceiling rose to fan and deposit to MES store yard complete all as specified and as directed

S & F exhaust fan non metalic single phase 230 volt of size 250 mm sweep with louver incl necessary alteration in Aluminium or Iron window all as specified and as directed

S & F for ceiling fan, 230 Volts, 50Hz, 1200 mm sweep with down road, canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal including writting the MES Number with synthetic enamel paint complete all as specified and as directed.

Supply , fixing rigid non metallic PVC conduit fixed conceiled/on wall wherever necessary with all connected accessories 20 mm dia for cable TV connections complete all as specified and as directed

Supply, installation, commissioning and testing indoor type LT wall mounting Panel Board of minimum size 1.00 m (height) x 1.00 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable, including four compartment for fixing of six Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber/ PVC gasket of suitable size all sides of door, with Copper strip busbar of size 25 x 5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrographic insulators with nuts & bolts at both ends = 04 Nos. , made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 2.5 sqmm copper wire and connections of all outgoing / incoming existing cable of any size complete incl galvalume sheet for protection of LT panel from rain/water all as directed. ( Item No. 206.00 contd)

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

M&L for energy saving switches 3 module including metalic flush box 3 module with cover plate and frame complete all as specified and directed

M&L for LAN socket RJ 75 3 module including metalic flush box 3 module with cover plate and frame complete all as specified and directed

supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltrs BEE 5 star rated complete with all accessories such as safey valve, thermostat, NRV, connecion pipe etc complete all as specified and directed.

Supply and laying and testing Cable XPLE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 volts grade with stranded aluminium conductor of 16 sqmm 4 core all as specified and as directed.

M&L fine sand cushioning for cable protection in layers incl punning all as specified and directed. Note : Punned down thickness shall only be measured.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm all as specified and as directed.

S & F tubes, 'light grade,galvanised, with all fitting of size 40 mm laid in trenches for cable protection all as specified and directed.

Taking down ceiling fan/ exhaust fan/ wall fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 10 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Four runs of 10 sqmm cable, two runs of 10 sqmm cable and one run of PVC conduit will be measured as one unit

S & F for Box type (decorative) wall mounted LED light fitting including LED tube 4' x 20 watts with output of 2000 lumens, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

&L for Suspension (Pendant) luminaires 20 watts with efficient Diffuser ensuring perfectly uniform illumination, ensured optimised and unparalleled light distribution. Inter-connectable luminaires for aesthetically appealing downlight application includind necessary fixing the hanging wiresfrom RCC ceiling with suitable fastners,mounting end cap, making good diturbed surfaces with necessary mason and painting work to match with the existing surfaces all as specified and directed

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

M&L for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with onesingle pole MCB SP 20 Amps complete all as specified and directed.

M&L for Triple pole and earth encolsure with a three pin and earth plug with socket 415 Volts, 50 Hz complete with one triple pole MCB TP 32 Amps complete all as specified and directed.

S & F for energy efficient exhaust fan of 450 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint compelte all as specified and directed. Note :- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Jamna Constructions (BID ID -3378988)

sunway associates (BID ID -3379757)

RK CONSTRUCTION (BID ID -3379800)

r.s.jain & sons (BID ID -3379581)

M/S UnitedConstruction (BID ID -3387208)