Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.4 LAccepted-Finance | ₹38.4 L | L1 | Accepted-Finance Found lowest rate |
| 2 | L2₹40.7 L+₹2.3 L (6.10%)Accepted-Finance | ₹40.7 L+₹2.3 L (6.10%) | L2 | Accepted-Finance Quoted high rate |
| 3 | L3₹41.5 L+₹3.2 L (8.23%)Accepted-Finance R O BOGDANG | ₹41.5 L+₹3.2 L (8.23%) | L3 | Accepted-Finance Quoted high rate |
| 4 | L4₹41.8 L+₹3.5 L (9.02%)Accepted-Finance | ₹41.8 L+₹3.5 L (9.02%) | L4 | Accepted-Finance Quoted high rate |
| 5 | L5₹43.6 L+₹5.2 L (13.6%)Accepted-Finance | ₹43.6 L+₹5.2 L (13.6%) | L5 | Accepted-Finance Quoted high rate |
Tender Value
₹65.8 L
EMD Value
₹1.3 L
Closing Date
8 Aug 2026, 2:00 pmClosed
Executive Engineer REW Leh
REW Leh
Construction of Staff Quarter for RDD at Agling
2026_RDD_19280_2
30- UTL REW Leh of 2026-27
Open Tender
Civil Works - Others
Percentage
60 days
Leh
Please refer Tender documents.
3 documents required · 3 mandatory
₹660
Payable To Executive Engineer REW Leh
₹1.3 L
19 Aug 2026
29 Jul 2026
10 Aug 2026
29 Jul 2026
8 Aug 2026
29 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earthworkinsurfaceexcavationnotexceeding30cmindepthbutexceeding1.5
minwidthaswell as 10 sqmonplan includinggettingout anddisposal of
excavatedearthupto50mand lift upto1.5m, as directedbyEngineer-in
Charge:
2.1.1 All kinds of soil | 975.45 | cum | - | - |
| - | Earthworkinexcavationbymanualmeans infoundationtrenchesordrains(not
exceeding1.5minwidthor10sqmonplan), includingdressingof sidesand
rammingofbottoms, liftupto1.5m, includinggettingouttheexcavatedsoiland
disposal of surplus excavated soil as directed, within a lead of 50 m.
2.8.1 All kinds of soil. | 6.51 | cum | - | - |
| - | Providing and laying dry stone soiling any thickness incl. cost of stone | 23.76 | cum | - | - |
| - | Providing and laying in position cement concrete of specified grade excluding the
cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA)) | 23.76 | cum | - | - |
| - | Providing and laying 80mm thick faciory made cement in required colour and
pattern over and including 50mm thick compacted bed of coarse sand, filling the concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid joints with line sand etc. all complete as per the direction of Engineer-in-charge | 236.33 | sqm | - | - |
| - | Providing and laying at or near ground level factory made kerb stone of M 25 grade cement concrete in position to te required line level adarvature joint with cement mortor (1:3) complete job. | 15.2 | cum | - | - |
| - | Steel work welded in builtup sections/framed work, including cutting,hoisting, fixing in position and In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 715 | kgs | - | - |
| - | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shadewith ordinary paint of approved brand and manufacture | 49.75 | Sqm | - | - |
| - | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron) | 183 | kgs | - | - |
| - | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm | 31.21 | Sqm | - | - |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.18 MB
BOQ_45841.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .