SPL REPAIR TO BLDG NO NB-4 BLOCK AT AMC OFFRS MESS, AMC C AND C, BLDG NO P-107 AT NEIL LINE AND OTHER SANCTION WORK AT AGE BR-II UNDER GE (EAST) LUCKNOW

Amount

Taking down cement or cement lime plaster on brick or stone walls, etc any description complete all as specidied and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specidied and directed.

M&L 15mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:6. and finished even and smooth without using extra cement mortar complete all as specidied and directed.

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & chajja/roof/ceiling mixed, facia at any height with liquid water proofing compound as per manufacturer's instn surface finished even and smooth without using extra cement complete all as specified and directed.Note: WPC shall be measured and paid seperately.

M&L for rendering 5 mm thick in CM 1:3 on ceiling surface finished fair and even complete all as specified and directed .

Dismantling floor,hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specidied and directed.

M&L for glazed ceramic joint free coloured tiles in vertical surfaces 450x300x7mm/600x300x7mm thick, set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:3 complete all as specidied and directed.

M&L for coloured non skid ceramic jointless tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4 complete all as specidied and directed.

M&L for non skid ceramic (coloured) jointless tiles of 7-8 mm (square or rectangular) area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including 15mm thick screed CM 1:4 complete all as specified and directed.

M&L for coloured disigner vitrified ceramic tile flooring of size 600x600x8-10mm thick as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the suraface over screed bed or bedding layer 15mm thick in cement mortar 1:4 including roughening of old surface all as specified and directed.

All as per item No-10 above but as in dado/skirting with and incl 10 mm thick rendering in CM 1:4 complete all as specified and direceted.

Taking down chowkats with shutters not exc 1.5 sqm each (without taking off shutters from the frames) complete all as specidied and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4 Sqm each complete all as specidied and directed.

Taking down shutter exc. 1 sqm and not exc . 2 sqm each complete all as specidied and directed.

S & F UPVC door frames (single rebated) of size 60mm x 30 mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer intergral skin with suitable metal CSK screw complete all as specified and directed.

S & F factory made solid UPVC profile panel door shutter 28mm thick (style) with internal skin as frame and 3 mm thick presuure compact laminate on both sides of approved color as infill with C channel type GI or 40x20x19 mm of MS pipe as stiffener and fixing in frame complete all as specified and directed.

S&F pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including filling cement concrete type B-1 (1:3:6) filling and cpaction in frame complete all as specidied and directed.

S&F 125x60mm size of pressed steel frame for door with one or more rebates including necessary fixing lugs, lock striking plates, hinges, hold fast(40x3mm) etc. complete all as specidied and directed.

M&L for 30 mm thick flush shutters, solid core construction, with block board 3 core and plywood face panels, commercial type on both sides complete all as specidied and directed.

M&L second class hardwood glazed and skeleton door shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; and fitted to chowkats complete all as specidied and directed.

S&F anodised aluminium window with galzed and gauzed sliding type using 1.80 mm thick aluminium open three track section having size of style & top rails 83x44mm, bottom rails 100x44mm including anodised aluminium frame, including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, anodised aluminium fittings complete and including glazing by using 5mm thick plain sheet glass and stainless steel wire mesh of dia 0.36mm and apertue 1.4mm complete all as specified and as directed. Note: S&F of 5mm thick glass & SS wire mesh are included in the items.

M&L mild steel 300mm ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed.

M&L in repair mild steel 300mm ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long complete all as specified and directed.

M&L for fixing 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and directed.

S&F aluminium handles cast type anodised of 150mm complete all as specified and directed.

S&F 100 mm size butt hinges, stainless steel,complete all as specified and directed.

S&F 150 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed

S&F extruded brass handles, fabricated type polished 150mm long complete all as specified and directed.

S&F 200 mm long brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; pannelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed together with solvent cement complete all as specified and directed.

M&L for Factory made solid PVC door and window frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

M&L butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100 mmlong, type B-21 complete all as specified and directed.

