EXTERNAL PERIODICAL AND ALLIED B/R WORKS AT CERTAIN BLDGS AT BANA SINGH ENCLAVE AND PHILLAURAH ENCLAVE UNDER AGE B/R-II OF GE (SOUTH) DELHI CANTT-10

Amount

M&L for complete removal of existing treatment under (OBD/Oil paint/ white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than1500, sending pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour & applying of wall care putty (Birla white) on any surface 1-2mm thick average layer then applying two coat of oil bound distemper on wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and ellorescent salts, trading oil, gresey spots etc, and applying one coat of cement base paint on wall complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and as directed.

M&L for 15 mm thick rendering with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement complete all as specified and as directed. Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories.

M&L for 10 mm thick rendering with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement on wall of up to three stories bldgs complete all as specified and as directed.

M&L for 5 mm thick rendering on ceiling surfaces with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement on wall of up to three stories bldgs complete all as specified and as directed.

M&L for applying two coat of oil bound distemper on new plastered surfaces wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and as directed.

M & L for applying 1 mm thick waterproof cement based putty @ 1Kg (undiluted) per Sqm of approved make or its equivalent over the plastered/old painted wall after scrapping to prepare the surface even and smooth, complete all as specified and as directed. Step 1) Mix the putty powered by adding 40-50% water and mix it with Asian Paints Trucare Putty mixer (Trucare Putty mixer capacity of min 2.5 kg putty per minute) or equivalant. Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spray machine of putty application of Asian Paints Trucare Graco spray Machine (Model: EH 230 DI) or equivalent having DC electric motor of 3.3 KW having flow speed of max 6 ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041” or by manual. Step 3) Allow 6-8 hrs time to dry the putty surface. Step 4) sanding of the putty surface with TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7”/9” to make the surface free from dust etc. by skilled labour.

M & L for applying one coat of acrylic waterbased interior/exterior grade primer @ 0.8 ltr (undiluted)/10Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Trucare Graco or equivalent having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and as directed.

M & L for applying two coats of smooth acrylic emulsion with rich matt finish having voc less than 50 grams per ltr complying leed criteria @ 1 ltrs (undiluted)/10Sqm diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application of Trucare Graco or equivalant having an electric motor of min 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface in both the coats of paint, complete all as specified and as directed. Note for Srl item No 7 to 10 :- 1. The tenderer shall submit the MOU towards triparty agreement between tenderer, Manufacturer of Paints from Asian Paints/Berger Paints/Goodlass Nerolac Paints and their Applicators, for material and execution of work from any of the said manufacturers. before excuting of work. 2. Terms of the MOU so entered between tenderes, Applicators and Manufacturers mentioned above shall also cover the gaurantee from manufacturer of paints for any defect in work executed by their applicator during the defect liability period of 4 Years. All other aspects with regard to payment, execution of work or other legal points shall be solely as decided between the tenderer, Paint manufacturer & Applicator. Department shall in no way be responsible for any complicacy arising at a later stage between the parties to MOU with regard to payments or execution of work. 4. The necessary steel scaffolding upto G+4 storeyed wherever required to execute the work shall be provided by the contractor with all safety equipments and the cost of providing scaffolding & safety equipments shall be deemed to be included in the quoted rates of the contractor and nothing extra shall be admissible on this account. 5. The work shall be executed in AOR of AGE B/R-II and is being restricted area and head loss etc shall be considered before quoting the rates by the contractor as nothing extra shall be admissible on this account.

M&L for old size Brick work with fly ash brick using old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, (up to G+3 story Bldg) including demolition of existing brick masonary complete all as specified and as directed.

M&L for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 including dismantling of existing mild steel/cast iron work of any description etc. complete all as specified.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer all as specified.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

M&L preparation of old painted steel or steel based surfaces by any discription not other wise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

Cutting of vegetation/scrubs plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4 type B1 with surfaces finished to match complete including scaffolding etc, complete all as specified and directed by engineer-in-charge.

S&F cast iron soil, waste and vent pipes (sand cast) 100 mm bore in any length with or without ears with cement joints fixed to walls/laid in trenches or in floor duly apply a coat of bitumenous black paint including stack clamps good quality at every one meter distance, including bolts and nuts and securing ends of stays to wall or roof including dismantling of existing cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia upto 100mm etc complete all as specified and directed.

S&F cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to walls/laid in trenches or in floor duly apply a coat of bitumenous black paint including stack clamps good quality at every one meter distance, including bolts and nuts and securing ends of stays to wall or roof including dismantling of existing cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia upto 75mm etc complete all as specified and directed.

S&F Cast iron bend (any radius) diminishing pieces or tapers 100 mm bore fitted with oval access door/Tee, union etc complete all as specified and as directed.

All as per srl item item No 20.00 here-in-before but 75mm bore.

S&F PVC (SWR) pipes 110 mm bore single socketed , in any length with rubber ring joints fixed to wall including dismantling of existing SWR/PVC/Salt glazed ware/AC or reinforced concrete pipe set in cement mortar complete all as specified and as directed.

S&F PVC (SWR) bend any radius for 110mm bore pipe complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight including dismantling of existing unserviceable concrete etc, complete all as specified and directed by engineer-in-charge.

M&L Running welding not exceding 6mm for iron wire mesh door and fixing of hinges of wooden flush door with iron door frame in repair including petty repairs material like screws/nails etc. to make it functional complete all as specified and directed by Engineer-in-Charge. Note :- Any items required to be replaced shall be paid under respective items completed all as specified and directed.

M&L for cement concrete 1:2:4 type B-0 (12.5mm graded crushed stone aggregate) as in steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles including demolition of existing unserviceable concrete etc. complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete including dismantling of existing unserviceable concrete etc. complete all as specified and as directed.

M & L for 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantling of existing unserviceable interlocking tiles etc. complete all as specified and as directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair including demolition of existing unserviceable concrete etc. complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thich screed bed or bedding layer in cement mortar (1:4), rubbing and polishing including dismantling of existing kota stone flooring etc. complete all as specified and as directed.

M&L for machine cut kota stone 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thich cement screed or bedding layer in cement mortar (1:4), rubbing and polishing including dismantling of existing kota stone on verical surfaces etc. complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new/old concrete or plastered surfaces (as in kerb stones etc) over a coat of primer including preparation of new surface complete all as specified and directed by Engineer in charge.

Supply and fixing in repair sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pan including hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads metal frame including punching or drilling out old glazing pins/spring clips complete all as specifiedand as directed.

S&F in repair stainless steel wire cloth, 0.63 mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors / steel windows, complete including welding wk and dismantling of old rusted stainless steel wire cloth, etc complete all as specified and as directed.

vineet pal (BID ID -3492096)

R.P Builders (BID ID -3492012)

M/S Parmod Johar (BID ID -3486806)

Baljeet Builders & Interior Decorators (BID ID -3486545)