SPECIAL REPAIRS TO BLDG NO T 113 AND T 114 AT SOUTH CAMP AT ATS BELAGAVI

Amount

B/R WORKS :- Dismantling asbestos cement (Corrugated, semi corrugated etc) sheets in roof coverings including ridges and considering under Sch of credit complete all as specified and directed.

Material and labour 6 mm thick Non asbestos cement corrugated or semi corrugated sheet in roof fixed with 'L' or 'J' type or cranked hook bolt and including one number GI washer and bitumen washer all as specified and directed.

Material and labour 6 mm thick Non asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with 'L' or 'J' hook all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section in any position (unframed work) for purlins, rafters and considering under Sch of credit complete all as specified and directed.

Material and labour in second class hardwood clean sawn timber as in scantling framed and fixed for purlins and rafters all as specified and directed.

Dismantling wall and ceiling boards (Fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, frame work and considering under Sch of credit complete all as directed.

Material and labour for powder coated Aluminium snap grid (minimum 50 microns thickness powder coating) of size 605 x 605 mm with anodised aluminium angle of size 25mmx25mm x1.5mm thick and main & cross T of size 40mm x 25mm x 1.5mm thick for false ceiling including fixing of supporting hangers all as specified and directed . Note :- Cost of hangers will be measured & paid seperately under relevant items of this schedule.

Supply and Fix GI Hangers 6 mm dia (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed.

Supply and Fix 12 mm thick Gypsum board of size 600 x 600 mm in ceiling fixed with screws and finished with two coats of oil bound distemper over a coat of self primer all as per manufaturers instructions complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc.15cm thickness (below or above ground level) all as specified and directed.

Material and labour for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of interlocking tiles all as specified and directed.

Material and labour for hard core of broken stone aggregate gauge not exceeding 63 mm deposited spread and levelled in layers n exc 15 cm thick, watered and well rammed to a true surface all as specified and directed.

Supply only Sand cushion as under floors of paver blocks/tiles compacted by using plate compactor or other suitable mechanical method etc, all as directed.

Material and labour for Machine pressed rubber moulded coloured precast concrete interlocking paver blocks/tiles , any shape & size with grey cement and pigment confirming to IS-15658-2006 M-35 of 60 mm thickness over 50 mm thick mm grade sand cushion all as directed. Note: Sand cushioning will be measured and paid seperately .

Material and labour 25 mm thick PCC 1:2:4 type B1, using 20 mm graded stone agg as in floor finished without using extra cement all as specified and directed .

Material and labour for Joint free Non skid coloured tiles superior finish grade B-1 quality 7 to 8 mm thick(square/ rectangular) area of each tiles exc.0.18 sqm but not exc 0.38 sqm in floor with rectified edges etc set and jointed in neat cement slury over and including cement screed bed 15 mm thick in CM (1:6) all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided all as specified and directed .

Demolition of brickwork or stone/boulder masonary, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Taking down of chowkats with shutters (without taking off shutters from the frames) and refixing in same opening n exc 1.5 sqm each all as specified and directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour Rendering 10 mm thick cement plaster in CM 1:4 for fair faces of brickwork or concrete surfaces wall finished even & smooth without using extra cement all as specified and directed.

Material and labour for coloured Non skid coloured tiles superior finish grade B-1 quality 7 to 8 mm thick(square/ rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm in floor with rectified edges (joint free) etc set and jointed in neat cement slurry over cement screed 15 mm thick in CM1:6 all as specified and directed.

Material and labour for Coloured glazed ceramic tiles economy finish Gde B-II (b) quality of size 300 x 400 x 7 mm thick with rectified edges as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and incl 10 cm thick backing coat with CM 1:4 all as specified and directed.

Material and labour for pre cast cement concrete block masonry type C1, 1:3:6 (20 mm graded agrregate) solid blocks 10cm thick (with plain or interlocking joints as directed) having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified

Removal of concrete and plaster debris to a distance of 5 Km and depositing where directed at a level n exc 1.50 m above the starting point complete all as specified and as directed.

Taking down of chowkats with shutters (without taking off shutters from the frames) exc 1.5 sqm and n exc 4 Sqm each all as specified and directed.

Taking down shutters of any description exc 2 Sqm each as specified and directed.

Material and labour for Mild steel work as in hold fast, wall ties,bands, straps or similar small articles conforming to Fe-290 Gde E-165 etc.complete all as specified and directed.

Material and labour Second class hardwood chowkats and frames Plain, solid, straight, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed

Supply and Fix 35 mm thick second class hardwood rail & style plain framed pannelled factory made shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS1003 (part I) kiln seasoned and chemically pressure treated all as specified and directed.

Supply and Fix 140 mm floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Supply and Fix in repairs 140 mm floor door stopper of aluminum alloy body and tongue,anodised with hard drawn steel spring fixed in floor all as specified and directed.

Supply and Fix 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

Supply and Fix in repairs 200 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

Supply and Fix Butt hinges 100 mm long medium Weight cold rolled mild steel and fixed all as specified and directed.

Supply and Fix150 mm long extruded aluminium alloy anodised handle fabricated type all as specified and directed.

Supply and Fix in repairs 150 mm long extruded aluminium anodised handle fabricated type all as specified and directed.

Supply and Fix 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast of extruded section and fixing bolts and sliding bolts extruded sections or cast aluminium alloy and fixed all as specified and directed.

Supply and Fix in repairs 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet, cast of extruded section and fixing bolts and sliding bolts extruded sections or cast aluminium alloy and fixed all as specified and directed.

Supply and fix in repairs steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

Supply and Fix 3 mm thick figured glass pin head type and glazing with oil putty in square n. exc 0.5 sqm in each pane all as specified and directed.

Material and labour for factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube suppling and fixing in opening as per specification and drawing all as specified and directed.

Supply and Fix factory made solid panel PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm thick plain colour PVC sheet on back face as per specification and drawing with particle board core all as specified and directed.

Supply & Fix in repairs Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia. 1.3 m long, and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing all as specified and directed.

Supply & Fix Vitreous China Squatting pan, "Orissa" pattern, size 580 x 440 mm white with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia. 1.3m long, and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and directed.

Supply and Fix Vitreous china urinal, bowl type (flat back or corner wall type) of minimum size 465 x 355 x 265 mm white with grating and union for discharge pipe, providing and fixing plugs, waste pipe, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

Supply and Fix Vitreous China Ware Wash hand basin white, flat back, size 580 x 450 mm size (for Hospital use) with 15 mm bore pillar taps fancy type, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and 32 mm dia., Waste fittings, wash down taking, brass chromium plated for wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

Supply and Fix PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed.

Taking down 25mm bore steel/PVC tubing and connection including bib taps, stop cock, showers etc. all as directed.

Taking down 15 mm bore steel/PVC tubing and connection including bib taps, stop cock, showers etc. all as directed.

Supply and Fix in repairs 15mm stop valves fancy type, chromium plated, screwed down, high pressure, with crutch or round handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.

Supply and Fix 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors in short lengths all as specified and directed.

Supply and Fix 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and directed.

Supply and Fix 25 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and directed.

Supply and Fix in repair 15mm bib taps fancy type chromium plated round handle, screwed down, screwed for iron pipe all as specified and directed.

Supply and Fix in repairs Chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union all as specified and directed.

Supply and Fix in repairs tubular brass chromium plated Towel rail 20 mm dia D type 60 cm long between flanges all as specified and directed.

Supply and Fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor all as specified and directed.

Supply and Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall/ floor all as specified and directed.

Supply and Fix PVC (SWR) vent cowl 110 mm dia all as specified and directed.

Supply and Fix PVC (SWR) Junction single, (single T) equal or unequal with access door 75 mm bore pipe all as specified and directed.

Supply and Fix PVC (SWR) Junction single, (single T) equal or unequal with access door 110 mm bore pipe all as specified and directed.

Supply and Fix 75 mm bore PVC (SWR) bends of any radius with access door all as specified and directed.

Supply and Fix 110 mm bore PVC (SWR) bends of any radius with access door all as specified and directed.

Supply and Fix (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia inclduing fixing to existing pipe properly with solvent cement all as specified and directed

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m depth in hard/dense soil for foundation etc or for shaft, wells, manholes, pier holes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

Material and labour for PCC 1:4:8, type D-2 (using 40mm graded trap stone agg) as in mass concrete complete all as specified and directed.

Material and labour for pre cast cement concrete block masonry type C1, 1:3:6 (20 mm graded agrregate) solid blocks exc 10cm in width having minimum compressive strength of 50 kg/sq cm as per IS 2185 (Part I) 2005 and set in cement mortar 1:4 complete all as specified

Material and labour Cement concrete 1:2:4, type B-1 using 20mm grade crushed stone aggregate as in benching and forming channel inside manholes, including finished smooth and even using extra cement all as specified and directed.

Material and labour Cement concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in coping including necessary form work all as specified and directed.

Material and labour 15 mm thick cement plaster in CM 1:4 for wall finished even & smooth without using extra cement all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds etc. all as specified and directed.

Precast RCC 1:2:4 type B-1 ,using 20 mm graded stone aggregate as in cover slab, set and jointed in CM 1:4 including necessary form work . Note : Reinforcement shall be measured and paid seperately .

Material and labour TMT steel bars 10mm dia and over cut to length, bent to shape required including cranking bending, hooking for ends and binding with mild steel wire annealed not less than 0.9mm dia all as specified and directed.

Material and labour for TMT steel bars of 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Returning filling in including spreading levelling and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed.

Removing excavated material (soils) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and directed.

Material and labour for preparation of external old plastered surfaces of walls by complete removal of existing treatment including washing, rubbing and cleaning and applying two coats of antifungal paint over a coat of primer all as specified and directed.

Material and labour for complete removal of existing treatment of old surface of walls by scrapping and washing including prepration of surface by applying a thin layer of wall putty and applying two coat of oil bound distemper all as specified and directed .

Material and labour for preparation of new wall surfaces and applying a thin layer of wall putty (JK or Birla) and applying two coat of oil bound distemper all as specified and directed

Material and labour preperation of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying a coat of synthetic enamel paint (ordinary tint) all as specified and directed.

Material and labour Cement concrete type B1, 1:3:6 using 20mm graded stone aggregate, 75 mm thick as in plinth protection including finishing of concrete surface even and smooth without using extra cement all as specified.

Material and labour PCC 1:2:4, type B-2 , using 40mm graded stone aggregate as in mass concrete complete all as specified and directed.

Supply and Fix framed work as water tank staging/gates of angle or other section with gusset/ base plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering, running rails and guides) and hanging also fastening and fixing Fe 410W (Gde-E-250) quality A complete all as specified and as directed.

Supply and fixing plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 290 (Gde E-165) complete all as specified and directed.

Supply and fix rotational moulded polyethylene water storage tanks of 2000 ltrs capacity (cylindrical/ vertical with closed top) hoisted and fixed in position all as specified and directed in SSR part I inlcuding fixing of PTMT ball valve epoxy coated aluminium rod and high density plastic ball of 40 mm dia as per site condition.

Material and labour for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified.

Supply and Fix 40mm bore medium grade galvanised tubes with all fitting and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed by the Engineer-in-Charge.

Supply and Fix 40mm Gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

Supply and Fix 25mm Gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed.

Supply and Fix mild steel bolts, dia of neck exc 20mm n. exc. 25mm purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long embedded in RCC complete all as specified and directed

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter fair finished surfaces flat complete all as specified and directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions vertical or to batter fair finished surfaces flat complete all as specified and directed.

Material and labour RCC 1:2:4, type B1 using 20 mm graded stone aggregate nominal mix for foundation, including rafts, footings, foundation beams, plinth beam, bases for columns etc basement slabs, underreamed piles and mass concrete complete all as specified and directed.

Material and labour RCC 1:2:4, type B1 using 20 mm graded stone aggregate nominal mix for columns, pillars, piers, posts, and struts complete all as specified and directed.

Material and labour for Plain mild steel wire, galvanised class 3, 4 mm dia in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc. and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed.

E/M WORKS:- Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for considering under credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specied and directed .

Taking down carefully unserviceable main switches/DB's from their position and removing materials from site all as specified and as directed .

Taking down existing sub main wiring with aluminum conductor cable of 2 of 4/6/10 sqmm with GI earth wire on and including wooden batten and removing materials from the site and making good distrubed surface of walls and and roofs complete all as specified and as directed by Engr-in-Charge .

Material and Labour for point wiring with PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable for one light point controlled by one way switch, and wire to be drawn in and including PVC casing capping 20/25 mm width complete with all accessories including MS sheet metal 1.2mm thick switch board with helium sheet cover or PVC rectangular switch board of suitable size to be fixed on wall respectively including white washing/colour washing/distempering to match the disturbed surfaces including PVC unsheathed multi stranded 1.5 Sqmm FRLS copper Cable as earth continuity connected with common earth dolly complete for the following all as directed by Eng -in Charge

One light point controlled by one, one way switch 5 Amp complete

One fan point controlled by one, one way switch 5 Amp complete

One 3 pin socket outlet 5 amp on independent board.

One 3 pin sockt outlet 5 Amp on the same board with other switch

All as per srl item No 102 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for piont wiring and 2.5 sqmm as in earth conduity conductor.

Supply and fix switch piano flush button single pole one way 5 Amp 240 V all as specified and as directed .

Supply and fix switch socket combination 2 in 1,3 pin 5 Amp flush type 240 volts complete all as specified and as directed .

Supply and Fix socket outlet 3 pin ,5 Amp ,flush type all as specified and as directed .

Supply and Fix swicth socket combination 2 in 1,3 pin 16 Amp flush type 240 volts complete all as specified and as directed .

Supply and Fix ceiling rose surface backelite three terminal 240 volts complete all as specified and as directed .

Supply and Fix fan regulator, electronic, step type , flush mounting complete all as specified and as directed.

Supply and Fix REGAL Batten for LED tube with single LED Lamp 1x 20 w, Ultra bright glass LED Tubelight with very high efficacy suited for installation in T5/T8 fitting with lamp holders etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed Make & Model No for Batten : Havells Cat No REGALBATTEN5UPTO1X18WDSBSWH and LED Lamp Havells Cat No CRYSTEL 1213T8DSTL20WLED865SGLASS or equivellent model of Make specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.176 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Sub main wiring with two single core stranded copper conductor unsheathed PVC insulated FRLS cable 1100V grade with 6 sq mm drawn through suitable size of non-metallic PVC rigid conduit/casing caping of suitable size with one run 6 sqmm copper conductor FRLS cable as earth conductor and conduit/ casing & caping accessories fixed up in surface/ recessed as required, including connecting up complete all as specified and directed. NOTE ;- Two runs of 6 sq mm cable and one run of 6 sq mm earth continuity copper conductor and one run of PVC conduit / casing caping shall be measured as one unit

Supply and Fix sheet metal enclosure factory made double door for DB 240 volts with 200 Amps rated bus bar SPN 4 Way scomplete all as specified and as directed .

Supply and Fix sheet metal enclosure factory made double door for TPN 4 Way 415 volts with 200 Amps rated bus bar complete all as specified and as directed .

Supply and fix in repairs MCB TPN 40 Amps 240 volts, 50 Hz AC supply complete all as specified & directed .

Supply and fix in repairs MCB SPN 32 Amps 240 volts, 50 Hz AC complete all as specified & directed .

Supply and fix in repairs MCB SP 06 to 32 Amps 240 volts, 50 Hz AC supply complete all as specified & directed .

Taking down ceilng fan/exhaust fan,dismantling blades and removing fan and blades to store, Painting of fans complete in situ with synthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc and refixing ceiling fan and connecting up including provision of cable from ceiling rose or connector of fan .

Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 5 of SSR Part-I and testing on completion.

Supply and Fix ASTRA NEO LED street light made of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP-66 protection with SPD LED street light of 20 Watt all as cat part no .LSTS-20-CDL-M of Crompton makeor equivalent model of other Makes specified in List of Manufacturers with sutable size bracket made to shape using 32/ 40 mm dia GI pipe light grade of 1.4 mtr length including MS clamps 25 x 4 mm - 02 Nos with nut bolts washers complete. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.176 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings.

Supply and Fix LED Light fitting 28 Watts of size 2 x 2 LED edge-lite luminaries suitable for armstrong/grid ceiling complete for low celing application with LED Drive of 28 Watts complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as directed Model No : Havells Cat No ENDURASLIMPROPLUS2X2PLR28/36LED840MOD and Drivers cat part No. LEDDRIVER36V28WS or equivalent model of other Makes specified in List of Manufacturers. NOTE:- 1) For details please refer Particular Specification Clause No. 18.24. on Sl Page No.176 of tender documents. 2) Bidders are advised to read the description alongwith particular specifications before inserting their rates. 3). The Contractor shall print CA No and date of completion on each LED light fittings. .

M/s S N Atiwadkar

Vinayaka Enterprises

DHAIRYASIL RAMAKANT DESAI

G K CONSTRUCTIONS