S&F framed work such as grills, gratings etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.45mm minimal dia of wire and average width of aperture 1.18mm fixed with stanless steel staples to windows complete all as specified and directed.

Demolition of reinforced cement concrete of any position and any description not otherwise specifically provided for complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips Complete all as specified and directed

All as per item No 39 but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders

M&L for RCC 1:2:4 type B-1, 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors roofs, landing, balconies canopies, deck slabs, lintel and in shelves and the like complete all as specified and directed.

M&L 18 to 20 mm thick granite ( of any type ) work (table rubbed and polished) in steps, jambr, pillars window cills, cooking platform and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack wall mounted of overall minimum size 750x600mm and 250 mm deep, with partition for small/large plates etc made out of stainless steel 24 gauge, fixed with rawl plug and cp steel screws and weight of rack shall not be less than 3.8 kg complete all as specified and directed.

S&F in repair vitreous China, table top, wash hand basin of size 595 mm x 440 mm x 185 mm, fancy type including 32 mm dia waste coupling and waste pipe complete all as specified and directed Make : Jaquar, Model No.- KUS-WHT-35901 or equivalent as approved by GE.

S & F in repair vitreous china pedestal pan EWC (Couple Closet Bowl) of size 370 x 640 x 760 mm including UF seat cover, hinges, S trap-220 mm, accessories set etc and vitreous china ware flushing cistern of Make : Jaquar (Model No FNS-WHT-40201) complete al as specified and directed. Make of EWC : Jaquar (Model No- FNS-WHT-40751P) or equivalent as approved by GE.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, seat cover and flush pipe 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specidied and directed.

S&F in repair vitreous China wash basin white (flat back or angle back ) type of size 550mmx400 mm including brackets,brass cromium plated waste fittings and pvc wast pipe including cutting for and pinning in ends of bracket fixed complete all as specidied and directed.

S&F in repair CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. Make : Mark/Jaquare or equivalent as approved by GE.

S&F in repair CP brass telephonic type wall mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. Make : Jaquare or equivalent approved by GE.

S&F in repair CP brass 15mm fancy type telephonic shower rose suitable for connecting with wall mixture with necessary hook fixed. Make Jaguar cat No 7537 or equivalent approved by GE.

S&F long body bib cock fancy type 15mm dia chromium plated with cruter buterfly handle,serewed down,screwed for MS pipe or for brass ferrule Make Jaguar cat No 7037/ Ideal/Orient or equivalent approved by GE.

S&F in repair 15mm bore angle valve cast copper alloy with capstan head chromium plated screwed down high pressure with long shanks and fly nuts screwed complete all as specified and directed. Make - Jaquar Model 7053 or equivalent approved by GE.

S&F in repair 75 mm dia CP over head shower rose fancy type with adjustable arrangement complete all as specified and directed. Make: Jaquar model 7489 or equivalent approved by GE.

S&F in repair CP brass soap dish fancy type complete all as specified and directed. Make: Jaguar cat No 7731/ Ideal/Orient or equivalent approved by GE.

S&F health facuat for EWC CP hand hold with flexiable pipe,bracket etc complete set of superior quality complete all as specified and directed.Make Jaguar cat No-557 / ideal/orient or equivalent as approved by GE.

S&F in repair CP brass toilet paper holder complete all as specified and directed. Make Jaguar cat No 7751/ Ideal/Orient or equivalent as approved by GE.

S&F in repair towel rail 20mm dia with brass chromium plated 600mm long complete all as specified and directed. Make Jaguar Cat No-7711or equivalent as approved by GE.

S&F in repair towel ring 200 mm dia and made out of 8-10 mm dia hollow tubes superior quality complete all as specified and directed.Make Jaguar Cat pt No AQN-7721 or equivalent approved by GE.

S&F glass shelves fancy type 8 to 10 mm thick glass 550 mm long complete all as specified and directed.Make Jaguar Cat pt No AQN-7771 or equivalent approved by GE.

