Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹9.4 L
EMD Value
₹28,290
Closing Date
24 Dec 2022, 11:00 amClosed
Executive Engineer JSD PHE Mech Rural Division Sgr
Executive Engineer JSD PHE Mech Rural Division Sgr
Supply, Installation, Testing and Commissioning of 250KVA HT/LT Distribution Transformer (Level-2), 100KVA Voltage Stabilizer and Vertical open well Submersible pumping units at various WSSs of Sub-Division Srinagar
2022_PHE_199974_1
PHE/MRD/TS 138 OF 12/2022
Open Tender
Miscellaneous Works
Item Rate
15 days
Srinagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Supply, Installation, Testing and Commissioning of
₹28,290
16 Jan 2023
17 Dec 2022
24 Dec 2022
17 Dec 2022
24 Dec 2022
17 Dec 2022
Amount
S/T/C of 250 KVA (11/0.440KV), (Level II) 3 phase, neutral HT/LT power distribution transformer of following specifications:- Capacity = 250 KVA, 3-phase and Neutral. Operating conditions. Input = 11000 volts Output = 440 volts AC supply in 3- phase. Terminals:- Input = 3 No. HV bush rods with insulators, washer nuts etc. Output = 4 No. LV bush rods switch insulators washer, nuts etc. Core = High permeability core for heat dissipation fabricated out of suitable size and gauge strips. Transformer Coils = Suitable number of HV and LV coils in each. The transformer coils shall be fabricated out of superior quality aluminium wire / strips properly wound so as to make it flux leak-proof. Coolant: - The HV transformer shall be completely filled with superior grade transformer oil up to required level. Enclosure = The core, coils & bracket shall be enclosed in MS tank of suitable thickness with cooling conducts / fins on either side. The MS tank shall be painted in two coats of enamel synthetic paint and the tank shall be fitted with drain cock / plug and graduated glass tube oil level indicator. Besides above the whole assembly is to be carried to site and includes carriage, head load, all leads and lifts involved. • Supply installation testing and commissioning of GO set=01 no Note:- The Power transformer shall be supplied with manufacturers test reports/certificates. The manufacturer should be CPRI certified.
Supply, Installation, Testing & Commissioning of Vertical Type Open-well Submersible Pumping Unit for pumping raw water from sump (as per IS 14220 : 1994). The specification are as under: PUMP:- • Discharge : 25,000 GPH • Make : KSB/Kirloskar/M&P/Aqua/Grandfosis or equivalent • Head : 60 Meters (REST TECHNICAL SPECIFICATIONS AS PER ANNEXURE "A")
WSS Chuntwaliwar Stage 1st Providing, Installation, Testing & Commissioning of 100KVA voltage controller (REST TECHNICAL SPECIFICATIONS AS PER ANNEXURE "A")
M/s Shaheen Enterprises
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .