COMPREHENSIVE REPAIR AND MAINT INCL PERIODICAL SERVICES TO JCOs OR MD ACCN AT BANA SINGH ENCLAVE AND PHILLAURAH ENCLAVE UNDER GE (SOUTH) DELHI CANTT

Amount

M&L for complete removal of existing treatment under (OBD/Oil paint/ white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than1500, sending pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour and applying of wall care putty (Birla white) on any surface 1-2mm thick average layer including complete removing of existing tratments then applying two coat of oil bound distemper on wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Make Asian or equivalent.

M&L for complete removal of existing treatment under (OBD/Oil paint/ white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than1500, sending pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour and applying of wall care putty (Birla white) on any surface 1-2mm thick average layer including complete removing of existing tratments then applying one coat of oil bound distemper on wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Make Asian or equivalent.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and elllorescent salts, trading oil, gresey spots etc, and applying one coat of cement base paint on wall complete all as specified.

M&L for 15 mm thick rendering with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement including taking down of existing plaster complete all as specified and as directed. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast. Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories.

M&L for 10 mm thick rendering with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement on wall of up to three stories bldgs including taking down of existing plaster including taking down of existing plaster complete all as specified and as directed. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast.

M&L for 5 mm thick rendering on ceiling surfaces with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement on wall of up to three stories bldgs including taking down of existing plaster including taking down of existing plaster complete all as specified and as directed. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast.

M&L for applying two coats of cement base paint on walls after preparation of newly plastered surfaces complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying 1 to 2 mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coats of oil bound distemper on white or tinted over existing prepared putty base surface complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description not other wise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified.

M&L preparation of old painted steel or steel based surfaces by any discription not other wise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of newly plastered surfaces of walls and to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over 1mm thick wall care water proofing putty (Sanding of the putty surface before applying exterior primer / Acrylic Smooth exterior paint with TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7”/9” to make the surface free from dust etc. by skilled labour), complete all as specified and as directed. Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories. Make – Asian Paint (Apex Ultima Protek)/Berger Paint (Weather Coat Long Life – 10)/J K maxx (Maximo Ultra)/ Dulux Paints (Weather Shield) Elastomeric. Note – Primer should be compatible with the paint.

M&L for preparation of Old plastered surfaces of walls and to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over 1mm thick wall care water proofing putty (Sanding of the putty surface before applying exterior primer / Acrylic Smooth exterior paint with TruCare wall sander: L-01/H-01 or equivalent (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above having dia of 7”/9” to make the surface free from dust etc. by skilled labour), complete all as specified and as directed. Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories. Make – Asian Paint (Apex Ultima Protek)/Berger Paint (Weather Coat Long Life – 10)/J K maxx (Maximo Ultra)/ Dulux Paints (Weather Shield) Elastomeric. Note – Primer should be compatible with the paint.

Note:- 1. (Applicable to Srl items No. 1, 2, 11 & 12) At the time of uploading bids each tenderer shall upload a copy of MOU towards triparty agreement between tenderer, Manufacturer of Paints from Asian Paints/Berger Paints/Goodlass Nerolac Paints and their Applicators, for material and execution of work from any of the said manufacturers. Financial Bids of only those bidders shall be admitted whosoever shall upload a legitimate MOU. 2. Terms of the MOU so entered between tenderes, Applicators and Manufacturers mentioned above shall also cover the gaurantee from manufacturer of paints for any defect in work executed by their applicator for a period of 5 Years. All other aspects with regard to payment, execution of work or other legal points shall be solely as decided between the tenderer, Paint manufacturer & Applicator. Department shall in no way be responsible for any complicacy arising at a later stage between the parties to MOU with regard to payments or execution of work. 4. (Applicable to Srl items other than covered under above items). The necessary steel scaffolding upto G+3 storeyed wherever required to exevcute the work shall be provided by the contractor with all safety equipments and the cost of providing scaffolding & safety equipments shall be deemed to be included in the quoted rates of the contractor and nothing extra shall be admissible on this account. 5. The work shall be executed in AOR of AGE B/R-II and is being restricted area and head loss etc shall be considered before quoting the rates by the contractor as nothing extra shall be admissible on this account.

Supplying and laying of CPVC 20 mm dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass fitting (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down of existing GI steel tubing complete all as specified and as directed.

Supplying and laying of CPVC 25 mm dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass fitting (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down of existing GI steel tubing complete all as specified and as directed.

Supplying and laying of CPVC 32-40 mm dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass fitting (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down of existing GI steel tubing complete all as specified and as directed.

S&F in repairs PVC connections 450/600mm long with brass unions at both ends suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repairs 15 mm angle valve/ stop valves, cast copper alloy, chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and as directed.

S&F in repairs Bib tap brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore complete all as specified and as directed.

S&F in repairs 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15 mm dia WHB mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed.

S&F in repairs 15 mm dia Wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed.

S&F in repairs 15 mm dia Sink mixer chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified.

S&F in repairs brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe complete all as specified and as directed.

S&F chromium plated ABS body health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repairs 15 mm size brass chromium plated two way bib cock fancy type cast copper alloy complete all as specified and as directed.

S&F in repairs of plastic WC seat cover white / off white closed pattern with flat bottom end cover and mild steel CP hinging device complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) / EWC , white fixed in repair,including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging devicecomplete all as specified and as directed.

S&F in repairs PVC valveless, syphonic action type flushing cisterns 10 ltrs capacity, low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 450 x 300mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6mm but n.exc 9mm complete all as specified and as directed.

S&F in repair kitchen plate rack with four shelves made out of stainless steel sheet 1 mm thick overall size 920mm x 760mm x 250mm complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair without using extra cement complete all as specified.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) (in patches also) (area of each tile exceeding 0.06 sqm but not exceeding 0.36 sqm, in floors etc set and jointed with adhesive and pointed with epoxy grouts as per manufacture instruction to match over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete including dismantlling of existing floor tiles all as specified and as directed.

-------ditto ----- but on vertical surfaces as in skirting including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete including dismantlling of existing wall skirting tiles all as specified and as directed. all as specified and directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface, area of each tiles exc n.exc 0.72 Sqm (in patches also) set and jointed inwith adhesive and pointed with epoxy grouts as per manufacture instruction to match over & including 15mm thick screed bed in CM 1:4 complete all as specified & directed. match over and including backing coat/ plaster 10 mm thick on fair faces of brick work in CM 1:4 surfaces to receive tiles including dismantlling of existing wall tiles complete all as specified and as directed.

M&L for vitrified ceramic tiles (light shade), 7-8mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.72 sqm, as in floors set and jointedwith adhesive and pointed with epoxy grouts as per manufacture instruction to match over & including 15mm thick screed bed in CM 1:4 complete all as specified & directed. and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantlling of existing floor tiles complete all as specified and as directed.complete all as specified and directed.

M&L for vitrified ceramic tiles (light shade) 7-8mm thick (Square/ rectangular) area of each tile not exceeding 0.72 sqm as in skirting laid on 10mm thick cement plaster in CM (1:4) , with adhesive and pointed with epoxy grouts as per manufacture instruction to match over & including 15mm thick screed bed in CM 1:4 complete all as specified & directed. tiles including dismantlling of existing wall tilescomplete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-22mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thich screed bed or bedding layer in cement mortar (1:4), rubbing and polishing including demolition of existing unserviceable kota stone flooring etc. complete all as specified and as directed.

M&L for machine cut kota stone 20-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thich cement screed or bedding layer in cement mortar (1:4), rubbing and polishing including demolition of existing unserviceable kota stone flooring/skirting etc. complete all as specified and as directed.

M&L Granite slab 16 to 18 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges including demolition of existing unserviceable Granite slab etc complete all as specified and as directed.

S&F 4 mm thick plain sheet / frosted glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square including hacking out old brockn glass / new fixing provision (any thickness, any size or at any height) complete all as specified and as directed.

M&L for old size brick work with flyash/sub class bricks straight or curved on plan exc. 6mtr mean radius built in cement mortor 1:6, including demolition of existing brick work complete all as specified and directed by engineer-in-charge.

M&L for 15mm thick rendering with ready mix plaster (in patches) on fair and other than fair faces of brick or concrete surfaces finished even and smooth without using extra cement, levelling the surface, curing etc including taking down existing wall plaster complete all as specified and as directed. Note :- Rate is included for necessary scaffolding up to G+3 Storey Bldgs etc required for plastering.

S&F three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 500 litres capacity (cylindrical vertical with closed top) white colour hoisted and fixed in position including 25mm bore PTMT ball valve high pressure with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms / 40mm, screwd for iron pipe or brass ferrule including 20/25 mm size Gun metal, globe or gate valvees, with iron wheel head, screwed both ends for iron pipe and fixed complete including dismantling of existing water tanks of any type/pattern not exc 500 ltr and removing from site of work complete all as specified and as directed.

Disconnecting existing tanks exc 250 Ltrs but n.exc 500 Ltrs capacity, setting aside (or lowering if required) and and re-fixing in same position after cleaning the tank complete all as specified and as directed.

S&F stainless steel 25 mm dia 01 mm thick of approved quality curtain rod with two numbers stainless stell brackets/hook (either wall to wall or else) as per approved quality and diesign (for each 01 mtr of rod) fixed in brick/concrete wall and same finished knobs on each end of each piece of curtain rod complete all as specified and directed by engineer-in-charge.

S&F for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws or welding confirming to Fe.290.Gde-E-165, including dismantling of existing wrought iron or mild steel / cast iron work of any description complete all as specified and directed by engineer-in-charge. Note :- Contractor shall be bounded to carryout repair / maint upto G+3 storey building and the rate shall be deemed including scafolding / double scafolding, safety equipments and misc accessories.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames), complete all as specified and directed by engineer-in-charge.

Taking down shutter of any descreption exc. 1.00 sqm but not exc. 2.00 sqm each, complete all as specified and directed by engineer-in-charge.

S&F fabricated aluminum window/ventilator with frames (Powder Coated) including jointing cleats for fixing builder's hardware & provision for glasspanes/wire mesh including necessary fittings/fixture /aluminum snap beads etc, complete all as specified and as directed by Engr-in-Charge. Note:- (a) Glazing/Wire mesh shall be measured under respective item seperatly (b) Items shall be paid as per weight of of aluminium sections (c) The rates quoted shall be inclusive of neoprene beading glazing clips, screws, etc as required whichshall not be measured for arriving the weight (d) The rate shall be inclusive of locking arrangement including fixing of aluminium hinges & tower bolt in each shutter complete all as specified and as directed.

S&F (Supply and Fix) (Powder Coated) aluminium decorative grill made out of aluminium alloy conforming to IS:733 and IS:1285, fabricated to required shape and size, anodised to required shade, fixed to window / ventilator / door frames including necessary fixing arrangements, screws, cleats and making good disturbed surfaces complete all as specified and directed by Engr-in-Charge

S&F in repairs Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and nontoxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge. Note: -For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e., depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges shall be paid separately under relevant item).

S&F in repairs Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers( wood powder/ rice husk/ wheat husk) and non toxic additives ( max toxicityindex of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr in charge.Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made.

S&F in repairs factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows & other frames/chowkhat of size 65 x100 mm comprising of vigin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ricehusk/wheat husk) and non toxicadditives (maximum toxicity index of 12 for 100 g,s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.(MS hold fast/hugs or SS dash fasteners shall be paid for separately) Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F in repairs Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.

S&F in repairs 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item

S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2020), complete all as specified and directed by engineer-in-charge.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed by engineer-in-charge.

M&L for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified.

M&L for pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, with decorative face veneer on both faces with lipping/ frame to match including wooden bedding work complete all as specified and as directed.

S&F 35 mm thick factory made IInd class hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/ gauge etc. divided into squares edges of framing plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/ gauge etc. size of members of shutters, complete all as specified and directed by engineer-in-charge.

S&F in repair stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/ steel windows complete all as specified and as directed.

S&F stainless steel butt hinges, size 100 mm complete, complete all as specified and directed by engineer-in-charge.

S&F stainless steel barrel tower bolts, 200 mm long, complete all as specified and directed by engineer-in-charge.

S&F stainless steel handles, 150 mm long, complete all as specified and directed by engineer-in-charge.

S&F stainless steel sliding door bolts 250mm long with hasp, staple (bolt type) fixing clips of sheet cast, fixing bolts, complete all as specified and directed by engineer-in-charge.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer all as specified.

S&F in repairs Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N (Face) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets. Note :- All necessary fittings and fixtures like nickle plated clip hinges, knobs etc complete all as specified and directed. (a) Pattern & design of WPC board to be decided by GE. (b) Items like, magnetic Catcher, cupboard 100mm SS handle, and CP Clip/continuous (piano) hinges,mild steel, bright finish or electrogalvanised, width of flap (when open) is 30mm, Haps & Staple deemed to be included in the quoted rate. (c) The quoted rates are deemed to be including dismantling/taking down of existing boards/shutter of any type and description.

S&F in repairs cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints fixed to walls/laid in trenches or in floor duly apply a coat of bitumenous black paint including dismantling of existing pipe complete all as specified and directed.

All as per srl item above but 75mm bore pipes fixed to wall/trenches ditto.

S&F in repairs Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door/Tee, union etc all as specified.

All as per srl item above but 75mm bore ditto.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints fixed to wall including dismantling of existing SWR/PVC/Salt glazed ware/AC or reinforced concrete pipe set in cement mortar etc. complete all as specified and as directed.

S&F in repairs PVC (SWR) bend/Tee, Socket/floor trap any type etc. any radius for 110mm bore pipe

Cutting of sapling/bushes/grass including cutting of trunk n.exc 30cm girth and branches and digging out roots from floor or roofs and walls of up to three storied bldg including plumbing shafts etc and making good the dismantled portion in cement mortar 1:3 to match the existing surfaces including brooming roof and removing all waste from roof to ouside the MoD land complete all as specified

M&L for Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar

M&L for Demolition of mud in roof, any thickness, including plastering and leeping upto two storey bldg incl necessary scaffolding arrangement complete all as specified and directed(whether full thickness removed or only a part there of) and removing from cantonment area or as directed complete all as directed by Engr in charge and specified.

M&L surface to be cleaned properly with wire brush to remove dust/loose particles from the surface. All the cracks should be opened in V groove and sealed properly with polyurethane sealant or polymer modified mortar. The surface should be oil and dirt free & in case of any unsound surface replastering to be done properly after application of SBR bonding coat. unsound horizontal surfaces to be filled with free-flowing micro concrete over and including single component Solvent based moisture cured polyurethane resin based low viscous highly penetrative primer to be mixed properly with electric mixture and to be applied by brush/roller over the entire surface. The deposition of primer should be minimum 200ml/Sq.mt however the same can be varied based upon surface porosity. Note : All as above deemed to be included in qouated rate.

M&L Two coats of Single component non-UV resistant based polyurethane to be applied over the primed surface in an interval of 4-6 hrs. The topcoats should be applied with brush/ roller. No dilution is required for these two coats. A non-woven geotextile sheet of 60 GSM to be sandwiched between the layers. The deposition of PU should be 1.8 kg per Sq.mt providing avg thickness of 1.2 mm. The tensile strength of the product should be minimum 1.8 N/mm2. The elongation of the free film should be min 650% as per ASTM D412, Shore A Hardness should be min 45 as per ASTM D-2240, Crack Bridging @-9degree C min 1.5 as per ASTM C 836 & Solid Content should not be less than 90%. Moreover, the material should confirm to ASTM C-836, ASTM C-898.

M&L for Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) with water proofing compound as per manufacturer instruction in roof pedding in panels with 10mm wide construction/ dummy joint and filling the panel joints with Polyurethane Sealant. , finished even and smooth without using extra cement laid over and including separation Layer-Loosely lay minimum 150 GSM Geotextile (non-woven polyester) with a min of 75 mm wide overlap for Protection of PU layer as in item No

M&L for 15 mm thick rendering with readyimix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast. Note :- Rates for water proofing compound/ polymer deemed to be included in the above rates.

M&L for providing and applying a bond coat of Latex:Water:cement - 1:4:6 consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete.

Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. Drilling Holes : Drilling holes 10mm diameter in masonary structure along the side of the joint as per manufacturer's instructions so as to cross the brick/ block at the intervals spacing of 15-30cm depending on extent of rising dampness as per recommendation of engineer in charge. Cleaning of holes : Clean the holes by air blower prior to fixing nozzles. Install latex polymer packer injection packers 9.8mm diameter, 10cm long in the holes and tighten. Fix the packer securely using sealent. Cutting of Packers : Cut the packers after completion of grouting without damaging structural elements.

Supply and apply of a 3 part, very low viscous, elastic polyacrylic injection resin with a versatile and adjustable reaction time having Mixed viscosity : 3-11 M.pa.s at +20 Deg C, Reaction time : adjustable according to ambient temperatrure and execution requirement between 8-50 mins, pH – 9-10, tested as per Wissbau No. 2002-094-(1A) – Function test with re-injectible hose system. The holes should be drilled until a depth of approx 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump injcection of polymer resin compound at >20 bar into or behind fissures or into masonry joint which are allowing water to infiltrate into unwanted areas. If voids in masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout. When movement stops or polymer compound appears at the packer move to the next packer and inject. If the dampness is heavy, inject similarly at next joint line

M&L for Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate on chajjas n.exc 1.5 Sqm to rounded or chamfered to provide concave slope , including providing a 5 mm layer with CM 1:3 adding waterproofing chemical as per manufacturer instruction and top layer of 1-1.5mm thick water proof putty and water proof paint including necessary form work etc. complete all as specified and as directed. Note : Cost of above deemed to be included in above quaoted.

Taking down carefully aluminium/copper point wiring (light/fan/bell/socket /power) with complete fittings such as steel terminal boxes, switches, ceiling roses, pendents, regulators, sockets etc and removing the material including making good the distrubed surfaces of the wall flooring ceiling etc to match the existing surface all as specified and directed by Engr-in-Charge.

M&L for concealed point wiring complete with stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit and including replacement of unserviceable pressed steel terminal boxes with Modular steel terminal boxes factory made including white cover modular plate with frame suitable for modular switches, modular sockets, modular fan regulators etc of required size complete including 1.5 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one 5 Amp switch one way using cable (1.5 Sq mm for phase and neutral and 1.5 sqmm for earthing) . Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash complete. The make of metal box shall be the same make of switches and sockets .

All as per item No above but 89 Amp socket outlet on same board.

All as per item No 89 above One socket outlet 5 Amps on independent board.

All as Item No 89 above but for one socket outlet 5/15 Amps on Independent board with cables 2.5 sqmm size for phase and neutral and 2.5 Sqmm for earthing complete.

All as Item No. 89 above but for one light point controlled by two 2-way switches with cable 1.5 Sqmm size.

M&L for concealed point wiring complete with stranded copper conductor 4 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable drawn through concealed PVC conduit complete including 4 sqmm copper cable earth continuity wire to common earth and connected to earth dolly complete all as specified for one socket outlet for modular AC Box on Independent board with cables 4.0 sqmm size for phase and neutral and 4 Sqmm for earthing complete. Note:- the rate is inclusive cutting /chasing and making good the disturbed surface with cm 1:3 and same surface finishes with the adjoining surface of disturbed area with OBD/colour wash/white wash complete

S&F switch modular type, 1 way 6A, 1module. (IP-21)

S&F switch, Modular switch 2 way 6A, 1 module. (IP-21)

S&F Modular Socket, 6A - 2/3 pin 2 module. (IP-21)

S&F Modular AC box with socket and MCB SP 20 Amp complete with Metal box , white colour plate and frame complete in replacement of sheet metal enclosures as per site requirement , complete all as specified and directed.

S&F switch modular type 1way 16A, 1module with indicator (IP-21)

S&F Socket 6A/16A - 2/3 pin combined . (IP-21)

S&F of electric bell Ding Dong type AC, 230 volts single phase all as specified.

S&F Modular Bell push 6A 1 module (IP-21)

Supply and fixing LED lights fitting 22W LED 6000K (4ft) (Warm/ Warm White), 220V, AC decorative box type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED lights fitting 2feet, 10W, 220V, AC (Warm/ Warm White) decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size.

S&F in replacement of lamp holder Angle/ Batten type bakelite insulated body with back plate all as specified and directed.

S&F of LED lamp 12 Watt LED Re-Chargeable Bulb complete all as specified and directed.

Taking Down of ceiling Fan and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed.

Taking Down of Exhaust Fan and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed. Note for 107 & 108 : The serviceing greasing and replaced old unsv connected minor items and make in functioning complete is deemed in this quoted item rate).

S&F Fan step regulator, 120W - 2 module type complete all as specified and directed.

S&F in replacement decorative wall light mounting suitable for LED lamp upto 12 Watt including all connections complete all as specified & directed.

Supply and fixing round shape 15 watt round recess (warm/ warm white) 220 volts AC recessed type with high efficiency PMMA diffusersoft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F in replacement of LED bulk head in engineering plastic housing with clear prismatic diffuser, 10W WHITE including all accessories connecting up twin core flexible copper conductor cable complete all as specified & directed.

S&F ceiling rose surface Bakelite 65x25mm three terminals complete all as specified.

Taking Down of Geyser and keeping in safe coustody and refixing it back after completion of B/R work complete all as specified and directed. Note : The servicing / descalling and make in functional complete is deemed in this quoted item reat.

S&F PVC connection with brass nipple 15 mm x 600 mm long with ISI marked, stainless steel, suitable for hot and cold water of 25 ltrs capacity of geyser as hot and cold water connection complete all as specified and directed.

Supply and fix in replacement of DB SPN 16 Way with metal double door, (IP43 Protection) flush mounting epoxy powder control having 100 Amps rated bus bar complete all as specified and directed .

S&F in replacement MCB SPN 63 Amps 'B' series, breaking capacity 10 Ka, 'B' curve 240 volts, 50 Hz including necessary incoming and out going electric connection with suitable size of copper lugs etc.

S&F for MCB SP 6 to 32 Amps 240 Volts, 10kA, 'B' curve all as per site requirement and as directed.

Supply and fixing in replacement Switch piano, flush type single pole, one way 5 Amps 3 pin, ISI marked for the same board complete all as specified and directed

Supply and fixing in replacement socket outlet 2 in 1, 3 pin, 5 amp flush type ISI marked for the same board complete all as specified and directed.

Supply and fixing in replacement switch socket combination 5 Amps 2 in 1 flush type multipurposes for independent board complete all as specified and directed.

Supply and fixing in replacement socket outlet 3 pin, 15 Amp, flush type, ISI marked complete all as specified and directed.

Supply and fixing in replacement switch piano 15 Amp, flush type single pole, ISI marked 16 AX Amps One Way switch omplete all as specified and directed.

The furniture articles shall be prepaired smooth after removing dents or tightning the frame with welding if required or providing any screw/ nut & washir if required, applying putty for planning of surfaces. All new parts/ area where there is no old paint exists, one coat of primer of best quality as approved shall be applied. The painting shall be done after prepration of surfaces paint OG/ Black/ White/ Sky Blue/ Grey replacing the existing shade/ colour achieving its glossy look. Rest all as directed by Engr in charge/ Accepting officer.

Chair Varandha

Charpoy IP Ply Top : FD/MAP-II/01

Rack Shoe Steel

Teapoy Varandha

Material and labour for polishing to the wooden furniture articles. Polishing the articles shall be cleaned up with a clean cloth and applying suitable sandpaper paper to remove dirt/ dust. The furniture articles/ parts shall be prepaired smooth after removing dirt/ dust etc, making wooden surfaces smooth by applying wood filler and putty on cracks / jonts and applying suitable colour to the base for prepration of base. Two coats of best quality polish as approved shall be applied for glossy look. The polishing shall be done only after prepration of surfaces. Rest all as directed by Engr in Charge/ Accepting Officer.

Bed Plywood Top : FD-246/247

Chair Dining : FD-279/16/250/228/MAP JCO-OR

Chair Easy : FD/-229/201/17

Peg Table : FD-277/384, DB-3973

Stool drssing

Table Centre : FD-274/ 235

Table Dining JCOs/ OR

Table 3 x 2

Teapoy : FD-278, 34, 382

Note for the above works :The contractor is required to provide a person proficient in speaking English & Hindi with a mobile with a SIM, computer, printer & internet connection to access the Complaint Mgt Portal for taking complaints through call VYNUS (Online Complaint Management System) & whatsapp. The place for establishing the complaint cell will be provided by GE. The ibid person shall note down the complaint in register & deploy resources for cleaning complaints within working hours. The report of complaint shall be noted in the register and shall be shown to AGE/JE every day before closure of office/ working hours.Rates for ibid service is deemed to be included on quoted rates of BOQ.

JYOTI ENTERPRISES (BID ID -3498491)

P R Constructions (BID ID -3505071)

A R construction (BID ID -3497859)

BEHAL TRADERS (BID ID -3504114)

AMIT ASSOCIATES (BID ID -3505014)