REPAIR MAINT OF HOT WATER APPLIANCES, SOLAR WATER HEATER AND ALLIED WORKS AT FAIZABAD CANTT UNDER GE FAIZABAD

Amount

Taking down existing defective electric geysers of any make and any capacity (25/50 Ltr) vertical OR horizontal from its location servicing, by opening of pipe and disconnecting all electrical connection, cleaning of tank after opening of its assembly at site, cleaning of assembly pipe to avoid its choke up, checking of defective parts, necessary repair and replacement of defective parts to make the equipment functional to the entire satisfaction of engineer in charge and refixing geyser in its position including all electrical and pipe connection to geysers, testing and commissioning complete Note :- (i) The contractor will receive geyser complaints daily from MES service cell and complete the user complaints as directed by Engr-In-Charge. (ii) Complaints will be completed day to day, within 24hours failing which recovery shall be made from contractor @ Rs. 400.00 per complaint per day from reciept of complaint to actual date of completion of complaint . (iii) Labour for replacement of defective parts shall be deemed to be included in quoted rate of this item and spare parts shall be measured and paid for separately at 'Supply only' rates against respective item of Schedule 'A'.

Supply only, Heating element threaded/ screwed/ triangular or cup style type 1500 Watt ISI marked of suitable make without taking down Geyser complete all as specified and directed.

Supply only, Heating element threaded/ screwed/ triangular or cup style type 2000 Watt ISI marked of suitable make without taking down Geyser complete all as specified and directed.

Supply only, thermostat suitable for 25 or 50 litre capacity of geyser, range 20 to 80 degree ISI marked, without taking down geyser complete all as specified and directed.

Supply only, indicator lamp assembly with bulb suitable for geysers round or square type of approved make and quality as approved, without taking down geyser complete all as specified and directed.

Supply only, housing assembly for 25 Ltr Capacity ISI marked complete all as specified and directed..

Supply only, housing assembly for 50 Ltr Capacity ISI marked complete all as specified and directed.

Supply only, Safety valve (dead plug) small ISI marked complete all as specified and directed.

Supply only, Safety valve (pressure release valve) ISI marked complete all as specified and directed.

Supply only, Gasket for 25 Ltr Capacity assembly ISI marked complete all as specified and directed.

Supply only,Gasket for 50 Ltr Capacity assembly ISI marked complete all as specified and directed.

Supply only, glass wool in between the inner and outer container of geyser of any capacity complete all as specified and directed.

Supply only, bottom cover for geyser in two pieces made of GI sheet in required/ existing size and shape suitable for 25 litres capacity geyser including painting of two coats synthetic enamel paint over a coat of primer to match the existing complete all as specified and directed.

Supply only, bottom cover for geyser in two pieces made of GI sheet in required/ existing size and shape suitable for 50 litres capacity geyser including painting of two coats synthetic enamel paint over a coat of primer to match the existing complete all as specified and directed.

Supply only, top cover for geyser made of GI sheet in required/ existing size and shape suitable for 25 litres capacity geyser including painting of two coats synthetic enamel paint over a coat of primer to match the existing complete all as specified and directed.

Supply only, top cover for geyser made of GI sheet in required/ existing size and shape suitable for 50 litres capacity geyser including painting of two coats synthetic enamel paint over a coat of primer to match the existing complete all as specified and directed.

S&F in repairs, PVC connection cotton braided heavy duty with brass union/ coupling of length 450 mm with rubber washer suitable for 15 mm dia pipe for hot or cold water connection, without taking down geyser complete all as specified and directed.

S&F in repairs PVC connection cotton braided heavy duty with brass union/ coupling of length 900 mm with rubber washer suitable for 15 mm dia pipe for hot or cold water connection, without taking down geyser complete all as specified and directed.

S&F in replacement inner tank made of MS 1.6 mm thick suitable for 25 litre capacity geyser, complete all as specified and directed.

S&F in replacement inner tank made of MS 1.6 mm thick suitable for 50 litre capacity geyser, complete all as specified and directed.

M&L for one coat painting of Geyser at site by spray gun painting (without taking down Geyser) of 25 litre capacity with synthetic enamel paint including preparation of old surface and re-writing or marking MES number, complete all as specified and directed.

M&L for one coat painting of Geyser at site by spray gun painting (without taking down Geyser) of 50 litre capacity with synthetic enamel paint including preparation of old surface and re-writing or marking MES number, complete all as specified and directed.

S&F in replacement, outer shell of complete MS sheet duly painted for 25 Ltr capacity ISI marked complete all as specified and directed.

S&F in replacement, outer shell of complete MS sheet duly painted for 50 Ltr capacity ISI marked complete all as specified and directed.

Repair to leakage of inner tank 25/50 litre capacity geyser by brazing or soldering, including cutting of nut, bolt, washer etc, as required with gas welding cutter and provinding new nut, bolt, washer etc including testing of leakage of tanks, complete all as specified and directed.

S&F in repairs, Anchor bolts 5" length with nut and washers including making of holes in wall and making good as per existing speficification.

S&F in replacemet, plug and DBOXx MCB protected socket complete 20A MCB single pole, 240 volts complete all as specified.

S&F in repair, galvanised iron pipe, 25mm bore, medium grade, with all fittings & fixed complete to wall, ceiling or laid in floors all as specified and directed.

S&F in repair, stop valves 15 mm bore, brass chromium plated, concealed, screwed both ends for pipes or for unions including making good to match with existing surface complete all as specified and directed.

S&F in repair, plug top 3 pin,15 Amps complete all as specified and directed.

S&F in repair, Flexible copper lead 3 core of size 40/0.0076/2.5 sqmm, 1100 volt and making electric connection in geyser, complete all as specified and directed.

S&F in repair, Switch piano flush type single pole one way 15/16 Amps flush type complete all as spicified and directed.

S&F in repair, Piano type socket, 2 in 1, 5/15 Amps, 230 V capacity, complete all as spicified and directed.

Dismantling solar water heating system panel of 200 litres capacity, any make and type by removing the glass panel carefully and refixing it after cleaning dust, cleaning the water collector tubes and aluminium foil including descaling the existing hot water storage tank of any capacity and replacement of rock wool, complete all as specified and directed.

S&F in repair, 200 Ltrs capacity PUF insulated tank ISI marked suitable for flat plate collector system complete all as specified and directed.

S&F in repair, MS powder coated stand for 200 ltr tank of flat plate collector system complete all as specified ISI marked complete all as specified and directed.

S&F in repair, solar flat plate collector of 200 LPD capacity complete all as specified ISI marked complete all as specified and directed.

S&F in repair, collector leg (front) suitable for flat plate collector system of 200 LPD complete all as specified.

S&F in repair, collector leg (rear) suitable for flat plate collector system of 200 LPD complete all as specified ISI marked complete all as specified and directed.

S&F in repair, collector to tank inter connecting synthetic rubber hose suitable for flat plate collector system of 200 LPD complete all as specified.

S&F in repair, hose clip suitable for flat plate collector system of 200 LPD complete all as specified.

S&F in repair, EPDM gasket with centre hole suitable for flat plate collector system of 200 LPD complete all as specified ISI marked complete all as specified and directed.

S&F in repair, dummy gasket (EPDM) suitable for flat plate collector system of 200 LPD complete all as specified ISI marked complete all as specified and directed.

S&F in repair, dummy flange suitable for flat plate collector system of 200 LPD complete all as specified ISI marked complete all as specified and directed.

S&F in repair, M6x25MM SS-304 Nut bolt with flat and spring washer suitable for flat plate collector system of 200 LPD complete all as specified. ISI marked complete all as specified and directed.

S&F in repair, 13x8 PAN head screw suitable for flat plate collector system of 200 LPD complete all as specified.

S&F in replacement, 200 Ltrs capacity PUF insulation tank ISI marked with tube hole suitable for evacuated tube collector system complete all as specified and directed.

S&F in repair, MS powder coated stand for 100 ltrs tank ISI marked suitable for evacuated tube collector system of 100 LPD complete all as specified and directed. .

S&F in repair, 58mm(D) x 1800mm(L) vacuum glass tube ISI marked suitable for evacuated tube collector system of 100 LPD complete all as specified and directed.

S&F neoprene gasket (58ID) suitable for evacuated tube collector system of 100 LPD ISI marked complete all as specified and directed.

S&F tube holder plastic suitable for evacuated tube collector system of 100 LPD ISI marked complete all as specified and directed.

S&F black rubber ring suitable for evacuated tube collector system of 100 LPD complete all as specified.

S&F in repair, electrical back-up heater with inbuilt thermostat 2 KW suitable for flat plate collector/evacuated tube collector system of 200 LPD ISI marked complete all as specified and directed.

S&F in replacement, 15 mm dia heat proof ( pre insulated ) composit pipe for hot water distribution line with all fittings fixed to wall or ceiling/floor including taking down old unserviceable GI pipe ISI marked complete all as specified and directed.

S&F in replacement, 25 mm dia heat proof ( pre insulated ) composit pipe for hot water distribution line with all fittings fixed to wall or ceiling/floor including taking down old unserviceable GI pipe ISI marked complete all as specified and directed. .

S&F in replacement, 20mm dia bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends of iron pipe of size 20 mm dia complete all as specified.

S&F in replacement, 25mm dia bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends of iron pipe of size 25 mm dia complete all as specified.

M&L for cleaning and descaling water circulation system of rotational moulded polyethyline water storage tank upto 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixing in position complete all as specified.

S&F in replacement, 20mm dia ball brass valves, high pressure, with polyethylene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified.

S&F in replacement, 25mm dia ball brass valves, high pressure, with polyethylene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete all as specified.

S&F in replacement, 15mm dia bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm dia complete all as specified.

Taking down existing submain wiring of any description and M&L for sub main wiring with two runs of 4.00 Sqmm (nominal cross-sectional area) FRLS PVC insulated & unsheathed 1100 Volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLS PVC insulated & unsheathed single core multistranded copper conductor cable of size 4.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly from main DB to Sub DB including cutting chases and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified. Note:- (i) Two runs of cable, one run of earth wire and one run of PVC non metallic conduit shall be measured as one run length. (ii) Cable required for connection to DBs and MCBs shall be deemed included in quoted rates. (iii) Earth wire shall run inside the conduit pipe.

All as per srl item No. 62.00 here in before but submain wiring with two runs of 6.00 Sqmm FRLS PVC insulated copper conductor and one run of 6.0 Sqmm FRLS earth continuity conductor complete all as specified.

S&F in replacement, MCB SP 6 to 32 Amps, 230 Volts 'C' series 10 kA, including necessary connection complete all as specified and as directed.

m/s allied enterprises

M/S SS Tarders

M/s Hanspal Enterprises

Khan Brothers

Super Automobiles

Jairajyadav security services