S&F in repair glass corner shelves fancy type 6 mm thick 225x225 mm size complete all as specified and directed. Make Jaguar Cat pt No ACN-1173 or equivalent approved by GE.

S&F in repair 15mm bore CP bib tap long body pattern with flange/cap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore CP pillar tap cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure fancy type with swan neck, screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore stop cock /angle cockcast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes complete all as specified and directed.

S&F in repair 15mm dia concealed stop valves concealed type CP with fancy type,chromium plated with long shank and cup, complete all as specidied and directed.

S&F in repair PVC connections, 450mm long with brass CP/PTMT nuts suitable for connecting 15mm bore pipes, superior quality complete all as specified and directed.

S&F for brass chromium plated shower rose 65 to 90 mm size with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed.

S&F in repair 20 to 25mm bore PVC coated fancy type curtain rod with fixing brackerts, stops, rollers etc complete allied fitting complete all as specified and directed.

S&F continuous (piano) hinges of size of flap 30 mm stainless steel, bright finish or electrogalvanised fixed with screw to timber/PVC frame work complete all as specified and directed.

S&F PVC Cupboard/ kitchen cabinet frame and shutter in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18mm thick PVC sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets and screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fitting as per site requitment as per make and specification mentioned as per drawing complete all as specified and directed. Make : RAJSHREE/ Prayag.

S&F for 20 mm dia heavy duty stainless steel hanging rod with end brackets and fixed with screw complete all as specified and directed

S&F 25 mm dia stainless steel curtain rod including SS brackets, SS fancy type end knob and SS wall to wall knob complete all as specified and directed.

S&F rubber beading 50 mm wide and fixed to door completed all as specified and directed.

Hacking out old borken glass any thickness size, quality or description for wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads completed all as specified and directed.

S&F 4mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in squire not exc 0.5 sqm each panes completed all as specified and directed.

Supply only sheet glass shelf assembley consisting of 5.5 mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and directed.

Demolition and breaking up 75 mm dia and above drain pipe( Salt glazed ware, AC,PVC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&l for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Taking up or down steel tubing and connections, 15mm bore and removing from site complete all as specified and directed.

Taking up or down steel tubing and connections, 20mm bore and removing from site complete all as specified and directed.

Taking up or down steel tubing and connections, 25mm bore and removing from site complete all as specified and directed.

S&F steel water tubes medium grade, galvanised with all fittings 15mm bore fixed complete to concealed in wall and ceiling or laid in floors complete all as specified and directed.

S&F steel water tubes medium grade, galvanised with all fittings 20mm bore fixed complete to walls and ceiling or laid in floors trenches complete all as specified and directed.

S&F steel water tubes medium grade, galvanised with all fittings 25mm bore fixed complete to walls and ceiling or laid in floors trenches complete all as specified and directed.

Labour for cutting and chaseing in brick wall for concealed GI tubing and making good not exc 10 cm in girth complete all as specified and directed.

Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridge complete all as specified and directed

S&F 500 Ltr rotational moulded polyethylene water storage tanks capacity, white colour, triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and including dismantling water tanks capacity exc 250 & n exc 500 ltrs, and removing to site complete all as specidied and directed.

S&F 20 mm PTMT float valve, high pressure with Polythene floot and flynut complete, screwed for Iron pipe etc complete all as specidied and directed.

S&F 25 mm PTMT float valve, high pressure with Polythene floot and flynut complete, screwed for Iron pipe etc complete all as specidied and directed.

S&F in repair 20mm dia gun metal gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specidied and directed.

S&F in repair for 20 mm brass gate valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F balll catcher with 8mm dia steel ball and brass body and strike plate magnet ball catcher for cupboard/ cabinet shutters complete all as specified and directed.

M&L preparing new untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specidied and directed.

M&L preparing old wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint complete all as specidied and directed.

M&L preparing new steel or iron surfaces of any description, exc 10cm in width or girth and two coats of synthetic enamel Paint over a coat of red oxide primer complete all as specidied and directed.

M&L preparing old steel or iron surfaces of any description, exc 10cm in width or girth and two coats of synthetic enamel paint complete all as specidied and directed.

M&L for one coat of painting with synthetic enamel paint on old steel surface (previously decorated ) including preparation of surfaces complete all as specidied and directed.

M&L for one coat of synthetic enamel painting including preparation of new wooden surface over 10 cm width or girth complete all as specidied and directed.

M&L for applying two coats of oil bound distemper over a coat of primer over Birla white wall putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed

M&L for preparation and applying two coats of oil emultion distemper over and including one coats of wall care putty, on new plastered surfaces complete all as specidied and directed.

M&L preparation and applying three coats of white wash on new plastered surface of wall complete all as specidied and directed.

M&L for preparation and applying two coats of cement base paint over a coat of cement primer on new plastered surface of wall complete all as specidied and directed.

M&L for preparation and applying two coats of cement base paint on old plastered surface of wall complete all as specidied and directed.

M&L preparation and applying one coat of white wash on old plastered surface of wall complete all as specidied and directed.

M&L preparation and applying two coat of white wash on old plastered surface on ceiling complete all as specidied and directed.

M&L preparation and applying two coat of white wash on new plastered surface of ceiling complete all as specidied and directed.

M&L preparation and applying three coat of white wash on new plastered surface of ceiling complete all as specidied and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depression of scrapped surfaces with putty and applying two coats of oil bound distemper complete all as specidied and directed.

M&L for two coat wall care putty on wall complete all as specified and directed

M&L for preparation of old decorated surfaces by brooming down or steel wire brushing,scrappingdown smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of ceiling including cornices,pilasters etc and applying one coats of white wash complete all as specidied and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depression of scrapped surfaces with putty and applying two coat of cement base paint complete all as specidied and directed.

M&L for complete removal of existing treatment on old plastered surface including necessary preparation, and applying two coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed

M&L for prepation of old decorated surfaces of wall by brooming down or steel wire brushing including cornices,pilasters etc and applying one coat of white wash complete all as specidied and directed.

Supply only integral water proofing compound, ISI Marked complete all as specidied and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specidied and directed.

M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) mixed with integral water proofing Chemical PIDI PROOF-LW mixed in proportion 200ml /50 Kg cement of DR Fixit of of pidilite industries Ltd or STP No.1 (liquid) of STP Ltd in proportion 200ml/50 Kg cement as in padding on roof surface for correcting/ making proper slope on roof, surface finished fair and even without using extra cement complete all as specified and directed.

M&L for Brushing neat cement slurry @ 3 Kg per Sqm mixed with super Latex (Dr. Fixit of pidilite Industries Ltd) or SBR Latex of STP Ltd. In ratio 1:4.7 (as per manufacture's instructions) for bond between old and new concrete under the anti seepage work complete all as specified and as directed.

Dismantling brick tiles or terracing tiles, single layer of roof complete all as specidied and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specidied and directed.

Taking down existing treatment any type/any thickness on roof including taking down/removing the backing bed concrete if any and dispose off at a distance exc 100m as directed etc complete all as specified and directed

M&L for brushing neat cement slurry with 3.0 Kg./Sqm over roof slab complete all as specified and directed

M&L for PCC 1:2:4, type B1 using 20 mm graded stone aggregate as in roof kerbs/ benching/ roof padding/ surface finished/ coved fillets etc rounded or chamfered on edges, complete all as specidied and directed.

M&L for PCC 1:2:4 type B-O by using 12.50 mm graded crushed stone aggregates as in benching coaping including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for roof treatment with certain specification given below as under complete all as specified and directed. (a) M&L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying a coat of bitumen primer@ 0.50 ltrs/sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/25 @ 1.20 KG/sqm (d) Applying and laying polymeric water proofing membrane weight not less than 3 kg/sqm (e) Applying a tack coat of hot blown botumen grade 85/25 @ 1.20 kg/sqm (f) Blinding with coarse sand dry @ 0.50 to 1.00 kg/sqm dusted over bitumen.

M&L for 25cmx25cmx22cm thick cement concrete tiles jointed and pointed in CM 1:4 mixed with linseed oil @ 5% by weight of cement over and including screed bed of 15mm thick in CM1:4 as bedding layer using 100% coarse sand complete all as specidied and directed.

Taking down loose filling of aggregate in any form from sunken slab and refiiling after treatment complete all as specidied and directed.

Demolition of brick work built in cement mortar or cement lime mortar including all of quoins, arches, pillars etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specidied and directed.

M&L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specidied and directed.

M&L fly ash Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

M&L for precast manhole cover slabs in RCC 1:2:4, type B-1, using 20 mm graded stone aggregate and set in CM 1:4 complete all as specidied and directed. Note: Reinforcement will be measured and paid for seperately)

M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in subbase of flooring/pavement, surface finished even & rough complete all as specidied and directed.

M&L for machine pressed precast concrete interlocking paver block glossy finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with grey cement and no pigment complete all as specified and directed.

M&L for shingle or crushed stone dust/Sand filling under floors or in paving laid in layers(thickness of each layer should not not exc 15cm thick), spread, levelled and rammed complete all as specified and directed.

S&F rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F prepainted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering,cladding to wall etc, fixed with self tapping screws ,complete all as specified and directed.

S&F false ceiling with 4mm thick E-board 'Everest' make white prelaminated set embosed reinforced designer ceiling board of approved texture fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section, runner made of 0.33mm GI sheet and angle made of 0.45mm GI sheet suspended with 2mm dia GI wire incl two coats of oil bound distemper complete all as specified and directed. Note:- All exposed surface of grid frame work shall be powder coated white.

M&L mild steel work conforming to Fe 410-0 or Fe 310-0 in bands, straps, hold fasts; hooks complete all as specified and directed.

S&F frame work as in door or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering.Doors, etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fitting and hanging, also fastening complete all as specified and directed.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sq. m in each pane complete all as specified and directed.

S&F powder coated aluminum Window sliding type three track with glazed and gauzed shutter (incl stainless steel wire cloth 0.36 mm nominal dia and 1.40 mm apreture and 3.8 mm thick plain glass) on wheel consisting frame of size 100 x 44 (sliding shutter consist of suitable size of section as specified and directed) with locking arrangement as approved fixed with rubber gas ket and aluminum beading etc including necessary cutting hole in wall complete all as specified and directed.

S&F in repair aluminum anodised grills of aperature 75 mm and fixed in frame of window and ventilator including necessary fixing arrangement etc complete all as specified and directed.

Providing and fixing anodised aluminium frame of section 100x44x1.60mm to 1.50mm thick fixed with rawal plugs and screw or wire expansion hold fasteners complete all as specidied and directed. make Jindal/Hindalco as approved.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or taking credit and making good the disturbed surfaces of walls, floors, etc. complete all as specidied and directed.

M&L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one switch complete all as specidied and directed.

All as per srl item No 153 here-in-before but one bell / buzzer point controlled by one bell push button on the same board with other switches or independent with cable 1.5 Sq mm size.

All as per srl item No 153 here-in-before but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 Sq mm size.

All as per srl item No 153 here-in-before but one 3 pin socket outlet 05 Apms point on the same board with other switches with cable 1.5 Sq mm size.

All as per Serial Item No 153 here-in-before but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size.

S&F switch piano flush type, single pole, one way, 05 Amps complete all as specified & directed.

S&F bell push, flush type, 05 Amps complete all as specified & directed.

S&F socket outlet 2 in 1, 3 pin, 05 Amps complete all as specified & directed.

S&F switch socket combination 2 in 1, 3 pin, 05 and 15 Amps, flush type, universal complete all as specified & directed.

S&F stepped type, electronic fan regulator, flush and socket type on the existing phenolic laminated sheet humfree 2 module ISI marked etc as required complete all as specified & directed.

S&F buzzer, Ding Dong, AC, 230 volts, single pole complete all as specified & directed.

S&F lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified & directed.

S&F in replacement of decorative wall mounting type LED light fitting, 1 x 15 Watt, 230 Volt made up of Polycarbonate including shade, lamp holder, 10 Watts LED lamp B22 CDL etc and all accessories pre-wired including connecting up complete all as specified and directed.Make :Philips, Cat No : 30575 (Comet) or equivalent in Havells, Cat No : LHDL06160099 (CITY 3).

S&F in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed. Make : Crompton, Cat No : LBHE-10-CDL or equivalent in Havells, Cat No : RUGBYNEONFT10WLED760SSYMBOPC, PHILIPS Cat no WT202WLED6SCWPSUS2PC

S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC,philips cat no TMC

S&F in replacement of LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. Make : Crompton or equivalent in Havells/ philips

S&F ceiling rose, 3 phase / PVC / polycarbonate, isolated body complete all as specified directed.

M&L for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

M&L for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed.

S&F in replacement of industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volt of 20 Amp, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make: - Legrand, Cat No. 5078 11 & 4085 93 or equivalent in Hager, Cat No : VYA120C & NCN120N or Schneider, Cat No : A9HMS220 & A9N1P20C

S&F in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, with 200 Amp rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make :-Legrand, Cat No. 5076 11 & 5079 13 or equivalent in Hager, Cat No : VYS08D & VYS08E or Schneider, Cat No : A9HSND08 & A9HSND08WB

S&F in replacement of sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volt, 04 way with 200 Amp rated copper bus bar and metal door with IP 54 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed Make :-Legrand, Cat No. 5077 50 & 5079 38 or equivalent in Hager, Cat No : VYV04PM & VYV00E or Schneider, Cat No : A9HVD04M & A9HVDXXWB and comprising of the following:- (a) MCCB, 125 Amp, 04 pole, AC, 415 Volt of 16 KA breaking capacity complete - 01 No. Make :-Legrand, Model : DPX 160, Cat No. 4200 16 or equivalent in Hager, Cat No : HDA126Z or Schneider, Cat No : LV516312 (b) MCB, SP, AC, 240 volt of 06 to 32 Amp, "C" curve, 10 KA breaking capacity - 12 Nos. Make :-Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No. NCN106N to NCN132N or Schneider, Cat No. A9N1P06C to A9N1P32C

S&F in replacement of MCB, SP, AC, 240 volt of 06 to 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :-Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No : NCN106N to NCN132N or Schneider, Cat No : A9N1P06C to A9N1P32C.

S&F in replacement of MCB, DP, AC, 240 volt of 32 Amp capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :-Legrand, Cat No. 4086 36 or equivalent in Hager, Cat No : NCN232N or Schneider, Cat No : A9N2P32C

Fixing only and connecting electric meters upto 25 Amps including taking down.

S&F exhaust fans single phase 230/240 Volts heavy duty metalicbody of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexibelwire 23/0.076 mm all as specified and directed. Make/Model:- Havells Turbo Force SP 1400/ Orient 300 mm Heavy Duty/ Bajaj Heavy Duty Maxx Air

S&F PVC air freshner 250 mm sweep AC single phase, 230/240 volts 50 Hz with louvers and making connection from ceiling rose with twisted copper flexible wire 23/0.076 mm all as specified and directed. Make:- Usha/ Bajaj/ Havells

Cutting walls any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in electrical plate No 3 on serial page No 497 of SSR part I - 2009 and connected to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

Skyline Encon

M/S SWATI CONSTRUCTION

R P construction company

rajan construction

KUMAR ENTERPRISES